home.social

#carrepair — Public Fediverse posts

Live and recent posts from across the Fediverse tagged #carrepair, aggregated by home.social.

  1. Found a use for #ReformUK flyer - over the months anodised red outer rims of my #alloy #wheels got scuffed (one corner particularly bad due to dodging large pothole and clouting kerb (alternative of going through hole would have likely knackered wheel bearing I spent 5 hours replacing last year, or some other suspension component)

    Also some kerb rash on rear wheel (pictured).

    I'd kept the touch up paint from my previous VW Polo and luckily this is not a bad match to the red (not 100% perfect as its near impossible to match the anodised finish, but better than looking at gnarled up alloy with raw metal exposed)

    #CarRepair #bladibarsket

  2. Found a use for #ReformUK flyer - over the months anodised red outer rims of my #alloy #wheels got scuffed (one corner particularly bad due to dodging large pothole and clouting kerb (alternative of going through hole would have likely knackered wheel bearing I spent 5 hours replacing last year, or some other suspension component)

    Also some kerb rash on rear wheel (pictured).

    I'd kept the touch up paint from my previous VW Polo and luckily this is not a bad match to the red (not 100% perfect as its near impossible to match the anodised finish, but better than looking at gnarled up alloy with raw metal exposed)

    #CarRepair #bladibarsket

  3. Found a use for #ReformUK flyer - over the months anodised red outer rims of my #alloy #wheels got scuffed (one corner particularly bad due to dodging large pothole and clouting kerb (alternative of going through hole would have likely knackered wheel bearing I spent 5 hours replacing last year, or some other suspension component)

    Also some kerb rash on rear wheel (pictured).

    I'd kept the touch up paint from my previous VW Polo and luckily this is not a bad match to the red (not 100% perfect as its near impossible to match the anodised finish, but better than looking at gnarled up alloy with raw metal exposed)

    #CarRepair #bladibarsket

  4. Found a use for #ReformUK flyer - over the months anodised red outer rims of my #alloy #wheels got scuffed (one corner particularly bad due to dodging large pothole and clouting kerb (alternative of going through hole would have likely knackered wheel bearing I spent 5 hours replacing last year, or some other suspension component)

    Also some kerb rash on rear wheel (pictured).

    I'd kept the touch up paint from my previous VW Polo and luckily this is not a bad match to the red (not 100% perfect as its near impossible to match the anodised finish, but better than looking at gnarled up alloy with raw metal exposed)

    #CarRepair #bladibarsket

  5. Found a use for #ReformUK flyer - over the months anodised red outer rims of my #alloy #wheels got scuffed (one corner particularly bad due to dodging large pothole and clouting kerb (alternative of going through hole would have likely knackered wheel bearing I spent 5 hours replacing last year, or some other suspension component)

    Also some kerb rash on rear wheel (pictured).

    I'd kept the touch up paint from my previous VW Polo and luckily this is not a bad match to the red (not 100% perfect as its near impossible to match the anodised finish, but better than looking at gnarled up alloy with raw metal exposed)

    #CarRepair #bladibarsket

  6. Yesterday I took the little #MGTF out for the first time this year (issues with my back did not allow me to use it since mid-September of last year). It was a nice trip and the car ran very well, apart that my previous repair on the door handle broke again. I should try to fix that again this week. #carrepair #MG #TF #car

  7. Yesterday I took the little #MGTF out for the first time this year (issues with my back did not allow me to use it since mid-September of last year). It was a nice trip and the car ran very well, apart that my previous repair on the door handle broke again. I should try to fix that again this week. #carrepair #MG #TF #car

  8. Yesterday I took the little #MGTF out for the first time this year (issues with my back did not allow me to use it since mid-September of last year). It was a nice trip and the car ran very well, apart that my previous repair on the door handle broke again. I should try to fix that again this week. #carrepair #MG #TF #car

  9. Yesterday I took the little #MGTF out for the first time this year (issues with my back did not allow me to use it since mid-September of last year). It was a nice trip and the car ran very well, apart that my previous repair on the door handle broke again. I should try to fix that again this week. #carrepair #MG #TF #car

  10. Yesterday I took the little #MGTF out for the first time this year (issues with my back did not allow me to use it since mid-September of last year). It was a nice trip and the car ran very well, apart that my previous repair on the door handle broke again. I should try to fix that again this week. #carrepair #MG #TF #car

  11. I installed a metal impact protection plate for the oil cooler on @LeoBurr BMW M2 as well as doing a differential service. Now Burrs can have big Altima energy without damaging the oil cooler. 🐻‍❄🤣 Now for lunch noms. 🐻‍❄🍽
    #CarRepair #automechanics

  12. DIY Car Door Lock Actuator Repair: Save Money with This Simple Fix!

    Stop replacing expensive parts! In this video, I'll show you how to cheaply repair your car door lock actuator by simply cleaning the internal switch. This easy DIY hack can save you hundreds in repair costs and get your door locks working perfectly again in no time. Perfect for car owners looking for a quick and effective maintenance tip!

    #CarRepair #DIYAuto #DoorLockFix #CarMaintenance #AutoRepair #SaveMoney #MechanicTips

  13. Went to start work on the old Dax Rush today. It's been out under a waterproof car cover for... a while. I need to drag it back under the car port and get working on it!

    One wheel/brake disc is stuck ☹️ And I have lost the locking nut key 😥 so can't get to it. Grr.

    Are any of those cheap twist socket sets any good for wrenching old locknuts off?
    #CarRepair

  14. 𝗛𝗼𝘄 𝗠𝗶𝘀𝗺𝗮𝘁𝗰𝗵𝗲𝗱 𝗧𝘆𝗿𝗲𝘀 𝗗𝗲𝘀𝘁𝗿𝗼𝘆 𝗬𝗼𝘂𝗿 𝗖𝗮𝗿: 𝗔𝘃𝗼𝗶𝗱 𝗧𝗵𝗲 𝗨𝗞 𝗠𝗢𝗧 𝗧𝗿𝗮𝗽
    𝖳𝗁𝖾 𝖯𝖾𝗋𝗂𝗅𝗌 𝗈𝖿 𝖬𝗂𝗌𝗆𝖺𝗍𝖼𝗁𝖾𝖽 𝖳𝗒𝗋𝖾𝗌: 𝖴𝖪 𝖫𝖺𝗐 𝗏𝗌. 𝖤𝗇𝗀𝗂𝗇𝖾𝖾𝗋𝗂𝗇𝗀 𝖲𝖺𝖿𝖾𝗍𝗒

    youtu.be/2xRG7orE5Vs

    #CarMaintenanceUK #TyreSafety #AWD #MechanicTips #MOT #DrivingSafety #UKRoads #CarRepair #AutomotiveEngineering #UKMechanic

  15. 𝗛𝗼𝘄 𝗠𝗶𝘀𝗺𝗮𝘁𝗰𝗵𝗲𝗱 𝗧𝘆𝗿𝗲𝘀 𝗗𝗲𝘀𝘁𝗿𝗼𝘆 𝗬𝗼𝘂𝗿 𝗖𝗮𝗿: 𝗔𝘃𝗼𝗶𝗱 𝗧𝗵𝗲 𝗨𝗞 𝗠𝗢𝗧 𝗧𝗿𝗮𝗽
    𝖳𝗁𝖾 𝖯𝖾𝗋𝗂𝗅𝗌 𝗈𝖿 𝖬𝗂𝗌𝗆𝖺𝗍𝖼𝗁𝖾𝖽 𝖳𝗒𝗋𝖾𝗌: 𝖴𝖪 𝖫𝖺𝗐 𝗏𝗌. 𝖤𝗇𝗀𝗂𝗇𝖾𝖾𝗋𝗂𝗇𝗀 𝖲𝖺𝖿𝖾𝗍𝗒

    youtu.be/2xRG7orE5Vs

    #CarMaintenanceUK #TyreSafety #AWD #MechanicTips #MOT #DrivingSafety #UKRoads #CarRepair #AutomotiveEngineering #UKMechanic

  16. 𝗛𝗼𝘄 𝗠𝗶𝘀𝗺𝗮𝘁𝗰𝗵𝗲𝗱 𝗧𝘆𝗿𝗲𝘀 𝗗𝗲𝘀𝘁𝗿𝗼𝘆 𝗬𝗼𝘂𝗿 𝗖𝗮𝗿: 𝗔𝘃𝗼𝗶𝗱 𝗧𝗵𝗲 𝗨𝗞 𝗠𝗢𝗧 𝗧𝗿𝗮𝗽
    𝖳𝗁𝖾 𝖯𝖾𝗋𝗂𝗅𝗌 𝗈𝖿 𝖬𝗂𝗌𝗆𝖺𝗍𝖼𝗁𝖾𝖽 𝖳𝗒𝗋𝖾𝗌: 𝖴𝖪 𝖫𝖺𝗐 𝗏𝗌. 𝖤𝗇𝗀𝗂𝗇𝖾𝖾𝗋𝗂𝗇𝗀 𝖲𝖺𝖿𝖾𝗍𝗒

    youtu.be/2xRG7orE5Vs

    #CarMaintenanceUK #TyreSafety #AWD #MechanicTips #MOT #DrivingSafety #UKRoads #CarRepair #AutomotiveEngineering #UKMechanic

  17. 𝗛𝗼𝘄 𝗠𝗶𝘀𝗺𝗮𝘁𝗰𝗵𝗲𝗱 𝗧𝘆𝗿𝗲𝘀 𝗗𝗲𝘀𝘁𝗿𝗼𝘆 𝗬𝗼𝘂𝗿 𝗖𝗮𝗿: 𝗔𝘃𝗼𝗶𝗱 𝗧𝗵𝗲 𝗨𝗞 𝗠𝗢𝗧 𝗧𝗿𝗮𝗽
    𝖳𝗁𝖾 𝖯𝖾𝗋𝗂𝗅𝗌 𝗈𝖿 𝖬𝗂𝗌𝗆𝖺𝗍𝖼𝗁𝖾𝖽 𝖳𝗒𝗋𝖾𝗌: 𝖴𝖪 𝖫𝖺𝗐 𝗏𝗌. 𝖤𝗇𝗀𝗂𝗇𝖾𝖾𝗋𝗂𝗇𝗀 𝖲𝖺𝖿𝖾𝗍𝗒

    youtu.be/2xRG7orE5Vs

    #CarMaintenanceUK #TyreSafety #AWD #MechanicTips #MOT #DrivingSafety #UKRoads #CarRepair #AutomotiveEngineering #UKMechanic

  18. Took my car to the dealer for a complimentary annual maintence today.

    They told me the cabin air filter was not covered and it needed to be replaced, they did show me a very dirty filter before asking if I wanted them to replace it.

    I agreed in the moment to the $117 cost. I think it was about 50% parts and 50% labor.

    But I've now looked it up, and it's an incredibly simple thing to replace and is a $20 part. So never again.

    #carRepair #cardealer

  19. Going through some old boxes of stuff, I've found two slim documents written by my dad in his days as an engineering student.

    These are some pages from the first one. I think this must have been something he did for his first year practical work. (The reference to army leave was national service, taken before his degree).

    #FamilyHistory #Cars #CarRepair #Engineering #MechEng

  20. Want a car restoration project?

    There is a VW Beetle available.
    And a second for parts.
    Not running.
    A little rust.
    Quick repair.

    #Perth #CarRestoration #VehicleRepair #CarRepair

  21. The Mechanic WordPress Theme by @visualmodo is the ultimate engine for auto repair & garage websites.

    🛠️ 1-Click Demo Import
    💰 $150+ in Premium Plugins FREE
    📱 Fully Responsive & SEO Ready
    🖱️ No-Code Drag & Drop

    Shift into high gear:
    🔗 visualmodo.com/theme/mechanic-

    #WordPress #Mechanic #CarRepair #WebDesign #SmallBiz #AutoService

  22. The Mechanic WordPress Theme by @visualmodo is the ultimate engine for auto repair & garage websites.

    🛠️ 1-Click Demo Import
    💰 $150+ in Premium Plugins FREE
    📱 Fully Responsive & SEO Ready
    🖱️ No-Code Drag & Drop

    Shift into high gear:
    🔗 visualmodo.com/theme/mechanic-

    #WordPress #Mechanic #CarRepair #WebDesign #SmallBiz #AutoService

  23. Cross-posting this here in case there are any Car-stodon folks who have a thought as to what could be wrong.

    '96 Toyota 4Runner with the v6, crank no start. When the key is in the ACC position the engine makes a constant clicking sound (in the video you can hear it.)

    reddit.com/r/3rdGen4Runner/s/j

    #CrankNoStart #Toyota #5vzfe #CarRepair #mechanicadvice

  24. Looks like the #Renault #Scenic 2 is leaking oil.

    I was able to confirm my gearbox reverse light switch repair and gearbox oil change are not the source of this (gearbox still full, lowest spot of the engine is just at the gearbox darin plug thats why the oil goes there).

    Cleaned the accessible bottom part of the engine, found that the gaskets of the oil stick failed so ordered a new one and found out that the oil is actually coming right from the top of the engine. To access this part, a special nut and a new air inlet gasket are required. Waiting for those now...

    According to some online sources, the screws that hold on the cover are not sealed/tend to leak around the screw head. So just removing one at a time, cleaning the surface and reassembling them with a bit of "gasket maker" could fix this. Cleaning is useful anyways to find out where exactly the oil comes from if this does not fix it.

    #carrepair #beater #AutoRepair #frenchcar

  25. Looks like the #Renault #Scenic 2 is leaking oil.

    I was able to confirm my gearbox reverse light switch repair and gearbox oil change are not the source of this (gearbox still full, lowest spot of the engine is just at the gearbox darin plug thats why the oil goes there).

    Cleaned the accessible bottom part of the engine, found that the gaskets of the oil stick failed so ordered a new one and found out that the oil is actually coming right from the top of the engine. To access this part, a special nut and a new air inlet gasket are required. Waiting for those now...

    According to some online sources, the screws that hold on the cover are not sealed/tend to leak around the screw head. So just removing one at a time, cleaning the surface and reassembling them with a bit of "gasket maker" could fix this. Cleaning is useful anyways to find out where exactly the oil comes from if this does not fix it.

    #carrepair #beater #AutoRepair #frenchcar

  26. Looks like the #Renault #Scenic 2 is leaking oil.

    I was able to confirm my gearbox reverse light switch repair and gearbox oil change are not the source of this (gearbox still full, lowest spot of the engine is just at the gearbox darin plug thats why the oil goes there).

    Cleaned the accessible bottom part of the engine, found that the gaskets of the oil stick failed so ordered a new one and found out that the oil is actually coming right from the top of the engine. To access this part, a special nut and a new air inlet gasket are required. Waiting for those now...

    According to some online sources, the screws that hold on the cover are not sealed/tend to leak around the screw head. So just removing one at a time, cleaning the surface and reassembling them with a bit of "gasket maker" could fix this. Cleaning is useful anyways to find out where exactly the oil comes from if this does not fix it.

    #carrepair #beater #AutoRepair #frenchcar

  27. Looks like the #Renault #Scenic 2 is leaking oil.

    I was able to confirm my gearbox reverse light switch repair and gearbox oil change are not the source of this (gearbox still full, lowest spot of the engine is just at the gearbox darin plug thats why the oil goes there).

    Cleaned the accessible bottom part of the engine, found that the gaskets of the oil stick failed so ordered a new one and found out that the oil is actually coming right from the top of the engine. To access this part, a special nut and a new air inlet gasket are required. Waiting for those now...

    According to some online sources, the screws that hold on the cover are not sealed/tend to leak around the screw head. So just removing one at a time, cleaning the surface and reassembling them with a bit of "gasket maker" could fix this. Cleaning is useful anyways to find out where exactly the oil comes from if this does not fix it.

    #carrepair #beater #AutoRepair #frenchcar

  28. Looks like the 2 is leaking oil.

    I was able to confirm my gearbox reverse light switch repair and gearbox oil change are not the source of this (gearbox still full, lowest spot of the engine is just at the gearbox darin plug thats why the oil goes there).

    Cleaned the accessible bottom part of the engine, found that the gaskets of the oil stick failed so ordered a new one and found out that the oil is actually coming right from the top of the engine. To access this part, a special nut and a new air inlet gasket are required. Waiting for those now...

    According to some online sources, the screws that hold on the cover are not sealed/tend to leak around the screw head. So just removing one at a time, cleaning the surface and reassembling them with a bit of "gasket maker" could fix this. Cleaning is useful anyways to find out where exactly the oil comes from if this does not fix it.

  29. I needed to change the bulbs in my headlights… so obviously that means I have to remove the entire front of the car to access them..
    #AutoRepair #CarRepair #cars

  30. Kỹ thuật viên lâu năm tại Arkansas, Mỹ kiện hãng KIA sau khi bị thương nặng trong lúc sửa chiếc KIA Soul 2012. Anh cho rằng thiết kế hoặc hướng dẫn sửa chữa của hãng thiếu an toàn, dẫn đến tai nạn. Vụ việc đang được điều tra, làm dấy lên lo ngại về an toàn lao động trong ngành sửa chữa ô tô.

    #KIA #Autotech #CarRepair #WorkplaceSafety #XeHơi #SửaXe #AnToànLaoĐộng #KỹThuậtViên #KIAVietnam #VietnamNet

    vietnamnet.vn/ky-thuat-vien-la

  31. Today's catch: Alfa Romeo 156 subframe, complete with anti-rollbar and with some rusty lower wishbones to go.

    In my experience, the most consistent thing about car repairs is that you expect certain problems along the way, but the by far hardest part is always something you totally did not expect at all.

    When working under the car, you expect tightly rusted bolts and grime. There were a couple of tight bolts here but nothing out of the ordinary. What I did not expect is the amount of trouble getting this 20-30kg piece down. Getting it back in place is no doubt going to be fun, but you'd think it would come *down*, right? Not this one, strangely tangled in the rest of the suspension. Probably missing a trick or two here, this being the first time for me.

    As a side note, I've been warily eyeballing those lower wishbones for years now, expecting the MOT engineer to complain about them, but they were a ridiculously tight fit still. Going to replace them nevertheless, along with the anti-rollbar bushings, while going through all this trouble...

    #carrepair #alfaromeo #alfa156

  32. Today's catch: Alfa Romeo 156 subframe, complete with anti-rollbar and with some rusty lower wishbones to go.

    In my experience, the most consistent thing about car repairs is that you expect certain problems along the way, but the by far hardest part is always something you totally did not expect at all.

    When working under the car, you expect tightly rusted bolts and grime. There were a couple of tight bolts here but nothing out of the ordinary. What I did not expect is the amount of trouble getting this 20-30kg piece down. Getting it back in place is no doubt going to be fun, but you'd think it would come *down*, right? Not this one, strangely tangled in the rest of the suspension. Probably missing a trick or two here, this being the first time for me.

    As a side note, I've been warily eyeballing those lower wishbones for years now, expecting the MOT engineer to complain about them, but they were a ridiculously tight fit still. Going to replace them nevertheless, along with the anti-rollbar bushings, while going through all this trouble...

    #carrepair #alfaromeo #alfa156

  33. Today's catch: Alfa Romeo 156 subframe, complete with anti-rollbar and with some rusty lower wishbones to go.

    In my experience, the most consistent thing about car repairs is that you expect certain problems along the way, but the by far hardest part is always something you totally did not expect at all.

    When working under the car, you expect tightly rusted bolts and grime. There were a couple of tight bolts here but nothing out of the ordinary. What I did not expect is the amount of trouble getting this 20-30kg piece down. Getting it back in place is no doubt going to be fun, but you'd think it would come *down*, right? Not this one, strangely tangled in the rest of the suspension. Probably missing a trick or two here, this being the first time for me.

    As a side note, I've been warily eyeballing those lower wishbones for years now, expecting the MOT engineer to complain about them, but they were a ridiculously tight fit still. Going to replace them nevertheless, along with the anti-rollbar bushings, while going through all this trouble...

    #carrepair #alfaromeo #alfa156

  34. Today's catch: Alfa Romeo 156 subframe, complete with anti-rollbar and with some rusty lower wishbones to go.

    In my experience, the most consistent thing about car repairs is that you expect certain problems along the way, but the by far hardest part is always something you totally did not expect at all.

    When working under the car, you expect tightly rusted bolts and grime. There were a couple of tight bolts here but nothing out of the ordinary. What I did not expect is the amount of trouble getting this 20-30kg piece down. Getting it back in place is no doubt going to be fun, but you'd think it would come *down*, right? Not this one, strangely tangled in the rest of the suspension. Probably missing a trick or two here, this being the first time for me.

    As a side note, I've been warily eyeballing those lower wishbones for years now, expecting the MOT engineer to complain about them, but they were a ridiculously tight fit still. Going to replace them nevertheless, along with the anti-rollbar bushings, while going through all this trouble...

    #carrepair #alfaromeo #alfa156

  35. The lift height of Quickjack, in combination with a garage creeper is such a game changer. Working under the car is suddenly almost pleasant, and so is getting in and out of there.

    Spent some quality time down there preparing to lower the front subframe of one of our Alfa 156's, wrestling with stuck bolts of various sizes. And actually looking forward to continue tomorrow.

    #quickjack #carrepair

  36. Stresses I did not want to deal with today. The tire I had repaired the rim bent again. Now I need to look at getting a new rim and new tires. That’s going to be an expensive time.
    #CarRepair #CarMaintenance

  37. Monday morning spark plugs and coils replacement with upper timing covers reseal. Nice gravy work to start off the short week. 🐻‍❄🛻🔧
    #automechanics #CarRepair

  38. Chủ xe Toyota Corolla 2020 bất ngờ khi nhận báo giá sửa chữa gần 10.120 USD (hơn 250 triệu đồng) chỉ vì lỗi rò rỉ nước làm mát. Vụ việc khiến nhiều người lo ngại về chi phí bảo dưỡng ô tô tại đại lý chính hãng. #ToyotaCorolla #OtoVietnam #BaoDuongOto #XeHoi #Corolla2020 #Oto #SuaChuaOto #XeHơi #Toytota #CarMaintenance #CarRepair #VietnamCar

    vietnamnet.vn/toyota-corolla-2