#voron — Public Fediverse posts

It looks like a real 3D printer now!

#voron #3dprinting

I completed the assembly of the StealthBurner toolhead - isn't it beautiful?

I'm impressed by the engineering that went into this toolhead, it was fun to assemble!

#voron #StealthBurner #3dprinting

The manual says to remove the cover of the 5015 radial fan and "clip off and file down the stock mounting ears".

How barbaric... however, it's done!

#voron #StealthBurner

Four years on and still printing strong! Our trusty Voron V0 is finally getting some TLC - a replacement of the extruder motor wiring marks the beginning of its next chapter. Anyone else's 3D printer aging like a fine machine? #VoronV0 #MaintenanceMode #3dprinting #3dprinter #voron

I installed the print bed at my #voron trident. This thing is massive!

This 10 mm thick aluminium piece measures 300 mm x 300 mm and weighs 3,1 kg.

I added a glass surface from my #Ender3 for comparison...

#3dprinting

I installed the print bed at my #voron trident. This thing is massive!

This 10 mm thick aluminium piece measures 300 mm x 300 mm and weighs 3,1 kg.

I added a glass surface from my #Ender3 for comparison...

#3dprinting

I installed the print bed at my #voron trident. This thing is massive!

This 10 mm thick aluminium piece measures 300 mm x 300 mm and weighs 3,1 kg.

I added a glass surface from my #Ender3 for comparison...

#3dprinting

I installed the print bed at my #voron trident. This thing is massive!

This 10 mm thick aluminium piece measures 300 mm x 300 mm and weighs 3,1 kg.

I added a glass surface from my #Ender3 for comparison...

#3dprinting

An blunt advice for #3DPrinting:

If you want to diy, look into #Voron designs, RatRig, ProForge 300 and others.

HOWEVER if you just want a printer that works, from a company that won't fuck you over, buy a #Prusa. Period. Their attempts at OSI-non-compliant licenses are a piss in the ocean compared to what #BambuLab, #Creality, #FlashForge, #Elegoo, #Anycubic and even #Sovol have been done or are still doing (to be fair, with Sovol it's mostly trashy customer support).

An blunt advice for #3DPrinting:

If you want to diy, look into #Voron designs, RatRig, ProForge 300 and others.

HOWEVER if you just want a printer that works, from a company that won't fuck you over, buy a #Prusa. Period. Their attempts at OSI-non-compliant licenses are a piss in the ocean compared to what #BambuLab, #Creality, #FlashForge, #Elegoo, #Anycubic and even #Sovol have been done or are still doing (to be fair, with Sovol it's mostly trashy customer support).

An blunt advice for #3DPrinting:

If you want to diy, look into #Voron designs, RatRig, ProForge 300 and others.

HOWEVER if you just want a printer that works, from a company that won't fuck you over, buy a #Prusa. Period. Their attempts at OSI-non-compliant licenses are a piss in the ocean compared to what #BambuLab, #Creality, #FlashForge, #Elegoo, #Anycubic and even #Sovol have been done or are still doing (to be fair, with Sovol it's mostly trashy customer support).

An blunt advice for #3DPrinting:

If you want to diy, look into #Voron designs, RatRig, ProForge 300 and others.

HOWEVER if you just want a printer that works, from a company that won't fuck you over, buy a #Prusa. Period. Their attempts at OSI-non-compliant licenses are a piss in the ocean compared to what #BambuLab, #Creality, #FlashForge, #Elegoo, #Anycubic and even #Sovol have been done or are still doing (to be fair, with Sovol it's mostly trashy customer support).

An blunt advice for #3DPrinting:

If you want to diy, look into #Voron designs, RatRig, ProForge 300 and others.

HOWEVER if you just want a printer that works, from a company that won't fuck you over, buy a #Prusa. Period. Their attempts at OSI-non-compliant licenses are a piss in the ocean compared to what #BambuLab, #Creality, #FlashForge, #Elegoo, #Anycubic and even #Sovol have been done or are still doing (to be fair, with Sovol it's mostly trashy customer support).

@geerlingguy I'm 69 years old and was an attorney for 40 years, many of which were spent in litigation. One thing I've learned:

You fool me once, you dumbbell.
You fool me twice, me dumbbell.

That, and https://en.wikipedia.org/wiki/The_Scorpion_and_the_Frog

#Sovol #Voron

@geerlingguy I'm 69 years old and was an attorney for 40 years, many of which were spent in litigation. One thing I've learned:

You fool me once, you dumbbell.
You fool me twice, me dumbbell.

That, and https://en.wikipedia.org/wiki/The_Scorpion_and_the_Frog

#Sovol #Voron

@geerlingguy I'm 69 years old and was an attorney for 40 years, many of which were spent in litigation. One thing I've learned:

You fool me once, you dumbbell.
You fool me twice, me dumbbell.

That, and https://en.wikipedia.org/wiki/The_Scorpion_and_the_Frog

#Sovol #Voron

@geerlingguy I'm 69 years old and was an attorney for 40 years, many of which were spent in litigation. One thing I've learned:

You fool me once, you dumbbell.
You fool me twice, me dumbbell.

That, and https://en.wikipedia.org/wiki/The_Scorpion_and_the_Frog

#Sovol #Voron

@geerlingguy I'm 69 years old and was an attorney for 40 years, many of which were spent in litigation. One thing I've learned:

You fool me once, you dumbbell.
You fool me twice, me dumbbell.

That, and https://en.wikipedia.org/wiki/The_Scorpion_and_the_Frog

#Sovol #Voron

Belts!

CoreXY is surprisingly weird... for those who want to know more:

https://www.corexy.com/theory.html

#voron #corexy

Belts!

CoreXY is surprisingly weird... for those who want to know more:

https://www.corexy.com/theory.html

#voron #corexy

Belts!

CoreXY is surprisingly weird... for those who want to know more:

https://www.corexy.com/theory.html

#voron #corexy

Belts!

CoreXY is surprisingly weird... for those who want to know more:

https://www.corexy.com/theory.html

#voron #corexy

Nach 1 1/2 Wochen ist der #Voron noch nicht ganz fertig, aber er druckt schonmal. Yay 😺!

Nach 1 1/2 Wochen ist der #Voron noch nicht ganz fertig, aber er druckt schonmal. Yay 😺!

Update on the #voron build: Linear rails installed, motors in place, frame stands on rubber feet.

Next up: Installing the belts...

Update on the #voron build: Linear rails installed, motors in place, frame stands on rubber feet.

Next up: Installing the belts...

Update on the #voron build: Linear rails installed, motors in place, frame stands on rubber feet.

Next up: Installing the belts...

Aaaaan the SD card died on my #Voron v0 rpi…. Shame on me for not doing backups. It was “just a test” that ended up working. But seriously, why do we still use SD cards? Usually I would go for a #Radxa or an #OrangePi board with eMMC. But RPi had a pre-built image, and so I went that path…

I just learned, that LDO included mounting bars for the linear rails, which seem to be much better than the default roll-in nuts.

However, in contrast to the roll-in nuts, the mounting bars have to be installed _before_ mounting the extrusions. Unfortunately, this is not documented in the LDO notes for the kit.

Well, since "practice" means doing something over and over again...

#voron #ldo #linearrail

I just learned, that LDO included mounting bars for the linear rails, which seem to be much better than the default roll-in nuts.

However, in contrast to the roll-in nuts, the mounting bars have to be installed _before_ mounting the extrusions. Unfortunately, this is not documented in the LDO notes for the kit.

Well, since "practice" means doing something over and over again...

#voron #ldo #linearrail

I just learned, that LDO included mounting bars for the linear rails, which seem to be much better than the default roll-in nuts.

However, in contrast to the roll-in nuts, the mounting bars have to be installed _before_ mounting the extrusions. Unfortunately, this is not documented in the LDO notes for the kit.

Well, since "practice" means doing something over and over again...

#voron #ldo #linearrail

Yay, it's already time for some linear rails!

You may now bet on how many of the carriages I will be dropping...

#voron #linearrail #murphyslaw

Yay, it's already time for some linear rails!

You may now bet on how many of the carriages I will be dropping...

#voron #linearrail #murphyslaw

Yay, it's already time for some linear rails!

You may now bet on how many of the carriages I will be dropping...

#voron #linearrail #murphyslaw

@3dprinting

#Voron Tap question - since it’s the entire tool head that moves, I shouldn’t have an issue swapping out the actual hotend, right?

Printer comes with a V6 hotend and I don’t want that at all.

#3DPrinting

@3dprinting

#Voron Tap question - since it’s the entire tool head that moves, I shouldn’t have an issue swapping out the actual hotend, right?

Printer comes with a V6 hotend and I don’t want that at all.

#3DPrinting

@3dprinting

#Voron Tap question - since it’s the entire tool head that moves, I shouldn’t have an issue swapping out the actual hotend, right?

Printer comes with a V6 hotend and I don’t want that at all.

#3DPrinting

@3dprinting

#Voron Tap question - since it’s the entire tool head that moves, I shouldn’t have an issue swapping out the actual hotend, right?

Printer comes with a V6 hotend and I don’t want that at all.

#3DPrinting

Success! Hard won over 29 hours with my #ERCFv3 on my #Voron Trident AWD 350.
No false filament runouts triggered, so my redesign of the hot-end switch is working. Just a few clogs, the usual filament unload fails and a blocked nozzle which I dealt with by just putting a new nozzle on. Amazed I saved this after so long on the print bed.

Success! Hard won over 29 hours with my #ERCFv3 on my #Voron Trident AWD 350.
No false filament runouts triggered, so my redesign of the hot-end switch is working. Just a few clogs, the usual filament unload fails and a blocked nozzle which I dealt with by just putting a new nozzle on. Amazed I saved this after so long on the print bed.

Success! Hard won over 29 hours with my #ERCFv3 on my #Voron Trident AWD 350.
No false filament runouts triggered, so my redesign of the hot-end switch is working. Just a few clogs, the usual filament unload fails and a blocked nozzle which I dealt with by just putting a new nozzle on. Amazed I saved this after so long on the print bed.

Success! Hard won over 29 hours with my #ERCFv3 on my #Voron Trident AWD 350.
No false filament runouts triggered, so my redesign of the hot-end switch is working. Just a few clogs, the usual filament unload fails and a blocked nozzle which I dealt with by just putting a new nozzle on. Amazed I saved this after so long on the print bed.

Success! Hard won over 29 hours with my #ERCFv3 on my #Voron Trident AWD 350.
No false filament runouts triggered, so my redesign of the hot-end switch is working. Just a few clogs, the usual filament unload fails and a blocked nozzle which I dealt with by just putting a new nozzle on. Amazed I saved this after so long on the print bed.

I think my new hot-end rebuild has passed the test. Really happy with this result. #3dprinting #voron #ERCFv3

I think my new hot-end rebuild has passed the test. Really happy with this result. #3dprinting #voron #ERCFv3

I think my new hot-end rebuild has passed the test. Really happy with this result. #3dprinting #voron #ERCFv3

I think my new hot-end rebuild has passed the test. Really happy with this result. #3dprinting #voron #ERCFv3

I think my new hot-end rebuild has passed the test. Really happy with this result. #3dprinting #voron #ERCFv3

New customised Hot-end reassembled and working. So far it is all behaving. #Voron #3dprinting

New customised Hot-end reassembled and working. So far it is all behaving. #Voron #3dprinting