#myog — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #myog, aggregated by home.social.
-
On my way to #supermellowbeachcruise with my not-quite finished longboard bag. Mistakes were made. I'll try to reinforce the back so the weight of the board doesn't sag and make me worry about the ring tearing off. Also missing the pocket and Velcro to secure the flaps wrapping around the trucks.
The trim goes nicely with the wheels, though!
-
On my way to #supermellowbeachcruise with my not-quite finished longboard bag. Mistakes were made. I'll try to reinforce the back so the weight of the board doesn't sag and make me worry about the ring tearing off. Also missing the pocket and Velcro to secure the flaps wrapping around the trucks.
The trim goes nicely with the wheels, though!
-
On my way to #supermellowbeachcruise with my not-quite finished longboard bag. Mistakes were made. I'll try to reinforce the back so the weight of the board doesn't sag and make me worry about the ring tearing off. Also missing the pocket and Velcro to secure the flaps wrapping around the trucks.
The trim goes nicely with the wheels, though!
-
On my way to #supermellowbeachcruise with my not-quite finished longboard bag. Mistakes were made. I'll try to reinforce the back so the weight of the board doesn't sag and make me worry about the ring tearing off. Also missing the pocket and Velcro to secure the flaps wrapping around the trucks.
The trim goes nicely with the wheels, though!
-
On my way to #supermellowbeachcruise with my not-quite finished longboard bag. Mistakes were made. I'll try to reinforce the back so the weight of the board doesn't sag and make me worry about the ring tearing off. Also missing the pocket and Velcro to secure the flaps wrapping around the trucks.
The trim goes nicely with the wheels, though!
-
Got another longboard a couple of weeks ago, and as I start hand sewing a new bag for it I thought I might as well share the first one I made. I don't think I've seen other skateboard bags in other make-your-own-gear posts so hopefully this still counts.
This is the biggest sewing project I've taken on and made a lot of mistakes, but I'm pleased with the results.
-
Got another longboard a couple of weeks ago, and as I start hand sewing a new bag for it I thought I might as well share the first one I made. I don't think I've seen other skateboard bags in other make-your-own-gear posts so hopefully this still counts.
This is the biggest sewing project I've taken on and made a lot of mistakes, but I'm pleased with the results.
-
Got another longboard a couple of weeks ago, and as I start hand sewing a new bag for it I thought I might as well share the first one I made. I don't think I've seen other skateboard bags in other make-your-own-gear posts so hopefully this still counts.
This is the biggest sewing project I've taken on and made a lot of mistakes, but I'm pleased with the results.
-
Got another longboard a couple of weeks ago, and as I start hand sewing a new bag for it I thought I might as well share the first one I made. I don't think I've seen other skateboard bags in other make-your-own-gear posts so hopefully this still counts.
This is the biggest sewing project I've taken on and made a lot of mistakes, but I'm pleased with the results.
-
Got another longboard a couple of weeks ago, and as I start hand sewing a new bag for it I thought I might as well share the first one I made. I don't think I've seen other skateboard bags in other make-your-own-gear posts so hopefully this still counts.
This is the biggest sewing project I've taken on and made a lot of mistakes, but I'm pleased with the results.
-
Die Tage habe ich endlich mal den Framebag für's GT genäht. Jetzt mache ich mir Sorgen bald auszusehen wie so ein Bikepacker mit ihren tausend Taschen 🫣
Eigentlich bin ich großer Fan davon all meine Tour-Ausrüstung in die Fronttasche zu packen und sonst nichts am Rad bammeln zu haben. Wenn ich aber mal weniger Kram brauche, ist es auch nett ohne die große Fronttasche fahren zu können. -
Die Tage habe ich endlich mal den Framebag für's GT genäht. Jetzt mache ich mir Sorgen bald auszusehen wie so ein Bikepacker mit ihren tausend Taschen 🫣
Eigentlich bin ich großer Fan davon all meine Tour-Ausrüstung in die Fronttasche zu packen und sonst nichts am Rad bammeln zu haben. Wenn ich aber mal weniger Kram brauche, ist es auch nett ohne die große Fronttasche fahren zu können. -
Die Tage habe ich endlich mal den Framebag für's GT genäht. Jetzt mache ich mir Sorgen bald auszusehen wie so ein Bikepacker mit ihren tausend Taschen 🫣
Eigentlich bin ich großer Fan davon all meine Tour-Ausrüstung in die Fronttasche zu packen und sonst nichts am Rad bammeln zu haben. Wenn ich aber mal weniger Kram brauche, ist es auch nett ohne die große Fronttasche fahren zu können. -
Made a ~50L pack liner out of 1.0 oz Dyneema to fit both my larger ULA Catalyst backpack and my Osprey Mutant 38 mountaineering backpack.
The design minimizes seams and uses folded darts to create a domed bottom and elevate the bottom seam by about 8 centimeters. Fully seam taped to keep water out.
The roll top uses 4mm foam as a stiffener and 3 snaps to hold the edges together before rolling. A 15mm (5/8") Magic buckle snaps together when closing thanks to small magnets in each half.
The Bio Hazard alerts anyone who dares to open the liner after sweating for several days in the great outdoors.
Total weight: 58gr.
#MYOG #MountainGoatMade #ultralightbackpacking #ultralight #patternmaking
-
Made a ~50L pack liner out of 1.0 oz Dyneema to fit both my larger ULA Catalyst backpack and my Osprey Mutant 38 mountaineering backpack.
The design minimizes seams and uses folded darts to create a domed bottom and elevate the bottom seam by about 8 centimeters. Fully seam taped to keep water out.
The roll top uses 4mm foam as a stiffener and 3 snaps to hold the edges together before rolling. A 15mm (5/8") Magic buckle snaps together when closing thanks to small magnets in each half.
The Bio Hazard alerts anyone who dares to open the liner after sweating for several days in the great outdoors.
Total weight: 58gr.
#MYOG #MountainGoatMade #ultralightbackpacking #ultralight #patternmaking
-
Made a ~50L pack liner out of 1.0 oz Dyneema to fit both my larger ULA Catalyst backpack and my Osprey Mutant 38 mountaineering backpack.
The design minimizes seams and uses folded darts to create a domed bottom and elevate the bottom seam by about 8 centimeters. Fully seam taped to keep water out.
The roll top uses 4mm foam as a stiffener and 3 snaps to hold the edges together before rolling. A 15mm (5/8") Magic buckle snaps together when closing thanks to small magnets in each half.
The Bio Hazard alerts anyone who dares to open the liner after sweating for several days in the great outdoors.
Total weight: 58gr.
#MYOG #MountainGoatMade #ultralightbackpacking #ultralight #patternmaking
-
Made a ~50L pack liner out of 1.0 oz Dyneema to fit both my larger ULA Catalyst backpack and my Osprey Mutant 38 mountaineering backpack.
The design minimizes seams and uses folded darts to create a domed bottom and elevate the bottom seam by about 8 centimeters. Fully seam taped to keep water out.
The roll top uses 4mm foam as a stiffener and 3 snaps to hold the edges together before rolling. A 15mm (5/8") Magic buckle snaps together when closing thanks to small magnets in each half.
The Bio Hazard alerts anyone who dares to open the liner after sweating for several days in the great outdoors.
Total weight: 58gr.
#MYOG #MountainGoatMade #ultralightbackpacking #ultralight #patternmaking
-
Made a ~50L pack liner out of 1.0 oz Dyneema to fit both my larger ULA Catalyst backpack and my Osprey Mutant 38 mountaineering backpack.
The design minimizes seams and uses folded darts to create a domed bottom and elevate the bottom seam by about 8 centimeters. Fully seam taped to keep water out.
The roll top uses 4mm foam as a stiffener and 3 snaps to hold the edges together before rolling. A 15mm (5/8") Magic buckle snaps together when closing thanks to small magnets in each half.
The Bio Hazard alerts anyone who dares to open the liner after sweating for several days in the great outdoors.
Total weight: 58gr.
#MYOG #MountainGoatMade #ultralightbackpacking #ultralight #patternmaking
-
Starting to rekindle my sewing habit with some #myog (make your own gear) packing cubes.
Proud of them, besides the fact that I sewed the big one completely inside out and didn’t even realize until I had stitched the last stitch. 😅 Looks funky but I guess it’s still functional?
-
Starting to rekindle my sewing habit with some #myog (make your own gear) packing cubes.
Proud of them, besides the fact that I sewed the big one completely inside out and didn’t even realize until I had stitched the last stitch. 😅 Looks funky but I guess it’s still functional?
-
Starting to rekindle my sewing habit with some #myog (make your own gear) packing cubes.
Proud of them, besides the fact that I sewed the big one completely inside out and didn’t even realize until I had stitched the last stitch. 😅 Looks funky but I guess it’s still functional?
-
Starting to rekindle my sewing habit with some #myog (make your own gear) packing cubes.
Proud of them, besides the fact that I sewed the big one completely inside out and didn’t even realize until I had stitched the last stitch. 😅 Looks funky but I guess it’s still functional?
-
Starting to rekindle my sewing habit with some #myog (make your own gear) packing cubes.
Proud of them, besides the fact that I sewed the big one completely inside out and didn’t even realize until I had stitched the last stitch. 😅 Looks funky but I guess it’s still functional?
-
First sewing project (pencil case) complete! I thought recycling a reusable Walmart bag was the best choice to practice with and I liked the way it turned out. I feel like I did a decent job and any places where the stitching wasn't exactly straight is hidden inside the seams. Biggest misstep was sewing the zip too tight and needing to make some adjustments ✂️
Definitely more confidence earned for next project ✨ I want to do it again and use something heavier so it's got more structure.
I wanted to test out the decorative top stitching so shamrocks and hearts seemed like an obvious choice 🇮🇪
-
First sewing project (pencil case) complete! I thought recycling a reusable Walmart bag was the best choice to practice with and I liked the way it turned out. I feel like I did a decent job and any places where the stitching wasn't exactly straight is hidden inside the seams. Biggest misstep was sewing the zip too tight and needing to make some adjustments ✂️
Definitely more confidence earned for next project ✨ I want to do it again and use something heavier so it's got more structure.
I wanted to test out the decorative top stitching so shamrocks and hearts seemed like an obvious choice 🇮🇪
-
First sewing project (pencil case) complete! I thought recycling a reusable Walmart bag was the best choice to practice with and I liked the way it turned out. I feel like I did a decent job and any places where the stitching wasn't exactly straight is hidden inside the seams. Biggest misstep was sewing the zip too tight and needing to make some adjustments ✂️
Definitely more confidence earned for next project ✨ I want to do it again and use something heavier so it's got more structure.
I wanted to test out the decorative top stitching so shamrocks and hearts seemed like an obvious choice 🇮🇪
-
First sewing project (pencil case) complete! I thought recycling a reusable Walmart bag was the best choice to practice with and I liked the way it turned out. I feel like I did a decent job and any places where the stitching wasn't exactly straight is hidden inside the seams. Biggest misstep was sewing the zip too tight and needing to make some adjustments ✂️
Definitely more confidence earned for next project ✨ I want to do it again and use something heavier so it's got more structure.
I wanted to test out the decorative top stitching so shamrocks and hearts seemed like an obvious choice 🇮🇪
-
First sewing project (pencil case) complete! I thought recycling a reusable Walmart bag was the best choice to practice with and I liked the way it turned out. I feel like I did a decent job and any places where the stitching wasn't exactly straight is hidden inside the seams. Biggest misstep was sewing the zip too tight and needing to make some adjustments ✂️
Definitely more confidence earned for next project ✨ I want to do it again and use something heavier so it's got more structure.
I wanted to test out the decorative top stitching so shamrocks and hearts seemed like an obvious choice 🇮🇪
-
Sewed a new cover for the mini greenhouse. The old one had completely disintegrated in the sun. Re-used donated zippers from an old hot tub cover.
The 6 mil plastic sewed fine but the large canvas and the slick material were at times challenging to control.
Pleased with the outcome and happy to #repair, #reuse to extend this greenhouse's life. I call it re- #MYOG : Re-Make Your Own Greenhouse. ツ
-
Sewed a new cover for the mini greenhouse. The old one had completely disintegrated in the sun. Re-used donated zippers from an old hot tub cover.
The 6 mil plastic sewed fine but the large canvas and the slick material were at times challenging to control.
Pleased with the outcome and happy to #repair, #reuse to extend this greenhouse's life. I call it re- #MYOG : Re-Make Your Own Greenhouse. ツ
-
Sewed a new cover for the mini greenhouse. The old one had completely disintegrated in the sun. Re-used donated zippers from an old hot tub cover.
The 6 mil plastic sewed fine but the large canvas and the slick material were at times challenging to control.
Pleased with the outcome and happy to #repair, #reuse to extend this greenhouse's life. I call it re- #MYOG : Re-Make Your Own Greenhouse. ツ
-
Sewed a new cover for the mini greenhouse. The old one had completely disintegrated in the sun. Re-used donated zippers from an old hot tub cover.
The 6 mil plastic sewed fine but the large canvas and the slick material were at times challenging to control.
Pleased with the outcome and happy to #repair, #reuse to extend this greenhouse's life. I call it re- #MYOG : Re-Make Your Own Greenhouse. ツ
-
Sewed a new cover for the mini greenhouse. The old one had completely disintegrated in the sun. Re-used donated zippers from an old hot tub cover.
The 6 mil plastic sewed fine but the large canvas and the slick material were at times challenging to control.
Pleased with the outcome and happy to #repair, #reuse to extend this greenhouse's life. I call it re- #MYOG : Re-Make Your Own Greenhouse. ツ
-
The model(s) for these labels are available from https://makerworld.com/en/models/2992354-sewing-machine-needle-labels
-
The model(s) for these labels are available from https://makerworld.com/en/models/2992354-sewing-machine-needle-labels
-
The model(s) for these labels are available from https://makerworld.com/en/models/2992354-sewing-machine-needle-labels
-
The model(s) for these labels are available from https://makerworld.com/en/models/2992354-sewing-machine-needle-labels
-
The model(s) for these labels are available from https://makerworld.com/en/models/2992354-sewing-machine-needle-labels
-
3D printed magnetic needle labels attached to every machine so that I know how the machine is setup.
I switch out the label every time I load a new needle so that I don't have to remove the needle to check its size and type.
-
3D printed magnetic needle labels attached to every machine so that I know how the machine is setup.
I switch out the label every time I load a new needle so that I don't have to remove the needle to check its size and type.
-
3D printed magnetic needle labels attached to every machine so that I know how the machine is setup.
I switch out the label every time I load a new needle so that I don't have to remove the needle to check its size and type.
-
3D printed magnetic needle labels attached to every machine so that I know how the machine is setup.
I switch out the label every time I load a new needle so that I don't have to remove the needle to check its size and type.
-
3D printed magnetic needle labels attached to every machine so that I know how the machine is setup.
I switch out the label every time I load a new needle so that I don't have to remove the needle to check its size and type.
-
Made some weights to keep the umbrellas upright in the wind. Made from fabric "scraps" and zippers salvaged from an old #MYOG Gore-Tex jacket.
Filled with 11kg of beach sand from one of Santa Cruz' beaches.
-
Made some weights to keep the umbrellas upright in the wind. Made from fabric "scraps" and zippers salvaged from an old #MYOG Gore-Tex jacket.
Filled with 11kg of beach sand from one of Santa Cruz' beaches.
-
Made some weights to keep the umbrellas upright in the wind. Made from fabric "scraps" and zippers salvaged from an old #MYOG Gore-Tex jacket.
Filled with 11kg of beach sand from one of Santa Cruz' beaches.
-
Made some weights to keep the umbrellas upright in the wind. Made from fabric "scraps" and zippers salvaged from an old #MYOG Gore-Tex jacket.
Filled with 11kg of beach sand from one of Santa Cruz' beaches.
-
Achievement unlocked! The Brother KE-430D bar tacker I bought last year is now fully operational. I have access to all 89 stock patterns.
The control panel of the machine says 3 phase 220V which had me scramble to get 3 phase power to the basement. Closer inspection however, revealed that the bar tacker was wired for single phase 220V, which I already have available. A new power plug brought the machine to life.
This is when I learned that the work clamp was worn and the work plate didn't support all patterns. Now with a new clamp and plate, I can sew all available patterns. I can't wait to put this machine to use!
-
Achievement unlocked! The Brother KE-430D bar tacker I bought last year is now fully operational. I have access to all 89 stock patterns.
The control panel of the machine says 3 phase 220V which had me scramble to get 3 phase power to the basement. Closer inspection however, revealed that the bar tacker was wired for single phase 220V, which I already have available. A new power plug brought the machine to life.
This is when I learned that the work clamp was worn and the work plate didn't support all patterns. Now with a new clamp and plate, I can sew all available patterns. I can't wait to put this machine to use!
-
Achievement unlocked! The Brother KE-430D bar tacker I bought last year is now fully operational. I have access to all 89 stock patterns.
The control panel of the machine says 3 phase 220V which had me scramble to get 3 phase power to the basement. Closer inspection however, revealed that the bar tacker was wired for single phase 220V, which I already have available. A new power plug brought the machine to life.
This is when I learned that the work clamp was worn and the work plate didn't support all patterns. Now with a new clamp and plate, I can sew all available patterns. I can't wait to put this machine to use!
-
Achievement unlocked! The Brother KE-430D bar tacker I bought last year is now fully operational. I have access to all 89 stock patterns.
The control panel of the machine says 3 phase 220V which had me scramble to get 3 phase power to the basement. Closer inspection however, revealed that the bar tacker was wired for single phase 220V, which I already have available. A new power plug brought the machine to life.
This is when I learned that the work clamp was worn and the work plate didn't support all patterns. Now with a new clamp and plate, I can sew all available patterns. I can't wait to put this machine to use!
-
Achievement unlocked! The Brother KE-430D bar tacker I bought last year is now fully operational. I have access to all 89 stock patterns.
The control panel of the machine says 3 phase 220V which had me scramble to get 3 phase power to the basement. Closer inspection however, revealed that the bar tacker was wired for single phase 220V, which I already have available. A new power plug brought the machine to life.
This is when I learned that the work clamp was worn and the work plate didn't support all patterns. Now with a new clamp and plate, I can sew all available patterns. I can't wait to put this machine to use!
-
And post number two offloaded. Completed this frame bag guide, as it was collecting dust for quite a while (started a little more than one year ago). The frame bag is still going strong after more than 5000km of cycling!
https://joelvonrotz.ch/writing/sewing-a-framebag/
#myog #bikepacking #biketouring #biketooter #biketoot #100DaysToOffload
-
And post number two offloaded. Completed this frame bag guide, as it was collecting dust for quite a while (started a little more than one year ago). The frame bag is still going strong after more than 5000km of cycling!
https://joelvonrotz.ch/writing/sewing-a-framebag/
#myog #bikepacking #biketouring #biketooter #biketoot #100DaysToOffload
-
And post number two offloaded. Completed this frame bag guide, as it was collecting dust for quite a while (started a little more than one year ago). The frame bag is still going strong after more than 5000km of cycling!
https://joelvonrotz.ch/writing/sewing-a-framebag/
#myog #bikepacking #biketouring #biketooter #biketoot #100DaysToOffload
-
And post number two offloaded. Completed this frame bag guide, as it was collecting dust for quite a while (started a little more than one year ago). The frame bag is still going strong after more than 5000km of cycling!
https://joelvonrotz.ch/writing/sewing-a-framebag/
#myog #bikepacking #biketouring #biketooter #biketoot #100DaysToOffload
