#tagconnect — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #tagconnect, aggregated by home.social.
-
Что должно быть на каждой PCB с STM32
С моей точки зрения большинство разрабатываемых электронных плат работают под управлением микроконтроллера STM32. Если обобщить их схемотехнику, то можно кое-что вынести за скобки. Вот об этом сейчас и поговорим. Что должно быть заложено в каждую электронную плату на основе МК STM32? Само собой надо добавить квадратные первые пины на вилках, шелкографию, тест пады, симметричные отверстия 3мм по краям для крепления платы, удобный USB для питания и т.п. Но есть кое-что еще. Некоторые особенности проектирования PCB применимы только для STM32. Но обо всём по порядку.
https://habr.com/ru/articles/979482/
#stm32 #dac #test_pad #mco #tagconnect #SWD #uart #gnd #led #ЦАП
-
#TagConnect tips!
The "legged" (grabber) probe's four large NPTH holes can be too big to sneak traces around. So I made a plated-through footprint. Just set any hole (grabbers or pins) to a signal net and it turns into a chonky via!Tip 2. I had a very small board in the photos below. Too small for a the legged footprint, except if I hid it under a bulky mechanical component. So made an unholy TC2030 + CR1025 battery combo. You have to take the battery out to program, but I wanted that anyway.
-
Breaking mews:
🐾 New #PawConnect revision just dropped! 🐾Now featuring easier access to the middle paw pad. No more pawblems connecting!
(still untested ofc, but should work just as good as rev. A)
-
Now introducing:
🐾 The Paw-Connect! 🐾Add a special touch to your PCB designs with this adorable paw-shaped footprint compatible with the Tag-Connect TC2030. Let your circuits unleash their inner pawsitivity!
Get it, while it's hot: https://github.com/LeoDJ/Paw-Connect