#3dprinted — Public Fediverse posts

9:55 PM and all's glowy.

I cheated here and charged up the digits with a high intensity flashlight. They glow a little just from the charge they get from the ceiling light -- enough to read the clock, but barely.

#3DPrinted #clock

@biggeordiegeek Same here - I use this little #3DPrinted holder for tight spaces

https://www.tinkercad.com/things/52jDqa93DCE-screwdriver-14in-bit-holder

#3DPrinting

Current workbench project for some late stage Savage Tides encounters. Only one day of #3dPrinted to go for the hind tentacles. Then on to putty to fill gaps and correct any printer failure. #miniatures

4) I also ordered a range of different Peltier plates to continue developing the chiller for the #CloudChamber
5) Now I am free of deadlines for projects for the year, I can get on with building my #BoxTurtle filament changer
6) I really ought to finish building my #3dprinted RC off road robot chassis from earlier in the year (needed a higher torque motor which didn't fit the chassis I built for #HackyRacer robotic series).
7) Parts ordered for a better 5V 5A mobile power board design for Pi5

We Are Living in a Panoramic Film Renaissance

In just an eight-month period, no …
#NewsBeep #News #US #USA #UnitedStates #UnitedStatesOfAmerica #Artsanddesign #120camera #120film #120format #3dprinted #analog #analogcamera #Arts #ArtsAndDesign #customcamerabuilding #Design #Entertainment #Film #filmcamera #Kickstarter #largeformat #mediumformat #mediumformatcamera #mediumformatfilm #panoramic #panoramiccamera #panoramicfilmcamera #review #sasquatch617 #vz6617
https://www.newsbeep.com/us/801588/

We Are Living in a Panoramic Film Renaissance

In just an eight-month period, no fewer than three new medium format…
#NewsBeep #News #Artsanddesign #120camera #120film #120format #3dprinted #analog #analogcamera #Arts #ArtsAndDesign #CA #Canada #customcamerabuilding #Design #Entertainment #Film #filmcamera #kickstarter #largeformat #mediumformat #mediumformatcamera #mediumformatfilm #panoramic #panoramiccamera #panoramicfilmcamera #review #sasquatch617 #vz6617
https://www.newsbeep.com/ca/844621/

We Are Living in a Panoramic Film Renaissance

In just an eight-month period, no fewer than three new medium for…
#NewsBeep #News #Artsanddesign #120camera #120film #120format #3dprinted #analog #analogcamera #Arts #ArtsAndDesign #AU #Australia #customcamerabuilding #Design #Entertainment #film #filmcamera #kickstarter #largeformat #mediumformat #mediumformatcamera #mediumformatfilm #panoramic #panoramiccamera #panoramicfilmcamera #review #sasquatch617 #vz6617
https://www.newsbeep.com/au/842077/

We Are Living in a Panoramic Film Renaissance https://petapixel.com/2026/08/03/we-are-living-in-a-panoramic-film-renaissance/ #customcamerabuilding #panoramicfilmcamera #mediumformatcamera #mediumformatfilm #panoramiccamera #analogcamera #mediumformat #sasquatch617 #kickstarter #largeformat #filmcamera #Equipment #120camera #120format #3dprinted #panoramic #Reviews #120film #Analog #analog #review #vz6617 #film

I made last month's PrintKits project, a moon lamp. It has a COB LED strip and a bas-relief lunar surface. I made the surround metallic red with iridescent blue-green bolts just because.

The gap between the sections is really ugly in daylight, but when lit up, they disappear, thank goodness.

#PrintKits #3DPrinted

RE: https://mastodon.social/@arstechnica/116948936327774957

#Skyroot’s rocket stands about 22 meters tall, with the capability to place payloads of up to 350 kilograms into low-Earth orbit. This makes #Vikram1 somewhat larger than the #Electron launch vehicle developed by #RocketLab.

Skyroot's ambition involves larger liquid-fueled fully reusable ♻️ rockets, with a “daily cadence” from multiple countries

#3Dprinted #RocketEngine

Not Friday anymore, but my #FreeCADFriday was about getting some #QualityOfLife things together.

Got my rotating hanging bar up again after a small redesign of the bearing holders. Also designed and #3DPrinted an end stop for my nieces' hang bar since they're worried that it'll fall out of the bearing.

Haven't had my #PineTime on my arm for a few days since the strap broke. Printed a small loop in ASA and cut the zip flap off a discarded rain jacket to make myself a new one.

#FreeCAD #DIY

3D printed yo-yos for #WorldEmojiDay

https://spectra.video/w/bveFzC63ie2mUSxhV4vGj9

while the acoustic #violin 🎻 works
it wasn't #family friendly with us only having a small house.

so #3DPrinted violin mk2 in a dual black and purple silk filament
(yea I know there's a string missing, it snapped and I'm too tired to replace it right now at 23:38)

https://www.thingiverse.com/thing:781491

#music #ElVioin

3D Printed Scooter Fits in Your Luggage, Some Assembly Required

https://fed.brid.gy/r/https://hackaday.com/2026/07/10/3d-printed-scooter-fits-in-your-luggage-some-assembly-required/

TTArtisan’s $89 AF 50mm f/1.8 Lens Has Crazy Customization Options https://petapixel.com/2026/07/07/ttartisans-89-af-50mm-f-1-8-lens-has-crazy-customization-options/ #customization #niftyfifty #Equipment #3dprinted #3dprinter #primelens #ttartisan #50mmf18 #emount #lmount #zmount #News #lens

2026 Frikkin Lasers Challenge: A 3D-Printed Raman Spectrometer

https://fed.brid.gy/r/https://hackaday.com/2026/07/05/2026-frikkin-lasers-challenge-a-3d-printed-raman-spectrometer/

Make a DIY E-ink Faceplate For Valve’s Steam Machine

https://fed.brid.gy/r/https://hackaday.com/2026/07/04/make-a-diy-e-ink-faceplate-for-valves-steam-machine/

OK all my #electronics / #PCB fab #FediFrens 👋 I need [1] to get a custom #keypad designed & fabbed and I’m starting from a low low base of “sure I’ve put built plenty of electronics kits & learned a bit of electronics theory but mostly a long time ago & I haven’t designed anything myself”… 🙃

so what’s the best way to get started? 🤔

I found a couple of places that do custom #keyboards & have online key[board|pad] design tools, which seems about right. I don’t actually want to become an expert in custom PCB / #keyboard design, PCB fabbing, or managing Shenzhen supply chains – I just want to get this one thing made [2] and am happy [3] to exchange money for goods & services (within reason) to get it done

I’ve already looked at just using a gaming keypad to do the thing but I really want to integrate the keypad into the other thing to get it to where I want it to be…
 
 
OK, there’s no need to be coy I guess – I want to put a “real” keypad into my 1:1 #3Dprinted #Apollo #DSKY (WIP pic below)

what’s my optimal pathway to getting this to exist? I imagine that other DSKY nerds may want one once it exists, so the ability to turn it into a limited run after the initial prototypes are done would be a bonus

pls #boost4reach 🙏
 
 
(tagging in @projectgus, @voltagex, & @Unixbigot for starters…)

#AGC
 
 
 
[1] want
[2] yeah, I hear it too 🤪
[3] resigned

Piano Escapement Migrates to Drum Kit

https://fed.brid.gy/r/https://hackaday.com/2026/06/29/piano-escapement-migrates-to-drum-kit/

I #3DPrinted a #violin like you do) and the layer lines were stupidly bad and my fix just made them worse

So I worked with the fail and applied "cell shader" style to it.

I can't play the violin 🤣 but seems like time to learn.

https://www.hovalabs.com/work/hovalin

Finished my #macramé #dreamcatcher

I used a #3dprinted ring so I had to cover it completely with cord, which brought on a few challenges with hiding string ends. I also cut a few of the cords a bit too short so I had to get a little creative with the finishing knots.

The design is based on this YouTube video - https://youtu.be/tsx2F6vkH8g