home.social

#pinchingpennies — Public Fediverse posts

Live and recent posts from across the Fediverse tagged #pinchingpennies, aggregated by home.social.

  1. On the other side of the board is some of the #jankiest #soldering I have ever seen in a commercial product. Your typical $25 toaster doesn't look this bad. And if you look closely at the two indicated joints, which are the ones on the right-hand side of both resistors in the previous image, you'll see the top one looks like the #component lead barely made it through the board, and the bottom one appears to be sitting in the middle of a #solder doughnut.

    Spoiler: neither of those joints worked worth a damn. The resistors just pulled out with no resistance; the pads and tracks for those two locations were quite hefty, so they needed a lot of heat when I resoldered them. Clearly the #factory worker just hit each one for a second or two until the solder flowed, without actually properly heating the pads or the leads. So not just cold solder joints, but essentially no joint at all.

    #Resoldered, tested, reassembled, works perfectly now.

    So this toaster may be extremely badly designed, but at least it's poorly manufactured.

    Guess: the design made it very expensive to manufacture (see original thread), so some bean counter tried to pinch pennies where it counted, and picked the cheapest factory to have the work done. Bad tradeoff.

    If you have a $200 toaster that dies early, or arrived dead, or which catches fire the second time you use it, look for these joints 😄

    2/2

    #BeanCounter #MBA #manufacturer #LowestBidder #PinchingPennies #PCB #CircuitBoard #Chinesium

Share on Mastodon

Enter the server where you have an account.