Search
396 results for “drfootleg”
-
It finally completed at 1:30AM. Many filament unload fails resulting in some layers being printed in the wrong colours as the selector failed to move due to filament not being retracted enough for it to clear the selector. Need to work on a solution for that, and detection so it can pause if it occurs. #ERCFv3 #3dprinting
-
After a break to play with my Christmas zigbee gadgets I am back to attempting to tame the ERCF v3 with a 4 colour 3Dbenchy. It has got further than ever before, but has still needed regular interventions. #ERCFv3
-
-
-
Filament blocks fully assembled and contact surfaces filed to ensure none of these stick down. A lot of work but as I learned with the v2 build, getting these moving cleanly is critical to successful operation. #ERCFv3
-
Building my ERCFv3 today, using my CrowView with Pi5 laptop to view the build manual. #3dprinting #ERCFv3 #MakerMonday <- well #MakerXmas all week really
-
Arrived in the city for the #SMRRF this weekend. Manchester weather doesn’t disappoint!
-
Steady progress on the Deathracer build while I’ve been unwell these past 3 days. I’m at the stage of working out where I used longer screws than I should have as I run out of them but have loads of shorter ones left from the kit (which has no instructions). Also reprinting several parts where the holes were too large for screw threads to bite in them. #3dprinting #SMRRF
-
Deathracer build was going well until on the 4th axle (of 4) the drill bit bound so tightly in the 50mm deep hole I had to drill out that it snapped when I tried to reverse drive it back out. So now I need to reprint that part and try again. #smrrf #3dprinting
-
It appears I am now building a #DeathRacer for #SMRRF (assuming the parts kit arrives in time!)
https://www.youtube.com/playlist?list=PLMo89umUV98rdeB4_8urxc9-Vu1SL9mGF -
-
@piofthings This is the Voron R0.2 kit from http://siboor.com who I met at the #SMRRF in December. I am really impressed with the kit for the money. Came with all 3D printed parts included and the print quality is excellent.
-
@andypiper I’ve been driving past Oxford for years on my way from Cambridge to various caving trips, but this was the first time I’ve been able to spend time in the city. Some beautiful buildings. We had two amazing days at #SMRRF
-
Nat, Rob and I have had an absolute blast these past 2 days at #SMRRF Today was a little less busy so I found lots of time to speak to other exhibitors and buy cool stuff.
-
Took a lovely peaceful 30 minute walk around Oxford city centre before the start of day 2 at #SMRRF
-
Great first day at the #SMRRF in Oxford, UK today. This was our stand surrounded by professional content creators and companies.
-
What an excellent day! Morning spent running my monthly kids coding session at local library. Several new faces and all enjoyed their experience. Then straight over to Cambridge for the #camjam #RaspberryPi birthday party jam. Met loads of good friends and talked to many interesting people. So busy I didn’t take any pictures all day.
-
Sat on a sofa in a Yorkshire caving hut tonight after a couple of pints in the pub at the end of day 1 of a cave surveying meetup. Half the room are messing with cave survey data on their laptops. The room is alive with chatter. Someone is playing acoustic guitar. Life doesn't get much better than this. #HappyPlace #Goodtimes
-
A tough 24 hours in world politics. Rather than make them listen to the news on the school run, I asked my daughter to pick some music. So we listened to Dwarfish Rock all the way to school. A new genre for me, but it lifted all our moods! #DiggyDiggyHole
-
Success! Hard won over 29 hours with my #ERCFv3 on my #Voron Trident AWD 350.
No false filament runouts triggered, so my redesign of the hot-end switch is working. Just a few clogs, the usual filament unload fails and a blocked nozzle which I dealt with by just putting a new nozzle on. Amazed I saved this after so long on the print bed. -
Success! Hard won over 29 hours with my #ERCFv3 on my #Voron Trident AWD 350.
No false filament runouts triggered, so my redesign of the hot-end switch is working. Just a few clogs, the usual filament unload fails and a blocked nozzle which I dealt with by just putting a new nozzle on. Amazed I saved this after so long on the print bed. -
Success! Hard won over 29 hours with my #ERCFv3 on my #Voron Trident AWD 350.
No false filament runouts triggered, so my redesign of the hot-end switch is working. Just a few clogs, the usual filament unload fails and a blocked nozzle which I dealt with by just putting a new nozzle on. Amazed I saved this after so long on the print bed. -
Success! Hard won over 29 hours with my #ERCFv3 on my #Voron Trident AWD 350.
No false filament runouts triggered, so my redesign of the hot-end switch is working. Just a few clogs, the usual filament unload fails and a blocked nozzle which I dealt with by just putting a new nozzle on. Amazed I saved this after so long on the print bed. -
I think my new hot-end rebuild has passed the test. Really happy with this result. #3dprinting #voron #ERCFv3
-
I think my new hot-end rebuild has passed the test. Really happy with this result. #3dprinting #voron #ERCFv3
-
I think my new hot-end rebuild has passed the test. Really happy with this result. #3dprinting #voron #ERCFv3
-
I think my new hot-end rebuild has passed the test. Really happy with this result. #3dprinting #voron #ERCFv3
-
New customised Hot-end reassembled and working. So far it is all behaving. #Voron #3dprinting
-
New customised Hot-end reassembled and working. So far it is all behaving. #Voron #3dprinting