#esp32poe — Public Fediverse posts

Adding 433MHz RC-switched solar lights to Home Assistant with ESPHome

I built an ESPHome controller for remote-controlled solar festoon lights using as ESP32-POE and an FS1000A 433MHz tranceiver.

tl;dr:

* The Generic-Remote model with House Codes and Tri-State translates to a rc_switch_raw

* The ESPHome/Home Assistant component can be incrementally assembled from basic button actions.

* Don’t forget the antenna (17.3cm)

Adding 433MHz RC-switched solar lights to Home Assistant with ESPHome

I built an ESPHome controller for remote-controlled solar festoon lights using as ESP32-POE and an FS1000A 433MHz tranceiver.

tl;dr:

* The Generic-Remote model with House Codes and Tri-State translates to an rc_switch_raw protocol.

* The ESPHome/Home Assistant component can be incrementally assembled from basic button actions.

* Don’t forget the antenna (17.3cm)

Adding 433MHz RC-switched solar lights to Home Assistant with ESPHome

I built an ESPHome controller for remote-controlled solar festoon lights using as ESP32-POE and an FS1000A 433MHz tranceiver.

tl;dr:

* The Generic-Remote model with House Codes and Tri-State translates to an rc_switch_raw protocol.

* The ESPHome/Home Assistant component can be incrementally assembled from basic button actions.

* Don’t forget the antenna (17.3cm)

Adding 433MHz RC-switched solar lights to Home Assistant with ESPHome

I built an ESPHome controller for remote-controlled solar festoon lights using as ESP32-POE and an FS1000A 433MHz tranceiver.

tl;dr:

* The Generic-Remote model with House Codes and Tri-State translates to a rc_switch_raw

* The ESPHome/Home Assistant component can be incrementally assembled from basic button actions.

* Don’t forget the antenna (17.3cm)

Adding 433MHz RC-switched solar lights to Home Assistant with ESPHome

I built an ESPHome controller for remote-controlled solar festoon lights using as ESP32-POE and an FS1000A 433MHz tranceiver.

tl;dr:

* The Generic-Remote model with House Codes and Tri-State translates to an rc_switch_raw protocol.

* The ESPHome/Home Assistant component can be incrementally assembled from basic button actions.

* Don’t forget the antenna (17.3cm)