#loraaprs — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #loraaprs, aggregated by home.social.
-
Taking my #Spaceagon out for a walk using #BleepieAPRS by @sammachin #LoRaAPRS #APRS
-
Taking my #Spaceagon out for a walk using #BleepieAPRS by @sammachin #LoRaAPRS #APRS
-
Wo bei meinem T114 jetzt das Display "Schrott" ist, das Gehäuse hat wohl die Tage bei der Hitze sich verformt und zu viel Druck ausgeübt, brauche ich was neues im Auto. Ich schwanke momentan zwischen einem Heltec Wireless Tracker und einem Lilygo T-Beam Supreme uBlox. Welcher taugt mehr für Anwendung im Auto, gibt es bei Bestellung irgendwelche Sachen beim Zoll jetzt zu beachten?
-
I'm back in Bellevue, WA after a 60 hour Amtrak ride DEN -> SCA -> SEA
I left an LoRa APRS iGate and Meshtastic node in Lakewood, CO No worries about the WA4OSH-20 SSID, it's on APRS-IS network.
-
I'm back in Bellevue, WA after a 60 hour Amtrak ride DEN -> SCA -> SEA
I left an LoRa APRS iGate and Meshtastic node in Lakewood, CO No worries about the WA4OSH-20 SSID, it's on APRS-IS network.
-
@Aegewsh
100% AX.25 Packet radio was invented in 1978's after I got my HAM license 50 years ago.It was a point-to point network with digipeaters in the middle. The first TNCs were designed by #TAPR in 1983.
Bob Bruninga took AX.25 packet and confined it to mostly a weather station and GPS tracker protocol (on the left).
#LoRaAPRS was the initial work of Peter Buchegger OE5BPA, Bernd Gasser OE1ACM, Christoph Gasser OE1CGC and Christian Johan Bauer OE3CJB. That's the vision on the right.
-
@Aegewsh
100% AX.25 Packet radio was invented in 1978's after I got my HAM license 50 years ago.It was a point-to point network with digipeaters in the middle. The first TNCs were designed by #TAPR in 1983.
Bob Bruninga took AX.25 packet and confined it to mostly a weather station and GPS tracker protocol (on the left).
#LoRaAPRS was the initial work of Peter Buchegger OE5BPA, Bernd Gasser OE1ACM, Christoph Gasser OE1CGC and Christian Johan Bauer OE3CJB. That's the vision on the right.
-
@rocking_horse #Reticulum seems to be non-ham radio protocol. It's purpose is to send traffic over all sorts of different PHY layers. It's distributed and encrypted. There are more #preppers than there are HAMs
#LoRaWAN is an unlicensed IT protocol maintained by the LoRa Alliance. Not #HAM radio
#LoRaAPRS originated in Austria. I helped translate German documentation into English and Spanish to bring it to ITU region 2. It's more wide-spread in Spanish speaking countries than the US.
-
@rocking_horse #Reticulum seems to be non-ham radio protocol. It's purpose is to send traffic over all sorts of different PHY layers. It's distributed and encrypted. There are more #preppers than there are HAMs
#LoRaWAN is an unlicensed IT protocol maintained by the LoRa Alliance. Not #HAM radio
#LoRaAPRS originated in Austria. I helped translate German documentation into English and Spanish to bring it to ITU region 2. It's more wide-spread in Spanish speaking countries than the US.
-
I fully agree with you that the AX.25 / APRS (Bob Bruninga's implentation of AS.25) standard only supports SSIDs numbered 0-15. It's a radio protocol.
However, an iGate is an internet device. It never hears the tracker's RF transmission. It's not the destination of packets.
On APRS.fi / internet side: Anything goes — higher SSIDs (or even letters) are fully supported and displayed because it's all text over the 'net, not constrained by the ancient 4-bit field.
-
My #LoRaAPRS nodes are CA2RXU based. It would be useful to also be able to message to and from, monitor as well as admin those nodes as well.
Is the limit of SSID 0 (or none) to 15 overly restrictive? My LoRaAPRS igate is on SSID 20. I receive traffic from other nearby SSID's here in the front range of Colorado also out of the 0-15 SSID range. Eg. WD4IXD-40
Go to APRS.fi and search for WA4OSH* then look at the info page.
-
Surprisingly (at least for me) #Reticulum is more known than #LoRaWAN and #LoRaAPRS not much less
-
Surprisingly (at least for me) #Reticulum is more known than #LoRaWAN and #LoRaAPRS not much less
-
Found out the hard way today that those #lilygo devices like T-Beam have wifi, but not on 5GHz
Good news is that 1 station received my beacons from work qth ground floor, small aerial for #70cm that came with the device.
Wonder what freq on 2 and 23 and 13 cm we can use for #lora and #loraaprs
Today for the first time my igate got on to the general aprs.fi map!
-
Found out the hard way today that those #lilygo devices like T-Beam have wifi, but not on 5GHz
Good news is that 1 station received my beacons from work qth ground floor, small aerial for #70cm that came with the device.
Wonder what freq on 2 and 23 and 13 cm we can use for #lora and #loraaprs
Today for the first time my igate got on to the general aprs.fi map!
-
@F4EGX_Nico oh is there an #loraaprs frequency on ism 868 for #aprs like 433775 on 70cm?
de on1aad
-
@F4EGX_Nico oh is there an #loraaprs frequency on ism 868 for #aprs like 433775 on 70cm?
de on1aad
-
-
-
-
-
-
-
Falls sich jemand mit SH1106 mit der passenden Adafruit Library auskennt, kann gerne auf dem Makerspace auf der Ham vorbeischauen.
Derjenige bekommt von mir selbstverständlich ein Kaltgetränk spendiert!
-
Im Makerspace auf der HAM findet zwischen durch auch ein eigenes Projekt mal Platz. 😄
-
-
-
New #antenna arrived for the #LoRaAPRS setup. While better then the results before, This still doesn't work well.
I placed the receiver in the front window, but still had the transmit side in side the car - this is probably the problem. #LoRa is very low powered after all.
My car may also be noisy in the 433mhz band.
But I made some progress with the setup, now just to make better progress LOL.
On a plus note, the device displays messages nicely, so once working better - that will be nice -
New #antenna arrived for the #LoRaAPRS setup. While better then the results before, This still doesn't work well.
I placed the receiver in the front window, but still had the transmit side in side the car - this is probably the problem. #LoRa is very low powered after all.
My car may also be noisy in the 433mhz band.
But I made some progress with the setup, now just to make better progress LOL.
On a plus note, the device displays messages nicely, so once working better - that will be nice -
Going to have to do a lot more testing, so this seems to work sitting on the desk, but doesn't work when I'm out.
But I had problems with LoRa 433 around here before. So today I tried a couple of different antenna, still not working.
SO I think all I can do is get an external antenna for both of these devices and see what happens.Maybe I need an amplifier?
-
Going to have to do a lot more testing, so this seems to work sitting on the desk, but doesn't work when I'm out.
But I had problems with LoRa 433 around here before. So today I tried a couple of different antenna, still not working.
SO I think all I can do is get an external antenna for both of these devices and see what happens.Maybe I need an amplifier?
-
#LoRaAPRS first weatherproof enclosure completed!! Very little modification required. Those M2 nylon standoffs work great.
-
#LoRaAPRS first weatherproof enclosure completed!! Very little modification required. Those M2 nylon standoffs work great.
-
Bon flashage et tes de mon #tracker #loraaprs av c le dode de @richonguzman tous semble fonctionner... #radioamateur #hamradio #lora
