#esun — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #esun, aggregated by home.social.
-
Really liking some #eSUN #ASA+ that I'm currently printing with for outside garden use. Printing at 270C nozzle and 110C for the bed on my #ElegooCentauriCarbon
Sticks to the bed quite nicely .Needs brims for narrow stuff but the brims come away very cleanly when the part is cool. (I use a can of freezer spray if I need my prints cooling quickly)
-
Really liking some #eSUN #ASA+ that I'm currently printing with for outside garden use. Printing at 270C nozzle and 110C for the bed on my #ElegooCentauriCarbon
Sticks to the bed quite nicely .Needs brims for narrow stuff but the brims come away very cleanly when the part is cool. (I use a can of freezer spray if I need my prints cooling quickly)
-
Really liking some #eSUN #ASA+ that I'm currently printing with for outside garden use. Printing at 270C nozzle and 110C for the bed on my #ElegooCentauriCarbon
Sticks to the bed quite nicely .Needs brims for narrow stuff but the brims come away very cleanly when the part is cool. (I use a can of freezer spray if I need my prints cooling quickly)
-
Really liking some #eSUN #ASA+ that I'm currently printing with for outside garden use. Printing at 270C nozzle and 110C for the bed on my #ElegooCentauriCarbon
Sticks to the bed quite nicely .Needs brims for narrow stuff but the brims come away very cleanly when the part is cool. (I use a can of freezer spray if I need my prints cooling quickly)
-
Really liking some #eSUN #ASA+ that I'm currently printing with for outside garden use. Printing at 270C nozzle and 110C for the bed on my #ElegooCentauriCarbon
Sticks to the bed quite nicely .Needs brims for narrow stuff but the brims come away very cleanly when the part is cool. (I use a can of freezer spray if I need my prints cooling quickly)
-
Put #eSUN #PETG basic/lite Filament in a Box and instantly watch it suck up all humidity inside the box.
That stuff is not usable as filament.
It pops like popcorn, resisted all professional attempts at drying and still want's more.
It can probably be used as silica-gel replacement.
Don't buy.
The graph shows the temperature-compensated absolute humidity in an unheated room-temperature box. As soon as I put the spool inside, humidity dropped while room humidity remained stable.
-
Put #eSUN #PETG basic/lite Filament in a Box and instantly watch it suck up all humidity inside the box.
That stuff is not usable as filament.
It pops like popcorn, resisted all professional attempts at drying and still want's more.
It can probably be used as silica-gel replacement.
Don't buy.
The graph shows the temperature-compensated absolute humidity in an unheated room-temperature box. As soon as I put the spool inside, humidity dropped while room humidity remained stable.
-
Put #eSUN #PETG basic/lite Filament in a Box and instantly watch it suck up all humidity inside the box.
That stuff is not usable as filament.
It pops like popcorn, resisted all professional attempts at drying and still want's more.
It can probably be used as silica-gel replacement.
Don't buy.
The graph shows the temperature-compensated absolute humidity in an unheated room-temperature box. As soon as I put the spool inside, humidity dropped while room humidity remained stable.
-
Put #eSUN #PETG basic/lite Filament in a Box and instantly watch it suck up all humidity inside the box.
That stuff is not usable as filament.
It pops like popcorn, resisted all professional attempts at drying and still want's more.
It can probably be used as silica-gel replacement.
Don't buy.
The graph shows the temperature-compensated absolute humidity in an unheated room-temperature box. As soon as I put the spool inside, humidity dropped while room humidity remained stable.
-
Put #eSUN #PETG basic/lite Filament in a Box and instantly watch it suck up all humidity inside the box.
That stuff is not usable as filament.
It pops like popcorn, resisted all professional attempts at drying and still want's more.
It can probably be used as silica-gel replacement.
Don't buy.
The graph shows the temperature-compensated absolute humidity in an unheated room-temperature box. As soon as I put the spool inside, humidity dropped while room humidity remained stable.
-
稍微記錄下這次被盜刷的過程:
9/30 醒來發現玉山發了 4 封簡訊，說半夜信用卡被刷了 3 筆 (以敘述來看應該是海外刷卡)，但均已被擋掉，同一時間玉山 App 並沒有相關刷卡通知，所以也無從得知是哪張卡被盜刷; 等到中午午休後，終於有時間聯絡客服，客服給了卡號末 4 碼，並問我說最近有沒有在 FB/IG 下廣告 (印象中常在盜刷文看到)，回答沒有後，便回覆卡片已停卡並會再寄發新卡
玉山 Wallet APP 可以個別設定每張卡的刷卡權限，被盜刷的 UBear 油熊卡一直以來都被我拿來訂 Netflix 和每月定期定額贊助，所以一直都有打開海外線上刷卡的權限，那看來這次這幾筆都是因為觸發銀行風控被擋下的 (卡號被算到?)，算是不幸中的大幸，為了保險起見，我又一併設定每筆刷卡金額上限了，但要重新設定每筆扣款也實在煩人 (很多捐款網站都得手動寄 mail 取消，然後再重新設定... ORZ)
-
稍微記錄下這次被盜刷的過程:
9/30 醒來發現玉山發了 4 封簡訊，說半夜信用卡被刷了 3 筆 (以敘述來看應該是海外刷卡)，但均已被擋掉，同一時間玉山 App 並沒有相關刷卡通知，所以也無從得知是哪張卡被盜刷; 等到中午午休後，終於有時間聯絡客服，客服給了卡號末 4 碼，並問我說最近有沒有在 FB/IG 下廣告 (印象中常在盜刷文看到)，回答沒有後，便回覆卡片已停卡並會再寄發新卡
玉山 Wallet APP 可以個別設定每張卡的刷卡權限，被盜刷的 UBear 油熊卡一直以來都被我拿來訂 Netflix 和每月定期定額贊助，所以一直都有打開海外線上刷卡的權限，那看來這次這幾筆都是因為觸發銀行風控被擋下的 (卡號被算到?)，算是不幸中的大幸，為了保險起見，我又一併設定每筆刷卡金額上限了，但要重新設定每筆扣款也實在煩人 (很多捐款網站都得手動寄 mail 取消，然後再重新設定... ORZ)
-
稍微記錄下這次被盜刷的過程:
9/30 醒來發現玉山發了 4 封簡訊，說半夜信用卡被刷了 3 筆 (以敘述來看應該是海外刷卡)，但均已被擋掉，同一時間玉山 App 並沒有相關刷卡通知，所以也無從得知是哪張卡被盜刷; 等到中午午休後，終於有時間聯絡客服，客服給了卡號末 4 碼，並問我說最近有沒有在 FB/IG 下廣告 (印象中常在盜刷文看到)，回答沒有後，便回覆卡片已停卡並會再寄發新卡
玉山 Wallet APP 可以個別設定每張卡的刷卡權限，被盜刷的 UBear 油熊卡一直以來都被我拿來訂 Netflix 和每月定期定額贊助，所以一直都有打開海外線上刷卡的權限，那看來這次這幾筆都是因為觸發銀行風控被擋下的 (卡號被算到?)，算是不幸中的大幸，為了保險起見，我又一併設定每筆刷卡金額上限了，但要重新設定每筆扣款也實在煩人 (很多捐款網站都得手動寄 mail 取消，然後再重新設定... ORZ)
-
Ich bin echt etwas sauer. Ich habe in dieser einen Sommeraktion das eSun PLA+ gekauft und seit die Hälfte der Rolle durch ist, bricht das Filament ab und zu während des Drucks.
Da dieses eSun (noch) mit Plastik-Rolle kommt und die neueren mit Papprolle, war das wohl ziemlich altes Zeugs?
-
Ich bin echt etwas sauer. Ich habe in dieser einen Sommeraktion das eSun PLA+ gekauft und seit die Hälfte der Rolle durch ist, bricht das Filament ab und zu während des Drucks.
Da dieses eSun (noch) mit Plastik-Rolle kommt und die neueren mit Papprolle, war das wohl ziemlich altes Zeugs?
-
Ich bin echt etwas sauer. Ich habe in dieser einen Sommeraktion das eSun PLA+ gekauft und seit die Hälfte der Rolle durch ist, bricht das Filament ab und zu während des Drucks.
Da dieses eSun (noch) mit Plastik-Rolle kommt und die neueren mit Papprolle, war das wohl ziemlich altes Zeugs?
-
Ich bin echt etwas sauer. Ich habe in dieser einen Sommeraktion das eSun PLA+ gekauft und seit die Hälfte der Rolle durch ist, bricht das Filament ab und zu während des Drucks.
Da dieses eSun (noch) mit Plastik-Rolle kommt und die neueren mit Papprolle, war das wohl ziemlich altes Zeugs?
-
Ich bin echt etwas sauer. Ich habe in dieser einen Sommeraktion das eSun PLA+ gekauft und seit die Hälfte der Rolle durch ist, bricht das Filament ab und zu während des Drucks.
Da dieses eSun (noch) mit Plastik-Rolle kommt und die neueren mit Papprolle, war das wohl ziemlich altes Zeugs?
-
Heattower sagt, temperaturtypisches Stringing fängt bei dem eSun PLA+ bei 195 °C an. Bin ich darüber, kein Stringing.
Damit war das gestrige Stringing definitiv ein Problem mit der Düse, die kaputt war. Denn ich drucke das PLA mit 210 °C.
-
Heattower sagt, temperaturtypisches Stringing fängt bei dem eSun PLA+ bei 195 °C an. Bin ich darüber, kein Stringing.
Damit war das gestrige Stringing definitiv ein Problem mit der Düse, die kaputt war. Denn ich drucke das PLA mit 210 °C.
-
Heattower sagt, temperaturtypisches Stringing fängt bei dem eSun PLA+ bei 195 °C an. Bin ich darüber, kein Stringing.
Damit war das gestrige Stringing definitiv ein Problem mit der Düse, die kaputt war. Denn ich drucke das PLA mit 210 °C.
-
Heattower sagt, temperaturtypisches Stringing fängt bei dem eSun PLA+ bei 195 °C an. Bin ich darüber, kein Stringing.
Damit war das gestrige Stringing definitiv ein Problem mit der Düse, die kaputt war. Denn ich drucke das PLA mit 210 °C.
-
Heattower sagt, temperaturtypisches Stringing fängt bei dem eSun PLA+ bei 195 °C an. Bin ich darüber, kein Stringing.
Damit war das gestrige Stringing definitiv ein Problem mit der Düse, die kaputt war. Denn ich drucke das PLA mit 210 °C.
-
So, anyone know how #PLA+ (particularly #eSUN which I usually buy) stacks up environmentally ? I love the extra toughness and easier printing, especially as it's barely more expensive (it may actually work out cheaper due to fewer reprints).
But not knowing exactly what the + is (no standard) - I wonder what the trade off is? #PLA is very recyclable and in the right conditions #biodegradable and doesn't require any fossil fuels to make. It makes #3dprinting greener. Is PLA+ significantly worse?
-
So, anyone know how #PLA+ (particularly #eSUN which I usually buy) stacks up environmentally ? I love the extra toughness and easier printing, especially as it's barely more expensive (it may actually work out cheaper due to fewer reprints).
But not knowing exactly what the + is (no standard) - I wonder what the trade off is? #PLA is very recyclable and in the right conditions #biodegradable and doesn't require any fossil fuels to make. It makes #3dprinting greener. Is PLA+ significantly worse?
-
So, anyone know how #PLA+ (particularly #eSUN which I usually buy) stacks up environmentally ? I love the extra toughness and easier printing, especially as it's barely more expensive (it may actually work out cheaper due to fewer reprints).
But not knowing exactly what the + is (no standard) - I wonder what the trade off is? #PLA is very recyclable and in the right conditions #biodegradable and doesn't require any fossil fuels to make. It makes #3dprinting greener. Is PLA+ significantly worse?
-
So, anyone know how #PLA+ (particularly #eSUN which I usually buy) stacks up environmentally ? I love the extra toughness and easier printing, especially as it's barely more expensive (it may actually work out cheaper due to fewer reprints).
But not knowing exactly what the + is (no standard) - I wonder what the trade off is? #PLA is very recyclable and in the right conditions #biodegradable and doesn't require any fossil fuels to make. It makes #3dprinting greener. Is PLA+ significantly worse?
-
My first filament change. I had to update the print settings of my Creality Ender 2 Pro because this PLA+ from eSun preferred higher nozzle and bed temperatures than my previous prints.
This came out as probably my smoothest print so far. What is it? It's Just Another Monitor Headphone Hanger (https://www.thingiverse.com/thing:2673731)
-
My first filament change. I had to update the print settings of my Creality Ender 2 Pro because this PLA+ from eSun preferred higher nozzle and bed temperatures than my previous prints.
This came out as probably my smoothest print so far. What is it? It's Just Another Monitor Headphone Hanger (https://www.thingiverse.com/thing:2673731)
-
My first filament change. I had to update the print settings of my Creality Ender 2 Pro because this PLA+ from eSun preferred higher nozzle and bed temperatures than my previous prints.
This came out as probably my smoothest print so far. What is it? It's Just Another Monitor Headphone Hanger (https://www.thingiverse.com/thing:2673731)
-
My first filament change. I had to update the print settings of my Creality Ender 2 Pro because this PLA+ from eSun preferred higher nozzle and bed temperatures than my previous prints.
This came out as probably my smoothest print so far. What is it? It's Just Another Monitor Headphone Hanger (https://www.thingiverse.com/thing:2673731)
-
Finally remembering/getting around to using this kit I bought to vacuum seal my opened filament. Works well, and the bags are reusable.
-
Finally remembering/getting around to using this kit I bought to vacuum seal my opened filament. Works well, and the bags are reusable.
-
Finally remembering/getting around to using this kit I bought to vacuum seal my opened filament. Works well, and the bags are reusable.
-
Finally remembering/getting around to using this kit I bought to vacuum seal my opened filament. Works well, and the bags are reusable.
-
Finally remembering/getting around to using this kit I bought to vacuum seal my opened filament. Works well, and the bags are reusable.
-
#3dprinting I'm curious what filament people recommend. I personally use #esun #pla+ but, feel free to share your thoughts on esun pla+ or your recommendation since I'm currently in the market for another spool now.
