home.social

#makerspace — Public Fediverse posts

Live and recent posts from across the Fediverse tagged #makerspace, aggregated by home.social.

fetched live
  1. 🍕🍅 From the garden to the pizza oven at TOG!

    There was plenty of homemade pizza at last night’s TOG Open Social.
    Even better, the tomato sauce was made using tomatoes grown in one of our members’ gardens — so we went from home-grown tomatoes, to homemade sauce, to pizzas cooked in the TOG pizza oven. 🔥

    Making comes in many forms, and some of them are particularly tasty.

    Thanks to everyone who came along, cooked and shared the evening with us.

    #TOGHackerspace #Hackerspace #Makerspace #Dublin

  2. 🍕🍅 From the garden to the pizza oven at TOG!

    There was plenty of homemade pizza at last night’s TOG Open Social.
    Even better, the tomato sauce was made using tomatoes grown in one of our members’ gardens — so we went from home-grown tomatoes, to homemade sauce, to pizzas cooked in the TOG pizza oven. 🔥

    Making comes in many forms, and some of them are particularly tasty.

    Thanks to everyone who came along, cooked and shared the evening with us.

    #TOGHackerspace #Hackerspace #Makerspace #Dublin

  3. As mentioned in previous posts, our Munich Maker Lab logo often serves as a test for different production methods, from 3D printing to screen printing and embroidery, but this one was not on our bingo card: the Munich Maker Lab logo as a tufted rug.

    #hackerspace #makerspace #openworkshop #MunichMakerLab #MuMaLab #Kreativquartier #Kreativlabor #DIYMunich

  4. As mentioned in previous posts, our Munich Maker Lab logo often serves as a test for different production methods, from 3D printing to screen printing and embroidery, but this one was not on our bingo card: the Munich Maker Lab logo as a tufted rug.

    #hackerspace #makerspace #openworkshop #MunichMakerLab #MuMaLab #Kreativquartier #Kreativlabor #DIYMunich

  5. Kennt jemand eine günstige Möglichkeit, kleine und weniger Werkstücke aus 1-2mm Stahlblech CNC-gesteuert schneiden zu lassen (Laser, Wasser, Fräse, whatever)? Bonuspunkte, wenn die Teile nicht um die halbe Welt geschifft werden müssen. #Heimwerken #Fabrication #Makerspace

  6. Kennt jemand eine günstige Möglichkeit, kleine und weniger Werkstücke aus 1-2mm Stahlblech CNC-gesteuert schneiden zu lassen (Laser, Wasser, Fräse, whatever)? Bonuspunkte, wenn die Teile nicht um die halbe Welt geschifft werden müssen. #Heimwerken #Fabrication #Makerspace

  7. Makerspace Gütersloh Repair Café

    Stadtbibliothek Gütersloh, Samstag, 15. August um 11:00 MESZ

    »GehT noch! – Reparieren statt wegwerfen«

    Wir unterstützen Dich dabei, defekte Gegenstände zu untersuchen und zu reparieren oder Linux zu installieren. Dadurch setzen wir ein Zeichen gegen die Wegwerfgesellschaft und für einen schonenden Umgang mit Ressourcen.

    Reparatur anmelden Schreib eine Mail ([email protected]) oder hinterlasse eine Nachricht auf dem Anrufbeantworter (05241-2249910).

    Mitmachen Schreib eine Mail ([email protected]), komm einfach vorbei oder trag Dich in die Helfer*innenliste (repaircafe.makerspace-gt.de) ein.

    calndr.de/event/makerspace-gut

  8. 🎉 Part-DB 2.15 was released - It introduces stricter database validations for SQLite and a #OAuth Server capabilities, so that applications using #API and #MCP clients can quickly authenticate with your Part-DB instance without requiring users to generate API tokens manually.

    See full release notes on #github: github.com/Part-DB/Part-DB-ser

    #opensource #electronics #makerspace #maker #hackerspace #selfhosted

  9. 🎉 Part-DB 2.15 was released - It introduces stricter database validations for SQLite and a #OAuth Server capabilities, so that applications using #API and #MCP clients can quickly authenticate with your Part-DB instance without requiring users to generate API tokens manually.

    See full release notes on #github: github.com/Part-DB/Part-DB-ser

    #opensource #electronics #makerspace #maker #hackerspace #selfhosted

  10. LapBoard

    This project turns a laptop keyboard into a USB keyboard for other devices. It is handy when setting up a Raspberry Pi if you cannot find a spare keyboard or are simply too lazy to get one.

    class.academany.org/futures/cy

    Made by Hanndoddi during Fab Futures, which teaches 21st century vocational skills. It is a part of The Academany, the fab lab network's distributed hands-on educational program.

    futures.academany.org/

    #rp2040 #fablab #makerspace #electronics #fabacademy #FabFutures

  11. LapBoard

    This project turns a laptop keyboard into a USB keyboard for other devices. It is handy when setting up a Raspberry Pi if you cannot find a spare keyboard or are simply too lazy to get one.

    class.academany.org/futures/cy

    Made by Hanndoddi during Fab Futures, which teaches 21st century vocational skills. It is a part of The Academany, the fab lab network's distributed hands-on educational program.

    futures.academany.org/

    #rp2040 #fablab #makerspace #electronics #fabacademy #FabFutures

  12. We have a Makerspace for students to use. Build your technical experience and have fun creating things. The room contains: 2x 3D printers, a vinyl cutter, a badge maker, a programmable embroidery machine, tools, fabric, filament, breadboards, electronic components and more. #MakerSpace

  13. We have a Makerspace for students to use. Build your technical experience and have fun creating things. The room contains: 2x 3D printers, a vinyl cutter, a badge maker, a programmable embroidery machine, tools, fabric, filament, breadboards, electronic components and more. #MakerSpace

  14. Little one found the parts we salvaged from old electronics yesterday at the #makerspace. This part is from an old equalizer. The chip says it's a "LM3915N" and after reading through the datasheet I was pretty sure we'd have everything we need on it's PCB to try it out. It can drive 10 LED and light em up in a row depending on a reference voltage. Kinda neat, huh?

    Little one was delighted, of course.

  15. Little one found the parts we salvaged from old electronics yesterday at the #makerspace. This part is from an old equalizer. The chip says it's a "LM3915N" and after reading through the datasheet I was pretty sure we'd have everything we need on it's PCB to try it out. It can drive 10 LED and light em up in a row depending on a reference voltage. Kinda neat, huh?

    Little one was delighted, of course.

  16. As part of our electronics workshop, participants can turn leftover electronic components into creative tiny creatures. This little wizard even got a staff with a working lantern.

    #hackerspace #makerspace #openworkshop #MunichMakerLab #MuMaLab #Kreativquartier #Kreativlabor #DIYMunich #electronics #soldering #upcycling

  17. As part of our electronics workshop, participants can turn leftover electronic components into creative tiny creatures. This little wizard even got a staff with a working lantern.

    #hackerspace #makerspace #openworkshop #MunichMakerLab #MuMaLab #Kreativquartier #Kreativlabor #DIYMunich #electronics #soldering #upcycling

  18. Some impressions from our last hands-on soldering workshop.

    We do not run this workshop regularly, but a new date is planned for fall, including some special Halloween soldering kits. Stay tuned for updates.

    #hackerspace #makerspace #openworkshop #MunichMakerLab #MuMaLab #Kreativquartier #Kreativlabor #DIYMunich #soldering #workshop #halloween

  19. Some impressions from our last hands-on soldering workshop.

    We do not run this workshop regularly, but a new date is planned for fall, including some special Halloween soldering kits. Stay tuned for updates.

    #hackerspace #makerspace #openworkshop #MunichMakerLab #MuMaLab #Kreativquartier #Kreativlabor #DIYMunich #soldering #workshop #halloween

  20. #TorontoON - #Site3CoLaboratory

    " #Site3 #CoLaboratory is a volunteer run #MakerSpace in #Toronto’s west end, at Ossington and Bloor.

    The shop is 2000 square feet and is fully equipped with #woodworking tools, #metalworking tools, #3DPrinters, electronics and more! See our 'Tools & Materials' page for more info and a complete tool list.

    The vision for our organization is to provide an inclusive space that promotes a four step cycle of create, display, teach and inspire.

    - Build and maintain an inspiring space and community that provides members with access to the right tools and knowledge to create anything they can think of.
    - Display, promote, and support member made projects.
    - Teach new #skills through regular events, #workshops, and #classes.
    - Inspire communities to bring their projects to life with our #CollectiveKnowledge, tools, and support.
    - Interested in learning more? Come by Site 3 for a tour any Thursday between 7-10pm!

    Membership

    Site 3 is 100% volunteer run and is a registered Ontario non-profit organization. We are a community of makers, artists, inventors, tinkerers, learners, teachers, and much more. If this sounds like your kind of thing, maybe you should join us?

    Membership Levels

    The membership structure consists of three levels. All three membership levels pay the same monthly dues of $60 plus #HST with different privileges for each membership level. We have a minimum 2 month membership period meaning your first and last month’s membership fees will be charged upon signup ($120 plus HST). Storage lockers are available at an additional monthly fee."

    FMI:
    site3.ca/

    #SolarPunkSunday #Ontario #CoLaboratory #MakerSpace #ToolLibrary #VolunteerHours #BuildingCommunity #Makers #DIY #SharingKnowledge

  21. #TorontoON - #Site3CoLaboratory

    " #Site3 #CoLaboratory is a volunteer run #MakerSpace in #Toronto’s west end, at Ossington and Bloor.

    The shop is 2000 square feet and is fully equipped with #woodworking tools, #metalworking tools, #3DPrinters, electronics and more! See our 'Tools & Materials' page for more info and a complete tool list.

    The vision for our organization is to provide an inclusive space that promotes a four step cycle of create, display, teach and inspire.

    - Build and maintain an inspiring space and community that provides members with access to the right tools and knowledge to create anything they can think of.
    - Display, promote, and support member made projects.
    - Teach new #skills through regular events, #workshops, and #classes.
    - Inspire communities to bring their projects to life with our #CollectiveKnowledge, tools, and support.
    - Interested in learning more? Come by Site 3 for a tour any Thursday between 7-10pm!

    Membership

    Site 3 is 100% volunteer run and is a registered Ontario non-profit organization. We are a community of makers, artists, inventors, tinkerers, learners, teachers, and much more. If this sounds like your kind of thing, maybe you should join us?

    Membership Levels

    The membership structure consists of three levels. All three membership levels pay the same monthly dues of $60 plus #HST with different privileges for each membership level. We have a minimum 2 month membership period meaning your first and last month’s membership fees will be charged upon signup ($120 plus HST). Storage lockers are available at an additional monthly fee."

    FMI:
    site3.ca/

    #SolarPunkSunday #Ontario #CoLaboratory #MakerSpace #ToolLibrary #VolunteerHours #BuildingCommunity #Makers #DIY #SharingKnowledge

  22. Since a while, we have a lent screen printing machine in the lab and one of our members is currently doing a lot of experiments with it.

    Here are some impressions from the first self-made Munich Maker Lab screen and the first prints.

    #hackerspace #makerspace #openworkshop #MunichMakerLab #MuMaLab #Kreativquartier #Kreativlabor #DIYMunich #screenprinting #printmaking #makers

  23. Since a while, we have a lent screen printing machine in the lab and one of our members is currently doing a lot of experiments with it.

    Here are some impressions from the first self-made Munich Maker Lab screen and the first prints.

    #hackerspace #makerspace #openworkshop #MunichMakerLab #MuMaLab #Kreativquartier #Kreativlabor #DIYMunich #screenprinting #printmaking #makers

  24. #KitchenerON - #Kwartlab #MakerSpace

    "Welcome to Kwartzlab!

    Kwartzlab is a not for profit maker society in the #WaterlooON Region, providing tools, community connections and learning opportunities for makers in our area. Our members include self driven learners, long time enthusiasts, artists, advocates for maker culture and owners of maker-themed businesses."

    Only $59 per month (plus 1-2 hours of volunteer time).

    Tools include: "4-Shaft #Loom, #3DPrinting, #LaserCutter, #BridgeportCNC. And more in our metal shop!"

    FMI:
    kwartzlab.ca/

    #SolarPunkSunday #MakerSpace #Ontario #DIY #Makers

  25. #KitchenerON - #Kwartlab #MakerSpace

    "Welcome to Kwartzlab!

    Kwartzlab is a not for profit maker society in the #WaterlooON Region, providing tools, community connections and learning opportunities for makers in our area. Our members include self driven learners, long time enthusiasts, artists, advocates for maker culture and owners of maker-themed businesses."

    Only $59 per month (plus 1-2 hours of volunteer time).

    Tools include: "4-Shaft #Loom, #3DPrinting, #LaserCutter, #BridgeportCNC. And more in our metal shop!"

    FMI:
    kwartzlab.ca/

    #SolarPunkSunday #MakerSpace #Ontario #DIY #Makers

  26. “Goodbye Windows, welcome Linux”
    Linux Installation Workshop

    To mark Digital Independence Day (DI-Day), Computertruhe Munich is hosting a hands-on workshop where volunteers help you install Linux Mint on your laptop.

    Date: August 2, 2026
    Time: 14:00 – 18:00
    Location: Munich Maker Lab, Dachauer Str. 112h, 80636 Munich
    More details: @muenchen

    #hackerspace #makerspace #openworkshop #MunichMakerLab #MuMaLab #Kreativquartier #Kreativlabor #DIYMunich #linux #digitalindependence #foss

  27. “Goodbye Windows, welcome Linux”
    Linux Installation Workshop

    To mark Digital Independence Day (DI-Day), Computertruhe Munich is hosting a hands-on workshop where volunteers help you install Linux Mint on your laptop.

    Date: August 2, 2026
    Time: 14:00 – 18:00
    Location: Munich Maker Lab, Dachauer Str. 112h, 80636 Munich
    More details: @muenchen

    #hackerspace #makerspace #openworkshop #MunichMakerLab #MuMaLab #Kreativquartier #Kreativlabor #DIYMunich #linux #digitalindependence #foss

  28. 1. Lokale Partner*innen sind Türöffner & Vertrauensanker
    2. Themenbezogene Maker-Kits zusammenstellen, die gut transportiert werden können
    3. „Safe Space“ (auch für Fehler) schaffen
    4. Junge Role Models dabei haben
    5. Anleitung, Open Lab und Show&Tell kombinieren
    6. Elternarbeit und Community-Building führen zu langfristiger Teilnahme
    7. Anschlussbegleitung verdoppelt die Teilnahme an weiterführenden MINT-Angeboten

    #Makerspace #MINT #FediLZ

  29. 1. Lokale Partner*innen sind Türöffner & Vertrauensanker
    2. Themenbezogene Maker-Kits zusammenstellen, die gut transportiert werden können
    3. „Safe Space“ (auch für Fehler) schaffen
    4. Junge Role Models dabei haben
    5. Anleitung, Open Lab und Show&Tell kombinieren
    6. Elternarbeit und Community-Building führen zu langfristiger Teilnahme
    7. Anschlussbegleitung verdoppelt die Teilnahme an weiterführenden MINT-Angeboten

    #Makerspace #MINT #FediLZ

  30. Wie bleiben Mädchen langfristig bei MINT/Makerspace-Projekten dabei? Das hat die Hochschule Heilbronn mit einem mobilen Makerspace untersucht. Herausgekommen sind sieben Handlungsempfehlungen, die ich im Thread jetzt spoilern werde. Oder ihr ladet den bunten Leitfaden komplett runter ;)

    #Makerspace #MINT #FediLZ
    opus-hshn.bsz-bw.de/frontdoor/

  31. Wie bleiben Mädchen langfristig bei MINT/Makerspace-Projekten dabei? Das hat die Hochschule Heilbronn mit einem mobilen Makerspace untersucht. Herausgekommen sind sieben Handlungsempfehlungen, die ich im Thread jetzt spoilern werde. Oder ihr ladet den bunten Leitfaden komplett runter ;)

    #Makerspace #MINT #FediLZ
    opus-hshn.bsz-bw.de/frontdoor/

  32. Seit heute haben wir neben Lötkolben auch Ctrl + Z: einen Entlötkolben. Wenn ihr mal ein Loch zu viel zugelötet habt, eine Komponente falschherum drin steckt, dann jetzt auch mit der Möglichkeit das Lot wieder rauszusaugen und es erneut zu versuchen.
    #soldering #löten #makerspace #hannover

  33. Seit heute haben wir neben Lötkolben auch Ctrl + Z: einen Entlötkolben. Wenn ihr mal ein Loch zu viel zugelötet habt, eine Komponente falschherum drin steckt, dann jetzt auch mit der Möglichkeit das Lot wieder rauszusaugen und es erneut zu versuchen.
    #soldering #löten #makerspace #hannover

  34. Heute von 18 Uhr bis 21 Uhr ist Nähbar im Makerspace Gütersloh.
    Parallel dazu bauen wir leise unsere Maslow CNC zusammen.
    Kommt gerne zum einen oder anderen oder einfach so vorbei.

    #makerspace #Gütersloh #textile #maslowcnc

  35. Heute von 18 Uhr bis 21 Uhr ist Nähbar im Makerspace Gütersloh.
    Parallel dazu bauen wir leise unsere Maslow CNC zusammen.
    Kommt gerne zum einen oder anderen oder einfach so vorbei.

    #makerspace #Gütersloh #textile #maslowcnc

  36. 🎉🎉 Part-DB 2.14 has been released: It contains #MCP tool support so #AI agents can access Part-DB data (read only for now), CSV export for project BOM, Improved search, more control over which parameters fields get visible inside #kicad and more.

    See full release notes on #github: github.com/Part-DB/Part-DB-ser

    #electronics #opensource #webdev #hackerspace #makerspace #maker #make #selfhosted

  37. 🎉🎉 Part-DB 2.14 has been released: It contains #MCP tool support so #AI agents can access Part-DB data (read only for now), CSV export for project BOM, Improved search, more control over which parameters fields get visible inside #kicad and more.

    See full release notes on #github: github.com/Part-DB/Part-DB-ser

    #electronics #opensource #webdev #hackerspace #makerspace #maker #make

  38. I realized that Google sends most traffic to my 'basics' page, which used to be the worst place to start exploring my site 😅, so I decided to make it awesome: voltpaperscissors.com/basics

    #stem #stemeducation #papercircuit #papercraft #fediLZ #diy #education #maker #makerspace #makereducation

  39. I realized that Google sends most traffic to my 'basics' page, which used to be the worst place to start exploring my site 😅, so I decided to make it awesome: voltpaperscissors.com/basics

    #stem #stemeducation #papercircuit #papercraft #fediLZ #diy #education #maker #makerspace #makereducation

  40. Die Stickmaschine kommt zwar mit ihrem eigenen Untertisch, aber nur mit einem Boden. Den Boden haben wir jetzt gegen zwei Schubladen für Garn und Werkzeug getauscht, darunter noch einen weiteren Boden für Vlies und Filz eingebaut. An den Seiten zusätzlich noch Halter für Einsatzkästen mit Garn-Müll, Nadeln, Klammern, Scheren, ... Und Halter für die Stickrahmen. Lediglich der Kappenrahmen hat jetzt noch keinen Platz, aber der findet sich noch.
    #Sticken #Embroidery #Hannover #Makerspace #3dprint