#bambulab — Public Fediverse posts

So AMS slot 1 doesn't want to load (or feed) filament when the spool is too light. It just keeps locking up the roller intermittently. I don't have this problem with any of the other slots, AFAIK.

Hopefully it's a simple fix of just adding weight to the spool.

#BambuLab #3DPrinting

So AMS slot 1 doesn't want to load (or feed) filament when the spool is too light. It just keeps locking up the roller intermittently. I don't have this problem with any of the other slots, AFAIK.

Hopefully it's a simple fix of just adding weight to the spool.

#BambuLab #3DPrinting

So AMS slot 1 doesn't want to load (or feed) filament when the spool is too light. It just keeps locking up the roller intermittently. I don't have this problem with any of the other slots, AFAIK.

Hopefully it's a simple fix of just adding weight to the spool.

#BambuLab #3DPrinting

So AMS slot 1 doesn't want to load (or feed) filament when the spool is too light. It just keeps locking up the roller intermittently. I don't have this problem with any of the other slots, AFAIK.

Hopefully it's a simple fix of just adding weight to the spool.

#BambuLab #3DPrinting

Habe mal wieder was gedruckt 🙄
In den Behälter passt eine Dose Energy-Drink. Das passt einfach super zu einem #Pedelec
#3d #3dprinting #BambuLab #MakerWorld #Fahrradalltag

Bambu Lab A2L – Vybalení, Nastavení a první TISK… stojí za to? (CZ)

https://vhsky.cz/w/drRSFaYwxFw1YZoqxQeeG3

I've not been in the 3-D printing space in a while, but I think this is worth sharing for anyone that is: https://www.jeffgeerling.com/blog/2026/bambu-lab-abusing-open-source-social-contract/

Please boost for reach.

#3DPrinting #Bambu #BambuLab #OrcaSlicer #BambuStudio #PrusaSlicer #slic3r

Bambu Lab X2D - Vybalení, Nastavení a první TISK... stojí za to?

https://vhsky.cz/w/pDXpUiJA9mjXFUGqTEjZ5K

Today, the 3D printer decided to make me smadonnare (swear). #3dprint #3dprinting #bambulab #x1c #bambulabx1c

Ich #verkaufe ein #BambuLab #X1C Komplett-Set (mit #AMS, jede Menge Zubehoer sowie diverse Filament-Rollen).

https://www.willhaben.at/iad/kaufen-und-verkaufen/d/bambu-lab-x1c-mit-ams-riesen-menge-an-zubehoer-1449450032/

Well, my last test prints with the material combination of #PETG and #BVOH (for the support interfaces) turned out very well, after proper drying of both filaments and printing with a single nozzle #BambuLab #X1C. It took quite a bit of fine-tuning in the settings, but now it seems to be working. I am now printing one of the two complicated models in its entirety, the monitor stand for the #NeXT #MegaPixel display.

#3DPrint #3DPrinting #RetroComputer #VintageComputer #NeXTComputer

This is what my printer sounds like (sometimes it's even worse). At the end of the video, you can hear it "stuttering."

#BambuLab #X1C

My #BambuLab #X1C makes weird noises when traveling x-axis. Could it be the print head is somewhat "lose" or maybe the carbon rods are worn out? 🤔

#BambuLab #X1C
Schon fast 3 h und etwa 200 Gramm gedruckt und nun beim Filamentwechsel für das Support-Interface geht nix mehr. 🤬

Das AMS schiebt das Filament vor und zurück und vor und zurück, solange bis es auf der Spule klemmt. Löse ich das, geht es wieder los mit vor und zurück usw., solange bis es wieder klemmt. 🙄

Versuche den PTFE-Schlauch während dem Vorschieben beim Extruder zu lösen zeigen, das Filament kommt dort an - wird aber offenbar nicht erkannt.
Verdacht: Problem mit dem Hall-Sensor beim Extruder. *Fck*

#3DDruck #3DDrucker

#3DDrucker #LessonsLearned

Der #BambuLab #X1C erkennt bei Benutzung der "externen Spule" (also nicht über das AMS) offenbar nicht, wenn das Material aus ist - für euch getestet mit einem (deshalb fehlgeschlagenem) 7h Druck. 🙄

Die Meldung am Display suggerierte eine erfolgreiche Beendigung des Druckes, das Teil am Druckbett war jedoch bei etwa 3/4 abgeschnitten. Da wurde das letzte Viertel nur noch Luft gedruckt. 🤦‍♂️

#3DDruck #3DPrinting

I'm wondering if anyone has already tested #3Dprinting with #TPU 63D in an #AMS on a #BambuLab #X1C #3Dprinter?
#BambuLab recommends a minimum of #TPU 68D, but I don't think there's much difference between 63D and 68D.
Thank you for your feedback and advice.

Endlich auch mal ein Gehäuse für das Heltek V3 Modul gedruckt, in das der 3000 mAh Akku passt! 😊 #Meshtastic #3dprinting #HeltecV3 #lora #BambuLab 👉 https://makerworld.com/en/models/1069537-meshtastic-case-heltec-v3-w-3000mah-battery

And suddenly I get this strange error message on my #BambuLab #X1C. Everything went well until just now... 🤔

Qui invece troverete il modello 3D della testa di Sir Daniel di #medievil https://makerworld.com/models/1341739

#free3d #3dprinting #sirdaniel #bambulab

Oh man, over three thousand hours of printing time leaves its marks on a printer like this. Even if it is a #BambuLab #X1C. What I urgently need to do:

1. Cleaning! Cleaning VERY thoroughly.
2. tighten the belts and adjust the pullies. Possibly even replace belts.
3. Replace the housing fan. The original one seems to have bearing damage and makes a hell of a noise!
3. Clean or replace the extruder.

#3DPrint #3DPrinting

Ein neuer #Lampenschirm für die #Lampe über dem Esstisch. Der alte von Ikea war nun wirklich mal in die Jahre gekommen.

Ganz einfach aus weißem PLA gedruckt, was natürlich impliziert, dass ihr da keine 100 W Glühbirnen reinschraubt, sondern ne #E27 #Energiesparlampe
Gute Haftung und ein korrekt eingestellter Drucker sind notwendig bei der dünnen Konstruktion.

https://makerworld.com/de/models/883846-water-lily-lamp-shade-100-3d-printable#profileId-838520

#BambuLab #3D #3Dprinting #UsefulThings #BambuLabX1C #X1C

This is a real perfect first layer (on my Bambu Lab X1C, except the right back corner. Here you can see a... wavy surface structure, and I don't know what the reason could be.

Do you have any ideas?

#3DPrint #3DPrinting #BambuLab #X1C #FirstLayer

The design process for my Raspberry Pi ono case is complete. It consists of 15 3D printed parts. Do you think it's overengineered? 🤓

As always, watch the live rendering here:

https://collaborate.shapr3d.com/v/Rjv4_EsST_PQPrfm8bU7U

#onoCase #3DPrint #3DPrinting #DIY #Maker #MakersHour #RaspberryPi #BambuLab #Shapr3D

With the "4.1-pre" pre-release, the open source slicer Kiri:Moto (which also do CAM and laser) is now capable of controlling your Bambu printer without using any proprietary and closed binaries.

➡️ More info: https://bsky.app/profile/grid.space/post/3lhaixvt7222w

➡️ Pre-release: https://github.com/GridSpace/grid-apps/releases/tag/4.1-pre

➡️ Official website: https://grid.space

#bambu #BambuLab #slicer #kirimoto #opensource

Bummer! It seems that #BigTreeTech is currently working on a replacement board for #BambuLab #X1C printers (running Klipper), to fix that dreadful firmware desaster. 😳

Hi, is anyone here using a #Ratrig #3dPrinter? I recently got an A1 mini to try the Bambu experience in await of their next big release but I’m reconsidering this now for … reasons. So I took a glance at Ratrig as they offer an IDEX upgrade. So my questions: do they work stable, can calibrate automatically and print without further fiddling once build and set up?

#3DPrinterRecommendations #prusa #BambuLab #3DPrinting #3ddruck #voron #sovol #SovolSV08 #qidi #Creality3D

Wow! 3 specific parts of my #NeXT #MegaPixel display take almost 18 hours to print on the #BambuLab #X1C. On a resin printer (Saturn 4 Ultra), #Chitubox tells me it takes 3:43h. And that's with significantly better print quality.

Wow! 😳

#NeXTComputer #RetroComputer #VintageComputer #3DPrint #3DPrinting

This usually takes about 15 minutes on a 0.4 nozzle :nkoSigh: #Benchy #3DPrinting #3DPrinter #BambuLab #X1C

I did not realize using a 0.2 nozzle would increase printing time by so much. I'm running a #Benchy print and it's going to take 2 hours :bear_facepalm: :emo_skull:

#3DPrinting #3DPrinter #BambuLab #X1C

Oh, the first life stream of my #BambuLab #X1C. Do you get a smooth stream?

https://www.youtube.com/live/VXcGjBPaldQ

#3DPrint #3DPrinting #3DPrinter #LifeStream

Is there anyone here who has both a #BambuLab #X1C AND a #P1S?

I have noticed that the housings differ slightly in width and depth, where they should be the same size. Specifically, it concerns the recess at the top where the glass plate is inserted. The internal dimensions of my P1S are about 1.5 mm larger than those of the X1C.

Can anyone confirm this?

Please share, thank you. 🙏🏻
:BoostOK:

#3DPrinting #3DPrinter

Forgot to post this Thanksgiving photo of me having a pleasant time with my family.

#3dprinting #ender3 #x1c #bambulab

After printing some switch caps for the #Imsai-8080 clone, I give the mouse cover a try. The electronic was included as a goodie, the case for self print.
#BambuLab #X1C

Self printing of my "Wireless Mouse Components Kit-002". I'm absolutly impressed by the speed and the precision of my new 3D printer. I bought it on the recommendation of my son, who has been using it in the company for almost a year mostly every single day.
#BambuLab #X1C

For three months now, I've had a #P1S in addition to my #BambuLab #X1C. I've had the Panda Touch Display from #BigTreeTech since January of this year. It's a great device. But now it's time to find its place on the P1S.

For this purpose, I have designed a dock that can be tilted with a hinge, similar to the one on the X1C. I have missed this feature in all the docks and mounts that have been available so far.

#3DPrint #3DPrinting #3DDesign #Shapr3D #3DModeling

https://collaborate.shapr3d.com/v/Bt5bi06Iz9fNgTtbeQrru

I'm just using it for solo projects, but I am continually impressed with #shapr3d on the iPad. It's by far the most intuitive CAD software I've used – the gestures and Apple Pencil functionality is exactly what I expect every time. I can model things so quickly now, it's awesome!

Now if only Bambu Labs would release their slicer software for the iPad, it would be a perfect workflow...

#3dprinting #cad #bambu #bambulab #ipad

Der Multicolor-Druck ist ein bestimmendes Feature von #BambuLab Klar, das man das auch mal im Einsatz haben will.
#BambuLabX1C #3d #3DPrinting #3DFun

https://www.skriptbu.de/2024/08/25/3d-minions-rising/

Maybe it's totally over engineered. However, I really like it. I even designed an SD-Card insertion/removal tool for my #xtouch enclosure. 😃

#3DPrint #3DPrinting #Shapr3D #DIY #BambuLab @3Dprinting

https://collaborate.shapr3d.com/v/KLw5kk-mdmH4hnaSAFuqx

I got a #BambuLabX1C, and I'm happy as a kid on Christmas Day. 🤣
Thank you #Creality #Ender3v2Neo for introducing me to the amazing world of #3DPrinting, but I'll take my next steps with #BambuLab. 👍

It's always gotta be something with 3D Printing. One of the magnetic run out sensors in my Bambu Lab AMS flipped itself and jammed up my filament path. I've had this thing for a week.
I'm frustrated that something I spent this much money on is doing stupid things. But on the other hand I'm happy that there's well made first party documentation for disassembly and repair, so that salves that aggression some.
https://wiki.bambulab.com/en/x1/maintenance/install-the-magnets-in-filaments-hub
#3dprinting #bambulab #BambulabX1C

For my fellow #BambuLab Users

!BE AWARE!

The latest BambuStudio update (1.8.3.89) automatically enabled "Join Customer Experience Improvement Program" without consent. Be sure to check your settings and disable this.

I already opened a GitHub issue regarding this:
https://github.com/bambulab/BambuStudio/issues/3388

#3dprinting #bambulabp1s #bambulabX1C #3dprint

Please share this post to inform more users about this. Thanks!