#nozzle — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #nozzle, aggregated by home.social.
-
#Inkjet #cartridges suck and should be banned! Finally got some more paper for my #printer today but then the #cyan cartridge runs out of #ink, so I put in a new cartridge and guess what? The new one doesn’t work at all despite the printer saying the cartridge is full of ink. Like, I tried everything to fix it including reinserting the cartridge, doing the #nozzle check, cleaning the heads, performing a head realignment, restarting the printer, updating the #firmware, printing a cyan purge test page, none of that worked. The last two options I can think of are
1. Try using an official #Epson cartridge, since we’ve been using aftermarket cartridges for a while since the official ones are way #overpriced, but the aftermarket ones have been working fine up until now and if it doesn’t work, then that’s money on an #expensive Epson cartridge wasted.
Or
2. Just get rid of this #capitalist cartridge printer and buy a #tank one, because I’m done with printer companies locking us into #proprietary cartridges. I wanna be able to use whatever ink we buy without having crappy #DRM. Plus this printer is now 10 years old anyways, it’s lasted surprisingly long and has outlasted very other printer we had, but this problem as well as the constant need to realign the heads to stop lines from going through the ink are signs it’s time to upgrade to a tank printer.I hope one day the governments of the world ban inkjet cartridges, because they are horrible for the #environment and are just here to keep prices up.
Pics attached of the #nozzles in case anyone can see what’s gone wrong, but I highly doubt there is anything that can be seen.
-
#Inkjet #cartridges suck and should be banned! Finally got some more paper for my #printer today but then the #cyan cartridge runs out of #ink, so I put in a new cartridge and guess what? The new one doesn’t work at all despite the printer saying the cartridge is full of ink. Like, I tried everything to fix it including reinserting the cartridge, doing the #nozzle check, cleaning the heads, performing a head realignment, restarting the printer, updating the #firmware, printing a cyan purge test page, none of that worked. The last two options I can think of are
1. Try using an official #Epson cartridge, since we’ve been using aftermarket cartridges for a while since the official ones are way #overpriced, but the aftermarket ones have been working fine up until now and if it doesn’t work, then that’s money on an #expensive Epson cartridge wasted.
Or
2. Just get rid of this #capitalist cartridge printer and buy a #tank one, because I’m done with printer companies locking us into #proprietary cartridges. I wanna be able to use whatever ink we buy without having crappy #DRM. Plus this printer is now 10 years old anyways, it’s lasted surprisingly long and has outlasted very other printer we had, but this problem as well as the constant need to realign the heads to stop lines from going through the ink are signs it’s time to upgrade to a tank printer.I hope one day the governments of the world ban inkjet cartridges, because they are horrible for the #environment and are just here to keep prices up.
Pics attached of the #nozzles in case anyone can see what’s gone wrong, but I highly doubt there is anything that can be seen.
-
#Inkjet #cartridges suck and should be banned! Finally got some more paper for my #printer today but then the #cyan cartridge runs out of #ink, so I put in a new cartridge and guess what? The new one doesn’t work at all despite the printer saying the cartridge is full of ink. Like, I tried everything to fix it including reinserting the cartridge, doing the #nozzle check, cleaning the heads, performing a head realignment, restarting the printer, updating the #firmware, printing a cyan purge test page, none of that worked. The last two options I can think of are
1. Try using an official #Epson cartridge, since we’ve been using aftermarket cartridges for a while since the official ones are way #overpriced, but the aftermarket ones have been working fine up until now and if it doesn’t work, then that’s money on an #expensive Epson cartridge wasted.
Or
2. Just get rid of this #capitalist cartridge printer and buy a #tank one, because I’m done with printer companies locking us into #proprietary cartridges. I wanna be able to use whatever ink we buy without having crappy #DRM. Plus this printer is now 10 years old anyways, it’s lasted surprisingly long and has outlasted very other printer we had, but this problem as well as the constant need to realign the heads to stop lines from going through the ink are signs it’s time to upgrade to a tank printer.I hope one day the governments of the world ban inkjet cartridges, because they are horrible for the #environment and are just here to keep prices up.
Pics attached of the #nozzles in case anyone can see what’s gone wrong, but I highly doubt there is anything that can be seen.
-
#Inkjet #cartridges suck and should be banned! Finally got some more paper for my #printer today but then the #cyan cartridge runs out of #ink, so I put in a new cartridge and guess what? The new one doesn’t work at all despite the printer saying the cartridge is full of ink. Like, I tried everything to fix it including reinserting the cartridge, doing the #nozzle check, cleaning the heads, performing a head realignment, restarting the printer, updating the #firmware, printing a cyan purge test page, none of that worked. The last two options I can think of are
1. Try using an official #Epson cartridge, since we’ve been using aftermarket cartridges for a while since the official ones are way #overpriced, but the aftermarket ones have been working fine up until now and if it doesn’t work, then that’s money on an #expensive Epson cartridge wasted.
Or
2. Just get rid of this #capitalist cartridge printer and buy a #tank one, because I’m done with printer companies locking us into #proprietary cartridges. I wanna be able to use whatever ink we buy without having crappy #DRM. Plus this printer is now 10 years old anyways, it’s lasted surprisingly long and has outlasted very other printer we had, but this problem as well as the constant need to realign the heads to stop lines from going through the ink are signs it’s time to upgrade to a tank printer.I hope one day the governments of the world ban inkjet cartridges, because they are horrible for the #environment and are just here to keep prices up.
Pics attached of the #nozzles in case anyone can see what’s gone wrong, but I highly doubt there is anything that can be seen.
-
Jetterix Pressure Nozzle Claims Evaluated: The JetHose High-Pressure Garden Hose Nozzle https://www.allforgardening.com/1714062/jetterix-pressure-nozzle-claims-evaluated-the-jethose-high-pressure-garden-hose-nozzle/ #Claims #Evaluated: #garden #HighPressure #Hose #JetHose #Jetterix #nozzle #pressure #the
-
EFT Z80 heavy-payload agricultural drone🚁
The new spraying system with an 80L tank, new flexible pumps, and four high-power centrifugal nozzles...
delivering 36 L/min of atomized spray, stable powerful flow and thorough spray.
#eft #eftdrone #sprayingdrone #nozzle #z80 #agriculturedrone #uav #modernfarming #agricultureindustry #drones
https://www.effort-tech.com/en/z80 -
This is the internal design of the future E3D high speed nozzles, called the FUGE! Unlike the CHT ones, there is no more channelling. Instead, the filament core is warmed up by flattening its path while maintaining the same surface area throughout. This is the application of an E3D patent from 2020. ⤵️
#3dprinting #e3d #e3donline #patent #highspeed #nozzle #fuge @e3donline
-
E3D launched ObXiDian 500, a new wear resistant and non-stick technology for 3D printer nozzles that can withstand temperatures of up to 500°C. The fabrication process is impressive, read more about it on their blog!
-
There's no way... after all the repairs, I still cannot print anything larger than a few centimeters with my #creality #ender5 #3Dprinter... part of the #brim (and of the first layer as well) refuses to #stick to the #printbed. I can level the print bed and have the four angles at the right distance from the #nozzle (in fact the first extrusion sticks perfectly) but then the center is too low. I can place a little sheet of paper under the mat at the center of the print bed and then the center is ok, but some places around are lower... It's very #frustrating, and I really don't know what to do at this point... -
Printed Gas Can Accessories Make Refueling a Little Neater - No matter what your position is on internal combustion engines, it’s pretty safe t... - https://hackaday.com/2023/04/26/printed-gas-can-accessories-make-refueling-a-little-neater/ #internalcombustion #homehacks #gasoline #nozzle #ice