#polishing — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #polishing, aggregated by home.social.
-
Cooler today (only 25°C) so did exterior #valet of #Vauxhall / #Opel #Corsa - started with #snowfoam mix of Autoglym Polar Blast + BiltHamber Surfex HD at 10% (wouldn't normally use anything as heavy as that but you can see state car was in previously!)
Contact wash with CarPro Reset. No pics of snowfoam due to working fast because heat!
Single stage polish with Koch Chemie 3.01 mild compound+carnuba #wax, cheap cordless DA (compatible with #Makita batteries) and orange pad that came with it.
I'm fairly new to machine #polishing and didn't use best technique and too much polish (though some on YT recommend keeping pad saturated when working in hot weather to prevent polish drying out, and this seemed to work, #bodywork on this #car far from perfect anyway!)
-
Cooler today (only 25°C) so did exterior #valet of #Vauxhall / #Opel #Corsa - started with #snowfoam mix of Autoglym Polar Blast + BiltHamber Surfex HD at 10% (wouldn't normally use anything as heavy as that but you can see state car was in previously!)
Contact wash with CarPro Reset. No pics of snowfoam due to working fast because heat!
Single stage polish with Koch Chemie 3.01 mild compound+carnuba #wax, cheap cordless DA (compatible with #Makita batteries) and orange pad that came with it.
I'm fairly new to machine #polishing and didn't use best technique and too much polish (though some on YT recommend keeping pad saturated when working in hot weather to prevent polish drying out, and this seemed to work, #bodywork on this #car far from perfect anyway!)
-
Cooler today (only 25°C) so did exterior #valet of #Vauxhall / #Opel #Corsa - started with #snowfoam mix of Autoglym Polar Blast + BiltHamber Surfex HD at 10% (wouldn't normally use anything as heavy as that but you can see state car was in previously!)
Contact wash with CarPro Reset. No pics of snowfoam due to working fast because heat!
Single stage polish with Koch Chemie 3.01 mild compound+carnuba #wax, cheap cordless DA (compatible with #Makita batteries) and orange pad that came with it.
I'm fairly new to machine #polishing and didn't use best technique and too much polish (though some on YT recommend keeping pad saturated when working in hot weather to prevent polish drying out, and this seemed to work, #bodywork on this #car far from perfect anyway!)
-
Cooler today (only 25°C) so did exterior #valet of #Vauxhall / #Opel #Corsa - started with #snowfoam mix of Autoglym Polar Blast + BiltHamber Surfex HD at 10% (wouldn't normally use anything as heavy as that but you can see state car was in previously!)
Contact wash with CarPro Reset. No pics of snowfoam due to working fast because heat!
Single stage polish with Koch Chemie 3.01 mild compound+carnuba #wax, cheap cordless DA (compatible with #Makita batteries) and orange pad that came with it.
I'm fairly new to machine #polishing and didn't use best technique and too much polish (though some on YT recommend keeping pad saturated when working in hot weather to prevent polish drying out, and this seemed to work, #bodywork on this #car far from perfect anyway!)
-
Cooler today (only 25°C) so did exterior #valet of #Vauxhall / #Opel #Corsa - started with #snowfoam mix of Autoglym Polar Blast + BiltHamber Surfex HD at 10% (wouldn't normally use anything as heavy as that but you can see state car was in previously!)
Contact wash with CarPro Reset. No pics of snowfoam due to working fast because heat!
Single stage polish with Koch Chemie 3.01 mild compound+carnuba #wax, cheap cordless DA (compatible with #Makita batteries) and orange pad that came with it.
I'm fairly new to machine #polishing and didn't use best technique and too much polish (though some on YT recommend keeping pad saturated when working in hot weather to prevent polish drying out, and this seemed to work, #bodywork on this #car far from perfect anyway!)
-
Cast Iron Skillet Set Market in Germany | Report – IndexBox
Germany Cast Iron Skillet Set Market 2026 Analysis and Forecast to 2035 Execu…
#Germany #DE #Europe #EU #Europa #Baking(e.g. #castironskilletset #consumergoodsmarketreport #cornbread) #Enamelcoatingapplication #forecast #frittatas) #marketanalysis #Oven-to-tableserving #Pan-frying&sautéing #polishing) #Pre-seasoningprocesses(oilbaking) #Sand-castingmolds #Searingmeats #Surfacefinishing(grinding
https://www.europesays.com/germany/13653/ -
Microfiber Cleaning Cloths Refill Market in Spain | Report – IndexBox
Spain Microfiber Cleaning Cloths Refill Market 2026 Analysis and Forecast to 2035 Executive Summary Key Findings S…
#Spain #ES #Europe #Europa #EU #Antibacterialtreatments #consumergoodsmarketreport #Dusting #Edge-sealingtechnologies #forecast #Glasscleaning #marketanalysis #microfibercleaningclothsrefill #Non-wovenbonding #Polishing #Split-fibermicrofiberweaving #Spray-and-wipecleaning
https://www.europesays.com/spain/22191/ -
https://www.europesays.com/uk/955538/ Microfiber Cleaning Cloths Refill Market in Spain | Report – IndexBox #AntibacterialTreatments #ConsumerGoodsMarketReport #Dusting #EdgeSealingTechnologies #EU #Europe #Forecast #GlassCleaning #MarketAnalysis #MicrofiberCleaningClothsRefill #NonWovenBonding #Polishing #Spain #SplitFiberMicrofiberWeaving #SprayAndWipeCleaning
-
Recently, I polished the silver, most of which I found thrifting. Bottom row, in the middle, is the gravy boat I showed you recently. From black to shiny: so satisfying! 😄
-
I am almost finished with wet sanding the last side of the last glider wing.
The orbital sander has done all it can do on the mostly flat top and bottom of the wing, but the leading edge is strongly curved.
I'll sand that narrow strip by hand...tomorrow when I'm not tired.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Wing
-
I am almost finished with wet sanding the last side of the last glider wing.
The orbital sander has done all it can do on the mostly flat top and bottom of the wing, but the leading edge is strongly curved.
I'll sand that narrow strip by hand...tomorrow when I'm not tired.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Wing
-
I am almost finished with wet sanding the last side of the last glider wing.
The orbital sander has done all it can do on the mostly flat top and bottom of the wing, but the leading edge is strongly curved.
I'll sand that narrow strip by hand...tomorrow when I'm not tired.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Wing
-
I am almost finished with wet sanding the last side of the last glider wing.
The orbital sander has done all it can do on the mostly flat top and bottom of the wing, but the leading edge is strongly curved.
I'll sand that narrow strip by hand...tomorrow when I'm not tired.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Wing
-
I am almost finished with wet sanding the last side of the last glider wing.
The orbital sander has done all it can do on the mostly flat top and bottom of the wing, but the leading edge is strongly curved.
I'll sand that narrow strip by hand...tomorrow when I'm not tired.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Wing
-
Dirty Pots, Meet Power Tools! - Let’s face it, nobody likes scrubbing, but what option do you have? You can’t exac... - https://hackaday.com/2025/09/19/dirty-pots-meet-power-tools/ #oscillatingtool #toolhacks #polishing #3dprint
-
I must be making good progress wet sanding the glider's wing.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Mess
-
I must be making good progress wet sanding the glider's wing.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Mess
-
I must be making good progress wet sanding the glider's wing.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Mess
-
I must be making good progress wet sanding the glider's wing.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Mess
-
I must be making good progress wet sanding the glider's wing.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Mess
-
The final (2nd) glider wing is getting sanded to remove orange peel from the polyurethane topcoat.
After sanding is complete, I'll buff it with rubbing compound to give it a semi-mirror finish.
Tomorrow I hope to finish sanding this top side. (The bottom remains unsanded.)
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing
-
The final (2nd) glider wing is getting sanded to remove orange peel from the polyurethane topcoat.
After sanding is complete, I'll buff it with rubbing compound to give it a semi-mirror finish.
Tomorrow I hope to finish sanding this top side. (The bottom remains unsanded.)
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing
-
The final (2nd) glider wing is getting sanded to remove orange peel from the polyurethane topcoat.
After sanding is complete, I'll buff it with rubbing compound to give it a semi-mirror finish.
Tomorrow I hope to finish sanding this top side. (The bottom remains unsanded.)
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing
-
The final (2nd) glider wing is getting sanded to remove orange peel from the polyurethane topcoat.
After sanding is complete, I'll buff it with rubbing compound to give it a semi-mirror finish.
Tomorrow I hope to finish sanding this top side. (The bottom remains unsanded.)
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing
-
The final (2nd) glider wing is getting sanded to remove orange peel from the polyurethane topcoat.
After sanding is complete, I'll buff it with rubbing compound to give it a semi-mirror finish.
Tomorrow I hope to finish sanding this top side. (The bottom remains unsanded.)
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing
-
#Testing and #polishing the Dusty tome... #opensource #game
-
It was time to sharpen the points of spears & blades, to check that arrowheads were firmly affixed to shafts. But one youth sat #polishing shields.
"What are you doing?" growled a commander. "All a shield needs is strength--stop wasting time!"
"It's not wasted," the youth replied. "Just wait."
When evening approached, a group of young people stood the polished shields up in the sand to reflect the rays of the setting sun--into the eyes of the advancing foe.
-
Clickspring’s Experimental Archaeology: Concentric Thin-Walled Tubing https://hackaday.com/2025/04/25/clicksprings-experimental-archaeology-concentric-thin-walled-tubing/ #antikythera #MiscHacks #antiquity #machining #polishing #lapping #reaming #boring #lathe #rouge
-
More progress pics from an upcoming project... no no not a lamp but.....
a Luminaire (🤨 expensive word for lamp)Demolding images..
For finished work thuhshop ->
https://thuhstudio.etsy.com#lamp #making #progress #process #casting #mold #concrete #luminaire #geometry #architecture #art #demolding #productdesign #wip #funwithfoam #polishing #wetsanding #terrazzo
-
More progress pics from an upcoming project... no no not a lamp but.....
a Luminaire (🤨 expensive word for lamp)Demolding images..
For finished work thuhshop ->
https://thuhstudio.etsy.com#lamp #making #progress #process #casting #mold #concrete #luminaire #geometry #architecture #art #demolding #productdesign #wip #funwithfoam #polishing #wetsanding #terrazzo
-
More progress pics from an upcoming project... no no not a lamp but.....
a Luminaire (🤨 expensive word for lamp)Demolding images..
For finished work thuhshop ->
https://thuhstudio.etsy.com#lamp #making #progress #process #casting #mold #concrete #luminaire #geometry #architecture #art #demolding #productdesign #wip #funwithfoam #polishing #wetsanding #terrazzo
-
More progress pics from an upcoming project... no no not a lamp but.....
a Luminaire (🤨 expensive word for lamp)Demolding images..
For finished work thuhshop ->
https://thuhstudio.etsy.com#lamp #making #progress #process #casting #mold #concrete #luminaire #geometry #architecture #art #demolding #productdesign #wip #funwithfoam #polishing #wetsanding #terrazzo
-
More progress pics from an upcoming project... no no not a lamp but.....
a Luminaire (🤨 expensive word for lamp)Demolding images..
For finished work thuhshop ->
https://thuhstudio.etsy.com#lamp #making #progress #process #casting #mold #concrete #luminaire #geometry #architecture #art #demolding #productdesign #wip #funwithfoam #polishing #wetsanding #terrazzo
-
🤖 'hi' 👋🏻🙌🏻
for finished work aivailable in ThuhShop :thinkerguns:
https://thuhstudio.etsy.com#unmolding #unboxing #concrete #walle #robot #sculpture #shipbuilding #workinprogress #sanding #polishing #stonework #hello #surprise #ashes #rise #architecture #birth #art #abstract #craft #handmade
-
🤖 'hi' 👋🏻🙌🏻
for finished work aivailable in ThuhShop :thinkerguns:
https://thuhstudio.etsy.com#unmolding #unboxing #concrete #walle #robot #sculpture #shipbuilding #workinprogress #sanding #polishing #stonework #hello #surprise #ashes #rise #architecture #birth #art #abstract #craft #handmade
-
🤖 'hi' 👋🏻🙌🏻
for finished work aivailable in ThuhShop :thinkerguns:
https://thuhstudio.etsy.com#unmolding #unboxing #concrete #walle #robot #sculpture #shipbuilding #workinprogress #sanding #polishing #stonework #hello #surprise #ashes #rise #architecture #birth #art #abstract #craft #handmade
-
🤖 'hi' 👋🏻🙌🏻
for finished work aivailable in ThuhShop :thinkerguns:
https://thuhstudio.etsy.com#unmolding #unboxing #concrete #walle #robot #sculpture #shipbuilding #workinprogress #sanding #polishing #stonework #hello #surprise #ashes #rise #architecture #birth #art #abstract #craft #handmade
-
🤖 'hi' 👋🏻🙌🏻
for finished work aivailable in ThuhShop :thinkerguns:
https://thuhstudio.etsy.com#unmolding #unboxing #concrete #walle #robot #sculpture #shipbuilding #workinprogress #sanding #polishing #stonework #hello #surprise #ashes #rise #architecture #birth #art #abstract #craft #handmade
-
[#TRADESHOW] #World of #Concrete #Asia presents #quality #products in the #industry such as #general concrete, concrete #surface #treatment, concrete #additives, #waste concrete #recycling #equipment and products, #leveling equipment, #polishing equipment, #flooring, and #mortar #testing equipment. 14.-16. August 2024. SNIEC (Shanghai New #International #Expo #Centre), #Shanghai, #China. https://cnbusinessforum.com/event/world-of-concrete-asia-2024-premier-concrete-flooring-mortar-expo/
-
[#TRADESHOW] #World of #Concrete #Asia presents #quality #products in the #industry such as #general concrete, concrete #surface #treatment, concrete #additives, #waste concrete #recycling #equipment and products, #leveling equipment, #polishing equipment, #flooring, and #mortar #testing equipment. 14.-16. August 2024. SNIEC (Shanghai New #International #Expo #Centre), #Shanghai, #China. https://cnbusinessforum.com/event/world-of-concrete-asia-2024-premier-concrete-flooring-mortar-expo/
-
Wet Polishing In Progress
💪 😼 🦾 😅 :pensive_party_blob:For finished work check out ThuhShop :thinkerguns:
#wip #painstaking #polishing #concrete #terrazzo #granite #sculpting #artwork #studio #art #design #lampmaking #lamp #marble #tools #toolsofthetrade #making #craft #artsandcraft
-
[#TRADESHOW] #World of #Concrete #Asia presents #quality #products in the #industry such as #general concrete, concrete #surface #treatment, concrete #additives, #waste concrete #recycling #equipment and products, #leveling equipment, #polishing equipment, #flooring, and #mortar #testing equipment. 14.-16. August 2024. SNIEC (Shanghai New #International #Expo #Centre), #Shanghai, #China. https://cnbusinessforum.com/event/world-of-concrete-asia-2024-premier-concrete-flooring-mortar-expo/
-
[#TRADESHOW] #World of #Concrete #Asia #exhibition presents quality #products in the #industry such as #general concrete, concrete #surface #treatment, concrete #additives, #waste concrete #recycling #equipment and products, #leveling equipment, #polishing equipment, #flooring, and #mortar #testing equipment. 14.-16. August 2024. SNIEC (Shanghai New #International #Expo Centre), #Shanghai, #China. https://cnbusinessforum.com/event/world-of-concrete-asia-2024-premier-concrete-flooring-mortar-expo/
-
Honda Fit GD3, Getting Its Shine On #Honda #Fit #Jazz #GD3 #Polishing #Detailing
https://tasteslikepetrol.net/2024/04/honda-fit-gd3-getting-its-shine-on/
-
A 3D Printed Grinder for Printed Lens Blanks - When one thinks of applications for 3D printing, optical components don’t seem to ... - https://hackaday.com/2023/11/16/a-3d-printed-grinder-for-printed-lens-blanks/ #toolhacks #polishing #grinding #blanks #parts #optic #resin #lens #fdm #sla
-
In the West Country, an extremely rare 'polishing stone' has been found. The huge boulder has a smooth dip in which neolithic people would have polished the cutting edges of stone tools.
#GoodNews #Neolithic #Stone #Polishing #Archaology #Find #History #Dorset
-
In the West Country, an extremely rare 'polishing stone' has been found. The huge boulder has a smooth dip in which neolithic people would have polished the cutting edges of stone tools.
#GoodNews #Neolithic #Stone #Polishing #Archaology #Find #History #Dorset
-
In the West Country, an extremely rare 'polishing stone' has been found. The huge boulder has a smooth dip in which neolithic people would have polished the cutting edges of stone tools.
#GoodNews #Neolithic #Stone #Polishing #Archaology #Find #History #Dorset
-
In the West Country, an extremely rare 'polishing stone' has been found. The huge boulder has a smooth dip in which neolithic people would have polished the cutting edges of stone tools.
#GoodNews #Neolithic #Stone #Polishing #Archaology #Find #History #Dorset