#ldo — Public Fediverse posts

#voron #ldo #3dprinting #electronics

marginally_constructive @[email protected] · 2026-06-02 · 22:04 UTC

I like my 3D printers like I like my marshmallows: Not burning!

This solid state relay specifically says to "earth the mounting rail". However, in this Voron build, the DIN mounting rails are held by well insulating, 3D printed brackets, and the LDO kit does not include a PE connection.

So I crimped my own!

#voron #ldo #3dprinting #electronics

marginally_constructive @[email protected] · 2026-06-02 · 22:04 UTC

I like my 3D printers like I like my marshmallows: Not burning!

This solid state relay specifically says to "earth the mounting rail". However, in this Voron build, the DIN mounting rails are held by well insulating, 3D printed brackets, and the LDO kit does not include a PE connection.

So I crimped my own!

#voron #ldo #3dprinting #electronics

marginally_constructive @[email protected] · 2026-06-02 · 22:04 UTC

I like my 3D printers like I like my marshmallows: Not burning!

This solid state relay specifically says to "earth the mounting rail". However, in this Voron build, the DIN mounting rails are held by well insulating, 3D printed brackets, and the LDO kit does not include a PE connection.

So I crimped my own!

#electronics #3dprinting #ldo #voron

marginally_constructive @[email protected] · 2026-06-02 · 22:04 UTC

I like my 3D printers like I like my marshmallows: Not burning!

This solid state relay specifically says to "earth the mounting rail". However, in this Voron build, the DIN mounting rails are held by well insulating, 3D printed brackets, and the LDO kit does not include a PE connection.

So I crimped my own!

https://outraspalavras.net/crise-brasileira/por-que-o-governo-teima-em-apertar-o-cinto/

#voron #ldo #3dprinting #electronics

Outras Palavras @[email protected] · 2026-06-02 · 20:08 UTC

Por que o governo teima em “apertar o cinto”?

Lula precisa mostrar serviço, em ano decisivo. Uma correção do valor do Bolsa Família, por exemplo. Fazenda insiste em meta irreal de superávit. Mas só abril desperdiçou três vezes mais em juros da dívida do que pretende “economizar” em gastos sociais em 2026

#areassociaias #areassociais #austeridade #bancocentral #beneficiosprevidenciarios #bolsafamilia

Outras Palavras @[email protected] · 2026-06-02 · 20:08 UTC

Por que o governo teima em “apertar o cinto”?

Lula precisa mostrar serviço, em ano decisivo. Uma correção do valor do Bolsa Família, por exemplo. Fazenda insiste em meta irreal de superávit. Mas só abril desperdiçou três vezes mais em juros da dívida do que pretende “economizar” em gastos sociais em 2026

https://outraspalavras.net/crise-brasileira/por-que-o-governo-teima-em-apertar-o-cinto/

#areassociaias #areassociais #austeridade #bancocentral #beneficiosprevidenciarios #bolsafamilia

marginally_constructive @[email protected] · 2026-06-01 · 21:20 UTC

Suddenly, a wild LDO Nitehawk USB adapter appears in the LDO wiring guide. However, the preparation of this part doesn't seem to be documented.

Here are the parts I used for assembly:

- 3 x M3x12 SHCS
- 2 x M2x10 self tapping screw
- https://github.com/MotorDynamicsLab/Nitehawk-SB/blob/master/STLs/usb_adapter_mount.stl
- https://github.com/VoronDesign/Voron-Trident/blob/main/STLs/ElectronicsBay/pcb_din_clip_x3.stl

As always, don't overtighten!

#voron #trident #ldo #nitehawk

marginally_constructive @[email protected] · 2026-06-01 · 21:20 UTC

Suddenly, a wild LDO Nitehawk USB adapter appears in the LDO wiring guide. However, the preparation of this part doesn't seem to be documented.

Here are the parts I used for assembly:

- 3 x M3x12 SHCS
- 2 x M2x10 self tapping screw
- https://github.com/MotorDynamicsLab/Nitehawk-SB/blob/master/STLs/usb_adapter_mount.stl
- https://github.com/VoronDesign/Voron-Trident/blob/main/STLs/ElectronicsBay/pcb_din_clip_x3.stl

As always, don't overtighten!

#voron #trident #ldo #nitehawk

marginally_constructive @[email protected] · 2026-06-01 · 21:20 UTC

Suddenly, a wild LDO Nitehawk USB adapter appears in the LDO wiring guide. However, the preparation of this part doesn't seem to be documented.

Here are the parts I used for assembly:

- 3 x M3x12 SHCS
- 2 x M2x10 self tapping screw
- https://github.com/MotorDynamicsLab/Nitehawk-SB/blob/master/STLs/usb_adapter_mount.stl
- https://github.com/VoronDesign/Voron-Trident/blob/main/STLs/ElectronicsBay/pcb_din_clip_x3.stl

As always, don't overtighten!

#voron #trident #ldo #nitehawk

marginally_constructive @[email protected] · 2026-06-01 · 21:20 UTC

Suddenly, a wild LDO Nitehawk USB adapter appears in the LDO wiring guide. However, the preparation of this part doesn't seem to be documented.

Here are the parts I used for assembly:

- 3 x M3x12 SHCS
- 2 x M2x10 self tapping screw
- https://github.com/MotorDynamicsLab/Nitehawk-SB/blob/master/STLs/usb_adapter_mount.stl
- https://github.com/VoronDesign/Voron-Trident/blob/main/STLs/ElectronicsBay/pcb_din_clip_x3.stl

As always, don't overtighten!

#nitehawk #ldo #trident #voron

marginally_constructive @[email protected] · 2026-06-01 · 21:20 UTC

Suddenly, a wild LDO Nitehawk USB adapter appears in the LDO wiring guide. However, the preparation of this part doesn't seem to be documented.

Here are the parts I used for assembly:

- 3 x M3x12 SHCS
- 2 x M2x10 self tapping screw
- https://github.com/MotorDynamicsLab/Nitehawk-SB/blob/master/STLs/usb_adapter_mount.stl
- https://github.com/VoronDesign/Voron-Trident/blob/main/STLs/ElectronicsBay/pcb_din_clip_x3.stl

As always, don't overtighten!

https://fed.brid.gy/r/https://www.brasildefato.com.br/colunista/boletim-ponto/2026/05/22/direita-rachadinha/

#voron #trident #ldo #nitehawk

Brasil de Fato [Unofficial] @[email protected] · 2026-05-22 · 15:08 UTC

Direita rachadinha

#anpd #bigtechs #centrao #cironogueira #corrupcao #darkhorse

Brasil de Fato [Unofficial] @[email protected] · 2026-05-22 · 15:08 UTC

Direita rachadinha

https://fed.brid.gy/r/https://www.brasildefato.com.br/colunista/boletim-ponto/2026/05/22/direita-rachadinha/

#wifipublico #vorcaro #terceiravia #stf #ruralistas #ricardonunes

marginally_constructive @[email protected] · 2026-05-07 · 20:13 UTC

I just learned, that LDO included mounting bars for the linear rails, which seem to be much better than the default roll-in nuts.

However, in contrast to the roll-in nuts, the mounting bars have to be installed _before_ mounting the extrusions. Unfortunately, this is not documented in the LDO notes for the kit.

Well, since "practice" means doing something over and over again...

marginally_constructive @[email protected] · 2026-05-07 · 20:13 UTC

I just learned, that LDO included mounting bars for the linear rails, which seem to be much better than the default roll-in nuts.

However, in contrast to the roll-in nuts, the mounting bars have to be installed _before_ mounting the extrusions. Unfortunately, this is not documented in the LDO notes for the kit.

Well, since "practice" means doing something over and over again...

marginally_constructive @[email protected] · 2026-05-07 · 20:13 UTC

I just learned, that LDO included mounting bars for the linear rails, which seem to be much better than the default roll-in nuts.

However, in contrast to the roll-in nuts, the mounting bars have to be installed _before_ mounting the extrusions. Unfortunately, this is not documented in the LDO notes for the kit.

Well, since "practice" means doing something over and over again...

marginally_constructive @[email protected] · 2026-05-07 · 20:13 UTC

I just learned, that LDO included mounting bars for the linear rails, which seem to be much better than the default roll-in nuts.

However, in contrast to the roll-in nuts, the mounting bars have to be installed _before_ mounting the extrusions. Unfortunately, this is not documented in the LDO notes for the kit.

Well, since "practice" means doing something over and over again...

#linearrail #ldo #voron

marginally_constructive @[email protected] · 2026-05-07 · 20:13 UTC

I just learned, that LDO included mounting bars for the linear rails, which seem to be much better than the default roll-in nuts.

However, in contrast to the roll-in nuts, the mounting bars have to be installed _before_ mounting the extrusions. Unfortunately, this is not documented in the LDO notes for the kit.

Well, since "practice" means doing something over and over again...