#raspbian — Public Fediverse posts

Dites masto, pour un vieux coucou en 32 bit. Intel Atom, ssd en mSata, ddr2 (oui bon...) Vous conseillé quoi comme distro légère ?

Pas pour aller sur le net, mais plus comme un terminal, prise de note, lecture pdf/ebook ?

Comme les dernières distro font l'impasse sur le 32 bit, je sais pas trop. Une ancienne distro #mxlinux ? Une #antixlinux ? Une #alpinelinux ? (Me proposez pas #raspbian). Je reste attaché à debian, apt et apt-get...

#linux
#lowtech
#debian
#recycle
#lowtech
#basstechno

Массовая прошивка компьютеров AntexGate на базе Raspberry CM4 CM5

Добрый день, коллеги. Наверняка многие сталкивались с ситуацией: нужно прошить 20, 50, а то и 100 EDGE компьютеров перед отправкой заказчику. Берёшь USB-кабель, открываешь Win32imager .. На пятой плате рутина убивает в тебе инженера. На десятой — кажется, что ты работаешь на азиатском подполье по производству типовых приборов. Мы через это прошли. И теперь хотим рассказать, как превратили муторную рутину в комфортный процесс.

https://habr.com/ru/articles/1024312/

#cmprovision #antexgate #raspberry_pi #raspbian #raspberry_pi_4 #edge #умный_дом #умный_город #интернет_вещей #iot

Bon, j’ai un MicroJournal Rev 2:

https://github.com/unkyulee/micro-journal/blob/main/micro-journal-rev-2-revamp/readme.md

J’ai mis à jour Raspian, j’ai passé le clavier en #ergol et là, catastrophe ! Comme le clavier est hyper custom, je suis complètement perdu.

Une idée de comment il faut avancer chez les #ergonautes ?

C’est un truc qui pourrait intéresser @NuclearSquid ;-)

#microjournal #ergonomicKeyboards #raspbian

Bon, j’ai un MicroJournal Rev 2:

https://github.com/unkyulee/micro-journal/blob/main/micro-journal-rev-2-revamp/readme.md

J’ai mis à jour Raspian, j’ai passé le clavier en #ergol et là, catastrophe ! Comme le clavier est hyper custom, je suis complètement perdu.

Une idée de comment il faut avancer chez les #ergonautes ?

C’est un truc qui pourrait intéresser @NuclearSquid ;-)

#microjournal #ergonomicKeyboards #raspbian

Bon, j’ai un MicroJournal Rev 2:

https://github.com/unkyulee/micro-journal/blob/main/micro-journal-rev-2-revamp/readme.md

J’ai mis à jour Raspian, j’ai passé le clavier en #ergol et là, catastrophe ! Comme le clavier est hyper custom, je suis complètement perdu.

Une idée de comment il faut avancer chez les #ergonautes ?

C’est un truc qui pourrait intéresser @NuclearSquid ;-)

#microjournal #ergonomicKeyboards #raspbian

Bon, j’ai un MicroJournal Rev 2:

https://github.com/unkyulee/micro-journal/blob/main/micro-journal-rev-2-revamp/readme.md

J’ai mis à jour Raspian, j’ai passé le clavier en #ergol et là, catastrophe ! Comme le clavier est hyper custom, je suis complètement perdu.

Une idée de comment il faut avancer chez les #ergonautes ?

C’est un truc qui pourrait intéresser @NuclearSquid ;-)

#microjournal #ergonomicKeyboards #raspbian

Bon, j’ai un MicroJournal Rev 2:

https://github.com/unkyulee/micro-journal/blob/main/micro-journal-rev-2-revamp/readme.md

J’ai mis à jour Raspian, j’ai passé le clavier en #ergol et là, catastrophe ! Comme le clavier est hyper custom, je suis complètement perdu.

Une idée de comment il faut avancer chez les #ergonautes ?

C’est un truc qui pourrait intéresser @NuclearSquid ;-)

#microjournal #ergonomicKeyboards #raspbian

Suunnittelin tulevaa… 16. päivä kuluvaa kuuta tuli #RasPi2B:lläni kymmenen vuotta täyteen #nimipalvelin-hommissa. Käyttiksenä on ollut #Raspbian (2016–2021), #Ubuntu (2021–2023) ja #FreeBSD (2023–). 32-bittisen #armv7:n tuki vain uhkaa kadota kaikkialta ennen pitkää. Tuumin, tulisiko #RasPi4B:stä uusi nimipalvelin ja vanhempi 2B siirtyisi eläkkeelle? #atkjuttuja #linux #bsd #floss #atkjuttuja

Now, #fedora is still my daily OS on my workstation (PC and laptop). On my servers, #centos had been my primary server distro, but changed to #rockylinux and #almalinux because #redhat policy changes.

There are some of my servers also use fedora #coreos aka #fcos and i love it.

Also touch #ubuntu or #debian, but only because some of my company's customer use that on their servers.

Also touch debian because it is base distro of #proxmox VE and #raspberry #pi #raspbian.

#deardiary

I kid you not, just did a moto24 - #raspbian #rpi4 sftp transfer via #termux because #bluetooth could not connect.

Twa's literally faster to type in than wrestle demons of #ui.

There was someone lately as had said that he doesn't like the #cli and good riddance? My dude! Looks like you could never run your fingers over it proper.

Lazy day today. Did an exercise I was putting off. Turns out it was quite simple in the end.

'kay off to bed.. night night..

Spent all day trying to get #libcamera to produce a good quality video stream using #MediaMTX under IR light. In the end I've gone back to RPi Cam Control using #picamera
The quality was awful, and no matter how much I fiddled with the mediamtx.yml it didn't improve.
Back to #Raspbian #Buster #raspberrypi

Spent all day trying to get #libcamera to produce a good quality video stream using #MediaMTX under IR light. In the end I've gone back to RPi Cam Control using #picamera
The quality was awful, and no matter how much I fiddled with the mediamtx.yml it didn't improve.
Back to #Raspbian #Buster #raspberrypi

Spent all day trying to get #libcamera to produce a good quality video stream using #MediaMTX under IR light. In the end I've gone back to RPi Cam Control using #picamera
The quality was awful, and no matter how much I fiddled with the mediamtx.yml it didn't improve.
Back to #Raspbian #Buster #raspberrypi

Spent all day trying to get #libcamera to produce a good quality video stream using #MediaMTX under IR light. In the end I've gone back to RPi Cam Control using #picamera
The quality was awful, and no matter how much I fiddled with the mediamtx.yml it didn't improve.
Back to #Raspbian #Buster #raspberrypi

Spent all day trying to get #libcamera to produce a good quality video stream using #MediaMTX under IR light. In the end I've gone back to RPi Cam Control using #picamera
The quality was awful, and no matter how much I fiddled with the mediamtx.yml it didn't improve.
Back to #Raspbian #Buster #raspberrypi

@axantoni
I used #Ubuntu with the #Unity desktop for a while, but then switched to #LinuxMint because of its ease of use.
I now use #LinuxMintDebianEdition (#LMDE) because of its better compatibility with RaspberryPi and #Raspbian (#RaspberryPiOS).

@waldstepper

#Wireguard ist nach dem #Raspbian #Trixie Update auch wieder repariert….
BTW: kann man #PiVPN einfach drüber installieren oder wäre das ne neuinstallation? PiVPN scheint nette Analysetools zur Fehlerbehebung zu haben - aber ich keine Zeit für ne PiHole/VPN Neuinstallation. (Aber eigentlich auch keine für ausufernde Fehlersuche 😬)

I've managed to get #OpenMediaVault working on my #RaspberryPi (running #Raspbian Lite) and the performance seems pretty impressive! Despite relying on USB storage for the SSDs.

This is my first time running a #NAS on the Pi, on #OMV, not using #ZFS or #RAID but rather an #Unraid like solution, 'cept, #FOSS called #SnapRAID in combination with #mergerfs (the drives themselves are simply #EXT4).

So far, honestly, so good. I got 2x 1TB SSDs for data, and another 1TB SSD for parity. Don't have a backup for the data themselves atm, but I do have a scheduled backup solution (#RaspiBackup) setup for the OS itself (SD card). It's also got #Timeshift for creating daily snapshots.

I'm not out of the woods yet though, cos after this comes the (somewhat) scary part - deploying #Immich on the Pi lol (using OMV's #Docker compose interface perhaps). I really could just deploy it in my #Proxmox #homelab, and I wouldn't have to worry about system resources or hardware transcoding, etc. but I really wanna experiment this 'everything hosted/contained in 1 Pi' concept.

Lately I've been doing more #SelfHosting again due to the current situation. Of course, I'm paying particular attention to power consumption and noise. After good experiences with the #ARM64 architecture, even with power-hungry applications such as Mastodon, I'm now using the smartphone technology for my homeservers, too.

There are #SBCs with more open hardware, but the #RaspberryPi is widely available, well documented, powerful and inexpensive. And it is available with up to 16 GB of RAM.

Anyone operating a server on the Internet must install #security updates quickly. However, many people forget to restart running software so that the new version runs instead of the old one. The #needrestart tool helps with this on Debian-based Linux systems, which unfortunately is usually not pre-installed.

On my Raspberry Pi 4, needrestart always runs correctly (automatically after apt upgrade). On my Raspberry Pi 5, however, I first had to create a configuration file as described by the main developer here:
https://github.com/liske/needrestart/blob/master/README.raspberry.md
Previously, the tool always claimed that a reboot was necessary because it thought an outdated Linux kernel was running.

Next, I want to activate #LUKS hard drive encryption on both raspis. Unfortunately, this is not as easy under #Raspbian or #RaspberryPiOS as on other Debian systems. If you have managed this: Please let me know how you did it!

#rpi #rpi5 #raspi #raspberrypi5 #homeserver #encryption #selfhost #selfhosted

Lately I've been doing more #SelfHosting again due to the current situation. Of course, I'm paying particular attention to power consumption and noise. After good experiences with the #ARM64 architecture, even with power-hungry applications such as Mastodon, I'm now using the smartphone technology for my homeservers, too.

There are #SBCs with more open hardware, but the #RaspberryPi is widely available, well documented, powerful and inexpensive. And it is available with up to 16 GB of RAM.

Anyone operating a server on the Internet must install #security updates quickly. However, many people forget to restart running software so that the new version runs instead of the old one. The #needrestart tool helps with this on Debian-based Linux systems, which unfortunately is usually not pre-installed.

On my Raspberry Pi 4, needrestart always runs correctly (automatically after apt upgrade). On my Raspberry Pi 5, however, I first had to create a configuration file as described by the main developer here:
https://github.com/liske/needrestart/blob/master/README.raspberry.md
Previously, the tool always claimed that a reboot was necessary because it thought an outdated Linux kernel was running.

Next, I want to activate #LUKS hard drive encryption on both raspis. Unfortunately, this is not as easy under #Raspbian or #RaspberryPiOS as on other Debian systems. If you have managed this: Please let me know how you did it!

#rpi #rpi5 #raspi #raspberrypi5 #homeserver #encryption #selfhost #selfhosted

Lately I've been doing more #SelfHosting again due to the current situation. Of course, I'm paying particular attention to power consumption and noise. After good experiences with the #ARM64 architecture, even with power-hungry applications such as Mastodon, I'm now using the smartphone technology for my homeservers, too.

There are #SBCs with more open hardware, but the #RaspberryPi is widely available, well documented, powerful and inexpensive. And it is available with up to 16 GB of RAM.

Anyone operating a server on the Internet must install #security updates quickly. However, many people forget to restart running software so that the new version runs instead of the old one. The #needrestart tool helps with this on Debian-based Linux systems, which unfortunately is usually not pre-installed.

On my Raspberry Pi 4, needrestart always runs correctly (automatically after apt upgrade). On my Raspberry Pi 5, however, I first had to create a configuration file as described by the main developer here:
https://github.com/liske/needrestart/blob/master/README.raspberry.md
Previously, the tool always claimed that a reboot was necessary because it thought an outdated Linux kernel was running.

Next, I want to activate #LUKS hard drive encryption on both raspis. Unfortunately, this is not as easy under #Raspbian or #RaspberryPiOS as on other Debian systems. If you have managed this: Please let me know how you did it!

#rpi #rpi5 #raspi #raspberrypi5 #homeserver #encryption #selfhost #selfhosted

Lately I've been doing more #SelfHosting again due to the current situation. Of course, I'm paying particular attention to power consumption and noise. After good experiences with the #ARM64 architecture, even with power-hungry applications such as Mastodon, I'm now using the smartphone technology for my homeservers, too.

There are #SBCs with more open hardware, but the #RaspberryPi is widely available, well documented, powerful and inexpensive. And it is available with up to 16 GB of RAM.

Anyone operating a server on the Internet must install #security updates quickly. However, many people forget to restart running software so that the new version runs instead of the old one. The #needrestart tool helps with this on Debian-based Linux systems, which unfortunately is usually not pre-installed.

On my Raspberry Pi 4, needrestart always runs correctly (automatically after apt upgrade). On my Raspberry Pi 5, however, I first had to create a configuration file as described by the main developer here:
https://github.com/liske/needrestart/blob/master/README.raspberry.md
Previously, the tool always claimed that a reboot was necessary because it thought an outdated Linux kernel was running.

Next, I want to activate #LUKS hard drive encryption on both raspis. Unfortunately, this is not as easy under #Raspbian or #RaspberryPiOS as on other Debian systems. If you have managed this: Please let me know how you did it!

#rpi #rpi5 #raspi #raspberrypi5 #homeserver #encryption #selfhost #selfhosted

Lately I've been doing more #SelfHosting again due to the current situation. Of course, I'm paying particular attention to power consumption and noise. After good experiences with the #ARM64 architecture, even with power-hungry applications such as Mastodon, I'm now using the smartphone technology for my homeservers, too.

There are #SBCs with more open hardware, but the #RaspberryPi is widely available, well documented, powerful and inexpensive. And it is available with up to 16 GB of RAM.

Anyone operating a server on the Internet must install #security updates quickly. However, many people forget to restart running software so that the new version runs instead of the old one. The #needrestart tool helps with this on Debian-based Linux systems, which unfortunately is usually not pre-installed.

On my Raspberry Pi 4, needrestart always runs correctly (automatically after apt upgrade). On my Raspberry Pi 5, however, I first had to create a configuration file as described by the main developer here:
https://github.com/liske/needrestart/blob/master/README.raspberry.md
Previously, the tool always claimed that a reboot was necessary because it thought an outdated Linux kernel was running.

Next, I want to activate #LUKS hard drive encryption on both raspis. Unfortunately, this is not as easy under #Raspbian or #RaspberryPiOS as on other Debian systems. If you have managed this: Please let me know how you did it!

#rpi #rpi5 #raspi #raspberrypi5 #homeserver #encryption #selfhost #selfhosted

In letzter Zeit mache ich aus gegebenem Anlass wieder mehr #SelfHosting. Natürlich achte ich dabei besonders auf den Stromverbrauch. Nach guten Erfahrungen mit der #ARM64-Architektur selbst bei leistungshungrigen Anwendungen wie Mastodon setze ich jetzt auch zuhause auf auf die aus Smartphones bekannte Technologie.

Es gibt zwar #SBCs mit offenerer Hardware, aber der #RaspberryPi ist überall erhältlich, gut dokumentiert, leistungsfähig und preiswert. Und es gibt ihn mit bis zu 16 GB RAM.

Wer einen Server am Internet betreibt, muss zügig #Sicherheitsupdates einspielen. Viele vergessen aber, laufende Software neuzustarten, damit die neue Version läuft statt der alten. Dabei hilft auf debianbasierten Linux-Systemen das Tool #needrestart, das leider meist nicht vorinstalliert ist.

Auf meinem Raspberry Pi 4 läuft needrestart schon immer korrekt (automatisch nach apt upgrade). Auf meinem Raspberry Pi 5 musste ich aber erst eine Konfigurationsdatei anlegen, wie es der Hauptentwickler hier beschreibt:
https://github.com/liske/needrestart/blob/master/README.raspberry.md
Bis dahin behauptete das Tool immer, dass ein reboot nötig sei, weil ein veralteter Linux-Kernel laufe.

Als nächstes will ich auf beiden Raspis die Festplattenverschlüsselung aktivieren. Das ist unter #Raspbian bzw. #RaspberryPiOS leider nicht so einfach wie auf anderen Debian-Systemen. Wenn ihr das geschafft habt: Schreibt gern eure Tipps!

#rpi #rpi5 #raspi #raspberrypi5 #homeserver #howto #til

In letzter Zeit mache ich aus gegebenem Anlass wieder mehr #SelfHosting. Natürlich achte ich dabei besonders auf den Stromverbrauch. Nach guten Erfahrungen mit der #ARM64-Architektur selbst bei leistungshungrigen Anwendungen wie Mastodon setze ich jetzt auch zuhause auf auf die aus Smartphones bekannte Technologie.

Es gibt zwar #SBCs mit offenerer Hardware, aber der #RaspberryPi ist überall erhältlich, gut dokumentiert, leistungsfähig und preiswert. Und es gibt ihn mit bis zu 16 GB RAM.

Wer einen Server am Internet betreibt, muss zügig #Sicherheitsupdates einspielen. Viele vergessen aber, laufende Software neuzustarten, damit die neue Version läuft statt der alten. Dabei hilft auf debianbasierten Linux-Systemen das Tool #needrestart, das leider meist nicht vorinstalliert ist.

Auf meinem Raspberry Pi 4 läuft needrestart schon immer korrekt (automatisch nach apt upgrade). Auf meinem Raspberry Pi 5 musste ich aber erst eine Konfigurationsdatei anlegen, wie es der Hauptentwickler hier beschreibt:
https://github.com/liske/needrestart/blob/master/README.raspberry.md
Bis dahin behauptete das Tool immer, dass ein reboot nötig sei, weil ein veralteter Linux-Kernel laufe.

Als nächstes will ich auf beiden Raspis die Festplattenverschlüsselung aktivieren. Das ist unter #Raspbian bzw. #RaspberryPiOS leider nicht so einfach wie auf anderen Debian-Systemen. Wenn ihr das geschafft habt: Schreibt gern eure Tipps!

#rpi #rpi5 #raspi #raspberrypi5 #homeserver #howto #til

In letzter Zeit mache ich aus gegebenem Anlass wieder mehr #SelfHosting. Natürlich achte ich dabei besonders auf den Stromverbrauch. Nach guten Erfahrungen mit der #ARM64-Architektur selbst bei leistungshungrigen Anwendungen wie Mastodon setze ich jetzt auch zuhause auf auf die aus Smartphones bekannte Technologie.

Es gibt zwar #SBCs mit offenerer Hardware, aber der #RaspberryPi ist überall erhältlich, gut dokumentiert, leistungsfähig und preiswert. Und es gibt ihn mit bis zu 16 GB RAM.

Wer einen Server am Internet betreibt, muss zügig #Sicherheitsupdates einspielen. Viele vergessen aber, laufende Software neuzustarten, damit die neue Version läuft statt der alten. Dabei hilft auf debianbasierten Linux-Systemen das Tool #needrestart, das leider meist nicht vorinstalliert ist.

Auf meinem Raspberry Pi 4 läuft needrestart schon immer korrekt (automatisch nach apt upgrade). Auf meinem Raspberry Pi 5 musste ich aber erst eine Konfigurationsdatei anlegen, wie es der Hauptentwickler hier beschreibt:
https://github.com/liske/needrestart/blob/master/README.raspberry.md
Bis dahin behauptete das Tool immer, dass ein reboot nötig sei, weil ein veralteter Linux-Kernel laufe.

Als nächstes will ich auf beiden Raspis die Festplattenverschlüsselung aktivieren. Das ist unter #Raspbian bzw. #RaspberryPiOS leider nicht so einfach wie auf anderen Debian-Systemen. Wenn ihr das geschafft habt: Schreibt gern eure Tipps!

#rpi #rpi5 #raspi #raspberrypi5 #homeserver #howto #til

In letzter Zeit mache ich aus gegebenem Anlass wieder mehr #SelfHosting. Natürlich achte ich dabei besonders auf den Stromverbrauch. Nach guten Erfahrungen mit der #ARM64-Architektur selbst bei leistungshungrigen Anwendungen wie Mastodon setze ich jetzt auch zuhause auf auf die aus Smartphones bekannte Technologie.

Es gibt zwar #SBCs mit offenerer Hardware, aber der #RaspberryPi ist überall erhältlich, gut dokumentiert, leistungsfähig und preiswert. Und es gibt ihn mit bis zu 16 GB RAM.

Wer einen Server am Internet betreibt, muss zügig #Sicherheitsupdates einspielen. Viele vergessen aber, laufende Software neuzustarten, damit die neue Version läuft statt der alten. Dabei hilft auf debianbasierten Linux-Systemen das Tool #needrestart, das leider meist nicht vorinstalliert ist.

Auf meinem Raspberry Pi 4 läuft needrestart schon immer korrekt (automatisch nach apt upgrade). Auf meinem Raspberry Pi 5 musste ich aber erst eine Konfigurationsdatei anlegen, wie es der Hauptentwickler hier beschreibt:
https://github.com/liske/needrestart/blob/master/README.raspberry.md
Bis dahin behauptete das Tool immer, dass ein reboot nötig sei, weil ein veralteter Linux-Kernel laufe.

Als nächstes will ich auf beiden Raspis die Festplattenverschlüsselung aktivieren. Das ist unter #Raspbian bzw. #RaspberryPiOS leider nicht so einfach wie auf anderen Debian-Systemen. Wenn ihr das geschafft habt: Schreibt gern eure Tipps!

#rpi #rpi5 #raspi #raspberrypi5 #homeserver #howto #til

In letzter Zeit mache ich aus gegebenem Anlass wieder mehr #SelfHosting. Natürlich achte ich dabei besonders auf den Stromverbrauch. Nach guten Erfahrungen mit der #ARM64-Architektur selbst bei leistungshungrigen Anwendungen wie Mastodon setze ich jetzt auch zuhause auf auf die aus Smartphones bekannte Technologie.

Es gibt zwar #SBCs mit offenerer Hardware, aber der #RaspberryPi ist überall erhältlich, gut dokumentiert, leistungsfähig und preiswert. Und es gibt ihn mit bis zu 16 GB RAM.

Wer einen Server am Internet betreibt, muss zügig #Sicherheitsupdates einspielen. Viele vergessen aber, laufende Software neuzustarten, damit die neue Version läuft statt der alten. Dabei hilft auf debianbasierten Linux-Systemen das Tool #needrestart, das leider meist nicht vorinstalliert ist.

Auf meinem Raspberry Pi 4 läuft needrestart schon immer korrekt (automatisch nach apt upgrade). Auf meinem Raspberry Pi 5 musste ich aber erst eine Konfigurationsdatei anlegen, wie es der Hauptentwickler hier beschreibt:
https://github.com/liske/needrestart/blob/master/README.raspberry.md
Bis dahin behauptete das Tool immer, dass ein reboot nötig sei, weil ein veralteter Linux-Kernel laufe.

Als nächstes will ich auf beiden Raspis die Festplattenverschlüsselung aktivieren. Das ist unter #Raspbian bzw. #RaspberryPiOS leider nicht so einfach wie auf anderen Debian-Systemen. Wenn ihr das geschafft habt: Schreibt gern eure Tipps!

#rpi #rpi5 #raspi #raspberrypi5 #homeserver #howto #til

Tests with my #ono case and #RaspberryPi 4. I’m trying to install #GNUstep on top of #Raspbian.

#RaspberryPi2 ei ole nopea, mutta hyvin tuo on kotitalouden nimipalvelimena pyörinyt jo kohta kymmenen vuotta – ensin #Raspbian'illa, sitten tovin #Ubuntu'lla ja nyt jo jonkin aikaa #FreeBSD:llä. #atkjuttuja

Dear #upgraded Friends, 🦋
As we may notice, #browsers, #hide and #sikh engines from #gag-all to #Vivaldi, #OS from #Apple #snap-all to #Raspbian R:
1. #Background #updating backwards ​:ablobcatgoogly:​
2. #Capitalizing their #monetization ​:gi:​
3. #Adding ad freeze #add-ons ​:blobangery:​

What is a gal to do when:
1. Ones #hybrid car #reports a 'go to dealer' message (braking fault) BUT when going to dealer... no fault is found AND one is charged £90 for the diagnostic search. Few weeks later another #life threatening #message appears on the #touch-screen. Would it be a nice little major #manufacturer, side earner by any chance? 🕊️
2. The #IOT is now #storing, #sharing and keeping data on devices we never really own. Ever. [oops] ​:ablobcatcoffee:​
3. Well... I am sure you have your own frustrations...​:ablobcatbouncefast:​

Be Kind to the #Automatic #Imbeciles (AI) ​:blobcatthx:​

Dear #Linux before breakfast friends, :ablobcouple:

Why use, not use or amuse #Penguin #empowered hardware? :ablobsunglasses:

Here is my #stirring #story from Windows to Linux user, be interested in ‘earing yours? :abloblurk:

I am #familiar with many #versions of Linux. The first one I tried was #Slackware which I installed from an already out dated #CD. It took me 5 weeks to sort of get a browser (#Netscape I seem to remember) on half the screen. I was #curious and my computer friends looked at this rather pathetic display with pity and #incomprehension. What madness was this? :byebrows:

I continued, getting Linux Magazine and realising I could barely understand 5% of what was being discussed.

I was a beginner again. So began #distro #hopping with very condescending ‘help’ from the penguinated.

However …

One pre alpha distro was able to provide me with advice on my numerous #questions. Eventually I settled on using this distro, once I got it working at speed. Puppy Linux. :ablobdancer:

#Puppy was small, VERY fast and continually different. As far as I was concerned if a distro was slow, why not use Windows or Apple? :ablobslurp:

I still distro hopped but worked very hard for much of the required donkey work for Puppy. I was #fascinated by programming languages but not much of a programmer. So it was mainly #Wiki, #forums and helping #noobs, which is were Puppy became much friendlier and usable. 🤣

After many #experiences, too many to go into I am now using a rolling release, #Manjaro, #Raspbian for my #Raspberry Pi’s and one olde computer with Puppy. Barry Kauler who created Puppy is now working on #EasyOS. However I am retired from new experimental distros. Now I prefer my Windows free #choice as I move towards #FOSS. Free and Open Source Software.

Quite a ride … How is yours going? :_stars:

Dear #Linux before breakfast friends, :ablobcouple:

Why use, not use or amuse #Penguin #empowered hardware? :ablobsunglasses:

Here is my #stirring #story from Windows to Linux user, be interested in ‘earing yours? :abloblurk:

I am #familiar with many #versions of Linux. The first one I tried was #Slackware which I installed from an already out dated #CD. It took me 5 weeks to sort of get a browser (#Netscape I seem to remember) on half the screen. I was #curious and my computer friends looked at this rather pathetic display with pity and #incomprehension. What madness was this? :byebrows:

I continued, getting Linux Magazine and realising I could barely understand 5% of what was being discussed.

I was a beginner again. So began #distro #hopping with very condescending ‘help’ from the penguinated.

However …

One pre alpha distro was able to provide me with advice on my numerous #questions. Eventually I settled on using this distro, once I got it working at speed. Puppy Linux. :ablobdancer:

#Puppy was small, VERY fast and continually different. As far as I was concerned if a distro was slow, why not use Windows or Apple? :ablobslurp:

I still distro hopped but worked very hard for much of the required donkey work for Puppy. I was #fascinated by programming languages but not much of a programmer. So it was mainly #Wiki, #forums and helping #noobs, which is were Puppy became much friendlier and usable. 🤣

After many #experiences, too many to go into I am now using a rolling release, #Manjaro, #Raspbian for my #Raspberry Pi’s and one olde computer with Puppy. Barry Kauler who created Puppy is now working on #EasyOS. However I am retired from new experimental distros. Now I prefer my Windows free #choice as I move towards #FOSS. Free and Open Source Software.

Quite a ride … How is yours going? :_stars:

@Linux_Is_Best I somehow got stuck with #SuSE all the years. Other distros I used only on special use cases... Like
- #kalilinux (hacking, if needed)
- #knoppix data rescue from #windows machines
- #raspbian #RaspberryPiOS for my #raspi s
- #venusOS on a raspberry for my #victron #solar system
- #pihole as my #DNS server

#edit : #language changed and #typo s

You can improve your home Wi-Fi reach with the power of #FOSS and a Raspberry Pi!

Follow the step-by-step guide from #Morrolinux for all the #opensource tools you need to create your very own #WiFi Repeater, from #Raspbian (the #Debian-based OS) to #NordVPN and more:

https://lpi.org/hbfu

#LPI #RaspberryPi #Raspbian #Github #LPI #IT #NordVPN #Linux #OSS #tech

/me was punished for forgetting to install log2ram on my #pihole. SD card corruption sucks.
However, the SD card went into read-only mode. So a restore was as easy as making a clone of the failed SD card onto a new one.
#raspberypi #raspbian

Hello. Any advice on how to use an OV5647 with the raspberry pi to use opencv with it? I already tried many times and I keep having issues with moduleError not found

Cannot use picamera2
#raspberrypi #opencv #raspbian #arducam #ov5647 #cv #computervision

Living in a #converted #bus and being an absolute #nerd
I have had ups and downs. But, I've managed to do things here that I didn't think were possible.

Here is a screenshot of my main "server" in the bus, a #RPI4 running #Raspbian and on it a few #Docker containers, torrent client and more. And as you can see the uptime on the machine is 58 days and counting =D

I also have quite a few ESP32s running as well as two or three #RPIZeroW SOCs here. And all running fantastically =D

I chose #Raspbian OS lite to get a fresh, fast, and clean #RadpberryPi. It was not only recommended, but I wanted to use #KIAUH ratger than using #MainsailOS.

This gave me more storage space, and I also knew what was already installed.

This also solved one of my problems when I used #Klipper with #Octoprint and #OctoKlipper.

I had a "mcu error," which I never could get a solution for. I had to restart my printer and Klipper repeatedly until they finally would connect.

This was solved by following the #Mainsail and #KIAUH docs and installing the Raspberry Pi MCU firmware.

These problems are now solved.

And damn, is this blazing fast.

Although I did clean my fan and heatsink and decided to #overclock my Raspberry Pi, the UI is so responsive I can live without my printer screen.

@3dprinting #3dprinting

Although I enjoyed my #Klipper transition. I stayed with #Octoprint, which was actually the final straw.

Although I could live without my printer's display, the lag and sluggish and slow #UI of Octoprint just pushed me over the limit. I felt as if I couldn't react to my printer anymore.

So with a heavy heart, I removed my SD card, wiped it and installed a clean version of #Raspbian OS Lite, and used #KIAUH to install #Klipper, #Mainsail, #KlipperScreen, #Crowsnest, #Moonraker and #Octoeverywhere

@3dprinting #3dprinting

#i3status is reporting -575.1% memory used on my Raspberry Pi 4 running Raspberry Pi OS.

WHAT.

format = " memdebug used=%used, percentage_used=%percentage_used, free=%free "
reports:
"memdebug used=1.5GiB, percentage_used=-589.6%, free=772.9 MiB"

free -h reports:
total used free shared buff/cache available
Mem: 3.7Gi 1.3Gi 764Mi 95Mi 1.7Gi 2.1Gi

#askfedi #help #i3wm #RasbperryPi #Raspbian

#Armbian 22.11 has been released.

What’s New?
- added Bananapi M5, Odroid M1 and Rockpi 4C plus
- enabled community images with weekly release cycle
- added ultra minimal images optimized for software deployment
- added RiscV64 UEFI build support
- improved support for Rockpi S
- kernel upgrade is frozen by default to improve stability
[...]

https://www.armbian.com/newsflash/armbian-22-11/

Regular downloads: https://www.armbian.com/download/
Community downloads: https://github.com/armbian/community

#sbc #bananapi #rockpi #odroid #raspberrypi #nanopi #orangepi #khadas #radxa #tinkerboard #zeropi #raspbian #debian

I wrote a blog on installing `#sar` on #Raspbian buster & #Ubuntu22.04 LTS to run with `#systemd`. TLDR don't configure #cron https://wp.me/pauVx4-1Oz

Aktueller Stand beim #t0ny-box Projekt: Warten auf das Paket mit dem IR Empfänger 🙃

Next Steps:
- lirc scripte testen und einbinden

Dokumentation (bald):
https://wiki.lemue.org/t0nybox

#xmms2 #mp3player #qrcode #papabastelt #selfmade #coding #qrcode #spielzeug #raspberrypi #toniebox #t0nybox #lirc #raspbian #raspberryos

@fedieltern

@spla @unmes

Si vols muntar una instància de #Mastodon en un #raspbian potser la manera més fàcil és usar #yunohost (https://yunohost.org/en/install/hardware:rpi2plus)

Yunohost és una mena d'instal·lador d'#aplicacions (serveis) fàcil, amb 4 clics, per usuaris que no son #administradorsDeSistemes o #informàtics en general.

Aquí tens una demo: https://yunohost.org/en/try?q=%2Ftry

I el catàleg d'apps:
https://yunohost.org/en/apps

#Mastodon no està destacada, l'has de buscar amb la lupa

@FreePietje: Yes, but there's another fact which might explain that initial naming:

#Raspbian AFAIK never (not sure about the very beginning though) offered images, just recompiled packages.

To my knowledge "Raspbian" images always came from the #RaspberryPiFoundation.

Another detail: Peter Green aka plugwash only became DD after Raspbian has become a success.

Nevertheless, the reason for the existence of Raspbian is still there: Debian still has a performance penalty on #RaspberryPi 0 + 1.