#bedslinger — Public Fediverse posts

Any chooms got some 3D printing advice?

I have a bedslinger (Sovol SV06 ACE, PLA), and any lower profile prints have been perfect, but I wanted to try this cool paper-holding rat to print for my son, and I have tried 3 times and it comes loose from the bed near the top of the print. Of course then it just air prints.

Things I have tried:

• Cleaning the bed with 96% ethanol (I do that before each print anyway)
• Using hairspray on the bed
• Increasing the first layer thickness
• Adjusting the z-offset for more squish
• Adding a skirt of 8mm
• Checking all the temp settings: bed 60C, first layer 210C print temp 200C (as specified on the PLA spool)

I'm using orcaslicer, I think the one thing that's left to try is reducing the print speed, but I hoped that wouldn't be needed...Maybe there is a way to slow the print as you get further up? Or maybe because I'm such a n00b I missed something obvbious

#3dprint #3dprinting #orcaslicer #slicer #bedslinger #AdvicePlease #AdviceNeeded #hardware

Any chooms got some 3D printing advice?

I have a bedslinger (Sovol SV06 ACE, PLA), and any lower profile prints have been perfect, but I wanted to try this cool paper-holding rat to print for my son, and I have tried 3 times and it comes loose from the bed near the top of the print. Of course then it just air prints.

Things I have tried:

• Cleaning the bed with 96% ethanol (I do that before each print anyway)
• Using hairspray on the bed
• Increasing the first layer thickness
• Adjusting the z-offset for more squish
• Adding a skirt of 8mm
• Checking all the temp settings: bed 60C, first layer 210C print temp 200C (as specified on the PLA spool)

I'm using orcaslicer, I think the one thing that's left to try is reducing the print speed, but I hoped that wouldn't be needed...Maybe there is a way to slow the print as you get further up? Or maybe because I'm such a n00b I missed something obvbious

#3dprint #3dprinting #orcaslicer #slicer #bedslinger #AdvicePlease #AdviceNeeded #hardware

Any chooms got some 3D printing advice?

I have a bedslinger (Sovol SV06 ACE, PLA), and any lower profile prints have been perfect, but I wanted to try this cool paper-holding rat to print for my son, and I have tried 3 times and it comes loose from the bed near the top of the print. Of course then it just air prints.

Things I have tried:

• Cleaning the bed with 96% ethanol (I do that before each print anyway)
• Using hairspray on the bed
• Increasing the first layer thickness
• Adjusting the z-offset for more squish
• Adding a skirt of 8mm
• Checking all the temp settings: bed 60C, first layer 210C print temp 200C (as specified on the PLA spool)

I'm using orcaslicer, I think the one thing that's left to try is reducing the print speed, but I hoped that wouldn't be needed...Maybe there is a way to slow the print as you get further up? Or maybe because I'm such a n00b I missed something obvbious

#3dprint #3dprinting #orcaslicer #slicer #bedslinger #AdvicePlease #AdviceNeeded #hardware

Any chooms got some 3D printing advice?

I have a bedslinger (Sovol SV06 ACE, PLA), and any lower profile prints have been perfect, but I wanted to try this cool paper-holding rat to print for my son, and I have tried 3 times and it comes loose from the bed near the top of the print. Of course then it just air prints.

Things I have tried:

• Cleaning the bed with 96% ethanol (I do that before each print anyway)
• Using hairspray on the bed
• Increasing the first layer thickness
• Adjusting the z-offset for more squish
• Adding a skirt of 8mm
• Checking all the temp settings: bed 60C, first layer 210C print temp 200C (as specified on the PLA spool)

I'm using orcaslicer, I think the one thing that's left to try is reducing the print speed, but I hoped that wouldn't be needed...Maybe there is a way to slow the print as you get further up? Or maybe because I'm such a n00b I missed something obvbious

#3dprint #3dprinting #orcaslicer #slicer #bedslinger #AdvicePlease #AdviceNeeded #hardware

Any chooms got some 3D printing advice?

I have a bedslinger (Sovol SV06 ACE, PLA), and any lower profile prints have been perfect, but I wanted to try this cool paper-holding rat to print for my son, and I have tried 3 times and it comes loose from the bed near the top of the print. Of course then it just air prints.

Things I have tried:

• Cleaning the bed with 96% ethanol (I do that before each print anyway)
• Using hairspray on the bed
• Increasing the first layer thickness
• Adjusting the z-offset for more squish
• Adding a skirt of 8mm
• Checking all the temp settings: bed 60C, first layer 210C print temp 200C (as specified on the PLA spool)

I'm using orcaslicer, I think the one thing that's left to try is reducing the print speed, but I hoped that wouldn't be needed...Maybe there is a way to slow the print as you get further up? Or maybe because I'm such a n00b I missed something obvbious

#3dprint #3dprinting #orcaslicer #slicer #bedslinger #AdvicePlease #AdviceNeeded #hardware

Apparently, my #prusa needed a thermal goop replacement after almost 4 years to fix the "thermal anomaly" issue...

#3dprinting #print3d #bedslinger #tech

Apparently, my #prusa needed a thermal goop replacement after almost 4 years to fix the "thermal anomaly" issue...

#3dprinting #print3d #bedslinger #tech

Apparently, my #prusa needed a thermal goop replacement after almost 4 years to fix the "thermal anomaly" issue...

#3dprinting #print3d #bedslinger #tech

Apparently, my #prusa needed a thermal goop replacement after almost 4 years to fix the "thermal anomaly" issue...

#3dprinting #print3d #bedslinger #tech

Apparently, my #prusa needed a thermal goop replacement after almost 4 years to fix the "thermal anomaly" issue...

#3dprinting #print3d #bedslinger #tech

Bambu Lab A1 mini

This thing is impressive–it’s about the size and print volume of my KP3S Pro but is only around 50% more expensive if you buy the printer alone or EUR 500 with the AMS, which seems like pretty good value for money and is only slightly above the price of a Prusa Mini on its own.(...)

#a1 #cantilever #multicolor #bedslinger #bambulab #ams #3dprinting

https://taoofmac.com/space/links/2023/09/20/2233

Bambu Lab A1 mini

This thing is impressive–it’s about the size and print volume of my KP3S Pro but is only around 50% more expensive if you buy the printer alone or EUR 500 with the AMS, which seems like pretty good value for money and is only slightly above the price of a Prusa Mini on its own.(...)

#a1 #cantilever #multicolor #bedslinger #bambulab #ams #3dprinting

https://taoofmac.com/space/links/2023/09/20/2233

Bambu Lab A1 mini

This thing is impressive–it’s about the size and print volume of my KP3S Pro but is only around 50% more expensive if you buy the printer alone or EUR 500 with the AMS, which seems like pretty good value for money and is only slightly above the price of a Prusa Mini on its own.(...)

#a1 #cantilever #multicolor #bedslinger #bambulab #ams #3dprinting

https://taoofmac.com/space/links/2023/09/20/2233

Bambu Lab A1 mini

This thing is impressive–it’s about the size and print volume of my KP3S Pro but is only around 50% more expensive if you buy the printer alone or EUR 500 with the AMS, which seems like pretty good value for money and is only slightly above the price of a Prusa Mini on its own.(...)

#a1 #cantilever #multicolor #bedslinger #bambulab #ams #3dprinting

https://taoofmac.com/space/links/2023/09/20/2233

Bambu Lab A1 mini

This thing is impressive–it’s about the size and print volume of my KP3S Pro but is only around 50% more expensive if you buy the printer alone or EUR 500 with the AMS, which seems like pretty good value for money and is only slightly above the price of a Prusa Mini on its own.(...)

#a1 #cantilever #multicolor #bedslinger #bambulab #ams #3dprinting

https://taoofmac.com/space/links/2023/09/20/2233