#flexradio — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #flexradio, aggregated by home.social.
-
Thought I'd check out https://github.com/aethersdr/AetherSDR (#flexradio client for #linux and #macos).
Since I'd just added a NVME drive alongside FDE to my #clockworkpi #uconsole, I installed it on there.
Aside from the geekyness of the uConsole stuff #AetherSDR an impressively featured piece of software.
-
Thought I'd check out https://github.com/aethersdr/AetherSDR (#flexradio client for #linux and #macos).
Since I'd just added a NVME drive alongside FDE to my #clockworkpi #uconsole, I installed it on there.
Aside from the geekyness of the uConsole stuff #AetherSDR an impressively featured piece of software.
-
Thought I'd check out https://github.com/aethersdr/AetherSDR (#flexradio client for #linux and #macos).
Since I'd just added a NVME drive alongside FDE to my #clockworkpi #uconsole, I installed it on there.
Aside from the geekyness of the uConsole stuff #AetherSDR an impressively featured piece of software.
-
Thought I'd check out https://github.com/aethersdr/AetherSDR (#flexradio client for #linux and #macos).
Since I'd just added a NVME drive alongside FDE to my #clockworkpi #uconsole, I installed it on there.
Aside from the geekyness of the uConsole stuff #AetherSDR an impressively featured piece of software.
-
Very cool - FlexRadio 800 series (and Aurora) now support installing and running the #freedv waveform on-device.
https://github.com/drowe67/freedv-gui/blob/master/src/integrations/flex/README.md
I never expected to be able to run a container directly on my #flexradio. Doesn't look like Marcus #smartsdr supports this yet but can't imagine it'll be far behind.
-
There is hope for us #Linux users to natively run a #Flexradio !!
https://github.com/ten9876/AetherSDR -
There is hope for us #Linux users to natively run a #Flexradio !!
https://github.com/ten9876/AetherSDR -
There is hope for us #Linux users to natively run a #Flexradio !!
https://github.com/ten9876/AetherSDR -
There is hope for us #Linux users to natively run a #Flexradio !!
https://github.com/ten9876/AetherSDR -
Vibes from the #Disobey Nordic Security Event in Helsinki last weekend where we were promoting #hamradio at the Finnish #AmateurRadio League SRAL booth.
Live RF demos (DVB-S transmissions, modified Vaisala RS41 radiosondes, remote #FlexRadio station and custom SDR transceivers) + 1/4-wavelength antenna workshop kept visitors busy!
-
Vibes from the #Disobey Nordic Security Event in Helsinki last weekend where we were promoting #hamradio at the Finnish #AmateurRadio League SRAL booth.
Live RF demos (DVB-S transmissions, modified Vaisala RS41 radiosondes, remote #FlexRadio station and custom SDR transceivers) + 1/4-wavelength antenna workshop kept visitors busy!
-
Can anybody help me out with suggestions for a #144mhz low power amplifier for my #flexradio.
My 6700 only provides 10dBm (0.01 watt) which isn’t enough for my #qo100 transverter. I’m looking for something to kick that up to at least 30dBm (1 watt).
I could use one of the ANT ports on the 6700 but I use both on HF and to be honest, it’s more likely I’d accidentally send 100w to the transverter by accident ;)
-
Can anybody help me out with suggestions for a #144mhz low power amplifier for my #flexradio.
My 6700 only provides 10dBm (0.01 watt) which isn’t enough for my #qo100 transverter. I’m looking for something to kick that up to at least 30dBm (1 watt).
I could use one of the ANT ports on the 6700 but I use both on HF and to be honest, it’s more likely I’d accidentally send 100w to the transverter by accident ;)
-
I’ve been attempting to get the #freedv AppImage for #flexradio running on the RPi4 I use as my Allstar Node. I couldn’t get it to decode.
Managed to get it running on my #uconsole and received ON4LX operating on #qo100.
Spoiler: there is a firewall on the Allstar Node.
-
Hello all! Name is Neil and based in north east England. Work in software development (mostly infrastructure at the moment). Returned to radio about 4y ago after a 20y hiatus (was first licenced when I was about 10yo). Spend most of my time on HF and digital but getting more into SSB. Running a #flexradio 6400 and a Maestro into an end fed wire or Stealth Loop. Also have an interest in #fusion, #dstar and #dmr. Ride a #triumph #sprintst and have an #Icom705 for portable work. 73! #introductions
-
Just added the new Lynovation CTR2-Quad to my store https://shop.g7ufo.radio/s/d1fd1a if you're looking for to pick one of these up. I build and ship these from the UK.
This can act as a midi controller so any SDR software which accepts midi can be used with the CTR2-Uno, Duo or Quad, communicating via USB or Bluetooth. #icom #yaesu #kenwood #elecraft
If you have a #flexradio it can alternatively connect to the radio directly via WiFi.
-
Fired up the #FlexRadio Maestro that I rarely use these days. Couldn't find the AC power adapter so I jerry-rigged a PowerPole to barrel adapter and connected a #DenCo battery.
-
dude, I just figured out how to add support for FREEDV2 on Flex using JJ Flex. It will be accessible, will install the freedv2 system onto your pi, and activate then use the node. #hamradio #flexradio O
-
WoodBoxRadio Tmate2: контроллер для радиолюбителя
Любительская КВ-радиосвязь — прекрасное, но дорогое хобби. Причем порог входа сейчас не слишком велик: можно дешево купить б/у трансивер, а антенну сделать буквально из кусков провода и старой удочки. Но уже после первой сотни стран и получения наград вроде DXCC начинаешь упираться в тот самый предел, который значительно разделяет мир самодельного и коммерческого оборудования. Внезапно оказывается, что для успешной «охоты» за редкими странами нужен не только хороший трансивер и антенна — требуется удобное рабочее место, позволяющее быстро настроиться на частоту, не упуская из поля зрения остальные. Тут сразу возникает дилемма: железо достаточно громоздкое, а место на столе не бесконечное. Отчасти это можно решить с помощью внешнего контроллера. Один из таких — WoodBoxRadio Tmate2 — недавно оказался на моем рабочем столе, и сегодня я про него расскажу.
https://habr.com/ru/companies/ru_mts/articles/987022/
#SDR #Любительская_радиосвязь #Радиооборудование #Электроника #Контроллеры #DIY #Обзор_оборудования #FlexRadio #Программноопределяемые_радио #Радиолюбительство
-
@ian I think #spothole may be able to simplify the #nodered flow I use for my #flexradio setup. #smartsdr (Mac/iOS) does offer POTA and DX cluster spots but I have a nice setup which colours them.
Currently grabbing feeds, de-duping them and then posting. Will report back!
-
Always wanted to build a TeensyMaestro for my #flexradio and the new board by Simon, N0VE (and firmware updates by Len KD0RC) made it much easier to do.
I designed a case for it which includes holes for a VESA compatible mount.
Really enjoyed the build (yes, even including installing the 63 caps!).
As I was buying the boards and components I ordered a few more and made a kit available on my shop (https://shop.g7ufo.radio/collections/teensymaestro). There are still a few available if anyone is interested.
-
Just arrived! The @n6ara TinyMIDI https://n6ara.com/product/n6ara-tinymidi/ will be using this for impromptu #cw practice (and eventually QSOs on my #flexradio.
-
Some #QSOs recorded yesterday evening - 10m SSB. Mostly with European stations.
Huge QSB - #HAM #HamRadio #FlexRadio
-
I’ve been attempting to get the #freedv AppImage for #flexradio running on the RPi4 I use as my Allstar Node. I couldn’t get it to decode.
Managed to get it running on my #uconsole and received ON4LX operating on #qo100.
Spoiler: there is a firewall on the Allstar Node.
-
I’ve been attempting to get the #freedv AppImage for #flexradio running on the RPi4 I use as my Allstar Node. I couldn’t get it to decode.
Managed to get it running on my #uconsole and received ON4LX operating on #qo100.
Spoiler: there is a firewall on the Allstar Node.
-
I’ve been attempting to get the #freedv AppImage for #flexradio running on the RPi4 I use as my Allstar Node. I couldn’t get it to decode.
Managed to get it running on my #uconsole and received ON4LX operating on #qo100.
Spoiler: there is a firewall on the Allstar Node.
-
I’ve been attempting to get the #freedv AppImage for #flexradio running on the RPi4 I use as my Allstar Node. I couldn’t get it to decode.
Managed to get it running on my #uconsole and received ON4LX operating on #qo100.
Spoiler: there is a firewall on the Allstar Node.
-
WoodBoxRadio Tmate2: контроллер для радиолюбителя
Любительская КВ-радиосвязь — прекрасное, но дорогое хобби. Причем порог входа сейчас не слишком велик: можно дешево купить б/у трансивер, а антенну сделать буквально из кусков провода и старой удочки. Но уже после первой сотни стран и получения наград вроде DXCC начинаешь упираться в тот самый предел, который значительно разделяет мир самодельного и коммерческого оборудования. Внезапно оказывается, что для успешной «охоты» за редкими странами нужен не только хороший трансивер и антенна — требуется удобное рабочее место, позволяющее быстро настроиться на частоту, не упуская из поля зрения остальные. Тут сразу возникает дилемма: железо достаточно громоздкое, а место на столе не бесконечное. Отчасти это можно решить с помощью внешнего контроллера. Один из таких — WoodBoxRadio Tmate2 — недавно оказался на моем рабочем столе, и сегодня я про него расскажу.
https://habr.com/ru/companies/ru_mts/articles/987022/
#SDR #Любительская_радиосвязь #Радиооборудование #Электроника #Контроллеры #DIY #Обзор_оборудования #FlexRadio #Программноопределяемые_радио #Радиолюбительство
-
WoodBoxRadio Tmate2: контроллер для радиолюбителя
Любительская КВ-радиосвязь — прекрасное, но дорогое хобби. Причем порог входа сейчас не слишком велик: можно дешево купить б/у трансивер, а антенну сделать буквально из кусков провода и старой удочки. Но уже после первой сотни стран и получения наград вроде DXCC начинаешь упираться в тот самый предел, который значительно разделяет мир самодельного и коммерческого оборудования. Внезапно оказывается, что для успешной «охоты» за редкими странами нужен не только хороший трансивер и антенна — требуется удобное рабочее место, позволяющее быстро настроиться на частоту, не упуская из поля зрения остальные. Тут сразу возникает дилемма: железо достаточно громоздкое, а место на столе не бесконечное. Отчасти это можно решить с помощью внешнего контроллера. Один из таких — WoodBoxRadio Tmate2 — недавно оказался на моем рабочем столе, и сегодня я про него расскажу.
https://habr.com/ru/companies/ru_mts/articles/987022/
#SDR #Любительская_радиосвязь #Радиооборудование #Электроника #Контроллеры #DIY #Обзор_оборудования #FlexRadio #Программноопределяемые_радио #Радиолюбительство
-
WoodBoxRadio Tmate2: контроллер для радиолюбителя
Любительская КВ-радиосвязь — прекрасное, но дорогое хобби. Причем порог входа сейчас не слишком велик: можно дешево купить б/у трансивер, а антенну сделать буквально из кусков провода и старой удочки. Но уже после первой сотни стран и получения наград вроде DXCC начинаешь упираться в тот самый предел, который значительно разделяет мир самодельного и коммерческого оборудования. Внезапно оказывается, что для успешной «охоты» за редкими странами нужен не только хороший трансивер и антенна — требуется удобное рабочее место, позволяющее быстро настроиться на частоту, не упуская из поля зрения остальные. Тут сразу возникает дилемма: железо достаточно громоздкое, а место на столе не бесконечное. Отчасти это можно решить с помощью внешнего контроллера. Один из таких — WoodBoxRadio Tmate2 — недавно оказался на моем рабочем столе, и сегодня я про него расскажу.
https://habr.com/ru/companies/ru_mts/articles/987022/
#SDR #Любительская_радиосвязь #Радиооборудование #Электроника #Контроллеры #DIY #Обзор_оборудования #FlexRadio #Программноопределяемые_радио #Радиолюбительство
-
This print (and build) was something else I designed initially for myself.
I’ve uploaded the case design to printables but it is available as a kit as well as fully assembled (with all components) at https://shop.g7ufo.radio
I use a Lynovation CTR2-MIDI as a #midicontroller for my #flexradio and #ic705 but this does support others. My only gripe was that adding a battery added bulk and cables. This is also compatible with the CTR2-Micro
-
This print (and build) was something else I designed initially for myself.
I’ve uploaded the case design to printables but it is available as a kit as well as fully assembled (with all components) at https://shop.g7ufo.radio
I use a Lynovation CTR2-MIDI as a #midicontroller for my #flexradio and #ic705 but this does support others. My only gripe was that adding a battery added bulk and cables. This is also compatible with the CTR2-Micro
-
@ian I think #spothole may be able to simplify the #nodered flow I use for my #flexradio setup. #smartsdr (Mac/iOS) does offer POTA and DX cluster spots but I have a nice setup which colours them.
Currently grabbing feeds, de-duping them and then posting. Will report back!
-
@ian I think #spothole may be able to simplify the #nodered flow I use for my #flexradio setup. #smartsdr (Mac/iOS) does offer POTA and DX cluster spots but I have a nice setup which colours them.
Currently grabbing feeds, de-duping them and then posting. Will report back!
-
@ian I think #spothole may be able to simplify the #nodered flow I use for my #flexradio setup. #smartsdr (Mac/iOS) does offer POTA and DX cluster spots but I have a nice setup which colours them.
Currently grabbing feeds, de-duping them and then posting. Will report back!
-
@ian I think #spothole may be able to simplify the #nodered flow I use for my #flexradio setup. #smartsdr (Mac/iOS) does offer POTA and DX cluster spots but I have a nice setup which colours them.
Currently grabbing feeds, de-duping them and then posting. Will report back!
-
How to connect, setup and operate #FlexRadio 6400 and #ACOM 1010 Lineal Amplifier.
-
Just added the new Lynovation CTR2-Quad to my store https://shop.g7ufo.radio/s/d1fd1a if you're looking for to pick one of these up. I build and ship these from the UK.
This can act as a midi controller so any SDR software which accepts midi can be used with the CTR2-Uno, Duo or Quad, communicating via USB or Bluetooth. #icom #yaesu #kenwood #elecraft
If you have a #flexradio it can alternatively connect to the radio directly via WiFi.
-
Just added the new Lynovation CTR2-Quad to my store https://shop.g7ufo.radio/s/d1fd1a if you're looking for to pick one of these up. I build and ship these from the UK.
This can act as a midi controller so any SDR software which accepts midi can be used with the CTR2-Uno, Duo or Quad, communicating via USB or Bluetooth. #icom #yaesu #kenwood #elecraft
If you have a #flexradio it can alternatively connect to the radio directly via WiFi.
-
Just added the new Lynovation CTR2-Quad to my store https://shop.g7ufo.radio/s/d1fd1a if you're looking for to pick one of these up. I build and ship these from the UK.
This can act as a midi controller so any SDR software which accepts midi can be used with the CTR2-Uno, Duo or Quad, communicating via USB or Bluetooth. #icom #yaesu #kenwood #elecraft
If you have a #flexradio it can alternatively connect to the radio directly via WiFi.
-
Just added the new Lynovation CTR2-Quad to my store https://shop.g7ufo.radio/s/d1fd1a if you're looking for to pick one of these up. I build and ship these from the UK.
This can act as a midi controller so any SDR software which accepts midi can be used with the CTR2-Uno, Duo or Quad, communicating via USB or Bluetooth. #icom #yaesu #kenwood #elecraft
If you have a #flexradio it can alternatively connect to the radio directly via WiFi.
