#adviceneeded — Public Fediverse posts

Hey #makers what material would you use for this project?

I want to make a set of lawn poetry, like magnetic fridge poetry but with non-magnetic and bigger pieces to play on the ground outside with friends.

I want it to be big enough to read off the ground while standing, and light enough to easily bring to picnics. Looking at the magnetic sets, I am guessing I will make 400-500 word tiles (ranging from "a" to e.g., "bedazzled")

#AdvicePlease #AdviceNeeded

Hey #makers what material would you use for this project?

I want to make a set of lawn poetry, like magnetic fridge poetry but with non-magnetic and bigger pieces to play on the ground outside with friends.

I want it to be big enough to read off the ground while standing, and light enough to easily bring to picnics. Looking at the magnetic sets, I am guessing I will make 400-500 word tiles (ranging from "a" to e.g., "bedazzled")

#AdvicePlease #AdviceNeeded

Hey #makers what material would you use for this project?

I want to make a set of lawn poetry, like magnetic fridge poetry but with non-magnetic and bigger pieces to play on the ground outside with friends.

I want it to be big enough to read off the ground while standing, and light enough to easily bring to picnics. Looking at the magnetic sets, I am guessing I will make 400-500 word tiles (ranging from "a" to e.g., "bedazzled")

#AdvicePlease #AdviceNeeded

RE: https://mastodon.social/@sarada9669/116458202414642075

UX/UI designers, anyone has some suggestions of free UX/UI courses/videos on YouTube?

#UX #UI #Design #Advice #AdviceNeeded

Is nerve growth and regenerative medicine a pipedream? I want to do a phalloplasty after my terrible, non-consented, vaginoplasty, ideally in 4-8 years. But since I suffered necrosis on my neoclitoris and the tissue is heavily scared, I don't know what to do.

#Trans #transwoman #transfem #MTf #Medicine #Regenerativemedicine #dysphoria #advice #adviceneeded #nerverepair #experimental #mentalhealth #MedTech #phallo

Is nerve growth and regenerative medicine a pipedream? I want to do a phalloplasty after my terrible, non-consented, vaginoplasty, ideally in 4-8 years. But since I suffered necrosis on my neoclitoris and the tissue is heavily scared, I don't know what to do.

#Trans #transwoman #transfem #MTf #Medicine #Regenerativemedicine #dysphoria #advice #adviceneeded #nerverepair #experimental #mentalhealth #MedTech #phallo

Is nerve growth and regenerative medicine a pipedream? I want to do a phalloplasty after my terrible, non-consented, vaginoplasty, ideally in 4-8 years. But since I suffered necrosis on my neoclitoris and the tissue is heavily scared, I don't know what to do.

#Trans #transwoman #transfem #MTf #Medicine #Regenerativemedicine #dysphoria #advice #adviceneeded #nerverepair #experimental #mentalhealth #MedTech #phallo

Is nerve growth and regenerative medicine a pipedream? I want to do a phalloplasty after my terrible, non-consented, vaginoplasty, ideally in 4-8 years. But since I suffered necrosis on my neoclitoris and the tissue is heavily scared, I don't know what to do.

#Trans #transwoman #transfem #MTf #Medicine #Regenerativemedicine #dysphoria #advice #adviceneeded #nerverepair #experimental #mentalhealth #MedTech #phallo

Is nerve growth and regenerative medicine a pipedream? I want to do a phalloplasty after my terrible, non-consented, vaginoplasty, ideally in 4-8 years. But since I suffered necrosis on my neoclitoris and the tissue is heavily scared, I don't know what to do.

#Trans #transwoman #transfem #MTf #Medicine #Regenerativemedicine #dysphoria #advice #adviceneeded #nerverepair #experimental #mentalhealth #MedTech #phallo

We would love to hear more from #Mastodon and the #Fediverse !
At Ikiya, we love sharing stories about #Japanese culture, from the origins of our teas and crafts to the traditions behind washoku cuisine. We’d love to bring these conversations to life here too, but we need your help!
What would you like us to explore together?
Drop your ideas in the replies or boost this toot to spread the word: every suggestion counts!
#JapaneseCulture #adviceneeded #tealovers

Okay tbf I need some advice.. I have coded in latex but never made a formal documentation/writeup... Any suggestion/advices?

#documentation #latex #AdviceNeeded

You can't have nice things on the internet anymore. I removed the link and user, as this kind of content is against the terms of usage for Coz JP. Tomorrow, I will finish implementing a fully automated process scanning the URLs against public APIs of malicious known conten

Do any of you have experience with user moderation?
Do you have any advice on how to best implement it in this case?
#Phishing #security #moderation #seo #admin #webdevelopment #AdviceNeeded

Dear Fedi friends,

I'm in a bit of a pickle and I could use your brilliant advice.

Long story short, I need to wait an extra 24 hours before attempting to set up Jellyfin on my Raspi (waiting for gear to arrive).

I thought: maybe I could try a low tech / oldie solution first. I have my entire music library super well organized in iTunes (RIP). It's on an old Macbook Pro (2011) connected to an external drive. I can play all the tracks from that computer. I just resurrected my iPhone 6 (capacity: 64GB) to repurpose it as an iPod. My entire music library is 'only" 40GB so the iPhone could hold it all.

Only problem: iTunes on my Macbook Pro does not recognize the iPhone 6. I keep getting error messages when trying to connect to it. I suspect the firmware is too old (on the Mac / too new on the iPhone)... I could not even wipe the iPhone with that old Mac because it couldn't connect to the Apple servers.

The iPhone 6 is completely empty and has iTunes! (Not Apple Music but actual iTunes). It even filled with some tracks I had bought (not sure how).

What would you do in this situation? Are there any workarounds?

My old Macbook Pro is running iOS version 10.8.5 and iTunes is on version 12.0.1.26.

My iPhone 6 (wiped clean and re-associated to my Apple ID) is running software version 12.5.7.

Apple discontinued iTunes support years ago in favor of Apple Music and streaming subscriptions (no wonder, because 💰💰💰💰💰).

I wish I could put my entire music library on my iPhone 6, le sigh. I technically wouldn't even need Jellyfin.

I also have an iPod Touch (1gen) that may connect to my Macbook Pro but its capacity is only 16GB.

What would you do?

#AskFedi #AdviceNeeded #music #BigTech

Actually y'know what i'm just gonna shoot this shot.

Hello tech and sysadmin people of fedi: if you're running an active IRC server. Can you give some pointers on setting up an (out-of-network, so not really connected to any other servers) IRC server for a very small group? Also some pointers for stuff like Anope/similar management tools.

I'm not exactly server-savvy, since my experience is writing 100% offline software, but i'd like to get off discord with my friends.

I really don't know what to do about this server. The development of #Firefish was abandoned last year. If I downgrade to an earlier version, I can then migrate to #IceShrimpJS and eventually #IceShrimpNet. I like this because then I could go back to using @[email protected] on my phone. I'm (reasonably) hesitant to rely on a smaller project again, though. I've got no qualms about setting up and using @[email protected] but starting from scratch would necessitate using a different subdomain.

Why do YOU think I should do? Is there a satisfactory option I've not considered?

#feditips #fedihelp #adviceneeded

I really don't know what to do about this server. The development of #Firefish was abandoned last year. If I downgrade to an earlier version, I can then migrate to #IceShrimpJS and eventually #IceShrimpNet. I like this because then I could go back to using @[email protected] on my phone. I'm (reasonably) hesitant to rely on a smaller project again, though. I've got no qualms about setting up and using @[email protected] but starting from scratch would necessitate using a different subdomain.

Why do YOU think I should do? Is there a satisfactory option I've not considered?

#feditips #fedihelp #adviceneeded

I really don't know what to do about this server. The development of #Firefish was abandoned last year. If I downgrade to an earlier version, I can then migrate to #IceShrimpJS and eventually #IceShrimpNet. I like this because then I could go back to using @[email protected] on my phone. I'm (reasonably) hesitant to rely on a smaller project again, though. I've got no qualms about setting up and using @[email protected] but starting from scratch would necessitate using a different subdomain.

Why do YOU think I should do? Is there a satisfactory option I've not considered?

#feditips #fedihelp #adviceneeded

I really don't know what to do about this server. The development of #Firefish was abandoned last year. If I downgrade to an earlier version, I can then migrate to #IceShrimpJS and eventually #IceShrimpNet. I like this because then I could go back to using @[email protected] on my phone. I'm (reasonably) hesitant to rely on a smaller project again, though. I've got no qualms about setting up and using @[email protected] but starting from scratch would necessitate using a different subdomain.

Why do YOU think I should do? Is there a satisfactory option I've not considered?

#feditips #fedihelp #adviceneeded

I really don't know what to do about this server. The development of #Firefish was abandoned last year. If I downgrade to an earlier version, I can then migrate to #IceShrimpJS and eventually #IceShrimpNet. I like this because then I could go back to using @[email protected] on my phone. I'm (reasonably) hesitant to rely on a smaller project again, though. I've got no qualms about setting up and using @[email protected] but starting from scratch would necessitate using a different subdomain.

Why do YOU think I should do? Is there a satisfactory option I've not considered?

#feditips #fedihelp #adviceneeded

Serious question. How does one make friends when they are close to 30? #AdviceNeeded

Any chooms got some 3D printing advice?

I have a bedslinger (Sovol SV06 ACE, PLA), and any lower profile prints have been perfect, but I wanted to try this cool paper-holding rat to print for my son, and I have tried 3 times and it comes loose from the bed near the top of the print. Of course then it just air prints.

Things I have tried:

• Cleaning the bed with 96% ethanol (I do that before each print anyway)
• Using hairspray on the bed
• Increasing the first layer thickness
• Adjusting the z-offset for more squish
• Adding a skirt of 8mm
• Checking all the temp settings: bed 60C, first layer 210C print temp 200C (as specified on the PLA spool)

I'm using orcaslicer, I think the one thing that's left to try is reducing the print speed, but I hoped that wouldn't be needed...Maybe there is a way to slow the print as you get further up? Or maybe because I'm such a n00b I missed something obvbious

#3dprint #3dprinting #orcaslicer #slicer #bedslinger #AdvicePlease #AdviceNeeded #hardware

Any chooms got some 3D printing advice?

I have a bedslinger (Sovol SV06 ACE, PLA), and any lower profile prints have been perfect, but I wanted to try this cool paper-holding rat to print for my son, and I have tried 3 times and it comes loose from the bed near the top of the print. Of course then it just air prints.

Things I have tried:

• Cleaning the bed with 96% ethanol (I do that before each print anyway)
• Using hairspray on the bed
• Increasing the first layer thickness
• Adjusting the z-offset for more squish
• Adding a skirt of 8mm
• Checking all the temp settings: bed 60C, first layer 210C print temp 200C (as specified on the PLA spool)

I'm using orcaslicer, I think the one thing that's left to try is reducing the print speed, but I hoped that wouldn't be needed...Maybe there is a way to slow the print as you get further up? Or maybe because I'm such a n00b I missed something obvbious

#3dprint #3dprinting #orcaslicer #slicer #bedslinger #AdvicePlease #AdviceNeeded #hardware

Any chooms got some 3D printing advice?

I have a bedslinger (Sovol SV06 ACE, PLA), and any lower profile prints have been perfect, but I wanted to try this cool paper-holding rat to print for my son, and I have tried 3 times and it comes loose from the bed near the top of the print. Of course then it just air prints.

Things I have tried:

• Cleaning the bed with 96% ethanol (I do that before each print anyway)
• Using hairspray on the bed
• Increasing the first layer thickness
• Adjusting the z-offset for more squish
• Adding a skirt of 8mm
• Checking all the temp settings: bed 60C, first layer 210C print temp 200C (as specified on the PLA spool)

I'm using orcaslicer, I think the one thing that's left to try is reducing the print speed, but I hoped that wouldn't be needed...Maybe there is a way to slow the print as you get further up? Or maybe because I'm such a n00b I missed something obvbious

#3dprint #3dprinting #orcaslicer #slicer #bedslinger #AdvicePlease #AdviceNeeded #hardware

Any chooms got some 3D printing advice?

I have a bedslinger (Sovol SV06 ACE, PLA), and any lower profile prints have been perfect, but I wanted to try this cool paper-holding rat to print for my son, and I have tried 3 times and it comes loose from the bed near the top of the print. Of course then it just air prints.

Things I have tried:

• Cleaning the bed with 96% ethanol (I do that before each print anyway)
• Using hairspray on the bed
• Increasing the first layer thickness
• Adjusting the z-offset for more squish
• Adding a skirt of 8mm
• Checking all the temp settings: bed 60C, first layer 210C print temp 200C (as specified on the PLA spool)

I'm using orcaslicer, I think the one thing that's left to try is reducing the print speed, but I hoped that wouldn't be needed...Maybe there is a way to slow the print as you get further up? Or maybe because I'm such a n00b I missed something obvbious

#3dprint #3dprinting #orcaslicer #slicer #bedslinger #AdvicePlease #AdviceNeeded #hardware

Any chooms got some 3D printing advice?

I have a bedslinger (Sovol SV06 ACE, PLA), and any lower profile prints have been perfect, but I wanted to try this cool paper-holding rat to print for my son, and I have tried 3 times and it comes loose from the bed near the top of the print. Of course then it just air prints.

Things I have tried:

• Cleaning the bed with 96% ethanol (I do that before each print anyway)
• Using hairspray on the bed
• Increasing the first layer thickness
• Adjusting the z-offset for more squish
• Adding a skirt of 8mm
• Checking all the temp settings: bed 60C, first layer 210C print temp 200C (as specified on the PLA spool)

I'm using orcaslicer, I think the one thing that's left to try is reducing the print speed, but I hoped that wouldn't be needed...Maybe there is a way to slow the print as you get further up? Or maybe because I'm such a n00b I missed something obvbious

#3dprint #3dprinting #orcaslicer #slicer #bedslinger #AdvicePlease #AdviceNeeded #hardware

The day is closing here in the UK and I have a question for you, #Fediverse citizens.

Would anybody here share their experience with Tor?

This is a follow up on my quest for alternative browsers ( https://mastodon.design/@alx/114788807278904234 )

Thank you all in advance!

#FediTips #advice #AdviceNeeded #browser #AlternativeTo

My 1st laptop was dell that lasted for 10+ years, 2nd was an acer linux that didn't last long, and I have been using an ipad (work issued) for 8+ years. I mainly need the laptop for bidding & trading my work schedule. I would like a fairly large screen and low weight; & Would like it to last for 10+ years. #suggestions #adviceNeeded #adviceWanted

Hello #fediverse! I need suggestions for a new laptop. I am most comfortable with windows PCs & have been anti Apple (mostly bc they have less storage for more $) but I do not like windows 10 or 11. I do not want copilot or any AI horseshit or spyware disguised as a service. I know that people are going to suggest Linux but I had a Linux laptop that died & I don't have time to maintain it. I will probably purchase from Costco. Is a MacBook worth the money? #adviceWanted #adviceNeeded

Hello #Fediverse,
I need your help again. I want to ditch #Spotify because fck all who support genocide, so here we are:
- advice for a new podcast streamer (no Apple)
- advice for a new music streamer (I already use Indie Beat radio when studying/writing)

So, #FediCitizens, do your magic again

#advice #AdviceNeeded #AlternativeTo #alternative #music #streaming #podcast

People of the #Fediverse do your thing, again! I need tips for a browser beyond the usual. I'm currently using #Firefox (my browser of choice for a very long time), but tabs recently keep crashing all the time - an it's particularly annoying when (for work) I am doing something on a platform that doesn't save things automatically (notoriously my uni stuff).

So, write me your suggestions for a private, stable, and reliable browser!

#FediTips #advice #AdviceNeeded #browser #AlternativeTo

Regarding open-source automation for remote server stuff I'm pondering about use Ansible or Fabric!

- Asible: https://docs.ansible.com/
- Fabric: https://www.fabfile.org/

Any suggestion or advice from your experience?

#automation #ansible #fabric #AdviceNeeded

Advice needed:

I want to buy a domain name to play with self-hosting but want one with a fairly consistent annual payment. So many seem to be cheap in year one and then 5-10x that in subsequent years.

Any recommendations for a reliable and non-exploitative registrar?

Thanks in advance

#DomainRegistration #TLD #AdviceNeeded

🌟 **3D Printer Recommendations Needed!** 🌟

I’m diving into the world of additive manufacturing and need your help!

I’m looking for an inexpensive 3D printer (under $500) that’s perfect for a free and open-source software (FOSS) enthusiast like me.

🔍 Here are my criteria:
- **Budget:** Under $500
- **User-Friendly:** Easier to start with than a Voron 2.4
- **Hacking-Friendly:** I’d love the ability to tinker and customize!

What 3D printer would you recommend for someone just starting out? Share your thoughts and experiences in the comments! Your insights will help me make the right choice. Thank you! 😊

#3DPrinting #AdditiveManufacturing #FOSS #OpenSource #3DPrinterRecommendations
#3DPrintingCommunity
#MakerMovement
#DIY3DPrinting
#3DPrint
#AdditiveManufacturing
#FOSS
#OpenSourceHardware
#CrealityEnder3
#Ender3
#Creality3D
#3DPrinting
#ElegooNeptune2
#Elegoo
#Neptune2
#Ender3V2Neo
#3DPrinter
#FLASHFORGE
#Adventurer5M
#FLASHFORGE3D
#SidewinderX3Plus
#Artillery3D
#Sidewinder3DPrinter
#Ender3KE
#Creality
#AnycubicKobra2Max
#Anycubic
#Kobra2Max
#Neptune4
#ElegooNeptune4
#TronxyX5SA
#Tronxy
#X5SA
#CrealityK1
#K1
#PrusaI3MK3S
#Prusa
#MK3S
#Used3DPrinter
#SovolSV08
#SV08
#MonopriceJoule
#Monoprice
#Joule
#3DPrinterRecommendations
#3DPrinter
#3DPrinting
#AdditiveManufacturing
#FOSS
#OpenSource
#Newbie
#3DPrintingCommunity
#Beginner
#Newbie
#Maker
#Question
#3D #3Dadvice #AdviceNeeded #3DPrintingCommunity #MakerCommunity #CreativeCommunity #3DCommunity

🌟 **3D Printer Recommendations Needed!** 🌟

I’m diving into the world of additive manufacturing and need your help!

I’m looking for an inexpensive 3D printer (under $500) that’s perfect for a free and open-source software (FOSS) enthusiast like me.

🔍 Here are my criteria:
- **Budget:** Under $500
- **User-Friendly:** Easier to start with than a Voron 2.4
- **Hacking-Friendly:** I’d love the ability to tinker and customize!

What 3D printer would you recommend for someone just starting out? Share your thoughts and experiences in the comments! Your insights will help me make the right choice. Thank you! 😊

#3DPrinting #AdditiveManufacturing #FOSS #OpenSource #3DPrinterRecommendations
#3DPrintingCommunity
#MakerMovement
#DIY3DPrinting
#3DPrint
#AdditiveManufacturing
#FOSS
#OpenSourceHardware
#CrealityEnder3
#Ender3
#Creality3D
#3DPrinting
#ElegooNeptune2
#Elegoo
#Neptune2
#Ender3V2Neo
#3DPrinter
#FLASHFORGE
#Adventurer5M
#FLASHFORGE3D
#SidewinderX3Plus
#Artillery3D
#Sidewinder3DPrinter
#Ender3KE
#Creality
#AnycubicKobra2Max
#Anycubic
#Kobra2Max
#Neptune4
#ElegooNeptune4
#TronxyX5SA
#Tronxy
#X5SA
#CrealityK1
#K1
#PrusaI3MK3S
#Prusa
#MK3S
#Used3DPrinter
#SovolSV08
#SV08
#MonopriceJoule
#Monoprice
#Joule
#3DPrinterRecommendations
#3DPrinter
#3DPrinting
#AdditiveManufacturing
#FOSS
#OpenSource
#Newbie
#3DPrintingCommunity
#Beginner
#Newbie
#Maker
#Question
#3D #3Dadvice #AdviceNeeded #3DPrintingCommunity #MakerCommunity #CreativeCommunity #3DCommunity

🌟 **3D Printer Recommendations Needed!** 🌟

I’m diving into the world of additive manufacturing and need your help!

I’m looking for an inexpensive 3D printer (under $500) that’s perfect for a free and open-source software (FOSS) enthusiast like me.

🔍 Here are my criteria:
- **Budget:** Under $500
- **User-Friendly:** Easier to start with than a Voron 2.4
- **Hacking-Friendly:** I’d love the ability to tinker and customize!

What 3D printer would you recommend for someone just starting out? Share your thoughts and experiences in the comments! Your insights will help me make the right choice. Thank you! 😊

#3DPrinting #AdditiveManufacturing #FOSS #OpenSource #3DPrinterRecommendations
#3DPrintingCommunity
#MakerMovement
#DIY3DPrinting
#3DPrint
#AdditiveManufacturing
#FOSS
#OpenSourceHardware
#CrealityEnder3
#Ender3
#Creality3D
#3DPrinting
#ElegooNeptune2
#Elegoo
#Neptune2
#Ender3V2Neo
#3DPrinter
#FLASHFORGE
#Adventurer5M
#FLASHFORGE3D
#SidewinderX3Plus
#Artillery3D
#Sidewinder3DPrinter
#Ender3KE
#Creality
#AnycubicKobra2Max
#Anycubic
#Kobra2Max
#Neptune4
#ElegooNeptune4
#TronxyX5SA
#Tronxy
#X5SA
#CrealityK1
#K1
#PrusaI3MK3S
#Prusa
#MK3S
#Used3DPrinter
#SovolSV08
#SV08
#MonopriceJoule
#Monoprice
#Joule
#3DPrinterRecommendations
#3DPrinter
#3DPrinting
#AdditiveManufacturing
#FOSS
#OpenSource
#Newbie
#3DPrintingCommunity
#Beginner
#Newbie
#Maker
#Question
#3D #3Dadvice #AdviceNeeded #3DPrintingCommunity #MakerCommunity #CreativeCommunity #3DCommunity

🌟 **3D Printer Recommendations Needed!** 🌟

I’m diving into the world of additive manufacturing and need your help!

I’m looking for an inexpensive 3D printer (under $500) that’s perfect for a free and open-source software (FOSS) enthusiast like me.

🔍 Here are my criteria:
- **Budget:** Under $500
- **User-Friendly:** Easier to start with than a Voron 2.4
- **Hacking-Friendly:** I’d love the ability to tinker and customize!

What 3D printer would you recommend for someone just starting out? Share your thoughts and experiences in the comments! Your insights will help me make the right choice. Thank you! 😊

#3DPrinting #AdditiveManufacturing #FOSS #OpenSource #3DPrinterRecommendations
#3DPrintingCommunity
#MakerMovement
#DIY3DPrinting
#3DPrint
#AdditiveManufacturing
#FOSS
#OpenSourceHardware
#CrealityEnder3
#Ender3
#Creality3D
#3DPrinting
#ElegooNeptune2
#Elegoo
#Neptune2
#Ender3V2Neo
#3DPrinter
#FLASHFORGE
#Adventurer5M
#FLASHFORGE3D
#SidewinderX3Plus
#Artillery3D
#Sidewinder3DPrinter
#Ender3KE
#Creality
#AnycubicKobra2Max
#Anycubic
#Kobra2Max
#Neptune4
#ElegooNeptune4
#TronxyX5SA
#Tronxy
#X5SA
#CrealityK1
#K1
#PrusaI3MK3S
#Prusa
#MK3S
#Used3DPrinter
#SovolSV08
#SV08
#MonopriceJoule
#Monoprice
#Joule
#3DPrinterRecommendations
#3DPrinter
#3DPrinting
#AdditiveManufacturing
#FOSS
#OpenSource
#Newbie
#3DPrintingCommunity
#Beginner
#Newbie
#Maker
#Question
#3D #3Dadvice #AdviceNeeded #3DPrintingCommunity #MakerCommunity #CreativeCommunity #3DCommunity

🌟 **3D Printer Recommendations Needed!** 🌟

I’m diving into the world of additive manufacturing and need your help!

I’m looking for an inexpensive 3D printer (under $500) that’s perfect for a free and open-source software (FOSS) enthusiast like me.

🔍 Here are my criteria:
- **Budget:** Under $500
- **User-Friendly:** Easier to start with than a Voron 2.4
- **Hacking-Friendly:** I’d love the ability to tinker and customize!

What 3D printer would you recommend for someone just starting out? Share your thoughts and experiences in the comments! Your insights will help me make the right choice. Thank you! 😊

#3DPrinting #AdditiveManufacturing #FOSS #OpenSource #3DPrinterRecommendations
#3DPrintingCommunity
#MakerMovement
#DIY3DPrinting
#3DPrint
#AdditiveManufacturing
#FOSS
#OpenSourceHardware
#CrealityEnder3
#Ender3
#Creality3D
#3DPrinting
#ElegooNeptune2
#Elegoo
#Neptune2
#Ender3V2Neo
#3DPrinter
#FLASHFORGE
#Adventurer5M
#FLASHFORGE3D
#SidewinderX3Plus
#Artillery3D
#Sidewinder3DPrinter
#Ender3KE
#Creality
#AnycubicKobra2Max
#Anycubic
#Kobra2Max
#Neptune4
#ElegooNeptune4
#TronxyX5SA
#Tronxy
#X5SA
#CrealityK1
#K1
#PrusaI3MK3S
#Prusa
#MK3S
#Used3DPrinter
#SovolSV08
#SV08
#MonopriceJoule
#Monoprice
#Joule
#3DPrinterRecommendations
#3DPrinter
#3DPrinting
#AdditiveManufacturing
#FOSS
#OpenSource
#Newbie
#3DPrintingCommunity
#Beginner
#Newbie
#Maker
#Question
#3D #3Dadvice #AdviceNeeded #3DPrintingCommunity #MakerCommunity #CreativeCommunity #3DCommunity

🌟 Hey everyone! I'm super excited to dive into the world of 3D printing! 🚀 As a complete beginner, I’d love to hear your tips and recommendations on where to start. What printer do you suggest for newbies? Any must-know resources? Thanks in advance! 💡
Can’t wait to hear your thoughts! 😊 #3DPrint #Newbie #3DPrintingCommunity
#3DPrinting #Beginner #MakerCommunity
#3DPrinting #AdviceNeeded #CreativeCommunity

@gressplener ☝️ Some tags for the above post. See the whole thread 🧵

#askFedi #askMastodon #makerSpace #temperatureSensor #technology #AdviceNeeded #AdviceWelcomed #diy #diy_electronics

@gressplener ☝️ Some tags for the above post. See the whole thread 🧵

#askFedi #askMastodon #makerSpace #temperatureSensor #technology #AdviceNeeded #AdviceWelcomed #diy #diy_electronics

@gressplener ☝️ Some tags for the above post. See the whole thread 🧵

#askFedi #askMastodon #makerSpace #temperatureSensor #technology #AdviceNeeded #AdviceWelcomed #diy #diy_electronics

@gressplener ☝️ Some tags for the above post. See the whole thread 🧵

#askFedi #askMastodon #makerSpace #temperatureSensor #technology #AdviceNeeded #AdviceWelcomed #diy #diy_electronics

@gressplener ☝️ Some tags for the above post. See the whole thread 🧵

#askFedi #askMastodon #makerSpace #temperatureSensor #technology #AdviceNeeded #AdviceWelcomed #diy #diy_electronics

Got some more work done. The skirt feels off though? Need some advice I think

#roughdraft #rough #draft #outline #adviceneeded #digitalart #digital #art

Hey folks, am considering pursuing post-graduate studies for a career geared towards data/technical product management, project management or innovation/change management. Any recommendations for #masters programmes? #AdviceNeeded #adviceplease

Hey folks, am considering pursuing post-graduate studies for a career geared towards data/technical product management, project management or innovation/change management. Any recommendations for #masters programmes? #AdviceNeeded #adviceplease

I need a new office chair. I'm spending my days at my desk programming, thus looking for a good one and ok to invest some money into it. But not interesting in gaming chairs. Any recommendations ?

#AdviceNeeded #officechair

I was administed a really difficult questionnaire at work. #adviceNeeded to #help find the correct answers

@actuallyautistic #adviceplease #advicewanted #advice

I was administed a really difficult questionnaire at work. #adviceNeeded to #help find the correct answers

@actuallyautistic #adviceplease #advicewanted #advice #communication #teachers

I was administed a really difficult questionnaire at work. #adviceNeeded to #help find the correct answers

@actuallyautistic #adviceplease #advicewanted #advice