#guitar — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #guitar, aggregated by home.social.
-
Robert Jon and the Wreck/ Eric Gales - “Come Together / They Don’t Know outro” Live 2025
-
Chords for this song. Mastering Nicotine by The Flying Vees. A good workout for your fretting hand. Give the vocal score a look. Arrangement:
https://chordyes.com/chord/the-flying-vees-nicotine
#guitar #chords #american #malevocalist #rock #addiction #heartbreak
-
Chords for this song. Mastering Nicotine by The Flying Vees. A good workout for your fretting hand. Give the vocal score a look. Arrangement:
https://chordyes.com/chord/the-flying-vees-nicotine
#guitar #chords #american #malevocalist #rock #addiction #heartbreak
-
Chords are accessible. Feeling Quiet When You're Listening by Rum Jungle. Start harmonizing. Sheet:
https://chordyes.com/chord/rum-jungle-quiet-when-you-re-listening
#electricguitar #bassguitar #australian #indierock #malevocalist #guitar #introspective
-
Chords are accessible. Feeling Quiet When You're Listening by Rum Jungle. Start harmonizing. Sheet:
https://chordyes.com/chord/rum-jungle-quiet-when-you-re-listening
#electricguitar #bassguitar #australian #indierock #malevocalist #guitar #introspective
-
There's been another gap since I tooted, so I browsed through the photos I've taken in recent months and came across these. There were all taken on the day before my birthday, 1 August. The one of the table was sent to our family WhatsApp groups. Luthier and brother-in-Law, Andy, responded, so he was sent the other two.
#coaster #fender #guitar #stratocaster #strings #ernieball #musical
-
There's been another gap since I tooted, so I browsed through the photos I've taken in recent months and came across these. There were all taken on the day before my birthday, 1 August. The one of the table was sent to our family WhatsApp groups. Luthier and brother-in-Law, Andy, responded, so he was sent the other two.
#coaster #fender #guitar #stratocaster #strings #ernieball #musical
-
There's been another gap since I tooted, so I browsed through the photos I've taken in recent months and came across these. There were all taken on the day before my birthday, 1 August. The one of the table was sent to our family WhatsApp groups. Luthier and brother-in-Law, Andy, responded, so he was sent the other two.
#coaster #fender #guitar #stratocaster #strings #ernieball #musical
-
There's been another gap since I tooted, so I browsed through the photos I've taken in recent months and came across these. There were all taken on the day before my birthday, 1 August. The one of the table was sent to our family WhatsApp groups. Luthier and brother-in-Law, Andy, responded, so he was sent the other two.
#coaster #fender #guitar #stratocaster #strings #ernieball #musical
-
There's been another gap since I tooted, so I browsed through the photos I've taken in recent months and came across these. There were all taken on the day before my birthday, 1 August. The one of the table was sent to our family WhatsApp groups. Luthier and brother-in-Law, Andy, responded, so he was sent the other two.
#coaster #fender #guitar #stratocaster #strings #ernieball #musical
-
Added this hit. Share Again by The Gerbils. Perfect for some jangly guitar playing. Nice master. Try this groove out. Chart:
https://chordyes.com/chord/the-gerbils-share-again
#guitarchords #music #american #malevocalist #guitar #chords #tutorial
-
Added this hit. Share Again by The Gerbils. Perfect for some jangly guitar playing. Nice master. Try this groove out. Chart:
https://chordyes.com/chord/the-gerbils-share-again
#guitarchords #music #american #malevocalist #guitar #chords #tutorial
-
Added this hit. Share Again by The Gerbils. Perfect for some jangly guitar playing. Nice master. Try this groove out. Chart:
https://chordyes.com/chord/the-gerbils-share-again
#guitarchords #music #american #malevocalist #guitar #chords #tutorial
-
Added this hit. Share Again by The Gerbils. Perfect for some jangly guitar playing. Nice master. Try this groove out. Chart:
https://chordyes.com/chord/the-gerbils-share-again
#guitarchords #music #american #malevocalist #guitar #chords #tutorial
-
Added this hit. Share Again by The Gerbils. Perfect for some jangly guitar playing. Nice master. Try this groove out. Chart:
https://chordyes.com/chord/the-gerbils-share-again
#guitarchords #music #american #malevocalist #guitar #chords #tutorial
-
The singer Bruce Springsteen knew made America better
Credit: Disney Plus Sat 19 September 2026 0:00, UK Bruce Springsteen has always wanted to stand for the…
#NewsBeep #News #Music #americana #BruceSpringsteen #Entertainment #Folk #Folkrock #Guitar #PeteSeeger #UK #UnitedKingdom
https://www.newsbeep.com/uk/775324/ -
ok folk, my daughter told me #bones s04 features #billygibbons from #zztop
#cool
#guitar -
ok folk, my daughter told me #bones s04 features #billygibbons from #zztop
#cool
#guitar -
ok folk, my daughter told me #bones s04 features #billygibbons from #zztop
#cool
#guitar -
ok folk, my daughter told me #bones s04 features #billygibbons from #zztop
#cool
#guitar -
ok folk, my daughter told me #bones s04 features #billygibbons from #zztop
#cool
#guitar -
I'm pitching an animation job to a client.
I fired up FlipaClip for the first time in months and found this thing I did. Time to go pro, eh?
Music by Dmitrii Kolesnikov from Pixabay
-
Take The A-Train by Clarence Gatemouth Brown and Roy Clark
-
Take The A-Train by Clarence Gatemouth Brown and Roy Clark
-
Gibson Honors Gustavo Cerati With Ultra-Limited Guitar Available Exclusively at Gibson Garage Miami
-
“[…] We have to be loud on behalf of the Palestinian people, we have to be loud on behalf of the trans #community, we have to be loud for people who are living in poverty […]” –Carrie Brownstein 🖤
Sleater-Kinney at the Salt Shed in #Chicago tonight! If you ever get a chance to see them live, please do omg. Carrie is a #rock god. Her stage presence… 🥵
They’re on tour with Liz Phair right now!
#Palestine #TransRights #LGBTQ #Indie #Punk #Music #Musician #Guitar #LiveMusic #Concert #Outdoors
-
“[…] We have to be loud on behalf of the Palestinian people, we have to be loud on behalf of the trans #community, we have to be loud for people who are living in poverty […]” –Carrie Brownstein 🖤
Sleater-Kinney at the Salt Shed in #Chicago tonight! If you ever get a chance to see them live, please do omg. Carrie is a #rock god. Her stage presence… 🥵
They’re on tour with Liz Phair right now!
#Palestine #TransRights #LGBTQ #Indie #Punk #Music #Musician #Guitar #LiveMusic #Concert #Outdoors
-
“[…] We have to be loud on behalf of the Palestinian people, we have to be loud on behalf of the trans #community, we have to be loud for people who are living in poverty […]” –Carrie Brownstein 🖤
Sleater-Kinney at the Salt Shed in #Chicago tonight! If you ever get a chance to see them live, please do omg. Carrie is a #rock god. Her stage presence… 🥵
They’re on tour with Liz Phair right now!
#Palestine #TransRights #LGBTQ #Indie #Punk #Music #Musician #Guitar #LiveMusic #Concert #Outdoors
-
“[…] We have to be loud on behalf of the Palestinian people, we have to be loud on behalf of the trans #community, we have to be loud for people who are living in poverty […]” –Carrie Brownstein 🖤
Sleater-Kinney at the Salt Shed in #Chicago tonight! If you ever get a chance to see them live, please do omg. Carrie is a #rock god. Her stage presence… 🥵
They’re on tour with Liz Phair right now!
#Palestine #TransRights #LGBTQ #Indie #Punk #Music #Musician #Guitar #LiveMusic #Concert #Outdoors
-
Added this to the site. Figuring out Rondo Anak Limo by Bardolo Iva Jeniva. A classic dangdut tune. Practice it today. Source:
https://chordyes.com/chord/bardolo-iva-jeniva-rondo-anak-limo
#guitar #chords #indonesian #duet #dangdut #javanese #tongkrongan
-
Added this to the site. Figuring out Rondo Anak Limo by Bardolo Iva Jeniva. A classic dangdut tune. Practice it today. Source:
https://chordyes.com/chord/bardolo-iva-jeniva-rondo-anak-limo
#guitar #chords #indonesian #duet #dangdut #javanese #tongkrongan
-
-
Putting this one up. Rocking Dog On A Toolbox by James Bonamy. Good song for a jam session. The ambiance is great. Try the chorus. URL:
https://chordyes.com/chord/james-bonamy-dog-on-a-toolbox
#guitar #chords #american #malevocalist #country #90s #humorous
-
Putting this one up. Rocking Dog On A Toolbox by James Bonamy. Good song for a jam session. The ambiance is great. Try the chorus. URL:
https://chordyes.com/chord/james-bonamy-dog-on-a-toolbox
#guitar #chords #american #malevocalist #country #90s #humorous
-
2026 50/90 Challenge Day 75/90
Day 75’s progress was the same as day 74’s just without the hoopla. I mixed one song. The project was already technically complete with day 74’s one song, but having 51 songs done and having the project 102% complete is also pretty cool.
Days 76 through 79 are likely going to be shut out. As insanely busy as our trip to California has been this far, it is about to get much busier. I might not get anything more done on this project before I get home. Just as a heads up.
#5090 #Guitar #Music #Recording #Songwriting -
Hi friends!
I need a small guitar help. I took a two week break from my guitar, and now when I press on frets 2-8, lower strings almost get muted because they touch multiple frets at the same time.
Why would that be? Can it be from the heat? It might have left it under under direct sun a couple of times. The neck seems straight. I can lift the strings from the screw on the body, but that is not a proper fix, is it?
Thank you in advance!
-
Hi friends!
I need a small guitar help. I took a two week break from my guitar, and now when I press on frets 2-8, lower strings almost get muted because they touch multiple frets at the same time.
Why would that be? Can it be from the heat? It might have left it under under direct sun a couple of times. The neck seems straight. I can lift the strings from the screw on the body, but that is not a proper fix, is it?
Thank you in advance!
-
Hi friends!
I need a small guitar help. I took a two week break from my guitar, and now when I press on frets 2-8, lower strings almost get muted because they touch multiple frets at the same time.
Why would that be? Can it be from the heat? It might have left it under under direct sun a couple of times. The neck seems straight. I can lift the strings from the screw on the body, but that is not a proper fix, is it?
Thank you in advance!
-
Hi friends!
I need a small guitar help. I took a two week break from my guitar, and now when I press on frets 2-8, lower strings almost get muted because they touch multiple frets at the same time.
Why would that be? Can it be from the heat? It might have left it under under direct sun a couple of times. The neck seems straight. I can lift the strings from the screw on the body, but that is not a proper fix, is it?
Thank you in advance!
-
Hi friends!
I need a small guitar help. I took a two week break from my guitar, and now when I press on frets 2-8, lower strings almost get muted because they touch multiple frets at the same time.
Why would that be? Can it be from the heat? It might have left it under under direct sun a couple of times. The neck seems straight. I can lift the strings from the screw on the body, but that is not a proper fix, is it?
Thank you in advance!
-
Photo of the Day 23rd June 2026.
https://madcam.co.uk/2026/06/23/photo-of-the-day-23rd-june-2026/
-
Photo of the Day 14th June 2026.
https://madcam.co.uk/2026/06/14/photo-of-the-day-14th-june-2026/
-
Photo of the Day 14th June 2026.
https://madcam.co.uk/2026/06/14/photo-of-the-day-14th-june-2026/
-
I return, with more photos!
So, I know I didn't post for 2 weeks, but that was for a valid reason: I can't really make a meaningful progress post with just one photo, now can I? I've done it before, yes, but that was when it was something that caused both me and my aunt to literally burst out laughing. That one was special. Either way, though, I'm back, and I have new photos! First up, the photo from 2 weeks ago:
![media-1]
Different environment from normal, and that's because we ended up moving to behind the workshop because we were getting a lot more sun than normal. Now, that may seem like a "steak too juicy, lobster too buttery" thing, but we were doing this 2 weeks ago, in what was essentially a heatwave. Not bad weather for working on guitars, but generally not decent for the British climate, which is "temperate". I consider myself to not live in the "temperate rainforest" bits of the UK, but Manchester is just coastal enough to feel it during the winter and summer, especially when we get the remains of the big storms from the US East Coast.
Anyway, you might think that it was done using a router. Well, actually, it was done "handraulically". If you haven't come across that one before, it's just a fun way of referring to manual, hand-level work. In essence, we carved that out using quarter-inch, half-inch and full-inch bevel chisels, along with that gouge there, and another quarter-inch gouge chisel. The idea is that we - yes, we, I actually had a real, proper hand in this bit - we would use the bevel chisels to mark along the sides of that Crimson Guitars router template I got in April. If you look back at the images from the previous guitar post, you'll notice it sat on top of the radius block we were using for the fretboard.
Anyway, the idea there was, of course, scribe into the cavity using the negative of the full cavity's positive. Don't worry, it makes sense - the template operates as a sorta matryoshka doll, in that it comes as 4 interlocked pieces: the main piece of MDF, the overall trem cavity shape, the spring and claw cavity, and the bridge block cavity. We used the overall cavity shape, with the spring & claw and bridge block cavity pieces removed, to manually carve out the trem spring cavity.
Speaking of the bridge block cavity, evidently the assumption is that, y'know, you'd go in from the top halfway, come out, flip over, and rout out the other half from the back, plus the spring/claw cavity. Small issue with that: we're not even slightly doing this normally. Remember, handraulics over power tools. As such, we ended up drilling out about a 14mm cavity where the bridge block goes. From there, we carved out the spring cavity until the top edge of the trem claw (i.e., where the springs don't hook on) was flush with the rebate for the trem cavity backplate. Speaking of that, we got that done yesterday:
![media-2]
![media-3]Yeah, that's totally worth 3 or 4 hours of work. Probably the first time in the entire build we've used a push saw, instead of a pull saw - and no, bandsaws don't count. Now, for the record, I still have no idea what I want to do for the control cavity backplate, but I have no less than four ideas, currently:
Idea 1: the Les Paul Personal, a semi-circular backplate with rounded "corners".
Idea 2: the Jackson Soloist backplate, a scalene triangle with rounded points.
Idea 3: the standard PRS "Boomerang" backplate shape, which is a distorted heart or, y'know, boomerang shape.
Idea 4: some other bullshit I'll probably figure out later.One thing I'm certain on doing with the trem cavity backplate is, instead of six separate holes for the strings, like you see on vintage-style Stratocaster backplates, I'm going for one contiguous hole, a little bigger than the dimensions of the bridge block. I have experience with the vintage-style Strat backplate, and, long story short, I hate it. Even when it's just one string you're dealing with, like if you accidentally over-tightened the high E or G strings (the B string never seems at fault), there is a seemingly much-higher-than-zero chance that the ball-end of the string will randomly flop into the trem spring cavity. Mind you, that's on the Fretless, and honestly, I should really have made that using a string-through hardtail body. Oh well.
Now then. Further planning: what the hell do we do next? Well, as you would expect, we still need to put the fretboard on, and also put the frets in. More importantly, we need to carve out about… 4 or 5mm from the trem spring cavity, plus 0.5mm from the rebate of the trem backplate. You might be wondering why we need to remove up to 5mm from the cavity. Long story short, to prevent one of the main issues with trem springs, that being resonance, we're going to put each spring in heat shrink, which will dampen the springs while doing jack to the actual function of the trem.
From there, we've got quite a few things to do - we need to finish the craters for the knobs, we need to do the rebate for the switchplate to sit in (we could leave it proud, but good lord, no thank you, already got enough finger injuries), we need to actually open up the control cavity so we can do the wiring, which is kinda crucial for it to function (obviously), we need to do the finish, we need to put together the bocote pieces together. Then, from there, we actually need to do the wiring. It doesn't sound like much, but it's a pretty big workload. In fact, if you actually think about it, it's a hell of a lot of work, and I'm surprised this has only taken 1 and a bit years.
Do I think we'll get this done by August? Hopefully so. I don't really care if we get it done by then or not, it's just that it'd be really nice if we could get it done by then. But yeah, that's about it.
Catch ya on the flipside!
#guitar-building #guitar #lutherie #“the-Crusader”-scratch-build #takosader's-ramblings #takosader's-ramblings:-copper-edition #(copper-is-the-29th-element---much-like-how-iron-is-the-26th) #i-can't-wait-for-this-to-be-done #maybe-we'll-finally-figure-out-whether-or-not-this-thing-will-sound-great-or-sound-terrible. #because-that's-the-dichotomy-here #either-it's-gonna-sound-*really*-good-or-*really*-naff #because-it's-4-different-types-of-pickups-all-running-through-Red-Special-wiring-all-into-the-one-output-jack #so-yeah.-either-really-good-or-really-bad. -
Photo of the Day 12th June 2026.
https://madcam.co.uk/2026/06/12/photo-of-the-day-12th-june-2026/
-
Photo of the Day 12th June 2026.
https://madcam.co.uk/2026/06/12/photo-of-the-day-12th-june-2026/
-
Photo of the Day 11th June 2026.
https://madcam.co.uk/2026/06/11/photo-of-the-day-11th-june-2026/
-
Photo of the Day 11th June 2026.
https://madcam.co.uk/2026/06/11/photo-of-the-day-11th-june-2026/
-
Photo of the Day 10th June 2026.
https://madcam.co.uk/2026/06/10/photo-of-the-day-10th-june-2026/
