#x1carbon — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #x1carbon, aggregated by home.social.
-
@occirol well I do have a couple of #ThinkPads that I swap in the setup depending on what I'm working on. Here's with the #X1Carbon running Fedora
I prefer this setup than having another 23" monitor further to the right and I have to crank my neck more 😆
-
@occirol well I do have a couple of #ThinkPads that I swap in the setup depending on what I'm working on. Here's with the #X1Carbon running Fedora
I prefer this setup than having another 23" monitor further to the right and I have to crank my neck more 😆
-
@occirol well I do have a couple of #ThinkPads that I swap in the setup depending on what I'm working on. Here's with the #X1Carbon running Fedora
I prefer this setup than having another 23" monitor further to the right and I have to crank my neck more 😆
-
@occirol well I do have a couple of #ThinkPads that I swap in the setup depending on what I'm working on. Here's with the #X1Carbon running Fedora
I prefer this setup than having another 23" monitor further to the right and I have to crank my neck more 😆
-
@jameshjacks0njr I've had great experience with the #X1carbon series (used the 3rd and 7th gen for 4 years each and currently on the 11th gen). Each of them would probably last longer if not for company policy to replace them. They are portable, powerful enough for most general use, and very durable (I'm super clumsy 😳). It's a great balance between the more performant T/P series and the more economical E/L series.
-
@jameshjacks0njr I've had great experience with the #X1carbon series (used the 3rd and 7th gen for 4 years each and currently on the 11th gen). Each of them would probably last longer if not for company policy to replace them. They are portable, powerful enough for most general use, and very durable (I'm super clumsy 😳). It's a great balance between the more performant T/P series and the more economical E/L series.
-
@jameshjacks0njr I've had great experience with the #X1carbon series (used the 3rd and 7th gen for 4 years each and currently on the 11th gen). Each of them would probably last longer if not for company policy to replace them. They are portable, powerful enough for most general use, and very durable (I'm super clumsy 😳). It's a great balance between the more performant T/P series and the more economical E/L series.
-
@jameshjacks0njr I've had great experience with the #X1carbon series (used the 3rd and 7th gen for 4 years each and currently on the 11th gen). Each of them would probably last longer if not for company policy to replace them. They are portable, powerful enough for most general use, and very durable (I'm super clumsy 😳). It's a great balance between the more performant T/P series and the more economical E/L series.
-
So, I've been playing around with a ThinkPad X1 Carbon Gen 13 Aura Edition for a bit.
Overall, I feel almost right at home with the X1 Carbon.
I wished I could highlight all the good things, about it, but frankly, it's mostly neck-in-neck with the 14-inch M4 Pro MacBook Pro.
That said, I may as well list out things that either laptops have missing.
What X1 Carbon doesn't have.
- Long battery life
- HDR display
- Smudge-resistant exterior
- Ability to dev for the Apple ecosystem
- Good speakersThings that the MacBook doesn't have:
- Touch screen
- Screen real estate at the top (it's been replaced by a notch)
- Insanely lightweight (X1 Carbon is less than a kilogram in weight)
- screen folds out 180 degrees#ThinkPad #Lenovo #LenovoThinkPad #X1Carbon #ThinkPadX1Carbon #X1
-
So, I've been playing around with a ThinkPad X1 Carbon Gen 13 Aura Edition for a bit.
Overall, I feel almost right at home with the X1 Carbon.
I wished I could highlight all the good things, about it, but frankly, it's mostly neck-in-neck with the 14-inch M4 Pro MacBook Pro.
That said, I may as well list out things that either laptops have missing.
What X1 Carbon doesn't have.
- Long battery life
- HDR display
- Smudge-resistant exterior
- Ability to dev for the Apple ecosystem
- Good speakersThings that the MacBook doesn't have:
- Touch screen
- Screen real estate at the top (it's been replaced by a notch)
- Insanely lightweight (X1 Carbon is less than a kilogram in weight)
- screen folds out 180 degrees#ThinkPad #Lenovo #LenovoThinkPad #X1Carbon #ThinkPadX1Carbon #X1
-
So, I've been playing around with a ThinkPad X1 Carbon Gen 13 Aura Edition for a bit.
Overall, I feel almost right at home with the X1 Carbon.
I wished I could highlight all the good things, about it, but frankly, it's mostly neck-in-neck with the 14-inch M4 Pro MacBook Pro.
That said, I may as well list out things that either laptops have missing.
What X1 Carbon doesn't have.
- Long battery life
- HDR display
- Smudge-resistant exterior
- Ability to dev for the Apple ecosystem
- Good speakersThings that the MacBook doesn't have:
- Touch screen
- Screen real estate at the top (it's been replaced by a notch)
- Insanely lightweight (X1 Carbon is less than a kilogram in weight)
- screen folds out 180 degrees#ThinkPad #Lenovo #LenovoThinkPad #X1Carbon #ThinkPadX1Carbon #X1
-
So, I've been playing around with a ThinkPad X1 Carbon Gen 13 Aura Edition for a bit.
Overall, I feel almost right at home with the X1 Carbon.
I wished I could highlight all the good things, about it, but frankly, it's mostly neck-in-neck with the 14-inch M4 Pro MacBook Pro.
That said, I may as well list out things that either laptops have missing.
What X1 Carbon doesn't have.
- Long battery life
- HDR display
- Smudge-resistant exterior
- Ability to dev for the Apple ecosystem
- Good speakersThings that the MacBook doesn't have:
- Touch screen
- Screen real estate at the top (it's been replaced by a notch)
- Insanely lightweight (X1 Carbon is less than a kilogram in weight)
- screen folds out 180 degrees#ThinkPad #Lenovo #LenovoThinkPad #X1Carbon #ThinkPadX1Carbon #X1
-
Mein 3-Jähriger #Lenovo #T14 mit Windows hat idle eine Akkulaufzeit von 4h und wird schön warm. Der 6-jährige Lenovo #X1Carbon mit #PopOS #Linux hat bei Büroarbeiten immer noch eine Akkulaufzeit von 6h und bleibt schön kühl. Dito der 5-jährige T14. Die Linuxer bleiben auch schön ruhig, während der Windowsler häufig föhnt. Hauptursache für die Last unter Windows scheinen Teams, Outlook und Defender zu sein. Unter Linux scheinen diese Plagen ruhiger zu sein.
Ich mag Linux. -
Mein 3-Jähriger #Lenovo #T14 mit Windows hat idle eine Akkulaufzeit von 4h und wird schön warm. Der 6-jährige Lenovo #X1Carbon mit #PopOS #Linux hat bei Büroarbeiten immer noch eine Akkulaufzeit von 6h und bleibt schön kühl. Dito der 5-jährige T14. Die Linuxer bleiben auch schön ruhig, während der Windowsler häufig föhnt. Hauptursache für die Last unter Windows scheinen Teams, Outlook und Defender zu sein. Unter Linux scheinen diese Plagen ruhiger zu sein.
Ich mag Linux. -
Mein 3-Jähriger #Lenovo #T14 mit Windows hat idle eine Akkulaufzeit von 4h und wird schön warm. Der 6-jährige Lenovo #X1Carbon mit #PopOS #Linux hat bei Büroarbeiten immer noch eine Akkulaufzeit von 6h und bleibt schön kühl. Dito der 5-jährige T14. Die Linuxer bleiben auch schön ruhig, während der Windowsler häufig föhnt. Hauptursache für die Last unter Windows scheinen Teams, Outlook und Defender zu sein. Unter Linux scheinen diese Plagen ruhiger zu sein.
Ich mag Linux. -
#SkewCorrection - Addition:
The G-Code for skew correction with x and y values (e.g. M1005 X149.15 Y149.65 ) is ITERATIVE!
This means that you may only save it once with M500 and then delete or comment out the commands M1005 and M500 from the machine G-code, otherwise there will be an overcorrection that increases each time the G-code is used (= each print).Another possibility is using a calculated skew factor
e.g. M1005 I-0.006649 which can be left in the G-Code, it is used until it will be overwritten by another "I"-Factor.Resetting the skew factor is done with
M1005 I0
M500See following Post for further information and a Calculation-Sheet for calculating the skew factor.
https://forum.bambulab.com/t/skew-compensation-in-the-bambu-x1c-firmware/67661/37#BambuLab #X1Carbon #3DPrint #3DPrinting #3DDrucker #3DDruck
-
#SkewCorrection - Addition:
The G-Code for skew correction with x and y values (e.g. M1005 X149.15 Y149.65 ) is ITERATIVE!
This means that you may only save it once with M500 and then delete or comment out the commands M1005 and M500 from the machine G-code, otherwise there will be an overcorrection that increases each time the G-code is used (= each print).Another possibility is using a calculated skew factor
e.g. M1005 I-0.006649 which can be left in the G-Code, it is used until it will be overwritten by another "I"-Factor.Resetting the skew factor is done with
M1005 I0
M500See following Post for further information and a Calculation-Sheet for calculating the skew factor.
https://forum.bambulab.com/t/skew-compensation-in-the-bambu-x1c-firmware/67661/37#BambuLab #X1Carbon #3DPrint #3DPrinting #3DDrucker #3DDruck
-
#SkewCorrection - Addition:
The G-Code for skew correction with x and y values (e.g. M1005 X149.15 Y149.65 ) is ITERATIVE!
This means that you may only save it once with M500 and then delete or comment out the commands M1005 and M500 from the machine G-code, otherwise there will be an overcorrection that increases each time the G-code is used (= each print).Another possibility is using a calculated skew factor
e.g. M1005 I-0.006649 which can be left in the G-Code, it is used until it will be overwritten by another "I"-Factor.Resetting the skew factor is done with
M1005 I0
M500See following Post for further information and a Calculation-Sheet for calculating the skew factor.
https://forum.bambulab.com/t/skew-compensation-in-the-bambu-x1c-firmware/67661/37#BambuLab #X1Carbon #3DPrint #3DPrinting #3DDrucker #3DDruck
-
#SkewCorrection - Addition:
The G-Code for skew correction with x and y values (e.g. M1005 X149.15 Y149.65 ) is ITERATIVE!
This means that you may only save it once with M500 and then delete or comment out the commands M1005 and M500 from the machine G-code, otherwise there will be an overcorrection that increases each time the G-code is used (= each print).Another possibility is using a calculated skew factor
e.g. M1005 I-0.006649 which can be left in the G-Code, it is used until it will be overwritten by another "I"-Factor.Resetting the skew factor is done with
M1005 I0
M500See following Post for further information and a Calculation-Sheet for calculating the skew factor.
https://forum.bambulab.com/t/skew-compensation-in-the-bambu-x1c-firmware/67661/37#BambuLab #X1Carbon #3DPrint #3DPrinting #3DDrucker #3DDruck
-
#3DPrinter Problems, #BambuLab
The print head of my #X1Carbon has recently started banging hard against the back wall (or rather, against the folded metal sheet at the back wall) 🤔.
Cleaning the carbon axles and recalibrating the printer didn't help in the search for the cause, nor did the internet.Until the epiphany came 💡
I recently carried out a skew correction and, as recommended by Bambu Lab, inserted the measured values into the machine's G-code:
M1005 X150.05 Y149.65 ; Skew correction
M500 ; save the values permanentlyThe solution to the puzzle:
The X value is greater than the Y value for the entered skew correction., i.e. Y movements are corrected upwards - ergo the distance that the print head travels from the front left corner (reference) to the position near the filament cleaner (very close to the rear wall) increases -> leads to impacts against the wall / bended metal sheet because the print head wants to travel further than it can.
🤦♂️Changing the G-Code to
M1005 X150 Y150
M500
and the "head bang" problem was gone. 🤷♂️
No problem if the Y-value for skew correction is bigger than the X-value, but do not do a skew correction if X > Y !!!Maybe it will help someone.
-
#3DPrinter Problems, #BambuLab
The print head of my #X1Carbon has recently started banging hard against the back wall (or rather, against the folded metal sheet at the back wall) 🤔.
Cleaning the carbon axles and recalibrating the printer didn't help in the search for the cause, nor did the internet.Until the epiphany came 💡
I recently carried out a skew correction and, as recommended by Bambu Lab, inserted the measured values into the machine's G-code:
M1005 X150.05 Y149.65 ; Skew correction
M500 ; save the values permanentlyThe solution to the puzzle:
The X value is greater than the Y value for the entered skew correction., i.e. Y movements are corrected upwards - ergo the distance that the print head travels from the front left corner (reference) to the position near the filament cleaner (very close to the rear wall) increases -> leads to impacts against the wall / bended metal sheet because the print head wants to travel further than it can.
🤦♂️Changing the G-Code to
M1005 X150 Y150
M500
and the "head bang" problem was gone. 🤷♂️
No problem if the Y-value for skew correction is bigger than the X-value, but do not do a skew correction if X > Y !!!Maybe it will help someone.
-
#3DPrinter Problems, #BambuLab
The print head of my #X1Carbon has recently started banging hard against the back wall (or rather, against the folded metal sheet at the back wall) 🤔.
Cleaning the carbon axles and recalibrating the printer didn't help in the search for the cause, nor did the internet.Until the epiphany came 💡
I recently carried out a skew correction and, as recommended by Bambu Lab, inserted the measured values into the machine's G-code:
M1005 X150.05 Y149.65 ; Skew correction
M500 ; save the values permanentlyThe solution to the puzzle:
The X value is greater than the Y value for the entered skew correction., i.e. Y movements are corrected upwards - ergo the distance that the print head travels from the front left corner (reference) to the position near the filament cleaner (very close to the rear wall) increases -> leads to impacts against the wall / bended metal sheet because the print head wants to travel further than it can.
🤦♂️Changing the G-Code to
M1005 X150 Y150
M500
and the "head bang" problem was gone. 🤷♂️
No problem if the Y-value for skew correction is bigger than the X-value, but do not do a skew correction if X > Y !!!Maybe it will help someone.
-
#3DPrinter Problems, #BambuLab
The print head of my #X1Carbon has recently started banging hard against the back wall (or rather, against the folded metal sheet at the back wall) 🤔.
Cleaning the carbon axles and recalibrating the printer didn't help in the search for the cause, nor did the internet.Until the epiphany came 💡
I recently carried out a skew correction and, as recommended by Bambu Lab, inserted the measured values into the machine's G-code:
M1005 X150.05 Y149.65 ; Skew correction
M500 ; save the values permanentlyThe solution to the puzzle:
The X value is greater than the Y value for the entered skew correction., i.e. Y movements are corrected upwards - ergo the distance that the print head travels from the front left corner (reference) to the position near the filament cleaner (very close to the rear wall) increases -> leads to impacts against the wall / bended metal sheet because the print head wants to travel further than it can.
🤦♂️Changing the G-Code to
M1005 X150 Y150
M500
and the "head bang" problem was gone. 🤷♂️
No problem if the Y-value for skew correction is bigger than the X-value, but do not do a skew correction if X > Y !!!Maybe it will help someone.
-
It's hard to realize that the keyboard on #Lenovo #ThinkPad X1 Carbon Gen 11 is quite bad compared to the Gen 8 one.
I'm doing far more typos on this new keyboard than with the previous one, even after haven used it for several months. I thought I would get used to by now, but seems this will be a long journey get used to.
And the T14 Gen 1 keyboard is even better than the X1C Gen 8.
The issue? The key travel is too short and the key pressure resistance is getting shorter and lighter.
It's actually quite depressing to see what's happening to these keyboards.
-
It's hard to realize that the keyboard on #Lenovo #ThinkPad X1 Carbon Gen 11 is quite bad compared to the Gen 8 one.
I'm doing far more typos on this new keyboard than with the previous one, even after haven used it for several months. I thought I would get used to by now, but seems this will be a long journey get used to.
And the T14 Gen 1 keyboard is even better than the X1C Gen 8.
The issue? The key travel is too short and the key pressure resistance is getting shorter and lighter.
It's actually quite depressing to see what's happening to these keyboards.
-
It's hard to realize that the keyboard on #Lenovo #ThinkPad X1 Carbon Gen 11 is quite bad compared to the Gen 8 one.
I'm doing far more typos on this new keyboard than with the previous one, even after haven used it for several months. I thought I would get used to by now, but seems this will be a long journey get used to.
And the T14 Gen 1 keyboard is even better than the X1C Gen 8.
The issue? The key travel is too short and the key pressure resistance is getting shorter and lighter.
It's actually quite depressing to see what's happening to these keyboards.
-
It's hard to realize that the keyboard on #Lenovo #ThinkPad X1 Carbon Gen 11 is quite bad compared to the Gen 8 one.
I'm doing far more typos on this new keyboard than with the previous one, even after haven used it for several months. I thought I would get used to by now, but seems this will be a long journey get used to.
And the T14 Gen 1 keyboard is even better than the X1C Gen 8.
The issue? The key travel is too short and the key pressure resistance is getting shorter and lighter.
It's actually quite depressing to see what's happening to these keyboards.
-
Hmm, sounds like Dell are killing the XPS line.
I've had 2 XPS13 machines (shipped with Linux pre-installed) and they've been great, but looks like next replacement personal machine will likely be another ThinkPad X1 Carbon (the current work machine)
-
Hmm, sounds like Dell are killing the XPS line.
I've had 2 XPS13 machines (shipped with Linux pre-installed) and they've been great, but looks like next replacement personal machine will likely be another ThinkPad X1 Carbon (the current work machine)
-
Hmm, sounds like Dell are killing the XPS line.
I've had 2 XPS13 machines (shipped with Linux pre-installed) and they've been great, but looks like next replacement personal machine will likely be another ThinkPad X1 Carbon (the current work machine)
-
Hmm, sounds like Dell are killing the XPS line.
I've had 2 XPS13 machines (shipped with Linux pre-installed) and they've been great, but looks like next replacement personal machine will likely be another ThinkPad X1 Carbon (the current work machine)
-
While my intel #MacBookPro is far more powerful than my old Lenovo #X1Carbon the Kali VM feels far snappier on the later. Both running on #VirtualBox
Not sure if there is some misconfiguration 😠
Any hints welcome -
While my intel #MacBookPro is far more powerful than my old Lenovo #X1Carbon the Kali VM feels far snappier on the later. Both running on #VirtualBox
Not sure if there is some misconfiguration 😠
Any hints welcome -
While my intel #MacBookPro is far more powerful than my old Lenovo #X1Carbon the Kali VM feels far snappier on the later. Both running on #VirtualBox
Not sure if there is some misconfiguration 😠
Any hints welcome -
While my intel #MacBookPro is far more powerful than my old Lenovo #X1Carbon the Kali VM feels far snappier on the later. Both running on #VirtualBox
Not sure if there is some misconfiguration 😠
Any hints welcome -
Automatic filament switch to use last bits for #functionalprint #AMS #bambulab #x1carbon #xtool #xtoold1pro #laserengraving #laserengraver #honeycomb #3dprinting
Video links:
Instagram
https://www.instagram.com/p/DCFROJPP9qd/TikTok
https://www.tiktok.com/@jasonjkaczor/video/7434579868999847223FaceBook
https://www.facebook.com/reel/1080843220245452YouTube
https://youtu.be/OkzHNXEFg2g -
Automatic filament switch to use last bits for #functionalprint #AMS #bambulab #x1carbon #xtool #xtoold1pro #laserengraving #laserengraver #honeycomb #3dprinting
Video links:
Instagram
https://www.instagram.com/p/DCFROJPP9qd/TikTok
https://www.tiktok.com/@jasonjkaczor/video/7434579868999847223FaceBook
https://www.facebook.com/reel/1080843220245452YouTube
https://youtu.be/OkzHNXEFg2g -
Automatic filament switch to use last bits for #functionalprint #AMS #bambulab #x1carbon #xtool #xtoold1pro #laserengraving #laserengraver #honeycomb #3dprinting
Video links:
Instagram
https://www.instagram.com/p/DCFROJPP9qd/TikTok
https://www.tiktok.com/@jasonjkaczor/video/7434579868999847223FaceBook
https://www.facebook.com/reel/1080843220245452YouTube
https://youtu.be/OkzHNXEFg2g -
Automatic filament switch to use last bits for #functionalprint #AMS #bambulab #x1carbon #xtool #xtoold1pro #laserengraving #laserengraver #honeycomb #3dprinting
Video links:
Instagram
https://www.instagram.com/p/DCFROJPP9qd/TikTok
https://www.tiktok.com/@jasonjkaczor/video/7434579868999847223FaceBook
https://www.facebook.com/reel/1080843220245452YouTube
https://youtu.be/OkzHNXEFg2g -
Automatic filament switch to use last bits for #functionalprint #AMS #bambulab #x1carbon #xtool #xtoold1pro #laserengraving #laserengraver #honeycomb #3dprinting
Video links:
Instagram
https://www.instagram.com/p/DCFROJPP9qd/TikTok
https://www.tiktok.com/@jasonjkaczor/video/7434579868999847223FaceBook
https://www.facebook.com/reel/1080843220245452YouTube
https://youtu.be/OkzHNXEFg2g -
Automatic filament switch to use last bits for #functionalprint #AMS #bambulab #x1carbon #xtool #xtoold1pro #laserengraving #laserengraver #honeycomb #3dprinting
Video links:
Instagram
https://www.instagram.com/p/DCFROJPP9qd/TikTok
https://www.tiktok.com/@jasonjkaczor/video/7434579868999847223FaceBook
https://www.facebook.com/reel/1080843220245452YouTube
https://youtu.be/OkzHNXEFg2g -
Automatic filament switch to use last bits for #functionalprint #AMS #bambulab #x1carbon #xtool #xtoold1pro #laserengraving #laserengraver #honeycomb #3dprinting
Video links:
Instagram
https://www.instagram.com/p/DCFROJPP9qd/TikTok
https://www.tiktok.com/@jasonjkaczor/video/7434579868999847223FaceBook
https://www.facebook.com/reel/1080843220245452YouTube
https://youtu.be/OkzHNXEFg2g -
Best moments when two hobbies come together. Here I added a 3D printed, very solid stand to my self-assembled PiDP-8 replica of a #PDP8. The hand rest barely fit diagonally onto the print bed, phew! Together with four silicone bumpers the whole thing doesn’t move a bit on the desk. 👌 #3dprinting #computerhistory #decpdp8 #digitalpdp8 #bambulab #x1carbon #PiDP8
-
Best moments when two hobbies come together. Here I added a 3D printed, very solid stand to my self-assembled PiDP-8 replica of a #PDP8. The hand rest barely fit diagonally onto the print bed, phew! Together with four silicone bumpers the whole thing doesn’t move a bit on the desk. 👌 #3dprinting #computerhistory #decpdp8 #digitalpdp8 #bambulab #x1carbon #PiDP8
-
Best moments when two hobbies come together. Here I added a 3D printed, very solid stand to my self-assembled PiDP-8 replica of a #PDP8. The hand rest barely fit diagonally onto the print bed, phew! Together with four silicone bumpers the whole thing doesn’t move a bit on the desk. 👌 #3dprinting #computerhistory #decpdp8 #digitalpdp8 #bambulab #x1carbon #PiDP8
-
Best moments when two hobbies come together. Here I added a 3D printed, very solid stand to my self-assembled PiDP-8 replica of a #PDP8. The hand rest barely fit diagonally onto the print bed, phew! Together with four silicone bumpers the whole thing doesn’t move a bit on the desk. 👌 #3dprinting #computerhistory #decpdp8 #digitalpdp8 #bambulab #x1carbon #PiDP8
-
@Newk Similar experience here. Assembled the #Prusa mk3s quite some time ago but it never „clicked“ between us. Got my #BambuLab A1 mini & AMS lite three days ago and am blown away by this awesome little machine! Already printed more in those few days than I ever printed on the Prusa. Won‘t go back. Will sell it and save for the Bambu Lab #X1Carbon (or a successor). #3DPrinting is finally fun again thanks to #Bambu Lab!
-
@Newk Similar experience here. Assembled the #Prusa mk3s quite some time ago but it never „clicked“ between us. Got my #BambuLab A1 mini & AMS lite three days ago and am blown away by this awesome little machine! Already printed more in those few days than I ever printed on the Prusa. Won‘t go back. Will sell it and save for the Bambu Lab #X1Carbon (or a successor). #3DPrinting is finally fun again thanks to #Bambu Lab!
-
@Newk Similar experience here. Assembled the #Prusa mk3s quite some time ago but it never „clicked“ between us. Got my #BambuLab A1 mini & AMS lite three days ago and am blown away by this awesome little machine! Already printed more in those few days than I ever printed on the Prusa. Won‘t go back. Will sell it and save for the Bambu Lab #X1Carbon (or a successor). #3DPrinting is finally fun again thanks to #Bambu Lab!
-
@Newk Similar experience here. Assembled the #Prusa mk3s quite some time ago but it never „clicked“ between us. Got my #BambuLab A1 mini & AMS lite three days ago and am blown away by this awesome little machine! Already printed more in those few days than I ever printed on the Prusa. Won‘t go back. Will sell it and save for the Bambu Lab #X1Carbon (or a successor). #3DPrinting is finally fun again thanks to #Bambu Lab!
-
@Xzan Yeah! Just got mine three days ago and am blown away! Awesome little machine that brings the fun back into #3DPrinting. I already printed more than with my #Prusa in years! The #BambuLab #A1mini is essentially printing all around the clock. 😂 I‘m quite sure I‘ll sell the Prusa and will someday buy an #X1Carbon. 🙈
