#qtrvsim — Public Fediverse posts

The #cvut #cvutfel OTREES booth at InstallFest 2026 #InstallFest There are #Linux and #NuttX running on x86 PC, RISC-V and ARM. The #QtRvSim simulator is running on x86 and RISC-V Milk-V Pioneer. We have there APO course students semester projects running on MZ_APO. #pysimCoder on the screen as well. The NuttX introductory workshop has been visited by many people. All STM32L476RG based NUCLEO-L476RG kit graciously provided by STM and ETC - Embedded Technology Club.

The #cvut #cvutfel OTREES booth at InstallFest 2026 #InstallFest There are #Linux and #NuttX running on x86 PC, RISC-V and ARM. The #QtRvSim simulator is running on x86 and RISC-V Milk-V Pioneer. We have there APO course students semester projects running on MZ_APO. #pysimCoder on the screen as well. The NuttX introductory workshop has been visited by many people. All STM32L476RG based NUCLEO-L476RG kit graciously provided by STM and ETC - Embedded Technology Club.

If you have interest in basic or more advanced computer architectures learning and teaching then I plan to visit #RISCV #FOSDEM devroom this Satturday. We can discuss even use of our #QtRvSim in the teaching. We are working on Sv32 and latter even Sv39 addition to extend this tool even for teaching operating system basic concepts. Tenative goal is to run MIT-PDOS one day. We have new #QtRvSim manual at our #CompArch site as well and revamped online training site (thanks to Jakub Pelc https://swpelc.eu/).

#CVUTFEL ( #CVUT FEE) Advanced Computer Architecture ( #comparch) course recodings of the first five lectures are published at #VHSky.cz. Czech language recordings from the 2021 round are available as well. The B4M35PAP course builds on the knowledge from the introductory #comparch B35APO course (recordings). Each student builds their own CPU design (tools and ISA are open). The #QtRvSim #RISCV educational simulator is provided for inspiration (online version and The Czech Technical University #comparch related courses guidepost https://comparch.edu.cvut.cz/).

P.S.: Help with tooling for transcribing the lectures in my Czenglish dialect into English subtitles would be appreciated, as well as all other forms of feedback. For the introductory course, we provide reusable LaTeX sources (CC-BY-SA license) that are open to pull requests.

#CVUTFEL ( #CVUT FEE) Advanced Computer Architecture ( #comparch) course recodings of the first five lectures are published at #VHSky.cz. Czech language recordings from the 2021 round are available as well. The B4M35PAP course builds on the knowledge from the introductory #comparch B35APO course (recordings). Each student builds their own CPU design (tools and ISA are open). The #QtRvSim #RISCV educational simulator is provided for inspiration (online version and The Czech Technical University #comparch related courses guidepost https://comparch.edu.cvut.cz/).

P.S.: Help with tooling for transcribing the lectures in my Czenglish dialect into English subtitles would be appreciated, as well as all other forms of feedback. For the introductory course, we provide reusable LaTeX sources (CC-BY-SA license) that are open to pull requests.

#CVUTFEL ( #CVUT FEE) Advanced Computer Architecture ( #comparch) course recodings of the first five lectures are published at #VHSky.cz. Czech language recordings from the 2021 round are available as well. The B4M35PAP course builds on the knowledge from the introductory #comparch B35APO course (recordings). Each student builds their own CPU design (tools and ISA are open). The #QtRvSim #RISCV educational simulator is provided for inspiration (online version and The Czech Technical University #comparch related courses guidepost https://comparch.edu.cvut.cz/).

P.S.: Help with tooling for transcribing the lectures in my Czenglish dialect into English subtitles would be appreciated, as well as all other forms of feedback. For the introductory course, we provide reusable LaTeX sources (CC-BY-SA license) that are open to pull requests.

#CVUTFEL ( #CVUT FEE) Advanced Computer Architecture ( #comparch) course recodings of the first five lectures are published at #VHSky.cz. Czech language recordings from the 2021 round are available as well. The B4M35PAP course builds on the knowledge from the introductory #comparch B35APO course (recordings). Each student builds their own CPU design (tools and ISA are open). The #QtRvSim #RISCV educational simulator is provided for inspiration (online version and The Czech Technical University #comparch related courses guidepost https://comparch.edu.cvut.cz/).

P.S.: Help with tooling for transcribing the lectures in my Czenglish dialect into English subtitles would be appreciated, as well as all other forms of feedback. For the introductory course, we provide reusable LaTeX sources (CC-BY-SA license) that are open to pull requests.

#CVUTFEL ( #CVUT FEE) Advanced Computer Architecture ( #comparch) course recodings of the first five lectures are published at #VHSky.cz. Czech language recordings from the 2021 round are available as well. The B4M35PAP course builds on the knowledge from the introductory #comparch B35APO course (recordings). Each student builds their own CPU design (tools and ISA are open). The #QtRvSim #RISCV educational simulator is provided for inspiration (online version and The Czech Technical University #comparch related courses guidepost https://comparch.edu.cvut.cz/).

P.S.: Help with tooling for transcribing the lectures in my Czenglish dialect into English subtitles would be appreciated, as well as all other forms of feedback. For the introductory course, we provide reusable LaTeX sources (CC-BY-SA license) that are open to pull requests.

OTREES #cvut booth at #LinuxDays 2025 presenting our CAN/CAN FD projects for #Linux, #NuttX, #FPGA and #RTEMS. SaMoCon motion control platform driven by pysimCoder rapid prototyping solution for #NuttX with online monitoring and parameters tuning and update uploads through silicon-heaven and NXboot integrated in the frame of Štěpán Pressl’s #GSoC 2025 (will be presented in detail on NuttX Workshop October 16 and 17). More on the booth: #Espressif based kits running NuttX (ICE-V Wireless, see our PMSM project, #ESP32C6 with M-bot platform), AMD/Xilinx Zynq MZ_APO running Linux and #RTEMS, PolarFire SoC, Milk-V Pioneer 64 core 64-bit #RISCV system running #QtRvSim (for CompArch education), #CHROMuLAN data acquisition over uLAN driver, LX_RoCoN system used for ESA projects and lot more to see at our booth.

OTREES #cvut booth at #LinuxDays 2025 presenting our CAN/CAN FD projects for #Linux, #NuttX, #FPGA and #RTEMS. SaMoCon motion control platform driven by pysimCoder rapid prototyping solution for #NuttX with online monitoring and parameters tuning and update uploads through silicon-heaven and NXboot integrated in the frame of Štěpán Pressl’s #GSoC 2025 (will be presented in detail on NuttX Workshop October 16 and 17). More on the booth: #Espressif based kits running NuttX (ICE-V Wireless, see our PMSM project, #ESP32C6 with M-bot platform), AMD/Xilinx Zynq MZ_APO running Linux and #RTEMS, PolarFire SoC, Milk-V Pioneer 64 core 64-bit #RISCV system running #QtRvSim (for CompArch education), #CHROMuLAN data acquisition over uLAN driver, LX_RoCoN system used for ESA projects and lot more to see at our booth.

OTREES #cvut booth at #LinuxDays 2025 presenting our CAN/CAN FD projects for #Linux, #NuttX, #FPGA and #RTEMS. SaMoCon motion control platform driven by pysimCoder rapid prototyping solution for #NuttX with online monitoring and parameters tuning and update uploads through silicon-heaven and NXboot integrated in the frame of Štěpán Pressl’s #GSoC 2025 (will be presented in detail on NuttX Workshop October 16 and 17). More on the booth: #Espressif based kits running NuttX (ICE-V Wireless, see our PMSM project, #ESP32C6 with M-bot platform), AMD/Xilinx Zynq MZ_APO running Linux and #RTEMS, PolarFire SoC, Milk-V Pioneer 64 core 64-bit #RISCV system running #QtRvSim (for CompArch education), #CHROMuLAN data acquisition over uLAN driver, LX_RoCoN system used for ESA projects and lot more to see at our booth.

OTREES #cvut booth at #LinuxDays 2025 presenting our CAN/CAN FD projects for #Linux, #NuttX, #FPGA and #RTEMS. SaMoCon motion control platform driven by pysimCoder rapid prototyping solution for #NuttX with online monitoring and parameters tuning and update uploads through silicon-heaven and NXboot integrated in the frame of Štěpán Pressl’s #GSoC 2025 (will be presented in detail on NuttX Workshop October 16 and 17). More on the booth: #Espressif based kits running NuttX (ICE-V Wireless, see our PMSM project, #ESP32C6 with M-bot platform), AMD/Xilinx Zynq MZ_APO running Linux and #RTEMS, PolarFire SoC, Milk-V Pioneer 64 core 64-bit #RISCV system running #QtRvSim (for CompArch education), #CHROMuLAN data acquisition over uLAN driver, LX_RoCoN system used for ESA projects and lot more to see at our booth.

OTREES #cvut booth at #LinuxDays 2025 presenting our CAN/CAN FD projects for #Linux, #NuttX, #FPGA and #RTEMS. SaMoCon motion control platform driven by pysimCoder rapid prototyping solution for #NuttX with online monitoring and parameters tuning and update uploads through silicon-heaven and NXboot integrated in the frame of Štěpán Pressl’s #GSoC 2025 (will be presented in detail on NuttX Workshop October 16 and 17). More on the booth: #Espressif based kits running NuttX (ICE-V Wireless, see our PMSM project, #ESP32C6 with M-bot platform), AMD/Xilinx Zynq MZ_APO running Linux and #RTEMS, PolarFire SoC, Milk-V Pioneer 64 core 64-bit #RISCV system running #QtRvSim (for CompArch education), #CHROMuLAN data acquisition over uLAN driver, LX_RoCoN system used for ESA projects and lot more to see at our booth.

Summer 2025 #cvut defended theses by OTREES/my students:

• Matyáš Bobek, FlexCAN Controller Emulation for QEMU, #qemu #canbus (git), I hope for mainlining soon, my thanks to
  @marckleinebudde for review
• Albert Bezděk, Stereo Camera FPGA Interface and Processing for Zynq Based Systems, with initial rectification and disparity in #XilinX #Zynq #FPGA (git), thank to Martin Meloun for review
• Michal Matiáš, NuttX RTOS Driver for Single Unshielded Twisted Pair Communication, working with ncv7410 and ESP32-C6 for now (nuttx, apps git), continues by #GSoC expected to lead to broader OpenAlliance SPI Ethernet MAC-PHY T1S for mainline #NuttX support after summer, thanks to @cynerd for review

See the last OTREES theses list for link to repositories and more

Another related theses from #cvut Faculty of Information Technologies mentored by Michal Štepanovský to mention:

• Jan Medek, Implementation of RISC-V soft-core processor on FPGA board with real-time operating system support, port (git) of #NuttX to the own setup of Ibex #riscv to Digilent Basys 3 and Digilent Nexys Video, includes even #NuttX, #RTEMS, #Zephyr, #FreeRTOS and RT-Thread choice analysis, some minor clarifications in my review, out of the text documentation, the student ported NuttX even to the CPU system prepared in frame of the next thesis
• Ondřej Golasowski, RISC-V open-source microarchitecture analysis and optimization, the VESP-BETA single-cycle RV32IMZicsr #riscv design for basic #comparch education with #FPGA labs

Stay tuned next summer as well, there is student interesting in thesis to add MMU to #QtRvSim

Summer 2025 #cvut defended theses by OTREES / “my” students:

• Matyáš Bobek, FlexCAN Controller Emulation for QEMU, #qemu #canbus (git), I hope for mainlining soon, my thanks to
  @marckleinebudde for review
• Albert Bezděk, Stereo Camera FPGA Interface and Processing for Zynq Based Systems, with initial rectification and disparity in #XilinX #Zynq #FPGA (git), thank to Martin Meloun for review
• Michal Matiáš, NuttX RTOS Driver for Single Unshielded Twisted Pair Communication, working with ncv7410 and ESP32-C6 for now (nuttx, apps git), continues by #GSoC expected to lead to broader OpenAlliance SPI Ethernet MAC-PHY T1S for mainline #NuttX support after summer, thanks to @cynerd for review

See the last OTREES theses list for link to repositories and more

Another related theses from #cvut Faculty of Information Technologies mentored by Michal Štepanovský to mention:

• Jan Medek, Implementation of RISC-V soft-core processor on FPGA board with real-time operating system support, port (git) of #NuttX to the own setup of Ibex #riscv to Digilent Basys 3 and Digilent Nexys Video, includes even #NuttX, #RTEMS, #Zephyr, #FreeRTOS and RT-Thread choice analysis, some minor clarifications in my review, out of the text documentation, the student ported NuttX even to the CPU system prepared in frame of the next thesis
• Ondřej Golasowski, RISC-V open-source microarchitecture analysis and optimization, the VESP-BETA single-cycle RV32IMZicsr #riscv design for basic #comparch education with #FPGA labs

Stay tuned next summer as well, there is student interested in thesis to add MMU to #QtRvSim

Summer 2025 #cvut defended theses by OTREES / “my” students:

• Matyáš Bobek, FlexCAN Controller Emulation for QEMU, #qemu #canbus (git), I hope for mainlining soon, my thanks to
  @marckleinebudde for review
• Albert Bezděk, Stereo Camera FPGA Interface and Processing for Zynq Based Systems, with initial rectification and disparity in #XilinX #Zynq #FPGA (git), thank to Martin Meloun for review
• Michal Matiáš, NuttX RTOS Driver for Single Unshielded Twisted Pair Communication, working with ncv7410 and ESP32-C6 for now (nuttx, apps git), continues by #GSoC expected to lead to broader OpenAlliance SPI Ethernet MAC-PHY T1S for mainline #NuttX support after summer, thanks to @cynerd for review

See the last OTREES theses list for link to repositories and more

Another related theses from #cvut Faculty of Information Technologies mentored by Michal Štepanovský to mention:

• Jan Medek, Implementation of RISC-V soft-core processor on FPGA board with real-time operating system support, port (git) of #NuttX to the own setup of Ibex #riscv to Digilent Basys 3 and Digilent Nexys Video, includes even #NuttX, #RTEMS, #Zephyr, #FreeRTOS and RT-Thread choice analysis, some minor clarifications in my review, out of the text documentation, the student ported NuttX even to the CPU system prepared in frame of the next thesis
• Ondřej Golasowski, RISC-V open-source microarchitecture analysis and optimization, the VESP-BETA single-cycle RV32IMZicsr #riscv design for basic #comparch education with #FPGA labs

Stay tuned next summer as well, there is student interested in thesis to add MMU to #QtRvSim

Summer 2025 #cvut defended theses by OTREES / “my” students:

• Matyáš Bobek, FlexCAN Controller Emulation for QEMU, #qemu #canbus (git), I hope for mainlining soon, my thanks to
  @marckleinebudde for review
• Albert Bezděk, Stereo Camera FPGA Interface and Processing for Zynq Based Systems, with initial rectification and disparity in #XilinX #Zynq #FPGA (git), thank to Martin Meloun for review
• Michal Matiáš, NuttX RTOS Driver for Single Unshielded Twisted Pair Communication, working with ncv7410 and ESP32-C6 for now (nuttx, apps git), continues by #GSoC expected to lead to broader OpenAlliance SPI Ethernet MAC-PHY T1S for mainline #NuttX support after summer, thanks to @cynerd for review

See the last OTREES theses list for link to repositories and more

Another related theses from #cvut Faculty of Information Technologies mentored by Michal Štepanovský to mention:

• Jan Medek, Implementation of RISC-V soft-core processor on FPGA board with real-time operating system support, port (git) of #NuttX to the own setup of Ibex #riscv to Digilent Basys 3 and Digilent Nexys Video, includes even #NuttX, #RTEMS, #Zephyr, #FreeRTOS and RT-Thread choice analysis, some minor clarifications in my review, out of the text documentation, the student ported NuttX even to the CPU system prepared in frame of the next thesis
• Ondřej Golasowski, RISC-V open-source microarchitecture analysis and optimization, the VESP-BETA single-cycle RV32IMZicsr #riscv design for basic #comparch education with #FPGA labs

Stay tuned next summer as well, there is student interesting in thesis to add MMU to #QtRvSim

Summer 2025 #cvut defended theses by OTREES/my students:

• Matyáš Bobek, FlexCAN Controller Emulation for QEMU, #qemu #canbus (git), I hope for mainlining soon, my thanks to
  @marckleinebudde for review
• Albert Bezděk, Stereo Camera FPGA Interface and Processing for Zynq Based Systems, with initial rectification and disparity in #XilinX #Zynq #FPGA (git), thank to Martin Meloun for review
• Michal Matiáš, NuttX RTOS Driver for Single Unshielded Twisted Pair Communication, working with ncv7410 and ESP32-C6 for now (nuttx, apps git), continues by #GSoC expected to lead to broader OpenAlliance SPI Ethernet MAC-PHY T1S for mainline #NuttX support after summer, thanks to @cynerd for review

See the last OTREES theses list for link to repositories and more

Another related theses from #cvut Faculty of Information Technologies mentored by Michal Štepanovský to mention:

• Jan Medek, Implementation of RISC-V soft-core processor on FPGA board with real-time operating system support, port (git) of #NuttX to the own setup of Ibex #riscv to Digilent Basys 3 and Digilent Nexys Video, includes even #NuttX, #RTEMS, #Zephyr, #FreeRTOS and RT-Thread choice analysis, some minor clarifications in my review, out of the text documentation, the student ported NuttX even to the CPU system prepared in frame of the next thesis
• Ondřej Golasowski, RISC-V open-source microarchitecture analysis and optimization, the VESP-BETA single-cycle RV32IMZicsr #riscv design for basic #comparch education with #FPGA labs

Stay tuned next summer as well, there is student interesting in thesis to add MMU to #QtRvSim

If you want to learn #RiscV basic principles yourself or use it in your computer architectures #comparch basic classes, then you can use our really open and fully shared resources, no registration required for experimenting online https://comparch.edu.cvut.cz/, downloading #QtRvSim packages for all major desktop operating systems #linux, #macos, #mswidows and obtaining lectures with the sources https://cw.fel.cvut.cz/wiki/courses/b35apo/en/lectures/start and recordings on YouTube and even advertisement-free community PeerTube instance VHSky.cz. We offer even online training and and competition site https://comparch.edu.cvut.cz/online-tools/webeval/. In this case, we store SHA1 of your e-mail only for purpose to allow participants to reset their password. So again we do not intend and even cannot use your registration for advertisement for paid courses etc.

The B35APO Computer Architectures course based on #riscv and our #qtrvsim simulator reached new (re)usability level, updated slides in the LaTeX Beamer format for lecture 1 to 10 are translated to English, PDF, CC-BY-SA Slide Sources at #cvut FEE GitLab and on GitHub. The feedback, corrections, suggestion, reuse and cooperation are welcomed. The lectures recording are available on community driven PeerTube server https://vhsky.cz/w/p/8Ejstt3Tfh8mWGcjQcEL2S and CTU FEE B35APO YouTube List. The online site with links to more related courses and on-line QtRvSim WASM application https://comparch.edu.cvut.cz/ allows even online evaluation of simple #riscv assembly and C exercises.