#optocoupler — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #optocoupler, aggregated by home.social.
-
One-Way Data Extraction For Logging On Airgapped Systems https://hackaday.com/2025/11/27/one-way-data-extraction-for-logging-on-airgapped-systems/ #airgappedsystem #SecurityHacks #optocoupler #raspberrypi #airgapped #airgap #light #led
-
2025 Component Abuse Challenge: The Opto Flasher https://hackaday.com/2025/10/29/2025-component-abuse-challenge-the-opto-flasher/ #2025ComponentAbuseChallenge #optocoupler #contests #Parts
-
2025 Component Abuse Challenge: The Opto Flasher - There’s a part you’ll find in almost every mains powered switch mode power supply ... - https://hackaday.com/2025/10/29/2025-component-abuse-challenge-the-opto-flasher/ #2025componentabusechallenge #optocoupler #contests #parts
-
Lazy Sunday afternoon project, a simple *PC817 OptoCoupler tester.
Two very simple ~5V circuits:
1) Quick check — push the button, LED on = works.
2) Test Circuit as mentioned in the datasheet for frequency / pulse behavior test.
Nothing fancy, but handy for sorting out good vs questionable parts.
Blog:
https://togo-lab.io/?p=153Gitea:
https://gitea.togo-lab.io/tgohle/0002-PC817-Series-PhotoCoupler-Tester -
Alarm Panel Hack Defeats Encryption By Ignoring It - As frustrating as it may be for a company to lock you into its ecosystem by encryp... - https://hackaday.com/2024/01/19/alarm-panel-hack-defeats-encryption-by-ignoring-it/ #homeautomation #home-assistant #optocoupler #homehacks #hd44780 #matrix #esp32 #16x2 #lcd
-
Finally got around to editing video of my experiments in improving response times of slow low-cost #optocoupler #optoisolator ICs such as the #PC817
https://youtu.be/s1l86nTIWEE
The improved speed was sufficient to pass #MIDI data (31250 bits/s) through it -
Finally got around to editing video of my experiments in improving response times of slow low-cost #optocoupler #optoisolator ICs such as the #PC817
https://youtu.be/s1l86nTIWEE
The improved speed was sufficient to pass #MIDI data (31250 bits/s) through it -
Finally got around to editing video of my experiments in improving response times of slow low-cost #optocoupler #optoisolator ICs such as the #PC817
https://youtu.be/s1l86nTIWEE
The improved speed was sufficient to pass #MIDI data (31250 bits/s) through it -
Finally got around to editing video of my experiments in improving response times of slow low-cost #optocoupler #optoisolator ICs such as the #PC817
https://youtu.be/s1l86nTIWEE
The improved speed was sufficient to pass #MIDI data (31250 bits/s) through it -
Finally got around to editing video of my experiments in improving response times of slow low-cost #optocoupler #optoisolator ICs such as the #PC817
https://youtu.be/s1l86nTIWEE
The improved speed was sufficient to pass #MIDI data (31250 bits/s) through it -
@mike805
I tried the #cascode #amplifier trick with the PC817 #optocoupler. IMSAI Guy only showed how the voltage of the transistor base affects the speed of the falling edge. But notice how the rising edge remains largely unaffected.By comparison, the common mode NPN #transistor amplifier with 150 ohm resistor across base-emitter, yielded noticeably sharper rising/falling edges
#electronics #oscilloscope -
@mike805
I tried the #cascode #amplifier trick with the PC817 #optocoupler. IMSAI Guy only showed how the voltage of the transistor base affects the speed of the falling edge. But notice how the rising edge remains largely unaffected.By comparison, the common mode NPN #transistor amplifier with 150 ohm resistor across base-emitter, yielded noticeably sharper rising/falling edges
#electronics #oscilloscope -
@mike805
I tried the #cascode #amplifier trick with the PC817 #optocoupler. IMSAI Guy only showed how the voltage of the transistor base affects the speed of the falling edge. But notice how the rising edge remains largely unaffected.By comparison, the common mode NPN #transistor amplifier with 150 ohm resistor across base-emitter, yielded noticeably sharper rising/falling edges
#electronics #oscilloscope -
@mike805
I tried the #cascode #amplifier trick with the PC817 #optocoupler. IMSAI Guy only showed how the voltage of the transistor base affects the speed of the falling edge. But notice how the rising edge remains largely unaffected.By comparison, the common mode NPN #transistor amplifier with 150 ohm resistor across base-emitter, yielded noticeably sharper rising/falling edges
#electronics #oscilloscope -
@mike805
I tried the #cascode #amplifier trick with the PC817 #optocoupler. IMSAI Guy only showed how the voltage of the transistor base affects the speed of the falling edge. But notice how the rising edge remains largely unaffected.By comparison, the common mode NPN #transistor amplifier with 150 ohm resistor across base-emitter, yielded noticeably sharper rising/falling edges
#electronics #oscilloscope -
@mike805
[IMSAI Guy] explains the cascode amplifier trick
https://youtu.be/APUhm2tsCiESee Figure 13 High bandwidth optocoupler configuration
https://www.onsemi.com/pub/Collateral/AND8273-D.PDFI might need to try that for comparison
-
@mike805
[IMSAI Guy] explains the cascode amplifier trick
https://youtu.be/APUhm2tsCiESee Figure 13 High bandwidth optocoupler configuration
https://www.onsemi.com/pub/Collateral/AND8273-D.PDFI might need to try that for comparison
-
@mike805
[IMSAI Guy] explains the cascode amplifier trick
https://youtu.be/APUhm2tsCiESee Figure 13 High bandwidth optocoupler configuration
https://www.onsemi.com/pub/Collateral/AND8273-D.PDFI might need to try that for comparison
-
@mike805
[IMSAI Guy] explains the cascode amplifier trick
https://youtu.be/APUhm2tsCiESee Figure 13 High bandwidth optocoupler configuration
https://www.onsemi.com/pub/Collateral/AND8273-D.PDFI might need to try that for comparison
-
@mike805
[IMSAI Guy] explains the cascode amplifier trick
https://youtu.be/APUhm2tsCiESee Figure 13 High bandwidth optocoupler configuration
https://www.onsemi.com/pub/Collateral/AND8273-D.PDFI might need to try that for comparison
-
Testing the switching characteristics of cheapo PC817 optocouplers from Ebay.
555 timer astable is generating a 37kHz square wave test input.
Rise/fall time is way out of spec for use in #MIDI. But the recommended component, 6N138, is much more expensive.Instead have the #optocoupler drive the base of an NPN #transistor and by adding appropriate resistors, I get much improved switching speeds. Is this good enough for a MIDI input circuit? #electronics #oscilloscope #breadboard
-
How Home Made Robot Arms Used To Be Made - With laser cutters and 3D printers in our arsenal as well as the global toy shop o... - https://hackaday.com/2023/02/14/how-home-made-robot-arms-used-to-be-made/ #parallelport #robotshacks #optocoupler #robotarm
-
ESP32 Adds New Features To 1990s Home Alarm System - Given how fast technology is progressing, some consumer gadgets lend themselves to being replaced ev... - https://hackaday.com/2020/11/02/esp32-adds-new-features-to-1990s-home-alarm-system/ #classichacks #alarmsystem #optocoupler #homehacks #433mhz #alarm #esp32
-
Less Rock, More Roll: A MIDI Barrel Piano - Strolling around a park, pedestrian zone, or tourist area in any bigger city is rarely complete wi... more: https://hackaday.com/2020/06/18/less-rock-more-roll-a-midi-barrel-piano/ #midicontroller #musicalhacks #barrelorgan #optocoupler #midipiano #pianoroll #arduino #usbmidi #plexi #midi
-
An Optocoupler Doorbell Notifier - Over the years we’ve seen several attempts at adding Internet connectivity to the lowly wired doorbe... more: https://hackaday.com/2019/10/21/an-optocoupler-doorbell-notifier/ #3dprintedenclosure #homeautomation #optocoupler #homehacks #doorbell #particle #parts #xenon