#sanding — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #sanding, aggregated by home.social.
-
2/3
Had planned to fit it in a real fish can,
but decided would be better, and simpler, to print the can too and make it bigger.
After some refinement in blender, I printed it on My A1 mini.
(had a few problems on the guitar supports)I fit tested the parts
Then sanded, repared, replaced parts, broked parts, moaning, re-repaired, re-sanded...
it is made of 5 part :
-Fish can base
-can lid
-6 monsters
-crab clamp with keyboard
-crab leg -
2/3
Had planned to fit it in a real fish can,
but decided would be better, and simpler, to print the can too and make it bigger.
After some refinement in blender, I printed it on My A1 mini.
(had a few problems on the guitar supports)I fit tested the parts
Then sanded, repared, replaced parts, broked parts, moaning, re-repaired, re-sanded...
it is made of 5 part :
-Fish can base
-can lid
-6 monsters
-crab clamp with keyboard
-crab leg -
2/3
Had planned to fit it in a real fish can,
but decided would be better, and simpler, to print the can too and make it bigger.
After some refinement in blender, I printed it on My A1 mini.
(had a few problems on the guitar supports)I fit tested the parts
Then sanded, repared, replaced parts, broked parts, moaning, re-repaired, re-sanded...
it is made of 5 part :
-Fish can base
-can lid
-6 monsters
-crab clamp with keyboard
-crab leg -
2/3
Had planned to fit it in a real fish can,
but decided would be better, and simpler, to print the can too and make it bigger.
After some refinement in blender, I printed it on My A1 mini.
(had a few problems on the guitar supports)I fit tested the parts
Then sanded, repared, replaced parts, broked parts, moaning, re-repaired, re-sanded...
it is made of 5 part :
-Fish can base
-can lid
-6 monsters
-crab clamp with keyboard
-crab leg -
I finally wet sanded a bunch of #3DPrints that I had sitting around. Most of them were bases or toppers which I'm quite excited to get some paint on!
I also primed a bunch of printed models since the humidity wasn't 800% today! Now I've got 3298473785 things to paint! 🎨
#resin #3DPrinting #sanding #3DPrinter #painting #miniatures #GrimDark
-
I finally wet sanded a bunch of #3DPrints that I had sitting around. Most of them were bases or toppers which I'm quite excited to get some paint on!
I also primed a bunch of printed models since the humidity wasn't 800% today! Now I've got 3298473785 things to paint! 🎨
#resin #3DPrinting #sanding #3DPrinter #painting #miniatures #GrimDark
-
I finally wet sanded a bunch of #3DPrints that I had sitting around. Most of them were bases or toppers which I'm quite excited to get some paint on!
I also primed a bunch of printed models since the humidity wasn't 800% today! Now I've got 3298473785 things to paint! 🎨
#resin #3DPrinting #sanding #3DPrinter #painting #miniatures #GrimDark
-
I finally wet sanded a bunch of #3DPrints that I had sitting around. Most of them were bases or toppers which I'm quite excited to get some paint on!
I also primed a bunch of printed models since the humidity wasn't 800% today! Now I've got 3298473785 things to paint! 🎨
#resin #3DPrinting #sanding #3DPrinter #painting #miniatures #GrimDark
-
I made a thing (this video took me way too long lmao)
If you want one of these figures, one piece is now on sale on our Ko-fi page! ☕Thank you so much for supporting us, we'll now embark on a new project... 👀
#3dprinting #3dprinted #3dfigure #3dpainting #figures #fanart #sanding #brush #acrylics #weiwuxian #wwx #mdzs #mdzsfanart #modaozushi #behindthescene
-
I am almost finished with wet sanding the last side of the last glider wing.
The orbital sander has done all it can do on the mostly flat top and bottom of the wing, but the leading edge is strongly curved.
I'll sand that narrow strip by hand...tomorrow when I'm not tired.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Wing
-
I am almost finished with wet sanding the last side of the last glider wing.
The orbital sander has done all it can do on the mostly flat top and bottom of the wing, but the leading edge is strongly curved.
I'll sand that narrow strip by hand...tomorrow when I'm not tired.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Wing
-
I am almost finished with wet sanding the last side of the last glider wing.
The orbital sander has done all it can do on the mostly flat top and bottom of the wing, but the leading edge is strongly curved.
I'll sand that narrow strip by hand...tomorrow when I'm not tired.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Wing
-
I am almost finished with wet sanding the last side of the last glider wing.
The orbital sander has done all it can do on the mostly flat top and bottom of the wing, but the leading edge is strongly curved.
I'll sand that narrow strip by hand...tomorrow when I'm not tired.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Wing
-
I am almost finished with wet sanding the last side of the last glider wing.
The orbital sander has done all it can do on the mostly flat top and bottom of the wing, but the leading edge is strongly curved.
I'll sand that narrow strip by hand...tomorrow when I'm not tired.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Wing
-
I must be making good progress wet sanding the glider's wing.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Mess
-
I must be making good progress wet sanding the glider's wing.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Mess
-
I must be making good progress wet sanding the glider's wing.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Mess
-
I must be making good progress wet sanding the glider's wing.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Mess
-
I must be making good progress wet sanding the glider's wing.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing #Mess
-
The final (2nd) glider wing is getting sanded to remove orange peel from the polyurethane topcoat.
After sanding is complete, I'll buff it with rubbing compound to give it a semi-mirror finish.
Tomorrow I hope to finish sanding this top side. (The bottom remains unsanded.)
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing
-
The final (2nd) glider wing is getting sanded to remove orange peel from the polyurethane topcoat.
After sanding is complete, I'll buff it with rubbing compound to give it a semi-mirror finish.
Tomorrow I hope to finish sanding this top side. (The bottom remains unsanded.)
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing
-
The final (2nd) glider wing is getting sanded to remove orange peel from the polyurethane topcoat.
After sanding is complete, I'll buff it with rubbing compound to give it a semi-mirror finish.
Tomorrow I hope to finish sanding this top side. (The bottom remains unsanded.)
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing
-
The final (2nd) glider wing is getting sanded to remove orange peel from the polyurethane topcoat.
After sanding is complete, I'll buff it with rubbing compound to give it a semi-mirror finish.
Tomorrow I hope to finish sanding this top side. (The bottom remains unsanded.)
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing
-
The final (2nd) glider wing is getting sanded to remove orange peel from the polyurethane topcoat.
After sanding is complete, I'll buff it with rubbing compound to give it a semi-mirror finish.
Tomorrow I hope to finish sanding this top side. (The bottom remains unsanded.)
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Paint #Sanding #Polishing
-
Watch Bondo Putty Get Sprayed Onto 3D Prints - 3D prints destined for presentation need smooth surfaces, and that usually means s... - https://hackaday.com/2025/08/31/watch-bondo-putty-get-sprayed-onto-3d-prints/ #3dprinterhacks #toolhacks #3dprinted #smoothing #airbrush #acetone #sanding #bondo
-
Watch Bondo Putty Get Sprayed Onto 3D Prints - 3D prints destined for presentation need smooth surfaces, and that usually means s... - https://hackaday.com/2025/08/31/watch-bondo-putty-get-sprayed-onto-3d-prints/ #3dprinterhacks #toolhacks #3dprinted #smoothing #airbrush #acetone #sanding #bondo
-
Watch Bondo Putty Get Sprayed Onto 3D Prints - 3D prints destined for presentation need smooth surfaces, and that usually means s... - https://hackaday.com/2025/08/31/watch-bondo-putty-get-sprayed-onto-3d-prints/ #3dprinterhacks #toolhacks #3dprinted #smoothing #airbrush #acetone #sanding #bondo
-
Watch Bondo Putty Get Sprayed Onto 3D Prints - 3D prints destined for presentation need smooth surfaces, and that usually means s... - https://hackaday.com/2025/08/31/watch-bondo-putty-get-sprayed-onto-3d-prints/ #3dprinterhacks #toolhacks #3dprinted #smoothing #airbrush #acetone #sanding #bondo
-
Watch Bondo Putty Get Sprayed Onto 3D Prints - 3D prints destined for presentation need smooth surfaces, and that usually means s... - https://hackaday.com/2025/08/31/watch-bondo-putty-get-sprayed-onto-3d-prints/ #3dprinterhacks #toolhacks #3dprinted #smoothing #airbrush #acetone #sanding #bondo
-
Watch Bondo Putty Get Sprayed Onto 3D Prints https://hackaday.com/2025/08/31/watch-bondo-putty-get-sprayed-onto-3d-prints/ #3dPrinterhacks #ToolHacks #3dprinted #smoothing #airbrush #acetone #sanding #bondo
-
Watch Bondo Putty Get Sprayed Onto 3D Prints https://hackaday.com/2025/08/31/watch-bondo-putty-get-sprayed-onto-3d-prints/ #3dPrinterhacks #ToolHacks #3dprinted #smoothing #airbrush #acetone #sanding #bondo
-
Watch Bondo Putty Get Sprayed Onto 3D Prints https://hackaday.com/2025/08/31/watch-bondo-putty-get-sprayed-onto-3d-prints/ #3dPrinterhacks #ToolHacks #3dprinted #smoothing #airbrush #acetone #sanding #bondo
-
Watch Bondo Putty Get Sprayed Onto 3D Prints https://hackaday.com/2025/08/31/watch-bondo-putty-get-sprayed-onto-3d-prints/ #3dPrinterhacks #ToolHacks #3dprinted #smoothing #airbrush #acetone #sanding #bondo
-
The underside of the glider's right wing is ready for sanding to remove orange peel from the final coat of paint.
(Now I know how long of a line a Sharpie can draw before it runs out of ink)
The three oval areas are inspection/access ports to the inner moving parts of the flight control system...flaperons, and spoilers.
The grid of black lines will help me monitor the progress of sanding.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Wing #Sanding #Paint #Painting #Sharpie
-
The underside of the glider's right wing is ready for sanding to remove orange peel from the final coat of paint.
(Now I know how long of a line a Sharpie can draw before it runs out of ink)
The three oval areas are inspection/access ports to the inner moving parts of the flight control system...flaperons, and spoilers.
The grid of black lines will help me monitor the progress of sanding.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Wing #Sanding #Paint #Painting #Sharpie
-
The underside of the glider's right wing is ready for sanding to remove orange peel from the final coat of paint.
(Now I know how long of a line a Sharpie can draw before it runs out of ink)
The three oval areas are inspection/access ports to the inner moving parts of the flight control system...flaperons, and spoilers.
The grid of black lines will help me monitor the progress of sanding.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Wing #Sanding #Paint #Painting #Sharpie
-
The underside of the glider's right wing is ready for sanding to remove orange peel from the final coat of paint.
(Now I know how long of a line a Sharpie can draw before it runs out of ink)
The three oval areas are inspection/access ports to the inner moving parts of the flight control system...flaperons, and spoilers.
The grid of black lines will help me monitor the progress of sanding.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Wing #Sanding #Paint #Painting #Sharpie
-
The underside of the glider's right wing is ready for sanding to remove orange peel from the final coat of paint.
(Now I know how long of a line a Sharpie can draw before it runs out of ink)
The three oval areas are inspection/access ports to the inner moving parts of the flight control system...flaperons, and spoilers.
The grid of black lines will help me monitor the progress of sanding.
#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Wing #Sanding #Paint #Painting #Sharpie
-
RT from PrintHue (@PrintHue85)
Colosus is finished, thank you all for huge support. Hope you like the result as i do.
Filament: PETg filament
Printers: MK4
#pokemon #kids #3dprinting #3dprint #3dprinter #3dprinted #prusa #prusa3d #prusamk4 #mk4 #bulbasaur #puzzle #huge #sanding #gapsOriginal tweet: https://twitter.com/PrintHue85/status/1849466951292097023
-
RT from PrintHue (@PrintHue85)
Colosus is finished, thank you all for huge support. Hope you like the result as i do.
Filament: PETg filament
Printers: MK4
#pokemon #kids #3dprinting #3dprint #3dprinter #3dprinted #prusa #prusa3d #prusamk4 #mk4 #bulbasaur #puzzle #huge #sanding #gapsOriginal tweet: https://twitter.com/PrintHue85/status/1849466951292097023
-
RT from PrintHue (@PrintHue85)
Colosus is finished, thank you all for huge support. Hope you like the result as i do.
Filament: PETg filament
Printers: MK4
#pokemon #kids #3dprinting #3dprint #3dprinter #3dprinted #prusa #prusa3d #prusamk4 #mk4 #bulbasaur #puzzle #huge #sanding #gapsOriginal tweet: https://twitter.com/PrintHue85/status/1849466951292097023
-
RT from PrintHue (@PrintHue85)
Colosus is finished, thank you all for huge support. Hope you like the result as i do.
Filament: PETg filament
Printers: MK4
#pokemon #kids #3dprinting #3dprint #3dprinter #3dprinted #prusa #prusa3d #prusamk4 #mk4 #bulbasaur #puzzle #huge #sanding #gapsOriginal tweet: https://twitter.com/PrintHue85/status/1849466951292097023
-
RT from PrintHue (@PrintHue85)
Colosus is finished, thank you all for huge support. Hope you like the result as i do.
Filament: PETg filament
Printers: MK4
#pokemon #kids #3dprinting #3dprint #3dprinter #3dprinted #prusa #prusa3d #prusamk4 #mk4 #bulbasaur #puzzle #huge #sanding #gapsOriginal tweet: https://twitter.com/PrintHue85/status/1849466951292097023
-
🤖 'hi' 👋🏻🙌🏻
for finished work aivailable in ThuhShop :thinkerguns:
https://thuhstudio.etsy.com#unmolding #unboxing #concrete #walle #robot #sculpture #shipbuilding #workinprogress #sanding #polishing #stonework #hello #surprise #ashes #rise #architecture #birth #art #abstract #craft #handmade
-
🤖 'hi' 👋🏻🙌🏻
for finished work aivailable in ThuhShop :thinkerguns:
https://thuhstudio.etsy.com#unmolding #unboxing #concrete #walle #robot #sculpture #shipbuilding #workinprogress #sanding #polishing #stonework #hello #surprise #ashes #rise #architecture #birth #art #abstract #craft #handmade