#sc126 — Public Fediverse posts

Exact 676 solder points later the #SC113 backplane as expansion for the #SC126 is fully populated. Next project is the small IO Card for another possible blinkenlight. But I'm afraid I don't have all the ics for it in the moment.
#RetroComputing #ZilogZ180

Exact 676 solder points later the #SC113 backplane as expansion for the #SC126 is fully populated. Next project is the small IO Card for another possible blinkenlight. But I'm afraid I don't have all the ics for it in the moment.
#RetroComputing #ZilogZ180

Exact 676 solder points later the #SC113 backplane as expansion for the #SC126 is fully populated. Next project is the small IO Card for another possible blinkenlight. But I'm afraid I don't have all the ics for it in the moment.
#RetroComputing #ZilogZ180

Exact 676 solder points later the #SC113 backplane as expansion for the #SC126 is fully populated. Next project is the small IO Card for another possible blinkenlight. But I'm afraid I don't have all the ics for it in the moment.
#RetroComputing #ZilogZ180

Exact 676 solder points later the #SC113 backplane as expansion for the #SC126 is fully populated. Next project is the small IO Card for another possible blinkenlight. But I'm afraid I don't have all the ics for it in the moment.
#RetroComputing #ZilogZ180

The little #CPM #workstation is finished. My evening work consisted of packing it in a nice case and starting the backplane soldering. But there are still plenty of soldering points left, I'll have to do that tomorrow as well.

Do any of you #Pascal nerds knows a source for porting #Eliza to #TurboPascal3, the first good Turing test in #BASIC?
#RetroComputing #ZilogZ180 #SC126

The little #CPM #workstation is finished. My evening work consisted of packing it in a nice case and starting the backplane soldering. But there are still plenty of soldering points left, I'll have to do that tomorrow as well.

Do any of you #Pascal nerds knows a source for porting #Eliza to #TurboPascal3, the first good Turing test in #BASIC?
#RetroComputing #ZilogZ180 #SC126

The little #CPM #workstation is finished. My evening work consisted of packing it in a nice case and starting the backplane soldering. But there are still plenty of soldering points left, I'll have to do that tomorrow as well.

Do any of you #Pascal nerds knows a source for porting #Eliza to #TurboPascal3, the first good Turing test in #BASIC?
#RetroComputing #ZilogZ180 #SC126

The little #CPM #workstation is finished. My evening work consisted of packing it in a nice case and starting the backplane soldering. But there are still plenty of soldering points left, I'll have to do that tomorrow as well.

Do any of you #Pascal nerds knows a source for porting #Eliza to #TurboPascal3, the first good Turing test in #BASIC?
#RetroComputing #ZilogZ180 #SC126

The little #CPM #workstation is finished. My evening work consisted of packing it in a nice case and starting the backplane soldering. But there are still plenty of soldering points left, I'll have to do that tomorrow as well.

Do any of you #Pascal nerds knows a source for porting #Eliza to #TurboPascal3, the first good Turing test in #BASIC?
#RetroComputing #ZilogZ180 #SC126

But after a complete full compile of the whole directory the switching to turbo mode works now.
So, at least I've been able to address one of the two outstanding issues today. Tomorrow I'll be back at the museum to see if I can convince the move-it software to transfer a file using an old 486 and a real serial port.
#RetroComputing #KneisnerM100 #ZilogZ180 #SC126

But after a complete full compile of the whole directory the switching to turbo mode works now.
So, at least I've been able to address one of the two outstanding issues today. Tomorrow I'll be back at the museum to see if I can convince the move-it software to transfer a file using an old 486 and a real serial port.
#RetroComputing #KneisnerM100 #ZilogZ180 #SC126

But after a complete full compile of the whole directory the switching to turbo mode works now.
So, at least I've been able to address one of the two outstanding issues today. Tomorrow I'll be back at the museum to see if I can convince the move-it software to transfer a file using an old 486 and a real serial port.
#RetroComputing #KneisnerM100 #ZilogZ180 #SC126

But after a complete full compile of the whole directory the switching to turbo mode works now.
So, at least I've been able to address one of the two outstanding issues today. Tomorrow I'll be back at the museum to see if I can convince the move-it software to transfer a file using an old 486 and a real serial port.
#RetroComputing #KneisnerM100 #ZilogZ180 #SC126

But after a complete full compile of the whole directory the switching to turbo mode works now.
So, at least I've been able to address one of the two outstanding issues today. Tomorrow I'll be back at the museum to see if I can convince the move-it software to transfer a file using an old 486 and a real serial port.
#RetroComputing #KneisnerM100 #ZilogZ180 #SC126

Making my first experiences with FDISK80 and FAT command for talking to the normal partition behind the slices area of the SD-Card. Have to look up how to create a kind of autoexec.bat to handle the different ASSIGNs for best usage.
And btw the #SC126 resists all attempts to double the clock speed of the cpu to ~36MHz :(
#RetroComputing #CPM22 #RomWBW.

Configuration of the #SC126 overclocking (*2) failed with CPUSPDCAP + CPUSPDDEF. But made my first own #RomWBW.
And tried my first small #TurboPascal program and programmed the LED port with blinkenlights 😀
#RetroComputing #ZilogZ180

Configuration of the #SC126 overclocking (*2) failed with CPUSPDCAP + CPUSPDDEF. But made my first own #RomWBW.
And tried my first small #TurboPascal program and programmed the LED port with blinkenlights 😀
#RetroComputing #ZilogZ180

Configuration of the #SC126 overclocking (*2) failed with CPUSPDCAP + CPUSPDDEF. But made my first own #RomWBW.
And tried my first small #TurboPascal program and programmed the LED port with blinkenlights 😀
#RetroComputing #ZilogZ180

Configuration of the #SC126 overclocking (*2) failed with CPUSPDCAP + CPUSPDDEF. But made my first own #RomWBW.
And tried my first small #TurboPascal program and programmed the LED port with blinkenlights 😀
#RetroComputing #ZilogZ180

Configuration of the #SC126 overclocking (*2) failed with CPUSPDCAP + CPUSPDDEF. But made my first own #RomWBW.
And tried my first small #TurboPascal program and programmed the LED port with blinkenlights 😀
#RetroComputing #ZilogZ180

After waiting a few days to get all parts the #SC126 with #RC2014 bus is running out of the box. Has to remember the DCD0 jumper, without RomWBW does not start to prompt. Next steps are the addition of SD-card for filesystem and look for a source how to "overdrive" the processor ;)
#RetroComputing #ZilogZ180

After waiting a few days to get all parts the #SC126 with #RC2014 bus is running out of the box. Has to remember the DCD0 jumper, without RomWBW does not start to prompt. Next steps are the addition of SD-card for filesystem and look for a source how to "overdrive" the processor ;)
#RetroComputing #ZilogZ180

After waiting a few days to get all parts the #SC126 with #RC2014 bus is running out of the box. Has to remember the DCD0 jumper, without RomWBW does not start to prompt. Next steps are the addition of SD-card for filesystem and look for a source how to "overdrive" the processor ;)
#RetroComputing #ZilogZ180

After waiting a few days to get all parts the #SC126 with #RC2014 bus is running out of the box. Has to remember the DCD0 jumper, without RomWBW does not start to prompt. Next steps are the addition of SD-card for filesystem and look for a source how to "overdrive" the processor ;)
#RetroComputing #ZilogZ180

After waiting a few days to get all parts the #SC126 with #RC2014 bus is running out of the box. Has to remember the DCD0 jumper, without RomWBW does not start to prompt. Next steps are the addition of SD-card for filesystem and look for a source how to "overdrive" the processor ;)
#RetroComputing #ZilogZ180

Because of the all in one design I decided to build another #RC2014 hardware. I choose a #SC126 mainboard, which I ordered yesterday. The support for it's onboard hardware seems to be more complete in #RomWBW. And with a case it will be a nice 'full workstation'
#RetroComputing #ZilogZ180 #Tinkering

Because of the all in one design I decided to build another #RC2014 hardware. I choose a #SC126 mainboard, which I ordered yesterday. The support for it's onboard hardware seems to be more complete in #RomWBW. And with a case it will be a nice 'full workstation'
#RetroComputing #ZilogZ180 #Tinkering

Because of the all in one design I decided to build another #RC2014 hardware. I choose a #SC126 mainboard, which I ordered yesterday. The support for it's onboard hardware seems to be more complete in #RomWBW. And with a case it will be a nice 'full workstation'
#RetroComputing #ZilogZ180 #Tinkering

Because of the all in one design I decided to build another #RC2014 hardware. I choose a #SC126 mainboard, which I ordered yesterday. The support for it's onboard hardware seems to be more complete in #RomWBW. And with a case it will be a nice 'full workstation'
#RetroComputing #ZilogZ180 #Tinkering

Because of the all in one design I decided to build another #RC2014 hardware. I choose a #SC126 mainboard, which I ordered yesterday. The support for it's onboard hardware seems to be more complete in #RomWBW. And with a case it will be a nice 'full workstation'
#RetroComputing #ZilogZ180 #Tinkering