Search
553 results for “flashprog”
-
#flashprog v1.5 is ready ⚡ grab the source and flash your #firmware!
This release supports the newest Intel and AMD chipsets. The latter, mostly read-only, alas. Plus a bunch of other changes, see the full release notes:
-
After making it into the @archlinux repository earlier this year, #flashprog found its way into #Debian unstable too now. 🥳 Many thanks to freswa and @sur5r for maintaining these packages!
It would be a nice surprise if we'd still make it into #Debian testing before the freeze tomorrow. Cross your fingers! 🤞
-
Another release is ready: #flashprog v1.4 waiting to be downloaded! 🥰
This release mostly brings support for new #flash chips, but also some more #SPI #EEPROM. Read more in the release notes:
-
@talpa don't know why that would be. It depends on the full command line and circumstances, though.
For instance, when #flashprog sees that the flash content is identical to the image to be written, it would skip both writing and verification. -
-
Flashprog v1.2 is dubbed Quadruped Tortoise 🎉
Our new release is ready for #firmware / #BIOS / #UEFI flashing: https://flashprog.org/wiki/Flashprog/v1.2
It finally brings the first bits of multi i/o and QPI support. Owners of a #Dediprog SF600 will definitely want to try this! 😉 There's also a new driver for #FTDI FT4222H.
After the release is before the release, and we are currently looking for testers of new chipset support: Any testing around Intel Meteor Lake or AMD Zen 4 and beyond is most welcome!
-
We're preparing for our next release to assist your #firmware, #BIOS, #UEFI hacking:
https://flashprog.org/wiki/Flashprog/v1.2
This one should be particularly interesting for developers: With multi i/o and #QPI support, #flash programming can be a lot faster now. There's a new driver for #FTDI FT4222H USB-to-SPI bridges -- probably our fastest supported programmer -- and #Dediprog SF600 users benefit as well.
Please grab the RC and test it :)
-
We're preparing for our next release to assist your #firmware, #BIOS, #UEFI hacking:
https://flashprog.org/wiki/Flashprog/v1.2
This one should be particularly interesting for developers: With multi i/o and #QPI support, #flash programming can be a lot faster now. There's a new driver for #FTDI FT4222H USB-to-SPI bridges -- probably our fastest supported programmer -- and #Dediprog SF600 users benefit as well.
Please grab the RC and test it :)
-
For developers working with JieLi microcontrollers, understanding the JL Forced Upgrade Tool 4.0's DIP switch is essential. This manual breakdown covers how to configure communication with a PC (Bit 7), set the default state of the DP/DM pins (Bit 5), and leverage the same pins for multiple protocols.
A versatile tool for development and production on the JieLi platform.
#JieLi #JL #EmbeddedSystems #Hardware #FlashProgramming #JTAG #Microcontroller #DIYElectronics
-
Flashpoint and digital preservation have been featured in an academic article with interviews from our members!
📄 See more at: https://repository.rice.edu/items/4cc07db1-e807-4c30-a03e-5ccfd8f8d8cb -
Anyone in @flashrom or @coreboot has any info on how to compile #flashrom using libpayload? Documentation has a TODO comment (https://github.com/flashrom/flashrom/blob/main/doc/dev_guide/building_from_source.rst#libpayload) and meson file does not have anything related... I am not versed on this but just a pointer may get me started...
-
This weekend’s projects:
1. Replace the PSU in the #Flashforge #Adventurer5M. The one it comes with has the fan going at all times, which is annoying. Meanwell makes a drop-in equivalent that… doesn’t. Unfortunately they tripled in price at some point.
2. Modify the Sunlu S2 dryer to hopefully be less noisy and not require the lid be propped open.
3. Install the #Microswiss Flowtech hotend on the #SovolSV08, if it shows up. The stock hotend is just ridiculous. A bunch of screws and thermal paste any time you want to change the nozzle? Might as well make me hot-tighten it, which I still have never done successfully. I’d rather have an E3D Revo solution rather than another standard but whatever. -
Ok...so my first spool of PETG comes in tomorrow. I have been printing for a whole 2 weeks.
#flashforge3d #flashforge #3dprinting #openscad
Any advise, tips, tricks or commentary?
-
Dieses Wochenende gab es für mich zwei neue #Brettspiele und drei alte Bekannte.
Neu war für mich #Altay, das ist ein Deckbuilder-getriebenes Area Control. Das Spiel ist nett, aber Area Control ist weiter nicht mein Ding.
Und #Lacuna. Ein gemütliches Ding für zwei, mit einer sehr ungewöhnlichen Tischpräsenz. 😳
Die alten Bekannten - #LetsGoToJapan, #JustOne und zweimal #FlashPoint - gehören zu meinen Lieblingsspielen, die funktionieren für mich immer.
Ein gutes Wochenende für mich. 👍
@brettspiele -
New Godox X3 Pro Wireless Flash Controller Aims to Do it All https://petapixel.com/2025/09/23/new-godox-x3-pro-wireless-flash-controller-aims-to-do-it-all/ #flashtrigger #godoxx3pro #Equipment #Lighting #lighting #flash #godox #News
-
Yesterday we were at my sister's and tried a #FlashPoint game —disastrous due to a combination of poor roster choices and unlucky dice rolls.
Tried again this morning just me and my son, we managed a “perfect game PLUS” (no deaths for the first 7 residents saved, continued and still managed to find and save *everyone*). Better roster choice and better dice rolls.
-
JUSTICE LEAGUE: THE FLASHPOINT PARADOX (2013)**
*"#FlashpointParadox (2013): 'DC's darkest timeline!' ⚡🦸♂️ Barry breaks reality. #DCAnimated
🔗 https://cine31.blogspot.com/2018/04/justice-league-flashpoint-paradox-2013.html -
Flashpoint Ignite enhancements improve threat intelligence https://www.helpnetsecurity.com/2025/04/28/flashpoint-ignite-threat-intelligence/ #Industrynews #Flashpoint #RSAC2025
-
Alright, it is time once again to attempt to print with the #Flashforge #AD5M. This time with the lid off, because I think the chamber is getting too hot.
What an absolute waste of time and money the enclosure kit will have been if it is really the problem. #3DPrinting
-
More thoughts:
* Heater does not keep up with how fast the printer wants to go
* Cooling does not keep up with how fast the printer wants to go
* You *think* flow calibration on other printers is a waste of time/filament, but the results are noticeably better on such printers without me having to do anything. Relevant if you want to use random spools of pricy filament.
* Incredibly loud -
Upon reflection, I think there is an argument that could be made that this is simpler for someone who has never used a printer before.
The PTFE tube is only lightly attached, so there’s no coupler to deal with. It’s not *that* anjoying, though I expect I will install a cutter at some point. #Flashforge #AD5M #3DPrinting
-
I’ve been doing some research and apparently the filament unload procedure on the #Flashforge Adventurer 5M involves removing the PTFE tube at the hotend and cutting the filament.
Why can’t the extruder just be run backwards like on every other printer? #3DPrinting
-
And then after printing this fidget cube mesh I downloaded for 3 hours no problem, my #flashforge Adventurer 5m just suddenly decided to stop with no error message or anything, nothing was happening so I clicked "pause" and now it's just Frozen on this paused screen with nothing clickable.
f*** technology man every time I start to have a little bit of fun it all just f****** breaks
-
We're FINALLY setting up the #flashforge #adventure5m #3dprinter I bought on sale over a month ago... I'm enlisting my husband's help because he's used 3d printers at his job a lot ago he at least has some idea what he's doing 😏 hopefully within the hour I'll be downloading test files online to start practicing my first ever 3d prints!
-
I just ordered this magnetic build plate upgrade for my #Flashforge Creator Max #3DPrinter from #Aliexpress. I was going on there to order a pack of build tape when I found this. I'm super excited to see how well it works because I am trying to lengthen this printer's life.
There was an aftermarket version with a PEI plate which I definitely considered, but I decided on this route since it is a genuine upgrade kit.
-
Ore To Iron In A Few Seconds: New Chinese Process Will Revolutionise Smelting https://hackaday.com/2024/12/12/ore-to-iron-in-a-few-seconds-new-chinese-process-will-revolutionise-smelting/ #flashironmaking #chemistryhacks #ironsmelting #smelting
-
An Arduino Triggers a Flash With Sound - To capture an instant on film or sensor with a camera, you usually need a fast shu... - https://hackaday.com/2024/10/15/an-arduino-triggers-a-flash-with-sound/ #digitalcamerashacks #flashphotography #arduinohacks #flashtrigger
-
Flash droughts intensified by rising temperatures pose a significant threat to global food security. To address this, we need resilient farming methods, climate-smart agriculture, early warning systems, and improved water security infrastructure.
-
:flagProgress: #HappyPRIDE everyone! :progress:
Here is #art posted by #CartoonNetwork socials of Gary and Marshal from #FionaAndCake.Worked on by twitter artists beaniewinnie96, BearsAreRed, nocusbonkus, and tumblr artist forestimps.
#Animation #Cartoons #AdultAnimation #LGBTQ #PRIDE -
would an altera usb blaster clone be okay for flashrom qspi dumping ?
or are there better alternatives nowadays ?
#flashrom