#3d-printed — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #3d-printed, aggregated by home.social.
-
RE: https://mastodon.social/@arstechnica/116948936327774957
#Skyroot’s rocket stands about 22 meters tall, with the capability to place payloads of up to 350 kilograms into low-Earth orbit. This makes #Vikram1 somewhat larger than the #Electron launch vehicle developed by #RocketLab.
Skyroot's ambition involves larger liquid-fueled fully reusable ♻️ rockets, with a “daily cadence” from multiple countries
-
RE: https://mastodon.social/@arstechnica/116948936327774957
#Skyroot’s rocket stands about 22 meters tall, with the capability to place payloads of up to 350 kilograms into low-Earth orbit. This makes #Vikram1 somewhat larger than the #Electron launch vehicle developed by #RocketLab.
Skyroot's ambition involves larger liquid-fueled fully reusable ♻️ rockets, with a “daily cadence” from multiple countries
-
RE: https://mastodon.social/@arstechnica/116948936327774957
#Skyroot’s rocket stands about 22 meters tall, with the capability to place payloads of up to 350 kilograms into low-Earth orbit. This makes #Vikram1 somewhat larger than the #Electron launch vehicle developed by #RocketLab.
Skyroot's ambition involves larger liquid-fueled fully reusable ♻️ rockets, with a “daily cadence” from multiple countries
-
RE: https://mastodon.social/@arstechnica/116948936327774957
#Skyroot’s rocket stands about 22 meters tall, with the capability to place payloads of up to 350 kilograms into low-Earth orbit. This makes #Vikram1 somewhat larger than the #Electron launch vehicle developed by #RocketLab.
Skyroot's ambition involves larger liquid-fueled fully reusable ♻️ rockets, with a “daily cadence” from multiple countries
-
RE: https://mastodon.social/@arstechnica/116948936327774957
#Skyroot’s rocket stands about 22 meters tall, with the capability to place payloads of up to 350 kilograms into low-Earth orbit. This makes #Vikram1 somewhat larger than the #Electron launch vehicle developed by #RocketLab.
Skyroot's ambition involves larger liquid-fueled fully reusable ♻️ rockets, with a “daily cadence” from multiple countries
-
Not Friday anymore, but my #FreeCADFriday was about getting some #QualityOfLife things together.
Got my rotating hanging bar up again after a small redesign of the bearing holders. Also designed and #3DPrinted an end stop for my nieces' hang bar since they're worried that it'll fall out of the bearing.
Haven't had my #PineTime on my arm for a few days since the strap broke. Printed a small loop in ASA and cut the zip flap off a discarded rain jacket to make myself a new one.
-
Not Friday anymore, but my #FreeCADFriday was about getting some #QualityOfLife things together.
Got my rotating hanging bar up again after a small redesign of the bearing holders. Also designed and #3DPrinted an end stop for my nieces' hang bar since they're worried that it'll fall out of the bearing.
Haven't had my #PineTime on my arm for a few days since the strap broke. Printed a small loop in ASA and cut the zip flap off a discarded rain jacket to make myself a new one.
-
Not Friday anymore, but my #FreeCADFriday was about getting some #QualityOfLife things together.
Got my rotating hanging bar up again after a small redesign of the bearing holders. Also designed and #3DPrinted an end stop for my nieces' hang bar since they're worried that it'll fall out of the bearing.
Haven't had my #PineTime on my arm for a few days since the strap broke. Printed a small loop in ASA and cut the zip flap off a discarded rain jacket to make myself a new one.
-
Not Friday anymore, but my #FreeCADFriday was about getting some #QualityOfLife things together.
Got my rotating hanging bar up again after a small redesign of the bearing holders. Also designed and #3DPrinted an end stop for my nieces' hang bar since they're worried that it'll fall out of the bearing.
Haven't had my #PineTime on my arm for a few days since the strap broke. Printed a small loop in ASA and cut the zip flap off a discarded rain jacket to make myself a new one.
-
while the acoustic #violin 🎻 works
it wasn't #family friendly with us only having a small house.so #3DPrinted violin mk2 in a dual black and purple silk filament
(yea I know there's a string missing, it snapped and I'm too tired to replace it right now at 23:38) -
while the acoustic #violin 🎻 works
it wasn't #family friendly with us only having a small house.so #3DPrinted violin mk2 in a dual black and purple silk filament
(yea I know there's a string missing, it snapped and I'm too tired to replace it right now at 23:38) -
while the acoustic #violin 🎻 works
it wasn't #family friendly with us only having a small house.so #3DPrinted violin mk2 in a dual black and purple silk filament
(yea I know there's a string missing, it snapped and I'm too tired to replace it right now at 23:38) -
while the acoustic #violin 🎻 works
it wasn't #family friendly with us only having a small house.so #3DPrinted violin mk2 in a dual black and purple silk filament
(yea I know there's a string missing, it snapped and I'm too tired to replace it right now at 23:38) -
while the acoustic #violin 🎻 works
it wasn't #family friendly with us only having a small house.so #3DPrinted violin mk2 in a dual black and purple silk filament
(yea I know there's a string missing, it snapped and I'm too tired to replace it right now at 23:38) -
3D Printed Scooter Fits in Your Luggage, Some Assembly Required
-
3D Printed Scooter Fits in Your Luggage, Some Assembly Required
-
3D Printed Scooter Fits in Your Luggage, Some Assembly Required
-
TTArtisan’s $89 AF 50mm f/1.8 Lens Has Crazy Customization Options https://petapixel.com/2026/07/07/ttartisans-89-af-50mm-f-1-8-lens-has-crazy-customization-options/ #customization #niftyfifty #Equipment #3dprinted #3dprinter #primelens #ttartisan #50mmf18 #emount #lmount #zmount #News #lens
-
TTArtisan’s $89 AF 50mm f/1.8 Lens Has Crazy Customization Options https://petapixel.com/2026/07/07/ttartisans-89-af-50mm-f-1-8-lens-has-crazy-customization-options/ #customization #niftyfifty #Equipment #3dprinted #3dprinter #primelens #ttartisan #50mmf18 #emount #lmount #zmount #News #lens
-
TTArtisan’s $89 AF 50mm f/1.8 Lens Has Crazy Customization Options https://petapixel.com/2026/07/07/ttartisans-89-af-50mm-f-1-8-lens-has-crazy-customization-options/ #customization #niftyfifty #Equipment #3dprinted #3dprinter #primelens #ttartisan #50mmf18 #emount #lmount #zmount #News #lens
-
TTArtisan’s $89 AF 50mm f/1.8 Lens Has Crazy Customization Options https://petapixel.com/2026/07/07/ttartisans-89-af-50mm-f-1-8-lens-has-crazy-customization-options/ #customization #niftyfifty #Equipment #3dprinted #3dprinter #primelens #ttartisan #50mmf18 #emount #lmount #zmount #News #lens
-
TTArtisan’s $89 AF 50mm f/1.8 Lens Has Crazy Customization Options https://petapixel.com/2026/07/07/ttartisans-89-af-50mm-f-1-8-lens-has-crazy-customization-options/ #customization #niftyfifty #Equipment #3dprinted #3dprinter #primelens #ttartisan #50mmf18 #emount #lmount #zmount #News #lens
-
2026 Frikkin Lasers Challenge: A 3D-Printed Raman Spectrometer
-
2026 Frikkin Lasers Challenge: A 3D-Printed Raman Spectrometer
-
2026 Frikkin Lasers Challenge: A 3D-Printed Raman Spectrometer
-
2026 Frikkin Lasers Challenge: A 3D-Printed Raman Spectrometer
-
2026 Frikkin Lasers Challenge: A 3D-Printed Raman Spectrometer
-
Make a DIY E-ink Faceplate For Valve’s Steam Machine
-
Make a DIY E-ink Faceplate For Valve’s Steam Machine
-
Make a DIY E-ink Faceplate For Valve’s Steam Machine
-
Make a DIY E-ink Faceplate For Valve’s Steam Machine
-
Make a DIY E-ink Faceplate For Valve’s Steam Machine
-
OK all my #electronics / #PCB fab #FediFrens 👋 I need [1] to get a custom #keypad designed & fabbed and I’m starting from a low low base of “sure I’ve put built plenty of electronics kits & learned a bit of electronics theory but mostly a long time ago & I haven’t designed anything myself”… 🙃
so what’s the best way to get started? 🤔
I found a couple of places that do custom #keyboards & have online key[board|pad] design tools, which seems about right. I don’t actually want to become an expert in custom PCB / #keyboard design, PCB fabbing, or managing Shenzhen supply chains – I just want to get this one thing made [2] and am happy [3] to exchange money for goods & services (within reason) to get it done
I’ve already looked at just using a gaming keypad to do the thing but I really want to integrate the keypad into the other thing to get it to where I want it to be…
OK, there’s no need to be coy I guess – I want to put a “real” keypad into my 1:1 #3Dprinted #Apollo #DSKY (WIP pic below)what’s my optimal pathway to getting this to exist? I imagine that other DSKY nerds may want one once it exists, so the ability to turn it into a limited run after the initial prototypes are done would be a bonus
pls #boost4reach 🙏
(tagging in @projectgus, @voltagex, & @Unixbigot for starters…)#AGC
[1] want
[2] yeah, I hear it too 🤪
[3] resigned -
OK all my #electronics / #PCB fab #FediFrens 👋 I need [1] to get a custom #keypad designed & fabbed and I’m starting from a low low base of “sure I’ve put built plenty of electronics kits & learned a bit of electronics theory but mostly a long time ago & I haven’t designed anything myself”… 🙃
so what’s the best way to get started? 🤔
I found a couple of places that do custom #keyboards & have online key[board|pad] design tools, which seems about right. I don’t actually want to become an expert in custom PCB / #keyboard design, PCB fabbing, or managing Shenzhen supply chains – I just want to get this one thing made [2] and am happy [3] to exchange money for goods & services (within reason) to get it done
I’ve already looked at just using a gaming keypad to do the thing but I really want to integrate the keypad into the other thing to get it to where I want it to be…
OK, there’s no need to be coy I guess – I want to put a “real” keypad into my 1:1 #3Dprinted #Apollo #DSKY (WIP pic below)what’s my optimal pathway to getting this to exist? I imagine that other DSKY nerds may want one once it exists, so the ability to turn it into a limited run after the initial prototypes are done would be a bonus
pls #boost4reach 🙏
(tagging in @projectgus, @voltagex, & @Unixbigot for starters…)#AGC
[1] want
[2] yeah, I hear it too 🤪
[3] resigned -
OK all my #electronics / #PCB fab #FediFrens 👋 I need [1] to get a custom #keypad designed & fabbed and I’m starting from a low low base of “sure I’ve put built plenty of electronics kits & learned a bit of electronics theory but mostly a long time ago & I haven’t designed anything myself”… 🙃
so what’s the best way to get started? 🤔
I found a couple of places that do custom #keyboards & have online key[board|pad] design tools, which seems about right. I don’t actually want to become an expert in custom PCB / #keyboard design, PCB fabbing, or managing Shenzhen supply chains – I just want to get this one thing made [2] and am happy [3] to exchange money for goods & services (within reason) to get it done
I’ve already looked at just using a gaming keypad to do the thing but I really want to integrate the keypad into the other thing to get it to where I want it to be…
OK, there’s no need to be coy I guess – I want to put a “real” keypad into my 1:1 #3Dprinted #Apollo #DSKY (WIP pic below)what’s my optimal pathway to getting this to exist? I imagine that other DSKY nerds may want one once it exists, so the ability to turn it into a limited run after the initial prototypes are done would be a bonus
pls #boost4reach 🙏
(tagging in @projectgus, @voltagex, & @Unixbigot for starters…)#AGC
[1] want
[2] yeah, I hear it too 🤪
[3] resigned -
OK all my #electronics / #PCB fab #FediFrens 👋 I need [1] to get a custom #keypad designed & fabbed and I’m starting from a low low base of “sure I’ve put built plenty of electronics kits & learned a bit of electronics theory but mostly a long time ago & I haven’t designed anything myself”… 🙃
so what’s the best way to get started? 🤔
I found a couple of places that do custom #keyboards & have online key[board|pad] design tools, which seems about right. I don’t actually want to become an expert in custom PCB / #keyboard design, PCB fabbing, or managing Shenzhen supply chains – I just want to get this one thing made [2] and am happy [3] to exchange money for goods & services (within reason) to get it done
I’ve already looked at just using a gaming keypad to do the thing but I really want to integrate the keypad into the other thing to get it to where I want it to be…
OK, there’s no need to be coy I guess – I want to put a “real” keypad into my 1:1 #3Dprinted #Apollo #DSKY (WIP pic below)what’s my optimal pathway to getting this to exist? I imagine that other DSKY nerds may want one once it exists, so the ability to turn it into a limited run after the initial prototypes are done would be a bonus
pls #boost4reach 🙏
(tagging in @projectgus, @voltagex, & @Unixbigot for starters…)#AGC
[1] want
[2] yeah, I hear it too 🤪
[3] resigned -
OK all my #electronics / #PCB fab #FediFrens 👋 I need [1] to get a custom #keypad designed & fabbed and I’m starting from a low low base of “sure I’ve put built plenty of electronics kits & learned a bit of electronics theory but mostly a long time ago & I haven’t designed anything myself”… 🙃
so what’s the best way to get started? 🤔
I found a couple of places that do custom #keyboards & have online key[board|pad] design tools, which seems about right. I don’t actually want to become an expert in custom PCB / #keyboard design, PCB fabbing, or managing Shenzhen supply chains – I just want to get this one thing made [2] and am happy [3] to exchange money for goods & services (within reason) to get it done
I’ve already looked at just using a gaming keypad to do the thing but I really want to integrate the keypad into the other thing to get it to where I want it to be…
OK, there’s no need to be coy I guess – I want to put a “real” keypad into my 1:1 #3Dprinted #Apollo #DSKY (WIP pic below)what’s my optimal pathway to getting this to exist? I imagine that other DSKY nerds may want one once it exists, so the ability to turn it into a limited run after the initial prototypes are done would be a bonus
pls #boost4reach 🙏
(tagging in @projectgus, @voltagex, & @Unixbigot for starters…)#AGC
[1] want
[2] yeah, I hear it too 🤪
[3] resigned -
Piano Escapement Migrates to Drum Kit
https://fed.brid.gy/r/https://hackaday.com/2026/06/29/piano-escapement-migrates-to-drum-kit/
-
Piano Escapement Migrates to Drum Kit
https://fed.brid.gy/r/https://hackaday.com/2026/06/29/piano-escapement-migrates-to-drum-kit/
-
Piano Escapement Migrates to Drum Kit
https://web.brid.gy/r/https://hackaday.com/2026/06/29/piano-escapement-migrates-to-drum-kit/
-
Piano Escapement Migrates to Drum Kit
https://web.brid.gy/r/https://hackaday.com/2026/06/29/piano-escapement-migrates-to-drum-kit/
-
Piano Escapement Migrates to Drum Kit
https://web.brid.gy/r/https://hackaday.com/2026/06/29/piano-escapement-migrates-to-drum-kit/
-
This is a bag hook I designed and #3Dprinted. I only really print useful things. The #design is available on my website. I’ve made it robust enough to be printed in #PLA and I’ve used it for enough hours with heavy enough loads (laptop etc) to say it’s stable, rugged, and if you add a furniture pad into the recess, won’t scratch any surfaces. Freely available: https://piconet.work/printing
-
This is a bag hook I designed and #3Dprinted. I only really print useful things. The #design is available on my website. I’ve made it robust enough to be printed in #PLA and I’ve used it for enough hours with heavy enough loads (laptop etc) to say it’s stable, rugged, and if you add a furniture pad into the recess, won’t scratch any surfaces. Freely available: https://piconet.work/printing
-
Just got my first pair of #3dprinted shoes! #3dprinting #pollyfab
-
Just got my first pair of #3dprinted shoes! #3dprinting #pollyfab
-
Just got my first pair of #3dprinted shoes! #3dprinting #pollyfab
-
Just got my first pair of #3dprinted shoes! #3dprinting #pollyfab
-
I #3DPrinted a #violin like you do) and the layer lines were stupidly bad and my fix just made them worse
So I worked with the fail and applied "cell shader" style to it.
I can't play the violin 🤣 but seems like time to learn.
-
I #3DPrinted a #violin like you do) and the layer lines were stupidly bad and my fix just made them worse
So I worked with the fail and applied "cell shader" style to it.
I can't play the violin 🤣 but seems like time to learn.
-
I #3DPrinted a #violin like you do) and the layer lines were stupidly bad and my fix just made them worse
So I worked with the fail and applied "cell shader" style to it.
I can't play the violin 🤣 but seems like time to learn.
-
Finished my #macramé #dreamcatcher
I used a #3dprinted ring so I had to cover it completely with cord, which brought on a few challenges with hiding string ends. I also cut a few of the cords a bit too short so I had to get a little creative with the finishing knots.
The design is based on this YouTube video - https://youtu.be/tsx2F6vkH8g
-
Finished my #macramé #dreamcatcher
I used a #3dprinted ring so I had to cover it completely with cord, which brought on a few challenges with hiding string ends. I also cut a few of the cords a bit too short so I had to get a little creative with the finishing knots.
The design is based on this YouTube video - https://youtu.be/tsx2F6vkH8g
-
Finished my #macramé #dreamcatcher
I used a #3dprinted ring so I had to cover it completely with cord, which brought on a few challenges with hiding string ends. I also cut a few of the cords a bit too short so I had to get a little creative with the finishing knots.
The design is based on this YouTube video - https://youtu.be/tsx2F6vkH8g
-
Finished my #macramé #dreamcatcher
I used a #3dprinted ring so I had to cover it completely with cord, which brought on a few challenges with hiding string ends. I also cut a few of the cords a bit too short so I had to get a little creative with the finishing knots.
The design is based on this YouTube video - https://youtu.be/tsx2F6vkH8g
-
Ergonomic Mouse Gives Each Fingertip Its Own Saddle
-
Ergonomic Mouse Gives Each Fingertip Its Own Saddle
