home.social

#smartctl — Public Fediverse posts

Live and recent posts from across the Fediverse tagged #smartctl, aggregated by home.social.

  1. Well, the drive is barely limping along but not quite dead yet. I have a replacement arriving tonight, though.

    Apparently a 191 G-Sense_Error_Rate of 365621 is kind of high, as is the 187 Reported_Uncorrect of 9.

    Annoyingly, #smartctl didn't alert me to any errors until it lost communication with the drive entirely.

    SMART results for anyone curious:

    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x000f   081   064   044    Pre-fail  Always       -       122031443
      3 Spin_Up_Time            0x0003   089   088   000    Pre-fail  Always       -       0
      4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       189
      5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
      7 Seek_Error_Rate         0x000f   076   060   045    Pre-fail  Always       -       44359102
      9 Power_On_Hours          0x0032   023   023   000    Old_age   Always       -       67754 (130 186 0)
     10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
     12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       128
    184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
    187 Reported_Uncorrect      0x0032   091   091   000    Old_age   Always       -       9
    188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       65539
    189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
    190 Airflow_Temperature_Cel 0x0022   069   042   040    Old_age   Always       -       31 (Min/Max 29/31)
    191 G-Sense_Error_Rate      0x0032   001   001   000    Old_age   Always       -       365621
    192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       301
    193 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       2959
    194 Temperature_Celsius     0x0022   031   058   000    Old_age   Always       -       31 (0 18 0 0 0)
    195 Hardware_ECC_Recovered  0x001a   005   001   000    Old_age   Always       -       122031443
    197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
    198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
    199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
    240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       67416 (4 170 0)
    241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       6290749324399
    242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       6777561571545
    
    

    The drive itself is a #Seagate EXOS ST8000NM0105.
    #zfs #raid #selfhosted #homeserver

  2. Well, the drive is barely limping along but not quite dead yet. I have a replacement arriving tonight, though.

    Apparently a 191 G-Sense_Error_Rate of 365621 is kind of high, as is the 187 Reported_Uncorrect of 9.

    Annoyingly, #smartctl didn't alert me to any errors until it lost communication with the drive entirely.

    SMART results for anyone curious:

    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x000f   081   064   044    Pre-fail  Always       -       122031443
      3 Spin_Up_Time            0x0003   089   088   000    Pre-fail  Always       -       0
      4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       189
      5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
      7 Seek_Error_Rate         0x000f   076   060   045    Pre-fail  Always       -       44359102
      9 Power_On_Hours          0x0032   023   023   000    Old_age   Always       -       67754 (130 186 0)
     10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
     12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       128
    184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
    187 Reported_Uncorrect      0x0032   091   091   000    Old_age   Always       -       9
    188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       65539
    189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
    190 Airflow_Temperature_Cel 0x0022   069   042   040    Old_age   Always       -       31 (Min/Max 29/31)
    191 G-Sense_Error_Rate      0x0032   001   001   000    Old_age   Always       -       365621
    192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       301
    193 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       2959
    194 Temperature_Celsius     0x0022   031   058   000    Old_age   Always       -       31 (0 18 0 0 0)
    195 Hardware_ECC_Recovered  0x001a   005   001   000    Old_age   Always       -       122031443
    197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
    198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
    199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
    240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       67416 (4 170 0)
    241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       6290749324399
    242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       6777561571545
    
    

    The drive itself is a #Seagate EXOS ST8000NM0105.
    #zfs #raid #selfhosted #homeserver

  3. Horror story in two lines:

    ```
    Device: /dev/ada0, 24 Currently unreadable (pending) sectors.
    Device: /dev/ada0, 24 Offline uncorrectable sectors.
    ```

    Y'all, if you have a #fileserver, always have a parity disk in the #raid volume. ALWAYS. They have saved my ass so many times. And, for the love of all that is righteous, make offline backups of your precious volumes.

    Today is being spent on making my #TrueNAS server healthy again.

    #smartctl #raidz1 #backups #zfs

  4. Horror story in two lines:

    ```
    Device: /dev/ada0, 24 Currently unreadable (pending) sectors.
    Device: /dev/ada0, 24 Offline uncorrectable sectors.
    ```

    Y'all, if you have a #fileserver, always have a parity disk in the #raid volume. ALWAYS. They have saved my ass so many times. And, for the love of all that is righteous, make offline backups of your precious volumes.

    Today is being spent on making my #TrueNAS server healthy again.

    #smartctl #raidz1 #backups #zfs

  5. Horror story in two lines:

    ```
    Device: /dev/ada0, 24 Currently unreadable (pending) sectors.
    Device: /dev/ada0, 24 Offline uncorrectable sectors.
    ```

    Y'all, if you have a #fileserver, always have a parity disk in the #raid volume. ALWAYS. They have saved my ass so many times. And, for the love of all that is righteous, make offline backups of your precious volumes.

    Today is being spent on making my #TrueNAS server healthy again.

    #smartctl #raidz1 #backups #zfs

  6. Horror story in two lines:

    ```
    Device: /dev/ada0, 24 Currently unreadable (pending) sectors.
    Device: /dev/ada0, 24 Offline uncorrectable sectors.
    ```

    Y'all, if you have a #fileserver, always have a parity disk in the #raid volume. ALWAYS. They have saved my ass so many times. And, for the love of all that is righteous, make offline backups of your precious volumes.

    Today is being spent on making my #TrueNAS server healthy again.

    #smartctl #raidz1 #backups #zfs

  7. Аналоги Victoria HDD/SSD на GNU Linux

    Всё что Вы знали и умели на Windows - забудьте. В GNU Linux Вы открываете для себя компьютер заново. Привычные возможности здесь есть, но выглядят они иначе. И вот как выглядит в GNU Linux то, к чему мы привыкли на Windows в приложении Victoria.

    habr.com/ru/articles/876594/

    #Victoria #hdparm #whdd #smartctl #VictoriaHDD

  8. Аналоги Victoria HDD/SSD на GNU Linux

    Всё что Вы знали и умели на Windows - забудьте. В GNU Linux Вы открываете для себя компьютер заново. Привычные возможности здесь есть, но выглядят они иначе. И вот как выглядит в GNU Linux то, к чему мы привыкли на Windows в приложении Victoria.

    habr.com/ru/articles/876594/

    #Victoria #hdparm #whdd #smartctl #VictoriaHDD

  9. Аналоги Victoria HDD/SSD на GNU Linux

    Всё что Вы знали и умели на Windows - забудьте. В GNU Linux Вы открываете для себя компьютер заново. Привычные возможности здесь есть, но выглядят они иначе. И вот как выглядит в GNU Linux то, к чему мы привыкли на Windows в приложении Victoria.

    habr.com/ru/articles/876594/

    #Victoria #hdparm #whdd #smartctl #VictoriaHDD

  10. Аналоги Victoria HDD/SSD на GNU Linux

    Всё что Вы знали и умели на Windows - забудьте. В GNU Linux Вы открываете для себя компьютер заново. Привычные возможности здесь есть, но выглядят они иначе. И вот как выглядит в GNU Linux то, к чему мы привыкли на Windows в приложении Victoria.

    habr.com/ru/articles/876594/

    #Victoria #hdparm #whdd #smartctl #VictoriaHDD

  11. Hello fellow #sysadmins

    Is there a way to tell #smartctl to retrieve/display only a chosen Vendor Specific SMART Attributes?

    I would like to skip the grep part:

    `# smartctl -A /dev/da1 | grep "^231"`
    `231 SSD_Life_Left 0x0000 099 099 000 Old_age Offline - 99`

  12. Hello fellow #sysadmins

    Is there a way to tell #smartctl to retrieve/display only a chosen Vendor Specific SMART Attributes?

    I would like to skip the grep part:

    `# smartctl -A /dev/da1 | grep "^231"`
    `231 SSD_Life_Left 0x0000 099 099 000 Old_age Offline - 99`

  13. Hello fellow #sysadmins

    Is there a way to tell #smartctl to retrieve/display only a chosen Vendor Specific SMART Attributes?

    I would like to skip the grep part:

    `# smartctl -A /dev/da1 | grep "^231"`
    `231 SSD_Life_Left 0x0000 099 099 000 Old_age Offline - 99`

  14. I might be tempting fate for sharing this but damn, these older WD Red drives are amazing. That is about 8.6 years when converted.

    #fileserver #homeserver #homelab #smartctl #zfs

  15. I might be tempting fate for sharing this but damn, these older WD Red drives are amazing. That is about 8.6 years when converted.

    #fileserver #homeserver #homelab #smartctl #zfs

  16. I might be tempting fate for sharing this but damn, these older WD Red drives are amazing. That is about 8.6 years when converted.

    #fileserver #homeserver #homelab #smartctl #zfs

  17. I might be tempting fate for sharing this but damn, these older WD Red drives are amazing. That is about 8.6 years when converted.

    #fileserver #homeserver #homelab #smartctl #zfs

  18. I might be tempting fate for sharing this but damn, these older WD Red drives are amazing. That is about 8.6 years when converted.

    #fileserver #homeserver #homelab #smartctl #zfs

  19. Как мы мониторинг SMART-данных дисков в оVirt экосистеме прикручивали

    Представьте, что на одной из множества ваших виртуальных машин, работающих на oVirt, начнет давать сбой диск в одном из узлов? Мы в Hostkey используем связку smartctl_exporter совместно с Prometheus и Grafana чтобы отследить этот момент и успеть принять меры и хотим поделиться с вами нашим опытом.

    habr.com/ru/companies/hostkey/

    #prometeus #grafana #алертинг #smartctl #hdd #sdd #nvme #хостинг #ovirt #hostkey

  20. Как мы мониторинг SMART-данных дисков в оVirt экосистеме прикручивали

    Представьте, что на одной из множества ваших виртуальных машин, работающих на oVirt, начнет давать сбой диск в одном из узлов? Мы в Hostkey используем связку smartctl_exporter совместно с Prometheus и Grafana чтобы отследить этот момент и успеть принять меры и хотим поделиться с вами нашим опытом.

    habr.com/ru/companies/hostkey/

    #prometeus #grafana #алертинг #smartctl #hdd #sdd #nvme #хостинг #ovirt #hostkey

  21. Как мы мониторинг SMART-данных дисков в оVirt экосистеме прикручивали

    Представьте, что на одной из множества ваших виртуальных машин, работающих на oVirt, начнет давать сбой диск в одном из узлов? Мы в Hostkey используем связку smartctl_exporter совместно с Prometheus и Grafana чтобы отследить этот момент и успеть принять меры и хотим поделиться с вами нашим опытом.

    habr.com/ru/companies/hostkey/

    #prometeus #grafana #алертинг #smartctl #hdd #sdd #nvme #хостинг #ovirt #hostkey

  22. Как мы мониторинг SMART-данных дисков в оVirt экосистеме прикручивали

    Представьте, что на одной из множества ваших виртуальных машин, работающих на oVirt, начнет давать сбой диск в одном из узлов? Мы в Hostkey используем связку smartctl_exporter совместно с Prometheus и Grafana чтобы отследить этот момент и успеть принять меры и хотим поделиться с вами нашим опытом.

    habr.com/ru/companies/hostkey/

    #prometeus #grafana #алертинг #smartctl #hdd #sdd #nvme #хостинг #ovirt #hostkey

  23. Unexpected Christmas present: today I discovered `update-smart-drivedb`

    #smartctl #smartmontools #FOSS

  24. Unexpected Christmas present: today I discovered `update-smart-drivedb`

    #smartctl #smartmontools #FOSS

  25. Unexpected Christmas present: today I discovered `update-smart-drivedb`

    #smartctl #smartmontools #FOSS

  26. Unexpected Christmas present: today I discovered `update-smart-drivedb`

    #smartctl #smartmontools #FOSS

  27. Unexpected Christmas present: today I discovered `update-smart-drivedb`

    #smartctl #smartmontools #FOSS

  28. 處理 smartctl 回報 Seagate 硬碟的數字資訊

    手上有顆 Seagate 的硬碟,在 smartctl 回報的數字很奇怪,可以看到很高的錯誤值:

    1 Raw_Read_Error_Rate 0x000f 082 053 006 Pre-fail Always - 147309240
    7 Seek_Error_Rat

    blog.gslin.org/archives/2024/1

    #Computer #Hardware #Murmuring #Software #bitwise #data #disk #number #seagate #smart #smartctl

  29. 處理 smartctl 回報 Seagate 硬碟的數字資訊

    手上有顆 Seagate 的硬碟,在 smartctl 回報的數字很奇怪,可以看到很高的錯誤值:

    1 Raw_Read_Error_Rate 0x000f 082 053 006 Pre-fail Always - 147309240
    7 Seek_Error_Rat

    blog.gslin.org/archives/2024/1

    #Computer #Hardware #Murmuring #Software #bitwise #data #disk #number #seagate #smart #smartctl

  30. 處理 smartctl 回報 Seagate 硬碟的數字資訊

    手上有顆 Seagate 的硬碟,在 smartctl 回報的數字很奇怪,可以看到很高的錯誤值:

    1 Raw_Read_Error_Rate 0x000f 082 053 006 Pre-fail Always - 147309240
    7 Seek_Error_Rat

    blog.gslin.org/archives/2024/1

    #Computer #Hardware #Murmuring #Software #bitwise #data #disk #number #seagate #smart #smartctl

  31. 處理 smartctl 回報 Seagate 硬碟的數字資訊

    手上有顆 Seagate 的硬碟,在 smartctl 回報的數字很奇怪,可以看到很高的錯誤值:

    1 Raw_Read_Error_Rate 0x000f 082 053 006 Pre-fail Always - 147309240
    7 Seek_Error_Rat

    blog.gslin.org/archives/2024/1

    #Computer #Hardware #Murmuring #Software #bitwise #data #disk #number #seagate #smart #smartctl

  32. 處理 smartctl 回報 Seagate 硬碟的數字資訊

    手上有顆 Seagate 的硬碟,在 smartctl 回報的數字很奇怪,可以看到很高的錯誤值:

    1 Raw_Read_Error_Rate 0x000f 082 053 006 Pre-fail Always - 147309240
    7 Seek_Error_Rat

    blog.gslin.org/archives/2024/1

    #Computer #Hardware #Murmuring #Software #bitwise #data #disk #number #seagate #smart #smartctl

  33. Para permitir que Conky ejecute smartctl con sudo sin requerir una contraseña, agregue una regla a sudoers.

    Esto permitirá que smartctl se ejecute con sudo sin requerir una contraseña cuando Conky lo invoque.

    Con estos cambios, Conky mostrará directamente la temperatura de los discos y resaltará si alguno de ellos alcanza un nivel crítico.

    Edite el archivo sudoers con visudo como se explica aquí:

    #Conky #antiX #sudo #smartctl

    github.com/DrCalambre/OpenWeat

  34. Para permitir que Conky ejecute smartctl con sudo sin requerir una contraseña, agregue una regla a sudoers.

    Esto permitirá que smartctl se ejecute con sudo sin requerir una contraseña cuando Conky lo invoque.

    Con estos cambios, Conky mostrará directamente la temperatura de los discos y resaltará si alguno de ellos alcanza un nivel crítico.

    Edite el archivo sudoers con visudo como se explica aquí:

    #Conky #antiX #sudo #smartctl

    github.com/DrCalambre/OpenWeat

  35. Para permitir que Conky ejecute smartctl con sudo sin requerir una contraseña, agregue una regla a sudoers.

    Esto permitirá que smartctl se ejecute con sudo sin requerir una contraseña cuando Conky lo invoque.

    Con estos cambios, Conky mostrará directamente la temperatura de los discos y resaltará si alguno de ellos alcanza un nivel crítico.

    Edite el archivo sudoers con visudo como se explica aquí:

    #Conky #antiX #sudo #smartctl

    github.com/DrCalambre/OpenWeat

  36. I hear a few "clicking" sounds from the laptop, and figure the #seagate #firecuda #hdd might have trouble. I run a 'short' #smartctl test, which returns no errors.
    Still suspicious, I launch a 'long' test.
    Instantaneously, the drive drops offline and stops answering `smartctl` queries. It's still shown by `lsblk`, but `dmesg`complains that the drive is inaccessible. Online info suggests the drive may be bricked.

    Stupid due to hunger, I disassemble the hdd to see what's wrong.

    ...cnt'd

  37. I hear a few "clicking" sounds from the laptop, and figure the might have trouble. I run a 'short' test, which returns no errors.
    Still suspicious, I launch a 'long' test.
    Instantaneously, the drive drops offline and stops answering `smartctl` queries. It's still shown by `lsblk`, but `dmesg`complains that the drive is inaccessible. Online info suggests the drive may be bricked.

    Stupid due to hunger, I disassemble the hdd to see what's wrong.

    ...cnt'd

  38. Working on a computer (debloated #Lenovo #IdeaPad with 8 GB of RAM) and I decided to do a S.M.A.R.T. test on the drive since I haven't yet and it's 7 years old, and #Plasma6 with #EndeavourOS runs amazingly on it from a USB drive (using #smartctl for this due to not having installed any disk checking utilities) compared to #Windows10 on the slow #Toshiba #laptop drive. It makes #X11 look super smooth and responsive. #Wayland would probably look like a hot knife through butter.

    #Linux

  39. Working on a computer (debloated #Lenovo #IdeaPad with 8 GB of RAM) and I decided to do a S.M.A.R.T. test on the drive since I haven't yet and it's 7 years old, and #Plasma6 with #EndeavourOS runs amazingly on it from a USB drive (using #smartctl for this due to not having installed any disk checking utilities) compared to #Windows10 on the slow #Toshiba #laptop drive. It makes #X11 look super smooth and responsive. #Wayland would probably look like a hot knife through butter.

    #Linux