home.social

#xlr — Public Fediverse posts

Live and recent posts from across the Fediverse tagged #xlr, aggregated by home.social.

  1. Ich erinnere mich vage an Legenden über #XLR auf Schuko Adapter - eine Kabeltrommel zum Verlängern findet sich ja immer irgendwo - und #BigClive hat diese nützlichen Geräte tatsächlich auf #Ebay gefunden…

    youtube.com/watch?v=N3It566t_AU

  2. Ich erinnere mich vage an Legenden über #XLR auf Schuko Adapter - eine Kabeltrommel zum Verlängern findet sich ja immer irgendwo - und #BigClive hat diese nützlichen Geräte tatsächlich auf #Ebay gefunden…

    youtube.com/watch?v=N3It566t_AU

  3. Ich erinnere mich vage an Legenden über #XLR auf Schuko Adapter - eine Kabeltrommel zum Verlängern findet sich ja immer irgendwo - und #BigClive hat diese nützlichen Geräte tatsächlich auf #Ebay gefunden…

    youtube.com/watch?v=N3It566t_AU

  4. Ich erinnere mich vage an Legenden über #XLR auf Schuko Adapter - eine Kabeltrommel zum Verlängern findet sich ja immer irgendwo - und #BigClive hat diese nützlichen Geräte tatsächlich auf #Ebay gefunden…

    youtube.com/watch?v=N3It566t_AU

  5. Ich erinnere mich vage an Legenden über #XLR auf Schuko Adapter - eine Kabeltrommel zum Verlängern findet sich ja immer irgendwo - und #BigClive hat diese nützlichen Geräte tatsächlich auf #Ebay gefunden…

    youtube.com/watch?v=N3It566t_AU

  6. This is just a small sample of the equipment that is needed to properly produce audio on a professional level for both DAW recording & listening pleasure

    Signal Path
    SBC Pi5 / miniPC
    Playback hardware Audio Interface
    Instrument Mixer
    Mixing Console
    Aux0 send Effect rack unit0 channel 0
    Aux1 send Effect rack unit0 channel 1
    Aux 0 return Master Bus channel 0
    Aux 1 return Master Bus channel 1
    Master faders
    XLR output 0 1
    Headphone Amps 0 1 (4 channel x 2)
    1/4" output 0 1
    Digitizer input 0 1
    DAW

    #PA #Audio #Studio #Signal #chain #XLR #DAW #technology #mixing #Console #Yamaha #AUX #bus

  7. Contrary to what you may believe however, Mackie doesn't deliver its microphones in a beautiful 'flight case' that I've showcased the EM89D in.

    Instead you get a plane Jane cardboard box that I've just photographed, in which the microphone normally resides.

    Even TASCAM delivers its fantastic amazing microphones in plane Jane cardboard boxes.

    Shure tops the charts with ugly cardboard boxes for its magnífico microphones. The boxes in which I got my SM58s are so ugly I'm not even going to photograph them.

    Credit goes to Behringer who delivers it's microphones like the XM8500 in a flightcase. The XM8500 microphone has good use cases here. It's also a fraction of the cost of the EM89D, and a sliver of the cost of the Legendary Shure SM58.

    Never let the low/high price of a microphone fool you. Buy it, if it captures your sound Source nice, and you will find good to fantastic use cases for many microphones which are categorized as cheap.

    Sets of fantastic microphones for example are AKG matched pair condenser mics. They are fantastic for me because I have great use cases for them; they're not fantastic because they have a substantial high price.

    Thank you Behringer for packaging your microphones nicely and sturdy.

    mastodon.bsd.cafe/@Dendrobatus

    #Audio #PA #SoundEngineering #Dynamic #Analog #cápsula #Mackie #Behringer #microphone #magnífico #XLR #stable

  8. Contrary to what you may believe however, Mackie doesn't deliver its microphones in a beautiful 'flight case' that I've showcased the EM89D in.

    Instead you get a plane Jane cardboard box that I've just photographed, in which the microphone normally resides.

    Even TASCAM delivers its fantastic amazing microphones in plane Jane cardboard boxes.

    Shure tops the charts with ugly cardboard boxes for its magnífico microphones. The boxes in which I got my SM58s are so ugly I'm not even going to photograph them.

    Credit goes to Behringer who delivers it's microphones like the XM8500 in a flightcase. The XM8500 microphone has good use cases here. It's also a fraction of the cost of the EM89D, and a sliver of the cost of the Legendary Shure SM58.

    Never let the low/high price of a microphone fool you. Buy it, if it captures your sound Source nice, and you will find good to fantastic use cases for many microphones which are categorized as cheap.

    Sets of fantastic microphones for example are AKG matched pair condenser mics. They are fantastic for me because I have great use cases for them; they're not fantastic because they have a substantial high price.

    Thank you Behringer for packaging your microphones nicely and sturdy.

    mastodon.bsd.cafe/@Dendrobatus

    #Audio #PA #SoundEngineering #Dynamic #Analog #cápsula #Mackie #Behringer #microphone #magnífico #XLR #stable

  9. Contrary to what you may believe however, Mackie doesn't deliver its microphones in a beautiful 'flight case' that I've showcased the EM89D in.

    Instead you get a plane Jane cardboard box that I've just photographed, in which the microphone normally resides.

    Even TASCAM delivers its fantastic amazing microphones in plane Jane cardboard boxes.

    Shure tops the charts with ugly cardboard boxes for its magnífico microphones. The boxes in which I got my SM58s are so ugly I'm not even going to photograph them.

    Credit goes to Behringer who delivers it's microphones like the XM8500 in a flightcase. The XM8500 microphone has good use cases here. It's also a fraction of the cost of the EM89D, and a sliver of the cost of the Legendary Shure SM58.

    Never let the low/high price of a microphone fool you. Buy it, if it captures your sound Source nice, and you will find good to fantastic use cases for many microphones which are categorized as cheap.

    Sets of fantastic microphones for example are AKG matched pair condenser mics. They are fantastic for me because I have great use cases for them; they're not fantastic because they have a substantial high price.

    Thank you Behringer for packaging your microphones nicely and sturdy.

    mastodon.bsd.cafe/@Dendrobatus

    #Audio #PA #SoundEngineering #Dynamic #Analog #cápsula #Mackie #Behringer #microphone #magnífico #XLR #stable

  10. Contrary to what you may believe however, Mackie doesn't deliver its microphones in a beautiful 'flight case' that I've showcased the EM89D in.

    Instead you get a plane Jane cardboard box that I've just photographed, in which the microphone normally resides.

    Even TASCAM delivers its fantastic amazing microphones in plane Jane cardboard boxes.

    Shure tops the charts with ugly cardboard boxes for its magnífico microphones. The boxes in which I got my SM58s are so ugly I'm not even going to photograph them.

    Credit goes to Behringer who delivers it's microphones like the XM8500 in a flightcase. The XM8500 microphone has good use cases here. It's also a fraction of the cost of the EM89D, and a sliver of the cost of the Legendary Shure SM58.

    Never let the low/high price of a microphone fool you. Buy it, if it captures your sound Source nice, and you will find good to fantastic use cases for many microphones which are categorized as cheap.

    Sets of fantastic microphones for example are AKG matched pair condenser mics. They are fantastic for me because I have great use cases for them; they're not fantastic because they have a substantial high price.

    Thank you Behringer for packaging your microphones nicely and sturdy.

    mastodon.bsd.cafe/@Dendrobatus

    #Audio #PA #SoundEngineering #Dynamic #Analog #cápsula #Mackie #Behringer #microphone #magnífico #XLR #stable

  11. Contrary to what you may believe however, Mackie doesn't deliver its microphones in a beautiful 'flight case' that I've showcased the EM89D in.

    Instead you get a plane Jane cardboard box that I've just photographed, in which the microphone normally resides.

    Even TASCAM delivers its fantastic amazing microphones in plane Jane cardboard boxes.

    Shure tops the charts with ugly cardboard boxes for its magnífico microphones. The boxes in which I got my SM58s are so ugly I'm not even going to photograph them.

    Credit goes to Behringer who delivers it's microphones like the XM8500 in a flightcase. The XM8500 microphone has good use cases here. It's also a fraction of the cost of the EM89D, and a sliver of the cost of the Legendary Shure SM58.

    Never let the low/high price of a microphone fool you. Buy it, if it captures your sound Source nice, and you will find good to fantastic use cases for many microphones which are categorized as cheap.

    Sets of fantastic microphones for example are AKG matched pair condenser mics. They are fantastic for me because I have great use cases for them; they're not fantastic because they have a substantial high price.

    Thank you Behringer for packaging your microphones nicely and sturdy.

    mastodon.bsd.cafe/@Dendrobatus

    #Audio #PA #SoundEngineering #Dynamic #Analog #cápsula #Mackie #Behringer #microphone #magnífico #XLR #stable

  12. @schenklklopfer
    #xlr ist ja nicht #cat6 oder sowas, sondern einfach nur strippe für mikro oder so.

    kann eigentlich nicht sein.

  13. XLR cable breaks in the middle of recording, funny. Clearly I should have ordered more than 2 backup cables.... sigh.
    #xlr #recording

  14. Composition with a cheap direct box which failed horribly in a very short time and a roll of Rosin core solder, deliberately set close to an ancient betamax video recorder.

    #Photography #monochromatic #monochrome #Sepia #under_exposure #directBox #XLR #Jack

  15. This is the other end of the XLR cable pulled, out of the instrument mixer, where it's normally plugged into Channel two.
    Of course since a bass guitar is a mono single channel instrument, I only use one channel if I had used a dual Channel effect somewhere in the effect chain, usually at the end, I would have two of these patch cables getting out of that effect, and getting into both ports of Channel two of the instrument mixer

    #Soldering #XLR #patch #patchcable #rosinCore #Electrónica #electronics #signal #effects #analog #mixer

  16. Today I decided to create another patch cable, within my long line of patch cables, important for sending signals from effects, whether they be discrete analog effects, or effects which process the signal digitally, then spit them back out in an analog wave.

    It was important to make this cable because I was using an expensive higher grade cable which I need somewhere else. The cable that I used is a standard XLR cable which has ground signal 1 and signal 2. You can go read on Wikipedia why XLR needs that in detail, but it has to do with the length of an XLR cable which can go to 30 m if you need it.

    The signal that I need to carry only needs an unstable connection which means a signal and a ground. My XLR cable is een overkill but I don't have any other cable.

    Enthusiastically I warmed up my trusted Weller soldering iron, waited till it heated up, took my fantastic cable stripper stripped the cable on both ends, prepared the connectors beforehand and started soldering.

    Everything went smoothly I've been soldering since I'm a 7 year old kid. Of course quality control is important so my multimeter was tuned on diode.

    For the uninformed, a diode is a electrical component which only lets current on one side, and then blocks it from the other side. This setting is also used to check the connections & continuity in cables and on ports.

    When I was done something strange occurred. I measured the cable and the mass, the common was open. Checking both sides of the soldering work showed it was perfect. Not believing that there could be disruption in the cable, I stripped one side then measured the cable and came to the same conclusion broken Mass. I caught and stripped another small section of the cable at the other side and still an open Mass.

    So I've had a piece of XLR cable, that didn't ground and I had used that as a stable cable, which had given me all kinds of interesting artifacts, that I alleviated by just stripping out that one piece of cable, years ago.

    Now a regular person would take that cable and chunk it on the side. I on the other hand I'm not a regular person, I started stripping / dismantling radios when I was two and when I was five I had such a skill that it looked like a trained electronic professional had stripped the radio. Are we talking about radios in the Tube era, where hundreds & hundreds of Volts and many Ampères were going through those circuits.

    XLR cable has three conductors; signal one, signal two and ground. I used the white conductor as the new Mass, the new ground and used the red conductor as a signal two, thus making a balanced XLR cable unbalanced because the ground conductor was broken.

    It was a wonderful trip, taking this piece of XLR cable and reusing it again even though only two conductors were usable effectively.

    I may provide photographs later.

    #Soldering #XLR #patch #patchcable #rosinCore #Electrónica #electronics #signal #effects #analog #mixer

  17. Are there any XLR or ITT Cannon X-series connector fans out there who know where I can find replacement XLR contact pins such as these?
    @askelectronics

    They're from the base of a #Rode NTG-3 microphone, I'm missing one of the positive/neutral pins (top one in the image) but haven't had much luck in finding replacements. Contacted Rode but they haven't gotten back to me yet, figured if it's an easy item to source....

    (Specific dimensions in alt text)

    #AskElectronics #Tech #Repair #Audio #XLR

  18. Can anyone tell me what kind of #XLR #cable I need for this #EVO 4 DAW? Nothing on their website, or in their manual.

  19. Ich hätte gerne mehr Ahnung von #Audiotechnik.

    #Audio Output: 2x #XLR (L/R) sowie 2x Monoklinke 6,35 mm (L/R)

    Audio Input: 1x XLR sowie 2x Cinch (L/R)

    Ich würde gerne die XLR-Anschlüsse nutzen - aber irgendwie fehlt da gefühlt einer. 🤔

  20. Today, I present to you something cursed: etherCON.

    This is from the same company that makes speakON and powerCON, by the way. And yes, it is exactly what you think it is.

    #wtf #ethernet #xlr #ethercon #cursed #why #whatEven

  21. Ich überlege langfristig auf primär XLR umzusteigen und wollte fragen, was sich da am besten für ein Mischpult lohnt?

    :BoostOK: :ReplyOK:

    #XLR #Mikrofon #Podcast #followerpower

  22. I can't thank everyone enough for all their help and input on my quest to find an inexpensive XLR to USB adapter for my Stagg dynamic microphone - so many lovely people on Mastodon and the Fediverse! I'm definitely keen to grab a Pyle XLR-to-USB signal adapter but the only one I can seem to find in the UK (link below) still needs to be shipped over across from the US, so if anyone knows any good UK sellers (or any equivalent item in the UK) for the same price range, do let me know! Thanks! #AskFedi #audiophile #audio #xlr #usb #microphone #podcasting #podcast #podcaster amazon.co.uk/Pyle-Microphone-X

  23. @lina
    Кстати, я по-моему именно у Адама подсмотрел что делают угловые XLR-разъёмы и сразу радостно назаказывал себе целую пачку чтобы потом их применять там, где это удобнее, чем было бы с прямыми.

    Фото:
    0. Россыпь XLR разъёмов и штекеров - прямых и угловых.
    1. Как было. Кабель торчит далеко и гнётся - особенно если пригибать пантограф к столу.
    2. Как стало. Кабель меньше торчит, на стол если и ложится, то металлический кожух.
    3. Аналогично на звуковой карте в стойке - кабель не висит углом, а сразу идёт сверху вниз.

    #pic #hardware #DIY #XLR #recording

  24. We recently received a replacement for our dysfunctional #bluray player at the #theatre

    A #Tascam #MP4K, which has #xlr balanced audio out, as well remote control it via #rs232, or #tcp !

    No one has written anything for it that I could find, so I wrote a #FOSS library/cli-in-one in #php, and call it Tasnet!

    With it you can:
    * power on/off
    * open/close tray
    * play/pause/stop
    * change display time (remain/elapsed)
    * even more!
    * hack away (copyleft/MIT)

    gist.sbcloud.cc/sb/d54f9c4facd

  25. Ok, where the heck did my #XLR cables go?

  26. Happy to report that my shiny new (super low-end!) 192|4 works out of the box on over , both as a and as an -in.

    As an newb, I mostly chose it for the big knob in the middle!

    Now I know it's working (and won't need to be returned) I might even take the plastic cladding off the front panel+knob ... 😱