#strida — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #strida, aggregated by home.social.
-
#30JoursàVélo sur la promenade des Anglais en #strida.
#30daysofbiking -
#30JoursàVélo sur la promenade des Anglais en #strida.
#30daysofbiking -
#30JoursàVélo sur la promenade des Anglais en #strida.
#30daysofbiking -
#30JoursàVélo sur la promenade des Anglais en #strida.
#30daysofbiking -
#30JoursàVélo sur la promenade des Anglais en #strida.
#30daysofbiking -
そんな感じで色々済まして #STRiDA で帰路に、16時前でもうすっかり夕方の光
なんか昨日の今日で随分黄葉紅葉が進んだ気がするﾈｰ… -
#STRiDA 速報
夜明けから作業してefneo 後継のG3ARED GTRO搭載できました！
この後色々ありましたが詳細はまた後ほど -
やっぱり #STRiDA 乗らないとなんかクサクサするので家人が寝静まってからマヨナカライドへ
24時間じゃない:lawson:増えたなーって…
街中の大通りには自転車通行帯があちこちある京都
ありがたいけど路駐やら寄せて走るクルマやらで人が多い時間は機能してないことも多いﾈｰ -
今日も #STRiDA は結局疏水ライドコースに、この道は葵の小径って名付けられてるらしい…暑いやっぱり中自販機が救い…
疏水沿いを走って高野川沿いを上がって北泉通に、高野川近年新たにかかった橋を渡って24時間スーパーに
いつもは店舗の前空いてるけど時間が遅いからか一杯になってたので脇の駐輪場に駐輪 -
帰りは坂を避けて比較的日陰のある道を #STRiDA で遠回り
結局また疎水ライドに…
松ヶ崎浄水場の給水塔？こういう不思議な造形の大きい建造物からしか得られない栄養がある -
復路… #STRiDA で7%の長い登り:muri:
:oreno_make:
押し歩きで登りきって大汗かいて帰宅しましたん -
-
Noch was Gutes am Kauf des #Strida Mk1: Ich kann einen #Sattel mehr am #Brompton ausprobieren. 😊
Und Zufall: Mein letzter grade noch guter Brompton-Sattel und dieser eher günstig wirkende Selle-Royal-Sattel sind beide von 2011.
Der von #Veloplus netterweise geliehen bekommene Veloplus-Artemis-Sattel ist mir auf Dauer zu weich. Der Selle Royal ist in Sachen Weichigkeit bzw. Härte irgendwo zwischen dem 2011er Brompton-Sattel und dem Artemis, aber näher am Brompton-Sattel.
-
Noch was Gutes am Kauf des #Strida Mk1: Ich kann einen #Sattel mehr am #Brompton ausprobieren. 😊
Und Zufall: Mein letzter grade noch guter Brompton-Sattel und dieser eher günstig wirkende Selle-Royal-Sattel sind beide von 2011.
Der von #Veloplus netterweise geliehen bekommene Veloplus-Artemis-Sattel ist mir auf Dauer zu weich. Der Selle Royal ist in Sachen Weichigkeit bzw. Härte irgendwo zwischen dem 2011er Brompton-Sattel und dem Artemis, aber näher am Brompton-Sattel.
-
Noch was Gutes am Kauf des #Strida Mk1: Ich kann einen #Sattel mehr am #Brompton ausprobieren. 😊
Und Zufall: Mein letzter grade noch guter Brompton-Sattel und dieser eher günstig wirkende Selle-Royal-Sattel sind beide von 2011.
Der von #Veloplus netterweise geliehen bekommene Veloplus-Artemis-Sattel ist mir auf Dauer zu weich. Der Selle Royal ist in Sachen Weichigkeit bzw. Härte irgendwo zwischen dem 2011er Brompton-Sattel und dem Artemis, aber näher am Brompton-Sattel.
-
Noch was Gutes am Kauf des #Strida Mk1: Ich kann einen #Sattel mehr am #Brompton ausprobieren. 😊
Und Zufall: Mein letzter grade noch guter Brompton-Sattel und dieser eher günstig wirkende Selle-Royal-Sattel sind beide von 2011.
Der von #Veloplus netterweise geliehen bekommene Veloplus-Artemis-Sattel ist mir auf Dauer zu weich. Der Selle Royal ist in Sachen Weichigkeit bzw. Härte irgendwo zwischen dem 2011er Brompton-Sattel und dem Artemis, aber näher am Brompton-Sattel.
-
Noch was Gutes am Kauf des #Strida Mk1: Ich kann einen #Sattel mehr am #Brompton ausprobieren. 😊
Und Zufall: Mein letzter grade noch guter Brompton-Sattel und dieser eher günstig wirkende Selle-Royal-Sattel sind beide von 2011.
Der von #Veloplus netterweise geliehen bekommene Veloplus-Artemis-Sattel ist mir auf Dauer zu weich. Der Selle Royal ist in Sachen Weichigkeit bzw. Härte irgendwo zwischen dem 2011er Brompton-Sattel und dem Artemis, aber näher am Brompton-Sattel.
-
Bin meine heutige #BikeStreak-Runde (also die für Sonntag, Tag 98) mit meinem #Strida #Faltrad aus den frühen 90ern geradelt, weil das eine Brompton für die Fahrt zum #HOA2024 schon verladen und das andere wg. MountainDrive-Einbau beim Mech ist. Dabei ist mir aufgrund der eher gemütlich verzögernden Trommelbremsen (ja, Plural 🙈) auch ein Name für das Strida gekommen: #AlterFalter! 😜
Frage mich grade, ob ich das als reflektierenden Schriftzug schwarz auf schwarz drauf machen soll. 😁
Cc @thebinh
-
Bin meine heutige #BikeStreak-Runde (also die für Sonntag, Tag 98) mit meinem #Strida #Faltrad aus den frühen 90ern geradelt, weil das eine Brompton für die Fahrt zum #HOA2024 schon verladen und das andere wg. MountainDrive-Einbau beim Mech ist. Dabei ist mir aufgrund der eher gemütlich verzögernden Trommelbremsen (ja, Plural 🙈) auch ein Name für das Strida gekommen: #AlterFalter! 😜
Frage mich grade, ob ich das als reflektierenden Schriftzug schwarz auf schwarz drauf machen soll. 😁
Cc @thebinh
-
Bin meine heutige #BikeStreak-Runde (also die für Sonntag, Tag 98) mit meinem #Strida #Faltrad aus den frühen 90ern geradelt, weil das eine Brompton für die Fahrt zum #HOA2024 schon verladen und das andere wg. MountainDrive-Einbau beim Mech ist. Dabei ist mir aufgrund der eher gemütlich verzögernden Trommelbremsen (ja, Plural 🙈) auch ein Name für das Strida gekommen: #AlterFalter! 😜
Frage mich grade, ob ich das als reflektierenden Schriftzug schwarz auf schwarz drauf machen soll. 😁
Cc @thebinh
-
Bin meine heutige #BikeStreak-Runde (also die für Sonntag, Tag 98) mit meinem #Strida #Faltrad aus den frühen 90ern geradelt, weil das eine Brompton für die Fahrt zum #HOA2024 schon verladen und das andere wg. MountainDrive-Einbau beim Mech ist. Dabei ist mir aufgrund der eher gemütlich verzögernden Trommelbremsen (ja, Plural 🙈) auch ein Name für das Strida gekommen: #AlterFalter! 😜
Frage mich grade, ob ich das als reflektierenden Schriftzug schwarz auf schwarz drauf machen soll. 😁
Cc @thebinh
-
Bin meine heutige #BikeStreak-Runde (also die für Sonntag, Tag 98) mit meinem #Strida #Faltrad aus den frühen 90ern geradelt, weil das eine Brompton für die Fahrt zum #HOA2024 schon verladen und das andere wg. MountainDrive-Einbau beim Mech ist. Dabei ist mir aufgrund der eher gemütlich verzögernden Trommelbremsen (ja, Plural 🙈) auch ein Name für das Strida gekommen: #AlterFalter! 😜
Frage mich grade, ob ich das als reflektierenden Schriftzug schwarz auf schwarz drauf machen soll. 😁
Cc @thebinh
-
#BikeStreak, Day 83: An 1.5km midnight ride on the #Strida to test the battery lights I bought for it. It was immediately clear for me that a pair of #Knog Big Cobber are perfect for it as "be seen" lights: https://www.knog.com/products/big-cobber-bike-light-set
The "to see" light and especially its mount point were less obvious: I used a #Lezyne USB LED headlight I already had. First mounted it to the seat tube (!) to point downwards, but the steering tube gave the expected shadow. Now it's mounted to a brake Bowden wire. 🤪
-
#BikeStreak, Day 83: An 1.5km midnight ride on the #Strida to test the battery lights I bought for it. It was immediately clear for me that a pair of #Knog Big Cobber are perfect for it as "be seen" lights: https://www.knog.com/products/big-cobber-bike-light-set
The "to see" light and especially its mount point were less obvious: I used a #Lezyne USB LED headlight I already had. First mounted it to the seat tube (!) to point downwards, but the steering tube gave the expected shadow. Now it's mounted to a brake Bowden wire. 🤪
-
#BikeStreak, Day 83: An 1.5km midnight ride on the #Strida to test the battery lights I bought for it. It was immediately clear for me that a pair of #Knog Big Cobber are perfect for it as "be seen" lights: https://www.knog.com/products/big-cobber-bike-light-set
The "to see" light and especially its mount point were less obvious: I used a #Lezyne USB LED headlight I already had. First mounted it to the seat tube (!) to point downwards, but the steering tube gave the expected shadow. Now it's mounted to a brake Bowden wire. 🤪
-
#BikeStreak, Day 83: An 1.5km midnight ride on the #Strida to test the battery lights I bought for it. It was immediately clear for me that a pair of #Knog Big Cobber are perfect for it as "be seen" lights: https://www.knog.com/products/big-cobber-bike-light-set
The "to see" light and especially its mount point were less obvious: I used a #Lezyne USB LED headlight I already had. First mounted it to the seat tube (!) to point downwards, but the steering tube gave the expected shadow. Now it's mounted to a brake Bowden wire. 🤪
-
#BikeStreak, Day 83: An 1.5km midnight ride on the #Strida to test the battery lights I bought for it. It was immediately clear for me that a pair of #Knog Big Cobber are perfect for it as "be seen" lights: https://www.knog.com/products/big-cobber-bike-light-set
The "to see" light and especially its mount point were less obvious: I used a #Lezyne USB LED headlight I already had. First mounted it to the seat tube (!) to point downwards, but the steering tube gave the expected shadow. Now it's mounted to a brake Bowden wire. 🤪
-
#BikeStreak, Days 78-81:
#78 (Mon): Another test ride with my #Strida, 2× around the block (1.2km): Even after tightening the rear hinge screw, it's still wobbly. Got some advice at https://www.stridaforum.com/t/new-vintage-strida-owner/4510/2
#79 (Tue): Normal commute, 8.1km
#80 (Wed/Picture): Planned a "just around the block" ride, ended up with riding through the whole quarter and through the Käferberg forest. 11.5km #ZurichByNight
#81 (Thu): Normal commute in the morning, slight deviation for groceries in the evening. 8.9km
-
#BikeStreak, Days 78-81:
#78 (Mon): Another test ride with my #Strida, 2× around the block (1.2km): Even after tightening the rear hinge screw, it's still wobbly. Got some advice at https://www.stridaforum.com/t/new-vintage-strida-owner/4510/2
#79 (Tue): Normal commute, 8.1km
#80 (Wed/Picture): Planned a "just around the block" ride, ended up with riding through the whole quarter and through the Käferberg forest. 11.5km #ZurichByNight
#81 (Thu): Normal commute in the morning, slight deviation for groceries in the evening. 8.9km
-
#BikeStreak, Days 78-81:
#78 (Mon): Another test ride with my #Strida, 2× around the block (1.2km): Even after tightening the rear hinge screw, it's still wobbly. Got some advice at https://www.stridaforum.com/t/new-vintage-strida-owner/4510/2
#79 (Tue): Normal commute, 8.1km
#80 (Wed/Picture): Planned a "just around the block" ride, ended up with riding through the whole quarter and through the Käferberg forest. 11.5km #ZurichByNight
#81 (Thu): Normal commute in the morning, slight deviation for groceries in the evening. 8.9km
-
#BikeStreak, Days 78-81:
#78 (Mon): Another test ride with my #Strida, 2× around the block (1.2km): Even after tightening the rear hinge screw, it's still wobbly. Got some advice at https://www.stridaforum.com/t/new-vintage-strida-owner/4510/2
#79 (Tue): Normal commute, 8.1km
#80 (Wed/Picture): Planned a "just around the block" ride, ended up with riding through the whole quarter and through the Käferberg forest. 11.5km #ZurichByNight
#81 (Thu): Normal commute in the morning, slight deviation for groceries in the evening. 8.9km
-
#BikeStreak, Days 78-81:
#78 (Mon): Another test ride with my #Strida, 2× around the block (1.2km): Even after tightening the rear hinge screw, it's still wobbly. Got some advice at https://www.stridaforum.com/t/new-vintage-strida-owner/4510/2
#79 (Tue): Normal commute, 8.1km
#80 (Wed/Picture): Planned a "just around the block" ride, ended up with riding through the whole quarter and through the Käferberg forest. 11.5km #ZurichByNight
#81 (Thu): Normal commute in the morning, slight deviation for groceries in the evening. 8.9km
-
#BikeStreak, Day 76 + #NewBikeDay: A short ride with my new vintage #Strida Mk1 through the quarter. It's a quite groaning #foldingbike with all those plastic parts. But it's also very light. Something's also creaking if I pedal rather strong, maybe it's the freewheeling which is not in the rear hub but in the bottom bracket 🤪, i.e. the belt + chainring always turn if the bike is rolling. Also found a loose screw that overrun when I tried to fasten it. Probably need to replace it.
-
#BikeStreak, Day 76 + #NewBikeDay: A short ride with my new vintage #Strida Mk1 through the quarter. It's a quite groaning #foldingbike with all those plastic parts. But it's also very light. Something's also creaking if I pedal rather strong, maybe it's the freewheeling which is not in the rear hub but in the bottom bracket 🤪, i.e. the belt + chainring always turn if the bike is rolling. Also found a loose screw that overrun when I tried to fasten it. Probably need to replace it.
-
#BikeStreak, Day 76 + #NewBikeDay: A short ride with my new vintage #Strida Mk1 through the quarter. It's a quite groaning #foldingbike with all those plastic parts. But it's also very light. Something's also creaking if I pedal rather strong, maybe it's the freewheeling which is not in the rear hub but in the bottom bracket 🤪, i.e. the belt + chainring always turn if the bike is rolling. Also found a loose screw that overrun when I tried to fasten it. Probably need to replace it.
-
#BikeStreak, Day 76 + #NewBikeDay: A short ride with my new vintage #Strida Mk1 through the quarter. It's a quite groaning #foldingbike with all those plastic parts. But it's also very light. Something's also creaking if I pedal rather strong, maybe it's the freewheeling which is not in the rear hub but in the bottom bracket 🤪, i.e. the belt + chainring always turn if the bike is rolling. Also found a loose screw that overrun when I tried to fasten it. Probably need to replace it.
-
#BikeStreak, Day 76 + #NewBikeDay: A short ride with my new vintage #Strida Mk1 through the quarter. It's a quite groaning #foldingbike with all those plastic parts. But it's also very light. Something's also creaking if I pedal rather strong, maybe it's the freewheeling which is not in the rear hub but in the bottom bracket 🤪, i.e. the belt + chainring always turn if the bike is rolling. Also found a loose screw that overrun when I tried to fasten it. Probably need to replace it.
-
#NewBikeDay #Nplus1: I bought another #foldingbike. But one much more wacky (and more wobbly 🤪) than a Brompton. It's a #Strida Mk1 from the late 80s or early 90s. Also British. More and especially more pictures later.
And no, I won't stop riding Bromptons. 😉
-
#NewBikeDay #Nplus1: I bought another #foldingbike. But one much more wacky (and more wobbly 🤪) than a Brompton. It's a #Strida Mk1 from the late 80s or early 90s. Also British. More and especially more pictures later.
And no, I won't stop riding Bromptons. 😉
-
#NewBikeDay #Nplus1: I bought another #foldingbike. But one much more wacky (and more wobbly 🤪) than a Brompton. It's a #Strida Mk1 from the late 80s or early 90s. Also British. More and especially more pictures later.
And no, I won't stop riding Bromptons. 😉
-
#NewBikeDay #Nplus1: I bought another #foldingbike. But one much more wacky (and more wobbly 🤪) than a Brompton. It's a #Strida Mk1 from the late 80s or early 90s. Also British. More and especially more pictures later.
And no, I won't stop riding Bromptons. 😉
-
#NewBikeDay #Nplus1: I bought another #foldingbike. But one much more wacky (and more wobbly 🤪) than a Brompton. It's a #Strida Mk1 from the late 80s or early 90s. Also British. More and especially more pictures later.
And no, I won't stop riding Bromptons. 😉
-
Et un #Strida, un ! 🤩
-
Et un #Strida, un ! 🤩
-
Et un #Strida, un ! 🤩
-
Et un #Strida, un ! 🤩
-
Friend of mine recently invested in 3D printer and I asked him to print a wall hanger for my Strida LT foldable bike. I got it yesterday and mounted it today.
I wasn’t sure how it will turn up, but it works and looks great. Most importantly, my commuter is now standing vertically without any risk of falling down.#cycling #bikestorage #Strida #StridaLT #foldablebike #smallspaces #bikestoragesolution #commuterbike #3dprinted #3dprinting #3dprintedhomeaccessories
-
Friend of mine recently invested in 3D printer and I asked him to print a wall hanger for my Strida LT foldable bike. I got it yesterday and mounted it today.
I wasn’t sure how it will turn up, but it works and looks great. Most importantly, my commuter is now standing vertically without any risk of falling down.#cycling #bikestorage #Strida #StridaLT #foldablebike #smallspaces #bikestoragesolution #commuterbike #3dprinted #3dprinting #3dprintedhomeaccessories
-
Friend of mine recently invested in 3D printer and I asked him to print a wall hanger for my Strida LT foldable bike. I got it yesterday and mounted it today.
I wasn’t sure how it will turn up, but it works and looks great. Most importantly, my commuter is now standing vertically without any risk of falling down.#cycling #bikestorage #Strida #StridaLT #foldablebike #smallspaces #bikestoragesolution #commuterbike #3dprinted #3dprinting #3dprintedhomeaccessories
-
Friend of mine recently invested in 3D printer and I asked him to print a wall hanger for my Strida LT foldable bike. I got it yesterday and mounted it today.
I wasn’t sure how it will turn up, but it works and looks great. Most importantly, my commuter is now standing vertically without any risk of falling down.#cycling #bikestorage #Strida #StridaLT #foldablebike #smallspaces #bikestoragesolution #commuterbike #3dprinted #3dprinting #3dprintedhomeaccessories