home.social

#centauricarbon — Public Fediverse posts

Live and recent posts from across the Fediverse tagged #centauricarbon, aggregated by home.social.

  1. Jon A. Cruz @[email protected] ·

    Ooh, look! I fixed a thing!

    Remixed the flexible #filament #adapter for #CentauriCarbon 1 with #CANVAS and #CentauriCarbon2

    printables.com/model/1720439-m

    #CC1 #CC2 #Elegoo

    #filament #adapter #centauricarbon #canvas #centauricarbon2 #cc1
  2. Jon A. Cruz @[email protected] ·

    Ooh, look! I fixed a thing!

    Remixed the flexible #filament #adapter for #CentauriCarbon 1 with #CANVAS and #CentauriCarbon2

    printables.com/model/1720439-m

    #CC1 #CC2 #Elegoo

    #filament #adapter #centauricarbon #canvas #centauricarbon2 #cc1
  3. minnix @[email protected] ·

    Prototype mount in PLA for a chamber heater for the Centauri Carbon built in OnShape. M4 bolts with hidden nuts and inserts for ND magnets to attach the mount without drilling. This will wire to a thermostatic socket to turn it off and on. Next I'll print the real one in ASA and wire everything up and say goodbye to warps and shrinks when printing with engineering materials. #3dprinting #centauricarbon

    #3dprinting #centauricarbon
  4. minnix @[email protected] ·

    Prototype mount in PLA for a chamber heater for the Centauri Carbon built in OnShape. M4 bolts with hidden nuts and inserts for ND magnets to attach the mount without drilling. This will wire to a thermostatic socket to turn it off and on. Next I'll print the real one in ASA and wire everything up and say goodbye to warps and shrinks when printing with engineering materials. #3dprinting #centauricarbon

    #3dprinting #centauricarbon
  5. Simon Walters @cymplecy ·

    Really liking some + that I'm currently printing with for outside garden use. Printing at 270C nozzle and 110C for the bed on my

    Sticks to the bed quite nicely .Needs brims for narrow stuff but the brims come away very cleanly when the part is cool. (I use a can of freezer spray if I need my prints cooling quickly)

    #esun #asa #elegoocentauricarbon #3dprinting #centauricarbon
  6. Simon Walters @[email protected] ·

    Really liking some #eSUN #ASA+ that I'm currently printing with for outside garden use. Printing at 270C nozzle and 110C for the bed on my #ElegooCentauriCarbon

    Sticks to the bed quite nicely .Needs brims for narrow stuff but the brims come away very cleanly when the part is cool. (I use a can of freezer spray if I need my prints cooling quickly)

    #3DPrinting #CentauriCarbon

    #esun #asa #elegoocentauricarbon #3dprinting #centauricarbon
  7. Simon Walters @cymplecy ·

    I've had an idea

    discourse.nodered.org/t/flow-n

    with a webcam reachable via LAN IP

    #3dprinting #centauricarbon #oranyprinter
  8. Simon Walters @[email protected] ·

    I've had an idea

    discourse.nodered.org/t/flow-n
    #3DPrinting #CentauriCarbon

    #OrAnyPrinter with a webcam reachable via LAN IP

    #3dprinting #centauricarbon #oranyprinter
  9. Simon Walters @cymplecy ·

    I've made a cover to protect my new PEI bed for my as I realised that my plate was just about big enough to print one.

    So should keep it safe from when I do stupid things like putting my coffee cup down on it :)
    // @mythlfrythtyg @kianryan @biglesp

    #neptune3pro #centauricarbon #3dprinting
  10. Simon Walters @[email protected] ·

    I've made a cover to protect my new PEI bed for my #Neptune3Pro as I realised that my #CentauriCarbon plate was just about big enough to print one.

    So should keep it safe from when I do stupid things like putting my coffee cup down on it :)
    // @mythlfrythtyg @kianryan @biglesp
    #3DPrinting

    #neptune3pro #centauricarbon #3dprinting
  11. Simon Walters @cymplecy ·

    Looks likely that there won't be a multi-colour upgrade for the
    elegoo.com/en-gb/blogs/news/up

    #centauricarbon #3dprinting
  12. Simon Walters @[email protected] ·

    Looks likely that there won't be a multi-colour upgrade for the #CentauriCarbon
    elegoo.com/en-gb/blogs/news/up

    #3DPrinting

    #centauricarbon #3dprinting
  13. Simon Walters @cymplecy ·

    Completed this hinge lid conversion for my
    makerworld.com/en/models/16835



    Most printed using white PLA+ with the springs and sidearms printed using

    #centauricarbon #3dprinting #elegoo #asa
  14. Simon Walters @[email protected] ·

    Completed this hinge lid conversion for my #CentauriCarbon
    makerworld.com/en/models/16835

    #3DPrinting

    Most printed using white #Elegoo PLA+ with the springs and sidearms printed using #ASA

    #centauricarbon #3dprinting #elegoo #asa
  15. Simon Walters @cymplecy ·

    Here was the clog

    #3dprinting #centauricarbon
  16. Simon Walters @[email protected] ·

    Here was the clog

    #3DPrinting #CentauriCarbon

    #3dprinting #centauricarbon
  17. Simon Walters @cymplecy ·

    Just had another issue with my during a filament change but I solved the clog my following this excellent and clear cut video
    youtube.com/watch?v=4rtYA11c_aA

    #centauricarbon #3dprinting
  18. Simon Walters @[email protected] ·

    Just had another issue with my #CentauriCarbon during a filament change but I solved the clog my following this excellent and clear cut video
    youtube.com/watch?v=4rtYA11c_aA

    #3DPrinting

    #centauricarbon #3dprinting
  19. Simon Walters @cymplecy ·

    Took me 4 attempts to print this off using on my

    I've ended up increasing bed temp to 100C, lowering Z-height by 0.2mm and using 15mm brim

    Its part of this project to customise how the lid works
    makerworld.com/en/models/16835

    #asa #centauricarbon #3dprinting
  20. Simon Walters @[email protected] ·

    Took me 4 attempts to print this off using #ASA on my #CentauriCarbon

    I've ended up increasing bed temp to 100C, lowering Z-height by 0.2mm and using 15mm brim

    #3DPrinting

    Its part of this project to customise how the lid works
    makerworld.com/en/models/16835

    #asa #centauricarbon #3dprinting
  21. Simon Walters @cymplecy ·

    I sourced some magnets and foam tape
    amazon.co.uk/dp/B0CNGZVCZP?ref

    amazon.co.uk/dp/B09NGQVM4V?ref

    and this is a recording of difference it makes (muffler on - muffler off - muffler on again)

    It helps keep the noise down a bit


    // @dotslash

    #3dprinting #centauricarbon
  22. Simon Walters @[email protected] ·

    I sourced some magnets and foam tape
    amazon.co.uk/dp/B0CNGZVCZP?ref

    amazon.co.uk/dp/B09NGQVM4V?ref

    and this is a recording of difference it makes (muffler on - muffler off - muffler on again)

    It helps keep the noise down a bit

    #3DPrinting #CentauriCarbon
    // @dotslash

    #3dprinting #centauricarbon
  23. Simon Walters @cymplecy ·

    Has anyone made the fan muffler for their and where did you get your magnets from?

    buymeacoffee.com/cc3dprojects/

    #centauricarbon #3dprinting
  24. Simon Walters @[email protected] ·

    Has anyone made the fan muffler for their #CentauriCarbon and where did you get your magnets from?

    buymeacoffee.com/cc3dprojects/

    #3DPrinting

    #centauricarbon #3dprinting
  25. Dan the 3D Printing Dad @3DPrintingDad ·

    Looking for a solution for tools for your Elegoo ? Check out this mod that allows you to mix and match tool holders.

    It's , so you can make it work for you.

    Get it here!
    printables.com/model/1410087-c

    #3dprinting #centauricarbon #opensource
  26. Dan the 3D Printing Dad @[email protected] ·

    Looking for a #3dprinting solution for tools for your Elegoo #CentauriCarbon? Check out this mod that allows you to mix and match tool holders.

    It's #opensource, so you can make it work for you.

    Get it here!
    printables.com/model/1410087-c

    #3dprinting #centauricarbon #opensource
  27. Simon Walters @cymplecy ·

    @biglesp FYI I just tried running some TPU through my and it slid up the PFTE tube no problem and printed fine :)

    #centauricarbon #3dprinting
  28. Simon Walters @[email protected] ·

    @biglesp FYI I just tried running some TPU through my #CentauriCarbon and it slid up the PFTE tube no problem and printed fine :)

    #3DPrinting

    #centauricarbon #3dprinting
  29. Rui Carmo @[email protected] ·

    I just had one of those #3dprinting "15 minutes of printing that took me 2 hours of disassembling the hotend to unclog it in the stove" moments. I suspect it's time to look at an #elegoo #centauricarbon or a #snapmaker #u1.

    #3dprinting #elegoo #centauricarbon #snapmaker #u1
  30. Rui Carmo @[email protected] ·

    I just had one of those #3dprinting "15 minutes of printing that took me 2 hours of disassembling the hotend to unclog it in the stove" moments. I suspect it's time to look at an #elegoo #centauricarbon or a #snapmaker #u1.

    #3dprinting #elegoo #centauricarbon #snapmaker #u1
  31. Simon Walters @cymplecy ·

    It seems it's not just me that has webcam issues on my youtu.be/yV87YP_PSh4?t=832

    #elegoo #centauricarbon #3dprinting
  32. Simon Walters @[email protected] ·

    It seems it's not just me that has webcam issues on my #Elegoo #CentauriCarbon youtu.be/yV87YP_PSh4?t=832

    #3DPrinting

    #elegoo #centauricarbon #3dprinting
  33. Simon Walters @cymplecy ·

    "Houston - we have a problem..." :( Forgot to take previous print off bed before printing an other object and things have got broken off :(
    Going out this afternoon so will have to see if I can fix it tomorrow

    #3dprinting #centauricarbon
  34. Simon Walters @[email protected] ·

    "Houston - we have a problem..." :( Forgot to take previous print off bed before printing an other object and things have got broken off :(
    Going out this afternoon so will have to see if I can fix it tomorrow
    #3DPrinting #CentauriCarbon

    #3dprinting #centauricarbon
  35. Simon Walters @cymplecy ·

    I'm using the on for my but it's very flaky in connecting to the webcam. Webcam works reliably if I open a browser window on the printer IP address. Anyone else seeing this issue?

    #orcaslicer #linux #mint #elegoo #centauricarbon #3dprinting
  36. Simon Walters @[email protected] ·

    I'm using the #OrcaSlicer on #Linux #Mint for my #Elegoo #CentauriCarbon but it's very flaky in connecting to the webcam. Webcam works reliably if I open a browser window on the printer IP address. Anyone else seeing this issue?

    #3DPrinting

    #orcaslicer #linux #mint #elegoo #centauricarbon #3dprinting
  37. Simon Walters @cymplecy ·

    Buying some filament to try out for a garden item with my

    #asa #elegoo #centauricarbon #3dprinting
  38. Simon Walters @[email protected] ·

    Buying some #ASA filament to try out for a garden item with my #Elegoo #CentauriCarbon
    #3DPrinting

    #asa #elegoo #centauricarbon #3dprinting
  39. Simon Walters @cymplecy ·

    Found out I can monitor print progress and webcam using an old phone web browser just set to the http LAN ip address

    #elegoo #centauricarbon #3dprinting
  40. Simon Walters @[email protected] ·

    Found out I can monitor print progress and webcam using an old phone web browser just set to the http LAN ip address #Elegoo #CentauriCarbon #3DPrinting

    #elegoo #centauricarbon #3dprinting
  41. Simon Walters @cymplecy ·

    I've solved the noise problem of my by moving the printer into my bedroom - I can barely hear it now :-)

    Monitoring progress via it's webcam :)

    #elegoo #centauricarbon #3dprinting
  42. Simon Walters @[email protected] ·

    I've solved the noise problem of my #Elegoo #CentauriCarbon by moving the printer into my bedroom - I can barely hear it now :-)

    Monitoring progress via it's webcam :)

    #3DPrinting

    #elegoo #centauricarbon #3dprinting
  43. James Hubbard @[email protected] ·

    #Elegoo #centauricarbon printer arrived last weekend. Ordered some PETG that is something other than black. Youngest picked out a couple of toys. Oldest found some useful gadgets for music and a fidget device. Not a bad setup for $300. Goal: Get at least one of the kids interested in building their own models.

    #elegoo #centauricarbon
  44. James Hubbard @[email protected] ·

    #Elegoo #centauricarbon printer arrived last weekend. Ordered some PETG that is something other than black. Youngest picked out a couple of toys. Oldest found some useful gadgets for music and a fidget device. Not a bad setup for $300. Goal: Get at least one of the kids interested in building their own models.

    #elegoo #centauricarbon
  45. Jon A. Cruz @[email protected] ·

    OK, I have my #Elegoo #CentauriCarbon settled in and working nicely now. Time to step things up a notch and have it and my #Neptune4Plus going at the same time. Just gotta be sure to get them plugged into different outlets.

    #3DPrinting

    #elegoo #centauricarbon #neptune4plus #3dprinting
  46. Jon A. Cruz @[email protected] ·

    OK, I have my #Elegoo #CentauriCarbon settled in and working nicely now. Time to step things up a notch and have it and my #Neptune4Plus going at the same time. Just gotta be sure to get them plugged into different outlets.

    #3DPrinting

    #elegoo #centauricarbon #neptune4plus #3dprinting
  47. Dan the 3D Printing Dad @3DPrintingDad ·

    I'm curious: is there anyone in the first batch of pre-orders that can tell me if their printer arrived on time, early, or late? (See linked chart for reference.) I'm in the second batch. 🙂
    us.elegoo.com/blogs/news/shipp

    #centauricarbon
  48. Dan the 3D Printing Dad @[email protected] ·

    I'm curious: is there anyone in the first batch of #CentauriCarbon pre-orders that can tell me if their printer arrived on time, early, or late? (See linked chart for reference.) I'm in the second batch. 🙂
    us.elegoo.com/blogs/news/shipp

    #centauricarbon