#watch-6 — Public Fediverse posts

REDMI Watch 6 To Launch Globally With 12-Day Battery Life #redmi #smartwatches #watch6 #wearables #xiaomi

https://www.lowyat.net/2026/391500/redmi-watch-6-to-launch-globally-with-12-day-battery-life/

Galaxy Watch6 receives the February 2026 update globally!

Samsung has begun distributing the Galaxy Watch6 update that is released today, which will upgrade both your watch’s security and stability. The February 2026 update is now available worldwide.

This update is based on One UI 8.0 Watch, which was released last November.

The firmware build information for this update is found below:

• SM-R960: R960XXU2CZB6
• SM-R950: R950XXU2CZB6
• SM-R940: R940XXU2CZB6
• SM-R930: R930XXU2CZB6

To obtain the update, follow these steps:

1. Open the Wearable app
2. Navigate to Watch settings > Watch software update
3. Tap on Download and Install
4. You should be able to see the update information. Verify the version with your device model posted above.
5. Click on Download, let it download, and click on Install. Make sure that you download the update through Wi-Fi.

This update should take a short time to install. Make sure that you have the watch charged fully before initiating the update process to avoid interruptions. Back up your data in case the update went wrong. Don’t interrupt the update process, or you’ll experience problems later.

Galaxy Watch6 receives the February 2026 update

Samsung has begun distributing the Galaxy Watch6 update that is released today, which will upgrade both your watch’s security and stability. The February 2026 update begins its rollout from Korea, with the remaining set of devices expected to receive the update as early as next week.

This update is based on One UI 8.0 Watch, which was released last November.

The firmware build information for this update is found below:

• SM-R960: R960XXU2CZB6 [KOO]
• SM-R950: R950XXU2CZB6 [KOO]
• SM-R940: R940XXU2CZB6 [KOO]
• SM-R930: R930XXU2CZB6 [KOO]

To obtain the update, follow these steps:

1. Open the Wearable app
2. Navigate to Watch settings > Watch software update
3. Tap on Download and Install
4. You should be able to see the update information. Verify the version with your device model posted above.
5. Click on Download, let it download, and click on Install. Make sure that you download the update through Wi-Fi.

This update should take a short time to install. Make sure that you have the watch charged fully before initiating the update process to avoid interruptions. Back up your data in case the update went wrong. Don’t interrupt the update process, or you’ll experience problems later.

Galaxy Watch6 receives a new January 2026 update!

Samsung has started rolling out a new software update that upgrades the security patch level to January 1st, 2026, to the Galaxy Watch6 series, starting from Korea. The flagship watches will be updated to the following versions:

• Galaxy Watch6 40mm (BT and Cellular, SM-R930/R935x): CZA1
• Galaxy Watch6 44mm (BT and Cellular, SM-R940/R945x): CZA1
• Galaxy Watch6 Classic 40mm (BT and Cellular, SM-R950/R955x): CZA1
• Galaxy Watch6 Classic 44mm (BT and Cellular, SM-R960/R965x): CZA1

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#Android #GalaxyWatch6 #GalaxyWatch6Classic #news #oneUi #OneUI6Watch #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #smartwatch #Smartwatches #Tech #Technology #update #Watch #Watch6 #Watch6Classic #Wearable

One UI 8 Watch for the Galaxy Watch6 LTE released in the USA!

After Samsung shut down the Beta program for the One UI 8 Watch update for the Galaxy Watch6 LTE series, Samsung has released One UI 8 Watch for the Galaxy Watch6 LTE series officially, starting from the USA with Verizon plan applied. Regular users can now download the stable version of One UI 8 Watch.

If your watch is from some cellular providers, such as Verizon, US Cellular, or AT&T, you can download the update. If your watch is from T-Mobile, and you’re not a participant of the Beta Program, you’ll need to wait.

You can identify the stable release with the CYK2 version as the build version for your Galaxy Watch6.

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#android #galaxyWatch6 #galaxyWatch6Classic #news #oneUi #samsung #samsungGalaxyWatch6 #samsungGalaxyWatch6Classic #smartwatch #smartwatches #tech #technology #update #watch6 #watch6Classic

One UI 8 Watch Beta Program closes for the Galaxy Watch5!

After the release of the 2nd One UI 8 Watch Beta for the Watch5, Samsung was putting their final touches on the stable release for this smartwatch series. Today, Samsung has shut down the One UI 8 Watch Beta program for the Galaxy Watch5 series, starting from Korea, which means that the beta testers can now download the stable version of One UI 8 Watch. This was a very long wait after the release of the stable version of One UI 8 Watch back in July for the Galaxy Watch8 and Watch Ultra.

The USA will have to wait a bit longer, as we haven’t seen any update regarding the closure of the beta program there yet. If you’re not a beta tester, or if you’re on a cellular network, you may have to wait a bit longer.

You can identify the stable release with the DYK4 version as the build version for your Galaxy Watch5.

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#android #galaxyWatch6 #galaxyWatch6Classic #news #oneUi #samsung #samsungGalaxyWatch6 #samsungGalaxyWatch6Classic #smartwatch #smartwatches #tech #technology #update #watch6 #watch6Classic

One UI 8 Watch – Now Bar Configuration

A global rollout for the One UI 8 Watch update has started on November 26th for the Galaxy Watch6, a week after the Korean version got it on the 19th. As you can see in the official changelogs, we have seen visual changes, as well as functional changes and other improvements over the One UI 6 Watch that was released last November.

As we got our hands on the update now, we are showcasing how you can customize the Now Bar on your Galaxy Watch6.

In the Advanced Features section of your watch settings on either your phone or on your watch, you can configure the Now Bar on your watch. When “Show on Now Bar when media is playing on phone” is enabled, the Now Bar indicator will show up with the music icon, depending on how you configured the Now Bar for media.

The below settings allow you to configure the Now Bar for your watch.

When you go to one of the apps that support Now Bar, such as Google Play, Google Maps, and a few supported Samsung apps, you can configure whether the app will be shown as just the icon or the icon and the text.

The result is that, in the left picture, you’ll see the icon and the text, and in the right picture, you’ll just see the icon.

To obtain One UI 8 on your watch, you’ll have to be connected to a stable and fast Wi-Fi connection. If your watch is an LTE version, you’ll have to wait a bit longer (in the order of days or weeks).

We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#android #galaxyWatch6 #galaxyWatch6Classic #news #oneUi #samsung #samsungGalaxyWatch6 #samsungGalaxyWatch6Classic #tech #technology #update #watch6 #watch6Classic

One UI 8 Watch Showcase – Galaxy Watch6

A global rollout for the One UI 8 Watch update has started on November 26th for the Galaxy Watch6, a week after the Korean version got it on the 19th. As you can see in the official changelogs, we have seen visual changes, as well as functional changes and other improvements over the One UI 6 Watch that was released last November.

As we got our hands on the update now, we are showcasing what changed in One UI 8 Watch for the Galaxy Watch6 series. As we have the non-classic version, the same set of features exist.

First of all, we have the redesigned tiles that allow you to add more than just one tile to the tile page. A tile page can even have its title edited to fit certain types of information, such as “Activity”, “Body”, and “Heart.” Additionally, we have two tile sizes: one that is small and stores fewer information, and one that is large and stores more information, and some of them provide a button, such as blood oxygen measurement.

At the bottom of each tile page, you have a small pill that becomes the “Add” button, and when you press it, you’ll be taken to a list of tiles that can be added.

You can also manage your tiles more efficiently when you’re editing them on your phone:

One UI 8 Watch introduces brand new icons that look similar to what you’d get with One UI 7 on your phone. With the new, refined icons, your watch becomes more beautiful than before, but that’s not all.

Suggested Apps will show up at the top of the application list if you used your watch enough. Otherwise, you’ll get no suggestions, just like shown in the left image. Those applications show up in a separate box, indicating that those apps are suggestions based on your recent actions done on your watch.

You can turn it on or off by toggling the above setting.

With One UI 8 Watch, you can now switch views quickly between Grid and List. Before, you only had Grid in previous One UI Watch versions. List shows you a list of applications and their names, while Grid shows you three icons per row, all lined up together. This is unlike One UI 6 Watch’s implementation that moves the middle icons a little bit lower than the rest.

At the end of the applications page, there is a button called Set view that allows you to change how the page displays your application icons.

Here comes the most exciting part: new watchfaces have finally landed to the Galaxy Watch6! Previously, they were only available for the Watch8 and Watch Ultra smartwatches back in July. Now, the Galaxy Watch7 and Watch6 owners can enjoy those watch faces! The following watch faces are available:

• Sporty Classic
• Heritage Classic
• Daily Dashboard
• Circle Dashboard
• Minimal Analog
• Minimal Digital
• Dynamic Digits

Now, let’s show you each one of those watch faces.

Out of all the watch faces that were provided with the update, only two of them have support for Low Light Mode, which turns your watch face to a dark green version of your watch face in the night, and those watch faces are Heritage Classic and Sporty Classic.

For recommended watch faces, you’ll get them based on the style of your current watch face.

Now Bar is now available on your Watch6, and supported apps and actions, such as exercises, music, stopwatch, and calls, are now shown straight on your watch face with essential information, similar to how One UI 7 shows you essential info without unlocking your device.

Double pinch gesture, which was initially introduced in One UI 6 Watch released last year, has now become more powerful in this version of One UI 8 Watch, with more actions being added. For example, you can manage notifications by just double-pinching your index finger and your thumb together, open the Now Bar, and do much more.

You can now pin your favorite reminders by clicking on the reminder on your watch and pressing the star button at the top. When you tap it, your reminder will be added to the favorites list.

One UI 8 Watch now smartly redirects your phone notifications to your watch, muting them on your phone in the process, if your phone is off. However, if your phone is on and you’re not using your watch, notifications will not be redirected to your watch; they’ll stay on your phone.

You can change this behavior from the notification settings.

Mindfulness, which used to be only available on your phone, is now available on your watch, too! This feature, while still in beta, includes mood check-in and breathing exercises. Mood check-in allows you to manually select how you’re feeling, while breathing exercises allow you to do them so that you can feel more relaxed.

The watch now also features the changed charging animation that is inspired by One UI 7 and One UI 8 on your phone, with the charging pill shown in the middle of the screen, in contrast to the more minimalistic design that appeared in the previous One UI Watch versions.

The battery pill, which is again taken from One UI 7, appears in the Quick Panel on your watch.

To obtain One UI 8 on your watch, you’ll have to be connected to a stable and fast Wi-Fi connection. If your watch is an LTE version, you’ll have to wait a bit longer (in the order of days or weeks).

We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#android #galaxyWatch6 #galaxyWatch6Classic #news #oneUi #samsung #samsungGalaxyWatch6 #samsungGalaxyWatch6Classic #tech #technology #update #watch6 #watch6Classic

One UI 8 Watch for the Galaxy Watch6 released in the USA!

After Samsung shut down the Beta program for the One UI 8 Watch update for the Galaxy Watch6 series, Samsung has released One UI 8 Watch for the Galaxy Watch6 series officially, starting from the USA. Regular users can now download the stable version of One UI 8 Watch.

If you’re on a cellular network, or your watch is from another region, you may have to wait a bit longer.

You can identify the stable release with the CYK2 version as the build version for your Galaxy Watch6.

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#android #galaxyWatch6 #galaxyWatch6Classic #news #oneUi #samsung #samsungGalaxyWatch6 #samsungGalaxyWatch6Classic #smartwatch #smartwatches #tech #technology #update #watch6 #watch6Classic

One UI 8 Watch Beta Program closes for the Galaxy Watch6 in the USA!

Shortly after the Korean models received the One UI 8 Watch update for the Galaxy Watch6, Samsung has shut down the One UI 8 Watch Beta program for the Galaxy Watch6 series in the USA. The beta testers can now download the stable version of One UI 8 Watch. This is according to the well-known tipster @theonecid.

If you’re not a beta tester, you’re on a cellular network, or your watch is from another region, you may have to wait a bit longer.

You can identify the stable release with the CYK2 version as the build version for your Galaxy Watch6.

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#android #galaxyWatch6 #galaxyWatch6Classic #news #oneUi #samsung #samsungGalaxyWatch6 #samsungGalaxyWatch6Classic #smartwatch #smartwatches #tech #technology #update #watch6 #watch6Classic

Week 47 of 2025 was big for Galaxy Watch users!

In the forty-seventh week of 2025, it was a massive storm of updates in regards to the Wear OS-based Galaxy Watch series, including the latest Galaxy Watch8 series that was released with One UI 8.0 Watch this July, in addition to the shower of security updates for the flagship phones, including the Galaxy S25 series. We have witnessed this from the start of Week 47 for this year in Korea and in other regions, though the Korean rollout was more apparent.

Included in the updates done this week were updates that were related to the entire Galaxy Watch lineup, starting from the most intriguing ones. However, we’d like to highlight the biggest event that happened in the One UI 8 Watch Beta Program as the first item in this list.

Galaxy Watch6’s One UI 8 Watch Update

First of all, the Galaxy Watch6 series in Korea has started receiving the One UI 8 update across the entire region, and the beta program ended this Wednesday, which is November 19th. Shortly after the beta program was closed, the official rollout started for users who didn’t participate in the beta program, starting from the same home country.

One day before that, the Galaxy Watch6 Manager received the November 2025 update that brought redesigns that matched the aesthetics of One UI 8, the same design that is found in your Samsung phone running Android 16. When this update happened, we felt that the One UI 8 Watch stable rollout for this watch series would start very soon, and the stable rollout in Korea confirmed it.

However, users in other regions, such as the United States of America, still didn’t get the update yet, and the global rollout is expected to start within the next Wednesday, if we can count on the rhythm of smartwatch updates, which is usually seven days after the Korean rollout. This means that our best guess is that November 26th is expected to be the big day for the global Watch6 users.

One UI 8 Watch brings the design aesthetics of the phone version of One UI 8 to your wrist, allowing you to perform tasks more efficiently than before, complete with new features that make tracking your health more efficient. Additionally, it brings several new features that make your smartwatch easier to use.

One UI 8 Watch Beta 2 for the Watch5

In addition to the Galaxy Watch6 getting its stable update of One UI 8 Watch in Korea, the Galaxy Watch5 has received the second beta of One UI 8 Watch that fixes performance-related issues, along with the DST time fixes. The Galaxy Watch5 is an older smartwatch series than the later smartwatches, but it is still eligible for the One UI 8 Watch update, with the next version of One UI Watch, scheduled for next year, being the last generational upgrade, according to the promised four-year policy.

There is no release date for the stable version of the One UI 8 Watch software for the Galaxy Watch5 series, but if you see the Watch5 Manager update that is released to the stable channels, then you’ll know that the stable rollout will start very soon. Currently, there is no such update, so those who didn’t participate in the beta program will have to wait longer.

November 2025 update for later smartwatches

In addition to the older smartwatches getting their One UI 8 Watch updates that we’ve mentioned above, recent smartwatches have also obtained their November 2025 update that allowed them to utilize the November 2025 security patch level, including the Galaxy Watch8. Here is the list of smartwatches that obtained this update:

• Galaxy Watch8
• Galaxy Watch7 [KOO]

Next week will, hopefully, be bigger than this week, because the global rollout will commence soon.

#android #galaxyWatch #galaxyWatch5 #galaxyWatch6 #galaxyWatch6Classic #galaxyWatch7 #galaxyWatch8 #news #oneUi #oneUi8 #oneUi8Watch #oneUi80 #samsung #samsungGalaxyWatch5 #samsungGalaxyWatch6 #samsungGalaxyWatch6Classic #samsungGalaxyWatch7 #samsungGalaxyWatch8 #smartwatches #tech #technology #update #watch #watch5 #watch6 #watch6Classic #watch7 #watch8

One UI 8 Watch for the Galaxy Watch6 changelogs

Galaxy Watch6 has recently been updated to One UI 8 Watch, starting from Korea. The wait is over, and the new software will land to your smartwatches soon. This is after almost two months of the One UI 8 Watch Beta program running, starting from September 24th.

This is a machine-translated representation of the changelogs from the Korean language, so mistakes may appear. If the official English version of the changelogs exists, we’ll release it here.

One UI 8 Watch Upgrade:

Efficient Task and Schedule Management:

Quickly check important tasks with the Now bar.
Get the information you need right from the watch face and launch essential features right away. The Now bar at the bottom of the watch face displays the current task at hand.

Double-tap to perform more actions:
Double-tap your thumb and index finger to view notifications, control music, take photos, and more. You can customize actions for alarms, calendars, and reminders, as well as the watch face and music controller. Customize the actions you use most frequently for each situation.

Mark important reminders:
Tap the star icon to mark them as important. You can also pin important reminders to the top so you don’t forget them.

New charging screen:
The screen layout and animations have been updated. You can more easily check the battery level and remaining charge time while charging your watch.

Always connected:

Easily respond to notifications:
Check notifications more quickly with gestures. You can view or reply to notifications by double-tapping your thumb and index finger without having to tap the screen, and a shake of your wrist will instantly return you to the watch screen.

Improved Notification Screen
Experience a simpler, newer way to see notifications on your watch. When you receive multiple notifications from the same app, you can now expand and view overlapping notifications, allowing you to easily view the details of each notification.

Smarter Notification Settings
Easily configure how you receive phone notifications on your watch. Selecting “Receive notifications smartly” will cause notifications to ring only on your phone when you’re using your phone, but not on your watch. When you’re not using your phone, notifications will ring only on your watch. Selecting “Receive on both devices” will allow you to receive notifications on both your phone and watch.

Upgraded Health Management:

Bedtime Guide for Tomorrow:
Get the best bedtime recommendation and start the next day feeling refreshed. The new Bedtime Guide analyzes your sleep data to recommend the best bedtime each night.

Mindfulness in Everyday Life:
Manage stress and anxiety in your daily life with Samsung Health’s new mindfulness feature. Record your emotions and moods, and calm your body and mind with breathing exercises.

Personalized User Experience:

New Watch Faces:
Easily find the watch face style you want. Select keywords like your preferred style, color, and information, and it will find a watch face you like from over 300 watch faces.

Watch Face Recommendations:
Based on the color, style, and information of the watch face you’re currently using, it recommends new watch faces with a fresh feel.

Create Your Own Tiles:
Create your own tiles by combining the information you need. You can even create a single tile for information from different apps, such as weather information, calendar events, and reminders, so you can view them all at once.

Customized Apps Screen
: Find the apps you need faster and easier. Recommended apps are automatically displayed at the top of the Apps screen by analyzing your app usage frequency and patterns. Additionally, the Apps screen can be configured in a grid-style with icons or a list-style with app names.

Display Your Desired Calendars on Your Watch:
You can set the watch calendar to display only events from specific calendars.

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#android #galaxyWatch6 #galaxyWatch6Classic #news #oneUi #samsung #samsungGalaxyWatch6 #samsungGalaxyWatch6Classic #smartwatch #smartwatches #tech #technology #update #watch6 #watch6Classic

One UI 8 Watch for the Galaxy Watch6 released!

After the release of the 5th One UI 8 Watch Beta for the Watch6, Samsung was putting their final touches on the stable release for this smartwatch series. Today, Samsung has released One UI 8 Watch for the Galaxy Watch6 series, starting from Korea, which means that regular users can now download the stable version of One UI 8 Watch. This was a very long wait after the release of the stable version of One UI 8 Watch back in July for the Galaxy Watch8 and Watch Ultra.

The USA will have to wait a bit longer, as we haven’t seen any update regarding the closure of the beta program there yet. If you’re on a cellular network, you may have to wait a bit longer.

You can identify the stable release with the CYK2 version as the build version for your Galaxy Watch6.

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#android #galaxyWatch6 #galaxyWatch6Classic #news #oneUi #samsung #samsungGalaxyWatch6 #samsungGalaxyWatch6Classic #smartwatch #smartwatches #tech #technology #update #watch6 #watch6Classic

One UI 8 Watch Beta Program closes for the Galaxy Watch6!

After the release of the 5th One UI 8 Watch Beta for the Watch6, Samsung was putting their final touches on the stable release for this smartwatch series. Today, Samsung has shut down the One UI 8 Watch Beta program for the Galaxy Watch6 series, starting from Korea, which means that the beta testers can now download the stable version of One UI 8 Watch. This was a very long wait after the release of the stable version of One UI 8 Watch back in July for the Galaxy Watch8 and Watch Ultra.

The USA will have to wait a bit longer, as we haven’t seen any update regarding the closure of the beta program there yet. If you’re not a beta tester, or if you’re on a cellular network, you may have to wait a bit longer.

You can identify the stable release with the CYK2 version as the build version for your Galaxy Watch6.

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#android #galaxyWatch6 #galaxyWatch6Classic #news #oneUi #samsung #samsungGalaxyWatch6 #samsungGalaxyWatch6Classic #smartwatch #smartwatches #tech #technology #update #watch6 #watch6Classic

Galaxy Watch6 Manager gets a new update ahead of One UI 8!

Samsung has recently released the Galaxy Watch6 Manager update today. This is done as Samsung gets ready for the One UI 8.0 Watch update that will bring a redesigned interface to match the One UI 8.0 and 7.0’s aesthetics. This is done to update the Galaxy Watch6 Manager app to get ready for One UI 8.0 Watch that will be released later.

The version that you’ll receive is version 2.2.13.25110651.

Your phone should automatically update your Galaxy Watch6 Manager app. To update the Galaxy Watch6 Manager app, follow these steps:

• Open Galaxy Store
• Navigate to Updates
• You should see “Galaxy Watch6 Manager”
• Press the update button
• Wait until the update finishes

Another way to update the manager is to open the Wearable app, navigate to Settings > About, and tap on “Update now” if the update is available.

#Android #GalaxyWatch6 #GalaxyWatch6Classic #news #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #smartwatch #Smartwatches #Tech #Technology #update #Watch6 #Watch6Classic

Galaxy Watch5 One UI 8 Watch Beta Program is now open!

As Samsung announced the availability of the Galaxy Watch Beta program in an article, the company has opened the Galaxy Watch Beta Program for the Galaxy Watch5 series in Korea (Wi-Fi, LTE) and in the USA (Wi-Fi, LTE connected to T-Mobile).

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page, the same method as we have showcased earlier for the Galaxy S25 One UI 8 Beta opened May 28th.

In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
   • If you’re using the Galaxy Watch in the USA, make sure that you are on the active plan with T-Mobile.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 8 Watch5 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 8 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

#Android #GalaxyWatch5 #GalaxyWatch6 #GalaxyWatch7 #GalaxyWatch5 #GalaxyWatch6 #GalaxyWatch6Classic #GalaxyWatch7 #news #oneUi #Samsung #SamsungGalaxyWatch5 #SamsungGalaxyWatch6 #SamsungGalaxyWatch7 #SamsungGalaxyWatch5 #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #SamsungGalaxyWatch7 #smartwatch #Smartwatches #Tech #Technology #update #Watch5 #Watch6 #Watch7 #Watch5 #Watch6 #Watch6Classic #Watch7

One UI 8 Watch Beta 5 released for Galaxy Watch6!

Samsung has released the fifth beta of One UI 8 Watch set to be released later this year. This beta version is applicable to Galaxy Watch6 users only, since the Ultra has already received the stable version back on July in preparation for the 2025 rebooted version launch.

This is a late report from November 8th when the fifth beta was released.

The following changes were made in the ZYK2 version:

• Performance Issue Improvement
• Improved the issue of incorrect time display when DST is set.

The following firmware information is available:

• SM-R960: R960XXU1ZYK2 [KOO, XAA]
• SM-R950: R950XXU1ZYK2 [KOO, XAA]
• SM-R940: R940XXU1ZYK2 [KOO, XAA]
• SM-R930: R930XXU1ZYK2 [KOO, XAA]
• SM-R965N: R965NKOU1ZYK2 [KOO, SKC, KTC, LUC, OSC]
• SM-R955N: R955NKOU1ZYK2 [KOO, SKC, KTC, LUC, OSC]
• SM-R945N: R945NKOU1ZYK2 [KOO, SKC, KTC, LUC, OSC]
• SM-R935N: R935NKOU1ZYK2 [KOO, SKC, KTC, LUC, OSC]
• SM-R965U: R965USQU1ZYK2 [TMB]
• SM-R955U: R955USQU1ZYK2 [TMB]
• SM-R945U: R945USQU1ZYK2 [TMB]
• SM-R935U: R935USQU1ZYK2 [TMB]

Galaxy Watch8 comes with the One UI 8 Watch, which Samsung is constantly working on through the beta program for older smartwatches, while the newest smartwatches are getting constant updates.

#Android #GalaxyWatch6 #GalaxyWatch6Classic #news #oneUi #OneUI8Watch #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #Tech #Technology #update #Warch6 #Watch6 #Watch6Classic

One UI 8 Watch Beta 4 released for Galaxy Watch6!

Samsung has released the fourth beta of One UI 8 Watch set to be released later this year. This beta version is applicable to Galaxy Watch6 users only, since the Ultra has already received the stable version back on July in preparation for the 2025 rebooted version launch. This is according to a beta tester on Korean Samsung Members community forums.

As much as we hate the Chococooky font, we’ve included the proof of update below.

We can’t determine whether the final build is after this beta version or not, but if there are no more Z builds, this means that the stable release is close.

The following changes were made in the ZYJ6 version:

• Improvement of performance issues
• Improvement of GPS issues

The following firmware information is available:

• SM-R960: R960XXU1ZYJ6 [KOO, XAA]
• SM-R950: R950XXU1ZYJ6 [KOO, XAA]
• SM-R940: R940XXU1ZYJ6 [KOO, XAA]
• SM-R930: R930XXU1ZYJ6 [KOO, XAA]
• SM-R965N: R965NKOU1ZYJ6 [KOO, SKC, KTC, LUC, OSC]
• SM-R955N: R955NKOU1ZYJ6 [KOO, SKC, KTC, LUC, OSC]
• SM-R945N: R945NKOU1ZYJ6 [KOO, SKC, KTC, LUC, OSC]
• SM-R935N: R935NKOU1ZYJ6 [KOO, SKC, KTC, LUC, OSC]
• SM-R965U: R965USQU1ZYJ6 [TMB]
• SM-R955U: R955USQU1ZYJ6 [TMB]
• SM-R945U: R945USQU1ZYJ6 [TMB]
• SM-R935U: R935USQU1ZYJ6 [TMB]

Galaxy Watch8 comes with the One UI 8 Watch, which Samsung is constantly working on through the beta program for older smartwatches, while the newest smartwatches are getting constant updates.

#Android #GalaxyWatch6 #GalaxyWatch6Classic #news #oneUi #OneUI8Watch #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #Tech #Technology #update #Warch6 #Watch6 #Watch6Classic

One UI 8 Watch Beta 3 released for Galaxy Watch6!

Samsung has released the third beta of One UI 8 Watch set to be released later this year. This beta version is applicable to Galaxy Watch6 users only, since the Ultra has already received the stable version back on July in preparation for the 2025 rebooted version launch. This is according to Alfatürk on X.

The following changes were made in the ZYJ5 version:

• Improvement of performance issues
• Fixed an issue where voice recording did not work properly
• Fix for media controller not working properly

The following firmware information is available:

• SM-R960: R960XXU1ZYI5 [KOO, XAA]
• SM-R950: R950XXU1ZYI5 [KOO, XAA]
• SM-R940: R940XXU1ZYI5 [KOO, XAA]
• SM-R930: R930XXU1ZYI5 [KOO, XAA]
• SM-R965N: R965NKOU1ZYI5 [KOO, SKC, KTC, LUC, OSC]
• SM-R955N: R955NKOU1ZYI5 [KOO, SKC, KTC, LUC, OSC]
• SM-R945N: R945NKOU1ZYI5 [KOO, SKC, KTC, LUC, OSC]
• SM-R935N: R935NKOU1ZYI5 [KOO, SKC, KTC, LUC, OSC]
• SM-R965U: R965USQU1ZYI5 [TMB]
• SM-R955U: R955USQU1ZYI5 [TMB]
• SM-R945U: R945USQU1ZYI5 [TMB]
• SM-R935U: R935USQU1ZYI5 [TMB]

Galaxy Watch8 comes with the One UI 8 Watch, which Samsung is constantly working on through the beta program for older smartwatches, while the newest smartwatches are getting constant updates.

#Android #GalaxyWatch6 #GalaxyWatch6Classic #news #oneUi #OneUI8Watch #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #Tech #Technology #update #Warch6 #Watch6 #Watch6Classic

One UI 8 Watch Beta 2 released for Galaxy Watch6!

Samsung has released the second beta of the One UI 8 Watch set to be released later this year. This beta version is applicable to Galaxy Watch6 users only, since the Ultra has already received the stable version back on July in preparation for the 2025 rebooted version launch.

The following changes were made in the ZYI5 version:

• Performance-related issues improved
• Fixed an issue where customized services would not turn on after connecting a new phone
• Fixed an issue where AOD would not function properly when setting certain Watchfaces

The following firmware information is available:

• SM-R960: R960XXU1ZYI5 [KOO, XAA]
• SM-R950: R950XXU1ZYI5 [KOO, XAA]
• SM-R940: R940XXU1ZYI5 [KOO, XAA]
• SM-R930: R930XXU1ZYI5 [KOO, XAA]
• SM-R965N: R965NKOU1ZYI5 [KOO, SKC, KTC, LUC, OSC]
• SM-R955N: R955NKOU1ZYI5 [KOO, SKC, KTC, LUC, OSC]
• SM-R945N: R945NKOU1ZYI5 [KOO, SKC, KTC, LUC, OSC]
• SM-R935N: R935NKOU1ZYI5 [KOO, SKC, KTC, LUC, OSC]
• SM-R965U: R965USQU1ZYI5 [TMB]
• SM-R955U: R955USQU1ZYI5 [TMB]
• SM-R945U: R945USQU1ZYI5 [TMB]
• SM-R935U: R935USQU1ZYI5 [TMB]

Galaxy Watch8 comes with the One UI 8 Watch, which Samsung is constantly working on through the beta program for older smartwatches, while the newest smartwatches are getting constant updates.

#Android #GalaxyWatch6 #GalaxyWatch6Classic #news #oneUi #OneUI8Watch #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #Tech #Technology #update #Warch6 #Watch6 #Watch6Classic

Galaxy Watch6 Beta Program is now open!

As Samsung announced the availability of the Galaxy Watch Beta program in an article, the company has opened the Galaxy Watch Beta Program for the Galaxy Watch6 series in Korea. The USA rollout will follow soon, and is expected to be available for the Wi-Fi version.

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page, the same method as we have showcased earlier for the Galaxy S25 One UI 8 Beta opened May 28th.

In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 8 Watch6 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 8 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

#Android #GalaxyWatch5 #GalaxyWatch6 #GalaxyWatch7 #GalaxyWatch5 #GalaxyWatch6 #GalaxyWatch6Classic #GalaxyWatch7 #news #oneUi #Samsung #SamsungGalaxyWatch5 #SamsungGalaxyWatch6 #SamsungGalaxyWatch7 #SamsungGalaxyWatch5 #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #SamsungGalaxyWatch7 #smartwatch #Smartwatches #Tech #Technology #update #Watch5 #Watch6 #Watch7 #Watch5 #Watch6 #Watch6Classic #Watch7

EXCLUSIVE: Galaxy Watch6 and Watch5 are not eligible for the One UI 8 Watch Beta

Samsung has planned to start the One UI 8 Watch Beta Program for the Galaxy smartwatches. Since then, we’ve seen only the Galaxy Watch7 and Watch Ultra getting their One UI 8 Beta program in Korea and USA, with the latter ending its Beta program as soon as Galaxy Watch8 was released on July.

With many anticipation as to when Galaxy Watch6 and Watch5 would at least get their Beta Program, we had expected this program to start for the 2023 and 2022 smartwatches. Unfortunately, we’ve not seen anything until now.

The good news is that Samsung is currently working on the stable version for both the Galaxy Watch6 and Watch5 as it looks like that they’ve skipped the beta program for the two smartwatches. We have information that Samsung will not open the Beta Program for the two smartwatches as they’re not eligible, as confirmed by the beta moderator. The following response to our inquiry confirms this:

Instead, just like Galaxy Watch4, they’ll get the stable update directly. This means that you will be able to experience the stable version directly when it releases, starting from the Galaxy Watch7 devices on October.

Are you ready for the One UI 8 Watch update?

#Android #Android16 #GalaxyWatch6 #GalaxyWatch6Classic #news #oneUi #OneUI8 #OneUI8Watch #OneUI8WatchBeta #OneUI80 #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #Tech #Technology #update #Watch6 #Watch6Classic

Galaxy Watch6 is a step closer to the stable One UI 8 Watch release!

Samsung has announced that the One UI 8 Watch Beta Program will be expanded according to the official newsroom entry. However, we have seen no beta program for both the Galaxy Watch6 and the Watch5 smartwatches, unlike what the article claimed:

Users based in Korea and the United States with Galaxy Watch models (Galaxy Watch5 series or later released Galaxy Watch series) are eligible to join the beta program.

This is bad news if you expect a beta program for the Galaxy Watch6, as the Watch5 could follow the same pattern of not having the beta program. Fortunately, a new stable build for the Galaxy Watch6 has been spotted in the official testing servers!

For completeness, we have compiled a list of available firmware info below:

• SM-R960: R960XXU1CYI4 [KOO, XAA]
• SM-R950: R950XXU1CYI4 [KOO, XAA]
• SM-R940: R940XXU1CYI4 [KOO, XAA]
• SM-R930: R930XXU1CYI4 [KOO, XAA]
• SM-R965U: R965USQU1CYI4 [TMB]
• SM-R955U: R955USQU1CYI4 [TMB]
• SM-R945U: R945USQU1CYI4 [TMB]
• SM-R935U: R935USQU1CYI4 [TMB]

This is in line with the expected release date of the Galaxy Watch6 One UI 8 update in October 1st according to Güncel Miyiz, but nothing has been announced so far. We’ll post further updates as the watch update is in progress.

#Android #GalaxyWatch6 #GalaxyWatch6Classic #news #oneUi #OneUI8 #OneUI8Watch #OneUI80 #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #Tech #Technology #update #Watch6 #Watch6Classic

More Galaxy smartwatches to get One UI 8 Watch soon

One UI 8 Watch was officially released to this year’s smartwatches introduced to us back in July 2025 in the Galaxy Unpacked event. The Galaxy Watch8 and the Watch Ultra have both been provided the One UI 8 Watch software to enable users to use the new features, including the redesigned UI elements (inspired by One UI 7), the Now Bar, and the revamped application listing.

Moreover, the Galaxy Watch7 is still in the beta program, which was released on June 30th, until now, with the Galaxy Watch6 and Watch5 still waiting for their official release, if not for the Beta Program to open.

Nevertheless, we are getting closer and closer to the official One UI 8 release for both the smartphones and the smartwatches, with new features being on the way to the older Galaxy devices when the gradual rollout starts. The Galaxy Watch7 and Watch6 smartwatches are expected to get their One UI 8 Watch update on October 1st according to Güncel Miyiz, but this date may not be the day.

Since the One UI 8 Watch Beta program started, we had the following Beta versions released for the Galaxy Watch7:

• One UI 8 Watch Beta 1 (build ZYFE): June 30th, 2025
• One UI 8 Watch Beta 2 (build ZYH2): August 12th, 2025
• One UI 8 Watch Beta 3 (build ZYHA): August 26th, 2025
• One UI 8 Watch Beta 4 (build ZYI2): September 5th, 2025
• One UI 8 Watch Beta 5 (build ZYI4): September 12th, 2025

To recap, here are the new features that will make it to some of the older smartwatches, according to the changelogs:

One UI 8 Watch Upgrade

Get things done

Stay on top of important tasks with the Now bar
Check the information you need right now and start essential features straight from your watch face. Ongoing tasks will appear in the Now bar at the bottom of your watch face so you can check key information quickly.

Do more with double pinch
Just pinch your thumb and index finger together twice to scroll through notifications, control music, take pictures, and more. You can also customize what happens when you double pinch on the watch face, music controller, as well as alarm, calendar, and reminder alerts. Choose the actions you need most in each situation.

Mark reminders as important
Mark reminders as important by tapping the Star icon. Important reminders will appear at the top of your reminder list to make sure you notice them.

Get reminders at specific places
You can now set location-based reminders on your watch. For example, you can make your watch remind you to do the laundry when you arrive at home.

New charging effects
When your watch is charging, the new screen layout and animations make it easier to check the current battery level and remaining charging time.

Stay connected

Easily respond to notifications and alerts
Use gestures to quickly respond to notifications and alerts. When a notification appears, you can double pinch to view the details or send a reply. You can also shake your wrist to return to the watch face.

Enhanced notification view
Notifications on your watch are now easier to use with an attractive new design. Notifications from the same app are stacked vertically, allowing you to view more notifications with fewer swipes.

Smarter notification settings
It’s now easier to decide how to receive notifications from your phone on your watch. If you choose Smart device selection, notifications will appear on your phone only when you’re using it and on your watch when you’re not using your phone. If you choose Always show on both, notifications will always appear on both your phone and watch.

Upgrade your health

Bedtime guidance
Get to sleep at the right time so you wake up feeling refreshed. The new Bedtime guidance feature analyzes your sleep data and recommends the best time to go to sleep each night.

Mindfulness
Manage stress and anxiety in your daily life with the new Mindfulness feature in Samsung Health. You can keep track of your moods and emotions and practice breathing exercises to reduce stress.

Tailored to you

Find the perfect watch face
It’s now easier to find the watch face that’s right for you. Just choose a few keywords such as your preferred style, color, and information to show. The best matches will be suggested from our collection of more than 300 watch faces.

Recommended watch faces
Discover new watch faces that you might like. Watch faces with colors, style, or information similar to your current watch face will be recommended on the watch face selection screen.

Create your own tiles
Create your own custom tiles that show the information you need. You can even combine information from different apps into a single tile. You can include weather information, calendar events, reminders, and more.

Personalized Apps screen
Featured apps now appear at the top of your Apps screen to give you quick access to the apps you need the most. Apps will be featured based on how often you use them and other usage patterns. You can also view your apps as a list with names instead of only icons.

Choose calendars to show on your watch
You can now choose which calendars to show in the Calendar app on your watch. You can show all of the same calendars that are on your phone or customize to show only the calendars you need.

The following smartwatches are eligible to get the One UI 8 Watch update:

• Galaxy Watch Ultra (rolled out)
• Galaxy Watch7
• Galaxy Watch6
• Galaxy Watch5
• Galaxy Watch4
• Galaxy Watch FE

We are looking forward for future Galaxy Watch updates for the One UI 8 Watch update, which is expected to start its rollout soon.

#Android #GalaxyWatch4 #GalaxyWatch5 #GalaxyWatch6 #GalaxyWatch6Classic #GalaxyWatch7 #news #oneUi #OneUI8 #OneUI8Watch #OneUI80 #OneUI80Watch #Samsung #SamsungGalaxyWatch4 #SamsungGalaxyWatch5 #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #SamsungGalaxyWatch7 #Tech #Technology #update #Watch4 #Watch5 #Watch6 #Watch6Classic #Watch7

Galaxy Watch6, Watch7, and Watch Ultra LTE receive August 2025 security update in India!

Samsung has just released the August 2025 security patch in India for the LTE version of Galaxy Watch6, Watch7, and Watch Ultra (2024 original and 2025 reboot). This patch enhances your smartwatch’s security to make sure that you and your data are kept secure. This aligns with the quarterly cadence of the software update scheduling for five years of security updates and four generations of system updates.

The following firmware information is available:

• SM-L705F: L705FXXU1BYH6 [INS]
• SM-L315F: L315FXXU1AYH1 [INS]
• SM-L305F: L305FXXU1AYH1 [INS]
• SM-R965F: R965FXXS1BYH1 [INS]
• SM-R955F: R955FXXS1BYH1 [INS]
• SM-R945F: R945FXXS1BYH1 [INS]
• SM-R935F: R935FXXS1BYH1 [INS]

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#Android #Android14 #GalaxyWatch6 #GalaxyWatch6Classic #news #oneUi #OneUI6 #OneUI6Watch #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #Tech #Technology #update #Watch6 #Watch6Classic

Galaxy Watch6 and Watch5 are still waiting for their One UI 8 Watch Beta Program

The beta program for One UI 8 Watch, which was released to the Galaxy Watch8 and the 2025 reboot of the Watch Ultra, still didn’t start as of September 1st for the Galaxy Watch6 and Watch5 smartwatch series. The beta program targeted for the regular Galaxy Watch7 smartwatches is still running with the third beta on air, with build ZYHA.

Galaxy Watch6 and Watch5 users who are eager to try out the One UI 8 Watch Beta have spent almost the whole summer vacation without the One UI 8 Beta Program, even if the Watch7 users got it as a beta. Beta builds for the Galaxy Watch6 and Watch5 were being spotted, but there are no signs of the beta program being open for those two smartwatches from 2023 and 2022.

Samsung said that they’d be working on the beta version during the remaining months of this year, with the final release being expected by the end of the year, according to their official newsroom article released on June 16th, 2025. More specifically, one of the footer notes suggested that “users based in Korea and the United States with Galaxy Watch models (Galaxy Watch5 series or later released Galaxy Watch series) are eligible to join the beta program.”

For the Wi-Fi Galaxy Watch6 and Watch5 smartwatches, here are the latest testing versions available in both the USA and in Korea:

• Galaxy Watch6
  • R960XXU1ZYH6
  • R950XXU1ZYH6
  • R940XXU1ZYH6
  • R930XXU1ZYH6
• Galaxy Watch5
  • R920XXU1ZYH6
  • R910XXU1ZYH6
  • R900XXU1ZYH6

Samsung made sure that the beta program will definitely happen with those smartwatches as mentioned earlier in the official article, but there is still no clear date as to when they’ll release the beta program.

To close this article, here’s the recap of all One UI 8 Watch Beta versions released so far:

• Galaxy Watch Ultra
  • One UI 8 Watch Beta 1 (build ZYFE): June 30th, 2025
• Galaxy Watch7
  • One UI 8 Watch Beta 1 (build ZYFE): June 30th, 2025
  • One UI 8 Watch Beta 2 (build ZYH2): August 12th, 2025
  • One UI 8 Watch Beta 3 (build ZYHA): August 26th, 2025

We expect that Samsung release the beta program hopefully during this month, along with clear communication with the users of those smartwatches.

#Android #GalaxyWatch6 #GalaxyWatch5 #GalaxyWatch6 #GalaxyWatch6Classic #news #oneUi #OneUI8Watch #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #SamsungGalaxyWatch5 #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #Tech #Technology #update #Watch6 #Watch5 #Watch6 #Watch6Classic

Galaxy Watch6 receives a new August 2025 update!

Samsung has started rolling out a new software update that is rather massive to the Galaxy Watch6 series, starting from Korea. This happened according to Alfatürk on X. The flagship watches will be updated to the following versions:

• Galaxy Watch6 40mm (BT and Cellular, SM-R930/R935x): BYH1
• Galaxy Watch6 44mm (BT and Cellular, SM-R940/R945x): BYH1
• Galaxy Watch6 Classic 40mm (BT and Cellular, SM-R950/R955x): BYH1
• Galaxy Watch6 Classic 44mm (BT and Cellular, SM-R960/R965x): BYH1

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#Android #GalaxyWatch6 #GalaxyWatch6Classic #news #oneUi #OneUI6Watch #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #smartwatch #Smartwatches #Tech #Technology #update #Watch #Watch6 #Watch6Classic #Wearable

One UI 8 Watch Beta 2 will be released soon!

Looks like that we’ve seen some progress in the One UI 8 Watch Beta program for the Galaxy Watch7 series nearly two weeks after the Galaxy Watch Ultra has been updated! Today, we’ve spotted new Beta builds, corresponding to August builds, for the following Galaxy Watch7 smartwatch models (only the Beta eligible devices are listed):

• SM-L315N: L315NKOU1ZYH2 [KOO]
• SM-L315U: L315USQU1ZYH2 [TMB]
• SM-L305N: L305NKOU1ZYH2 [KOO]
• SM-L305U: L305USQU1ZYH2 [TMB]
• SM-L310: L310XXU1ZYH2 [XAA, KOO]
• SM-L300: L300XXU1ZYH2 [XAA, KOO]

The mystery has been solved, because Samsung has finally worked on the second Beta version of the One UI 8 Watch software for the Galaxy Watch7 series, which is a relief in itself. This was especially since there were no new beta builds for the entirety of July, which caused users to wonder if their Galaxy Watch7 smartwatches that joined the beta program would ever get an update.

Meanwhile, there are no new beta builds yet for either the Galaxy Watch6 or the Galaxy Watch5 smartwatches, but the above build mentioned should be a sign that the beta program for these smartwatches will start very soon.

One UI 8 Watch brings a design change to match the upcoming One UI 8 operating system for phones, while using the design aesthetics that come from One UI 7, which was released in April 17th.

#Android #GalaxyWatch5 #GalaxyWatch6 #GalaxyWatch7 #GalaxyWatch5 #GalaxyWatch6 #GalaxyWatch6Classic #GalaxyWatch7 #news #oneUi #OneUI8 #OneUI8Watch #OneUI8WatchBeta #Samsung #SamsungGalaxyWatch5 #SamsungGalaxyWatch6 #SamsungGalaxyWatch7 #SamsungGalaxyWatch5 #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #SamsungGalaxyWatch7 #Tech #Technology #update #Watch5 #Watch6 #Watch7 #Watch5 #Watch6 #Watch6Classic #Watch7

Galaxy Watch Beta Program is now open!

As Samsung announced the availability of the Galaxy Watch Beta program in an article, the company has opened the Galaxy Watch Beta Program for the Galaxy Watch7 series in Korea and the US. The new features, such as Vascular Load and Antioxidant Index that have been quietly revealed in Samsung Health, will only be available for the newest smartwatch models that will be released this year, alongside two features, Running Coach and AGEs Index, that will be available for Galaxy Watch7 or newer.

The software update is available for Galaxy Watch7 and Watch Ultra.

One UI 8 Watch Beta is now available for those who reside in the USA and in Korea and have the Wi-Fi version. You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page, the same method as we have showcased earlier for the Galaxy S25 One UI 8 Beta opened May 28th.

In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 8 Watch Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 8 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

#Android #GalaxyWatch5 #GalaxyWatch6 #GalaxyWatch7 #GalaxyWatch5 #GalaxyWatch6 #GalaxyWatch6Classic #GalaxyWatch7 #news #oneUi #Samsung #SamsungGalaxyWatch5 #SamsungGalaxyWatch6 #SamsungGalaxyWatch7 #SamsungGalaxyWatch5 #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #SamsungGalaxyWatch7 #smartwatch #Smartwatches #Tech #Technology #update #Watch5 #Watch6 #Watch7 #Watch5 #Watch6 #Watch6Classic #Watch7

One UI 8 Watch Features Revealed

One UI 8 Watch is in the works, and Samsung has officially revealed some of the One UI 8 Watch features that will make it to the latest of the smartwatches. According to Samsung, those features “help users build healthier habits.” Why? Because it take time to form lasting behavior patterns. Your Galaxy smartwatches will be more smarter with this update that adapts to the design language of One UI 7.

The following features will make it to the latest smartwatches:

• Bedtime Guidance (Android 11 or later, Samsung Health v6.30.2)
• Vascular Load (Galaxy Watch Ultra or later)
• Running Coach (Galaxy Watch7 or later)
• Antioxidant Index (Galaxy Watch Ultra or later)

Those features will be available to the limited amount of users through the One UI 8 Watch Beta Program, which will only be available in Korea and in the USA, later.

Bedtime guidance allows users to utilize such tool to optimize sleep based on the recommendations for the most optimal sleep according to the lifestyle and the sleep patterns. It also uses reminders to make users stay consistent in their sleep.

Vascular load meter measures the stress on the vascular system. The vascular system on your body is responsible for carrying blood through the entire body to deliver oxygen and other important nutrients and for getting rid of waste. Normally, when you sleep, stress on the vascular system gets reduced, but excessive fluctuations may negatively impact cardiovascular health. With this feature to land on the latest Galaxy Watch, you can receive insights into vascular load.

Running coach helps users train safely for running marathons through optimized intensity and injury-preventive routines. Due to over-pacing or under-training, many runners experience injuries during their running session. It offers real-time guidance during your run, along with the motivation, to create a personalized experience.

Finally, antioxidant index gives you an analytical data of how much balance of your antioxidant that you maintain. To support healthy aging and to prevent chronic illnesses, your Galaxy Watch will be able to measure your carotenoids in your skin.

#Android #GalaxyWatch5 #GalaxyWatch6 #GalaxyWatch7 #GalaxyWatchUltra #GalaxyWatch5 #GalaxyWatch6 #GalaxyWatch6Classic #GalaxyWatch7 #news #oneUi #OneUI8Watch #OneUIWatch8 #Samsung #SamsungGalaxyWatch5 #SamsungGalaxyWatch6 #SamsungGalaxyWatch7 #SamsungGalaxyWatchUltra #SamsungGalaxyWatch5 #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #SamsungGalaxyWatch7 #smartphone #Tech #Technology #update #Watch5 #Watch6 #Watch7 #WatchUltra #Watch5 #Watch6 #Watch6Classic #Watch7