#rnode — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #rnode, aggregated by home.social.
-
SUCCESS! well partially but still. Received a #reticulum message sent via #lora #rnode via my two XIAO ESP32! But only in one direction ... the other does not work, only sees announces but does not get ant messages or recipes.
-
Next adventure into #reticulum : flash #RNode on the XIAO ESP32.
Did work great after the second attempt! also enabling Bluetooth worked first try, entering pairingmode / pairing also worked second try. But now I am stuck because I can't connect after pairing successfully :/
-
#reticulum #lora From https://maps.app.goo.gl/K2uFvsebN628cc2T6
52.0565420, -1.8001290
///envisage.finishing.conductor
52°03'23.6"N 1°48'00.5"W
Dover's Hill in Weston Subedge in the #Costwolds
I have a direct line of sight to directions to:
#Birmingham
#Warwick
#Coventry
#Evesham
#Worcester
So wanted to know if anyone in that zone was on #reticulum by #lora #rnode and what frequency settings (freq, bandwidth, spreading factor, coding rate) they are using. I am using for now:
https://loramesh.org#settings -
#reticulum #lora From https://maps.app.goo.gl/K2uFvsebN628cc2T6
52.0565420, -1.8001290
///envisage.finishing.conductor
52°03'23.6"N 1°48'00.5"W
Dover's Hill in Weston Subedge in the #Costwolds
I have a direct line of sight to directions to:
#Birmingham
#Warwick
#Coventry
#Evesham
#Worcester
So wanted to know if anyone in that zone was on #reticulum by #lora #rnode and what frequency settings (freq, bandwidth, spreading factor, coding rate) they are using. I am using for now:
https://loramesh.org#settings -
Installing #RNode #reticulum on my XIAO nRF52840 ( + #LoRa board) is really troublesome. got the firmware (RNode CE from Dev branch, one commit back) compiled but not uploaded :/ also am a newbe on this field.
-
Installing #RNode #reticulum on my XIAO nRF52840 ( + #LoRa board) is really troublesome. got the firmware (RNode CE from Dev branch, one commit back) compiled but not uploaded :/ also am a newbe on this field.
-
@VogueLaGalere I really like this. I think you have solved my 4 yagis under the roof all running with spreading factor (SF) 12 issue...... where collisions were messing things up.... I think the idea of special firmware to exclude certain events / reactions per #lora #rnode might fix it.... will ponder 🤔 #reticulum #multirnode #antennaarray
-
@VogueLaGalere I really like this. I think you have solved my 4 yagis under the roof all running with spreading factor (SF) 12 issue...... where collisions were messing things up.... I think the idea of special firmware to exclude certain events / reactions per #lora #rnode might fix it.... will ponder 🤔 #reticulum #multirnode #antennaarray
-
The #lora #rnode #cardputer #m5cardputer #ratcom code 1.9.2 included a fix https://github.com/ratspeak/ratcom/releases/tag/v1.9.2
and flashing from Chrome using the web flasher resulted in the #cardputer working as an #rnode directly with no problem accessing my existing lora #reticulum mesh. -
The #lora #rnode #cardputer #m5cardputer #ratcom code 1.9.2 included a fix https://github.com/ratspeak/ratcom/releases/tag/v1.9.2
and flashing from Chrome using the web flasher resulted in the #cardputer working as an #rnode directly with no problem accessing my existing lora #reticulum mesh. -
#reticulum lora #rnode #stationG2 set up to connect via bluetooth to linux #nixos laptop machine which uses #meshchat as the messaging gui.
Gruesome details here https://codeberg.org/adingbatponder/reticulum_nixos_flake/src/branch/main/docs/StationG2setup.md
based on fabulous https://codeberg.org/kraven/g2_rnode_firmware
(with Claude Code to the rescue). -
#reticulum lora #rnode #stationG2 set up to connect via bluetooth to linux #nixos laptop machine which uses #meshchat as the messaging gui.
Gruesome details here https://codeberg.org/adingbatponder/reticulum_nixos_flake/src/branch/main/docs/StationG2setup.md
based on fabulous https://codeberg.org/kraven/g2_rnode_firmware
(with Claude Code to the rescue). -
A #ratspeak #ratcom #reticulum #rnode #lora fix of the stand-alone #rnode #M5Cardputer #Cardputer #meshcardputer for #reticulum #lora #mesh
fix: https://github.com/ratspeak/ratcom/issues/14#issuecomment-4499654378
Device: https://shop.m5stack.com/products/cardputer-mesh-kit-for-meshtastic-esp32-s3?variant=48684913164545
Source code (adapted with said fix): https://github.com/ratspeak/ratcom
details on setup using linux / nixOS : https://codeberg.org/adingbatponder/reticulum_nixos_flake/src/branch/main/docs/CardputerSetup.md
EDIT: ratcom 1.9.2 includes this fix 20260522 -
A #ratspeak #ratcom #reticulum #rnode #lora fix of the stand-alone #rnode #M5Cardputer #Cardputer #meshcardputer for #reticulum #lora #mesh
fix: https://github.com/ratspeak/ratcom/issues/14#issuecomment-4499654378
Device: https://shop.m5stack.com/products/cardputer-mesh-kit-for-meshtastic-esp32-s3?variant=48684913164545
Source code (adapted with said fix): https://github.com/ratspeak/ratcom
details on setup using linux / nixOS : https://codeberg.org/adingbatponder/reticulum_nixos_flake/src/branch/main/docs/CardputerSetup.md
EDIT: ratcom 1.9.2 includes this fix 20260522 -
-
-
-
-
Udało mi się nareszcie połączyć #Sideband z Windows do mojego #RNode interfejsem #serial co jest trochę bez sensu, bo miało być z #Android po #Bluetooth ale przynajmniej wiem, że mi wezeł działa.
-
Udało mi się nareszcie połączyć #Sideband z Windows do mojego #RNode interfejsem #serial co jest trochę bez sensu, bo miało być z #Android po #Bluetooth ale przynajmniej wiem, że mi wezeł działa.
-
I'ts me again with a #Reticulum question: Has somebody else issues to connect Heltec V3/V4 with Android? Current Firmware #Rnode and CE Firmware
If I click on the Node in the Pairing Menu nothing happens (node is in pairing mode).
I can use those boards with Meshtastic and Meshcore wothout issues.
Edit: iOS is does not show nodes at all.
I re-flashed multiple times via the webflasher.Edit: Reliable success with Columba 1.0.1 Beta (Abdroid) and curremt Rnode and CE.
-
I'ts me again with a #Reticulum question: Has somebody else issues to connect Heltec V3/V4 with Android? Current Firmware #Rnode and CE Firmware
If I click on the Node in the Pairing Menu nothing happens (node is in pairing mode).
I can use those boards with Meshtastic and Meshcore wothout issues.
Edit: iOS is does not show nodes at all.
I re-flashed multiple times via the webflasher.Edit: Reliable success with Columba 1.0.1 Beta (Abdroid) and curremt Rnode and CE.
-
New #reticulum 1.1.8 has a critical fix
https://github.com/markqvist/Reticulum/releases/tag/1.1.8 #rns #rnode
(21-04-2026) -
New #reticulum 1.1.8 has a critical fix
https://github.com/markqvist/Reticulum/releases/tag/1.1.8 #rns #rnode
(21-04-2026) -
Hey #Reticulum people, is #rnode really inactive at the moment and if so, what can I use on my heltec V3 instead to use the #reticulumnetwork ?
-
Hey #Reticulum people, is #rnode really inactive at the moment and if so, what can I use on my heltec V3 instead to use the #reticulumnetwork ?
-
I'm feeling pretty dissatisfied with the Heltec V4 Expansion Kits I bought. I connected them both to (and configured with) the Sideband app. Set them up so they could also act as Transport Nodes. Power set to 28db. Range is sub-optimal compared to my T-Echoes that are running 22db and get out further (using a Paradar +5db gain antenna on all units). Also not happy that RNS firmware provides no screen whatsoever so everything has to be done through the app. Reading elsewhere online and quite a few people also having this problem. I'm at the point where I may refocus temporarily on moving my efforts to concentrating on RNS over Packet Radio until I have the resources to properly build a localnet of several nodes for LoRa. I would be interested in hearing from people who have had more success with the Heltec V4's... #Reticulum #RNode #LoRa #Meshradio
-
I'm feeling pretty dissatisfied with the Heltec V4 Expansion Kits I bought. I connected them both to (and configured with) the Sideband app. Set them up so they could also act as Transport Nodes. Power set to 28db. Range is sub-optimal compared to my T-Echoes that are running 22db and get out further (using a Paradar +5db gain antenna on all units). Also not happy that RNS firmware provides no screen whatsoever so everything has to be done through the app. Reading elsewhere online and quite a few people also having this problem. I'm at the point where I may refocus temporarily on moving my efforts to concentrating on RNS over Packet Radio until I have the resources to properly build a localnet of several nodes for LoRa. I would be interested in hearing from people who have had more success with the Heltec V4's... #Reticulum #RNode #LoRa #Meshradio
-
So it seens my #reticulum setup works for some time but crashes after a while :loading:
also my lxmf relay is being displayed as "last seen 1d". Sounds like debbuging to me ...
also the #RNode does not seem to turn of its display. long press on prog turns it off but also kills the Bluetooth connection.
-
So it seens my #reticulum setup works for some time but crashes after a while :loading:
also my lxmf relay is being displayed as "last seen 1d". Sounds like debbuging to me ...
also the #RNode does not seem to turn of its display. long press on prog turns it off but also kills the Bluetooth connection.
-
Finally got #reticulum Working! Server as (LXMF) Relay/Gateway via #I2P and #Yggdrasil. Phone with #Columba as Client. Yay!
Also got my HeltecV3 flashed with #RNode and even paired with my phone. The later was the hardest part, lol.
Not quite sure what to do now ... probably get some more #LoRa nodes and have a Server-Phone connection via it, besides WiFi?
-
Finally got #reticulum Working! Server as (LXMF) Relay/Gateway via #I2P and #Yggdrasil. Phone with #Columba as Client. Yay!
Also got my HeltecV3 flashed with #RNode and even paired with my phone. The later was the hardest part, lol.
Not quite sure what to do now ... probably get some more #LoRa nodes and have a Server-Phone connection via it, besides WiFi?
-
#reticulum #lora #radio #mesh #announces #rnode mapping tool dashboard code repo https://github.com/fotografm/rns-map
The map can help understand a local mesh setup and the role of propagation nodes, the audio channels and so on. Pressing "announce" on a node shows up in the map in real time. This is shown also in these videos https://youtube.com/shorts/zt1yB5kgiV4?si=x6AmIr53i7NV59Uz
https://youtube.com/shorts/FcW732Hxz5c?is=GbsKWtU9Ed8Ym74j -
#reticulum #lora #radio #mesh #announces #rnode mapping tool dashboard code repo https://github.com/fotografm/rns-map
The map can help understand a local mesh setup and the role of propagation nodes, the audio channels and so on. Pressing "announce" on a node shows up in the map in real time. This is shown also in these videos https://youtube.com/shorts/zt1yB5kgiV4?si=x6AmIr53i7NV59Uz
https://youtube.com/shorts/FcW732Hxz5c?is=GbsKWtU9Ed8Ym74j -
#reticulum #rnode announce mapping by hops and #nomadnet and #lxmf messages and transport #rnode identifiable via layers https://youtube.com/shorts/MOzXq7b0wHQ?si=imkJe4SLAUtkOzOr
-
#reticulum #rnode announce mapping by hops and #nomadnet and #lxmf messages and transport #rnode identifiable via layers https://youtube.com/shorts/MOzXq7b0wHQ?si=imkJe4SLAUtkOzOr
-
Anyone out there experimenting with Reticulum? Building RNodes?
We put together a FREE GUIDE just for fun. 👉 Building a working Reticulum node from off-the-shelf hardware.
🔗 https://nodestar.net/reticulum-rnode-guide.html
If you've got corrections, better approaches, or hardware combos that worked for you, share them below. 🙏
#Reticulum #RNode #web4 #MeshNetworking #OffGrid #OpenSource #LoRa #Privacy
-
Anyone out there experimenting with Reticulum? Building RNodes?
We put together a FREE GUIDE just for fun. 👉 Building a working Reticulum node from off-the-shelf hardware.
🔗 https://nodestar.net/reticulum-rnode-guide.html
If you've got corrections, better approaches, or hardware combos that worked for you, share them below. 🙏
#Reticulum #RNode #web4 #MeshNetworking #OffGrid #OpenSource #LoRa #Privacy
-
#ClaudeCode on my laptop machine can, after a couple of pop-ups, see below, #ssh into my #pizero and monkey around with it..... not bad. The pi zero #lora #rnode is connected to the laptop via a hotspot that the pi zero generates to serve #reticulum #meshchat. The laptop is connected to that hotspot via a dedicated wifi dongle TP-Link Archer T3U Plus AC1300 for dual wifi https://amzn.eu/d/04oLHUGr (running nixos but works for any device with browser). #raspberrypizero info https://loramesh.org/subpages/piboxnode/build_pi_box.html
-
#ClaudeCode on my laptop machine can, after a couple of pop-ups, see below, #ssh into my #pizero and monkey around with it..... not bad. The pi zero #lora #rnode is connected to the laptop via a hotspot that the pi zero generates to serve #reticulum #meshchat. The laptop is connected to that hotspot via a dedicated wifi dongle TP-Link Archer T3U Plus AC1300 for dual wifi https://amzn.eu/d/04oLHUGr (running nixos but works for any device with browser). #raspberrypizero info https://loramesh.org/subpages/piboxnode/build_pi_box.html
-
I have an Acer laptop in the loft running a #lora #rnode on #reticulum and #meshchat on #nixos since over 200 days and it still works. So Nixos was stable did not fail for over 200 days. For info about Reticulum etc. one can consult https://loramesh.org
-
I have an Acer laptop in the loft running a #lora #rnode on #reticulum and #meshchat on #nixos since over 200 days and it still works. So Nixos was stable did not fail for over 200 days. For info about Reticulum etc. one can consult https://loramesh.org
-
Open sovereign private encrypted long range high bandwidth radio communication mesh networks https://youtu.be/XTnYVh7K6xQ?si=Gygjc391_3l1b9IN #reticulum #halow #haven #havennodes #raspberryPi #seedstudio https://www.seeedstudio.com/Wio-WM6108-Wi-Fi-HaLow-mini-PCIe-Module-p-6394.html with #pihat https://www.seeedstudio.com/WM1302-Pi-Hat-p-4897.html #openmanet #manetipmesh #meshradio #rnode https://github.com/buildwithparallel/haven-manet-ip-mesh-radio/ #ATAK (alas the parts are not for use in the EU etc.)
-
Open sovereign private encrypted long range high bandwidth radio communication mesh networks https://youtu.be/XTnYVh7K6xQ?si=Gygjc391_3l1b9IN #reticulum #halow #haven #havennodes #raspberryPi #seedstudio https://www.seeedstudio.com/Wio-WM6108-Wi-Fi-HaLow-mini-PCIe-Module-p-6394.html with #pihat https://www.seeedstudio.com/WM1302-Pi-Hat-p-4897.html #openmanet #manetipmesh #meshradio #rnode https://github.com/buildwithparallel/haven-manet-ip-mesh-radio/ #ATAK (alas the parts are not for use in the EU etc.)
-
When I was out at the shopping mall the other day I notice my RNode going nuts. Some weird interference. What could be causing this? #Reticulum #RNode #DataMesh #LoRa
