#pins — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #pins, aggregated by home.social.
-
Dans la série des pin's décoratifs à porter toute l'année pour emmerder les coincés du bulbe et parce qu'il est joliment décoré, je vous suggère aujourd'hui ce pin's du chat de la série britannique "Simon's cat".
Il est notamment disponible sur le sexshop gay AGayN à l'adresse https://www.agayn.com/boutique/?id=22656&aff=numasc
(notez que c'est un sexshop, y a donc des trucs NSFW dessus, ne l'ouvrez pas devant des enfants)
#Caturday #SimonsCat #Pins #RainbowFlag #PrideMonth #Pride #SexShop #GaySexShop
-
Dans la série des pin's décoratifs à porter toute l'année pour emmerder les coincés du bulbe et parce qu'il est joliment décoré, je vous suggère aujourd'hui ce pin's du chat de la série britannique "Simon's cat".
Il est notamment disponible sur le sexshop gay AGayN à l'adresse https://www.agayn.com/boutique/?id=22656&aff=numasc
(notez que c'est un sexshop, y a donc des trucs NSFW dessus, ne l'ouvrez pas devant des enfants)
#Caturday #SimonsCat #Pins #RainbowFlag #PrideMonth #Pride #SexShop #GaySexShop
-
Dans la série des pin's décoratifs à porter toute l'année pour emmerder les coincés du bulbe et parce qu'il est joliment décoré, je vous suggère aujourd'hui ce pin's du chat de la série britannique "Simon's cat".
Il est notamment disponible sur le sexshop gay AGayN à l'adresse https://www.agayn.com/boutique/?id=22656&aff=numasc
(notez que c'est un sexshop, y a donc des trucs NSFW dessus, ne l'ouvrez pas devant des enfants)
#Caturday #SimonsCat #Pins #RainbowFlag #PrideMonth #Pride #SexShop #GaySexShop
-
Dans la série des pin's décoratifs à porter toute l'année pour emmerder les coincés du bulbe et parce qu'il est joliment décoré, je vous suggère aujourd'hui ce pin's du chat de la série britannique "Simon's cat".
Il est notamment disponible sur le sexshop gay AGayN à l'adresse https://www.agayn.com/boutique/?id=22656&aff=numasc
(notez que c'est un sexshop, y a donc des trucs NSFW dessus, ne l'ouvrez pas devant des enfants)
#Caturday #SimonsCat #Pins #RainbowFlag #PrideMonth #Pride #SexShop #GaySexShop
-
we got pins now!
https://studio-pond.printify.me/ -
we got pins now!
https://studio-pond.printify.me/ -
we got pins now!
https://studio-pond.printify.me/ -
we got pins now!
https://studio-pond.printify.me/ -
we got pins now!
https://studio-pond.printify.me/ -
A while back I got a new digital 'scope. The one I'd been using was okay, but only 8-bit and had some other limitations. The vertical resolution was actually starting to make it difficult to get accurate-enough readings of some things I was working with.
The new one is 12-bit. That is likely to be better than I will ever need. I'm happy with it. Being several years newer (and a different brand) it brings some new #features to the table.
One is that you can use it as a digital logic analyzer - it can sample a whole lot of inputs (rather than just 4 analog channels) quickly if it only has to tell on from off. But you have to get a whole lot of #signals into the #scope before you can do that, so you need a #connector with a lot of pins/signals.
You could use something standard for this type of application (which is still going to be a limited-audience part), or a custom thing, but those options are expensive. So instead, if you're the manufacturer, you find a common (and therefore #cheap) #connector with lots of #pins, and you re-use that. Done and dusted!
They picked ... the HDMI connector. It's there at the bottom of the middle of the control panel. And in the manual is the prominent (not) warning:
> WARNING: Non-standard HDMI interface, Siglent device ONLY, or you will damage your device.
Yes, if you plug anything HDMI-related into this obvious #HDMI port, you will cause damage to your 'scope, or your other device.
-
A while back I got a new digital 'scope. The one I'd been using was okay, but only 8-bit and had some other limitations. The vertical resolution was actually starting to make it difficult to get accurate-enough readings of some things I was working with.
The new one is 12-bit. That is likely to be better than I will ever need. I'm happy with it. Being several years newer (and a different brand) it brings some new #features to the table.
One is that you can use it as a digital logic analyzer - it can sample a whole lot of inputs (rather than just 4 analog channels) quickly if it only has to tell on from off. But you have to get a whole lot of #signals into the #scope before you can do that, so you need a #connector with a lot of pins/signals.
You could use something standard for this type of application (which is still going to be a limited-audience part), or a custom thing, but those options are expensive. So instead, if you're the manufacturer, you find a common (and therefore #cheap) #connector with lots of #pins, and you re-use that. Done and dusted!
They picked ... the HDMI connector. It's there at the bottom of the middle of the control panel. And in the manual is the prominent (not) warning:
> WARNING: Non-standard HDMI interface, Siglent device ONLY, or you will damage your device.
Yes, if you plug anything HDMI-related into this obvious #HDMI port, you will cause damage to your 'scope, or your other device.
-
A while back I got a new digital 'scope. The one I'd been using was okay, but only 8-bit and had some other limitations. The vertical resolution was actually starting to make it difficult to get accurate-enough readings of some things I was working with.
The new one is 12-bit. That is likely to be better than I will ever need. I'm happy with it. Being several years newer (and a different brand) it brings some new #features to the table.
One is that you can use it as a digital logic analyzer - it can sample a whole lot of inputs (rather than just 4 analog channels) quickly if it only has to tell on from off. But you have to get a whole lot of #signals into the #scope before you can do that, so you need a #connector with a lot of pins/signals.
You could use something standard for this type of application (which is still going to be a limited-audience part), or a custom thing, but those options are expensive. So instead, if you're the manufacturer, you find a common (and therefore #cheap) #connector with lots of #pins, and you re-use that. Done and dusted!
They picked ... the HDMI connector. It's there at the bottom of the middle of the control panel. And in the manual is the prominent (not) warning:
> WARNING: Non-standard HDMI interface, Siglent device ONLY, or you will damage your device.
Yes, if you plug anything HDMI-related into this obvious #HDMI port, you will cause damage to your 'scope, or your other device.
-
A while back I got a new digital 'scope. The one I'd been using was okay, but only 8-bit and had some other limitations. The vertical resolution was actually starting to make it difficult to get accurate-enough readings of some things I was working with.
The new one is 12-bit. That is likely to be better than I will ever need. I'm happy with it. Being several years newer (and a different brand) it brings some new #features to the table.
One is that you can use it as a digital logic analyzer - it can sample a whole lot of inputs (rather than just 4 analog channels) quickly if it only has to tell on from off. But you have to get a whole lot of #signals into the #scope before you can do that, so you need a #connector with a lot of pins/signals.
You could use something standard for this type of application (which is still going to be a limited-audience part), or a custom thing, but those options are expensive. So instead, if you're the manufacturer, you find a common (and therefore #cheap) #connector with lots of #pins, and you re-use that. Done and dusted!
They picked ... the HDMI connector. It's there at the bottom of the middle of the control panel. And in the manual is the prominent (not) warning:
> WARNING: Non-standard HDMI interface, Siglent device ONLY, or you will damage your device.
Yes, if you plug anything HDMI-related into this obvious #HDMI port, you will cause damage to your 'scope, or your other device.
-
A while back I got a new digital 'scope. The one I'd been using was okay, but only 8-bit and had some other limitations. The vertical resolution was actually starting to make it difficult to get accurate-enough readings of some things I was working with.
The new one is 12-bit. That is likely to be better than I will ever need. I'm happy with it. Being several years newer (and a different brand) it brings some new #features to the table.
One is that you can use it as a digital logic analyzer - it can sample a whole lot of inputs (rather than just 4 analog channels) quickly if it only has to tell on from off. But you have to get a whole lot of #signals into the #scope before you can do that, so you need a #connector with a lot of pins/signals.
You could use something standard for this type of application (which is still going to be a limited-audience part), or a custom thing, but those options are expensive. So instead, if you're the manufacturer, you find a common (and therefore #cheap) #connector with lots of #pins, and you re-use that. Done and dusted!
They picked ... the HDMI connector. It's there at the bottom of the middle of the control panel. And in the manual is the prominent (not) warning:
> WARNING: Non-standard HDMI interface, Siglent device ONLY, or you will damage your device.
Yes, if you plug anything HDMI-related into this obvious #HDMI port, you will cause damage to your 'scope, or your other device.
-
Jochem en de Efteling-pins.
Jochem mag al sinds 2008 pins ontwerpen voor de Efteling en is ondertussen ook alweer bezig met toekomstige pins. Natuurlijk wilde hij ook nog even op de foto.
Mensen van “kantoor” krijg ik niet vaak de kans om vast te leggen, dus extra leuk dat dit moment er toch even was. En dan ook nog in zo’n prachtige zaal!!
#Efteling #Pins #EftelingPins #Pinverzameling #Pinbeurs #EftelingVerzamelaars #Themeparks #ThemeparkFans #Pretpark #PretparkFans #EftelingFans #Col…
-
https://www.europesays.com/ch/59294/ Zurich Insurance wins over UK’s Beazley with sweetened $11 billion bid proposal #BACT #Biz #BLR #CEEU #CH #CMPNY #DEAL1 #DEST:LITA #DEST:OINN #DEST:OMA #DEST:OUKBSM #DEST:OUSBSM #EMEA #EUROP #FIN #FINS #GB #hot #INSR #legal #MINS #MINS1 #MRG #MTPIX #NEWS1 #NRLPA:OINN #NRLPA:OMA #PINS #PINS1 #PUBL #PXP #REUTERSLEGAL #STX #TOPNWS #WEU #ZurichInsurance
-
@FotoVorschlag Tag der Arbeit, pins for Vänsterpartiet (V), left party in Sweden.
#FotoVorschlag #TagDerArbeit #Pins #Vänsterpartiet #LeftWingParty #March #LabourDay -
@FotoVorschlag Tag der Arbeit, pins for Vänsterpartiet (V), left party in Sweden.
#FotoVorschlag #TagDerArbeit #Pins #Vänsterpartiet #LeftWingParty #March #LabourDay -
@FotoVorschlag Tag der Arbeit, pins for Vänsterpartiet (V), left party in Sweden.
#FotoVorschlag #TagDerArbeit #Pins #Vänsterpartiet #LeftWingParty #March #LabourDay -
Working on my end of month newsletter for the patreon, including photos of all the things I made for the con suddenly at the last minute- (I always have ideas at the last minute - WHY) - like these these tiny wooden art jars that were made into pins + magnets :)
-
Working on my end of month newsletter for the patreon, including photos of all the things I made for the con suddenly at the last minute- (I always have ideas at the last minute - WHY) - like these these tiny wooden art jars that were made into pins + magnets :)
-
Working on my end of month newsletter for the patreon, including photos of all the things I made for the con suddenly at the last minute- (I always have ideas at the last minute - WHY) - like these these tiny wooden art jars that were made into pins + magnets :)
-
Working on my end of month newsletter for the patreon, including photos of all the things I made for the con suddenly at the last minute- (I always have ideas at the last minute - WHY) - like these these tiny wooden art jars that were made into pins + magnets :)
-
Working on my end of month newsletter for the patreon, including photos of all the things I made for the con suddenly at the last minute- (I always have ideas at the last minute - WHY) - like these these tiny wooden art jars that were made into pins + magnets :)
-
The folks at #Pins & #Aces have really taken this concept to new levels 🚀 with eye-catching wood #cover #designs 🎨 featuring everything from #NASA spacewalk graphics 🧑🚀🌌 and Teenage Mutant Ninja Turtles 🐢💥 to casino 🎰 and boxing glove 🥊 designs.
https://www.everysingletopic.com/small-investment-big-protection-why-your-fairway-woods-need-head-covers/ -
https://www.wacoca.com/life/386862/ 日本国債への投資、キャピタル益狙いはやや慎重＝住友生命・26年度運用計画 | ロイター ##us #AMERS #asia #ASXPAC #BACT #BIZ #BOJ #BOJJ #CEN #DBT #DEST:NOJPBSM #DEST:NOJPSUM #DEST:NOJPTPM #DEST:NOJPZTM #DIV #EASIA #Eco #FED #fes #FIN #FINS #FRX #FUND #GVD #INSR #INT #INTER #investment #JDOM #JLN #JP #LINS #MCE #NAMER #pins #RES #STX #toshi #投資
-
Pluralistic: Daily links from Cory Doctorow – No trackers, no ads. Black type, white background. Privacy policy: we don't collect or retain any data at all ever period. [Unofficial] @[email protected] ·Pluralistic: A free, open visual identity for enshittification (24 Apr 2026)
https://fed.brid.gy/r/https://pluralistic.net/2026/04/24/poop-emoji-plus-plus/
-
Berlin | Betrüger geben sich als Signal-Support aus – worauf achten?
Berlin (dpa/tmn) – Phishing ist eine Bedrohung, die nicht…
#Bielefeld #Deutschland #Deutsch #DE #Schlagzeilen #Headlines #Nachrichten #News #Europe #Europa #EU #Apps #Betrug #bfv #BSI #Codes #Computer #E-Mails #Germany #Internet #Kriminalität #Messenger #Nordrhein-Westfalen #Phishing #pins #Signal #Smartphones #SocialEngineering #Software #Support #Technik #Telekommunikation #tmn1130 #TPDS
https://www.europesays.com/de/964567/ -
I messed up and pre-packed a bunch of backerkit orders that I already shipped lol so the next 7 people who order JUST a tiny robots pin set from my shop will get a free matching sticker set! No time limit, I just got 7 of these sitting here all packed and waiting now: https://shop.aimeecozza.com/product/tiny-robots-pin-set/
-
I messed up and pre-packed a bunch of backerkit orders that I already shipped lol so the next 7 people who order JUST a tiny robots pin set from my shop will get a free matching sticker set! No time limit, I just got 7 of these sitting here all packed and waiting now: https://shop.aimeecozza.com/product/tiny-robots-pin-set/
-
I messed up and pre-packed a bunch of backerkit orders that I already shipped lol so the next 7 people who order JUST a tiny robots pin set from my shop will get a free matching sticker set! No time limit, I just got 7 of these sitting here all packed and waiting now: https://shop.aimeecozza.com/product/tiny-robots-pin-set/
-
I messed up and pre-packed a bunch of backerkit orders that I already shipped lol so the next 7 people who order JUST a tiny robots pin set from my shop will get a free matching sticker set! No time limit, I just got 7 of these sitting here all packed and waiting now: https://shop.aimeecozza.com/product/tiny-robots-pin-set/
-
Weer 10 prachtige pins uit de Wereld van de Efteling!
#Efteling #EftelingPins #Pins #Pinverzameling #Pincollecting #themeparks
📍 Efteling
-
I like wearing pins a little bit TOO much.
#selfie #pins #buttons #hardcore #hardcorepunk #socialism #aroace #anarchism #communism #satanism #occult
-
I like wearing pins a little bit TOO much.
#selfie #pins #buttons #hardcore #hardcorepunk #socialism #aroace #anarchism #communism #satanism #occult
-
I like wearing pins a little bit TOO much.
#selfie #pins #buttons #hardcore #hardcorepunk #socialism #aroace #anarchism #communism #satanism #occult
-
I like wearing pins a little bit TOO much.
#selfie #pins #buttons #hardcore #hardcorepunk #socialism #aroace #anarchism #communism #satanism #occult
-
I like wearing pins a little bit TOO much.
#selfie #pins #buttons #hardcore #hardcorepunk #socialism #aroace #anarchism #communism #satanism #occult
-
-
Des Pin's non-officiels (mais très jolis) pour la WWDC 2026 et les 50 ans d'Apple
https://mac4ever.com/195493
#Mac4Ever #Pins #WWDC -
Des Pin's non-officiels (mais très jolis) pour la WWDC 2026 et les 50 ans d'Apple
https://mac4ever.com/195493
#Mac4Ever #Pins #WWDC -
Des Pin's non-officiels (mais très jolis) pour la WWDC 2026 et les 50 ans d'Apple
https://mac4ever.com/195493
#Mac4Ever #Pins #WWDC -
Natural History Museum Gold Finish Lapel Pin | Ideal for Museum Staff or Docent Recognition Awards | Or Buy One For Yourself! | Choice of 3 finishes: silver, gold, gunmetal | In The Global Museum Store @zazzle https://zazzle.com/natural_history_museum_gold_finish_lapel_pin-256502558010514951?rf=238667188152553553 #Museums #globalmuseum #pins
-
Natural History Museum Gold Finish Lapel Pin | Ideal for Museum Staff or Docent Recognition Awards | Or Buy One For Yourself! | Choice of 3 finishes: silver, gold, gunmetal | In The Global Museum Store @zazzle https://zazzle.com/natural_history_museum_gold_finish_lapel_pin-256502558010514951?rf=238667188152553553 #Museums #globalmuseum #pins
-
Natural History Museum Gold Finish Lapel Pin | Ideal for Museum Staff or Docent Recognition Awards | Or Buy One For Yourself! | Choice of 3 finishes: silver, gold, gunmetal | In The Global Museum Store @zazzle https://zazzle.com/natural_history_museum_gold_finish_lapel_pin-256502558010514951?rf=238667188152553553 #Museums #globalmuseum #pins
-
Natural History Museum Gold Finish Lapel Pin | Ideal for Museum Staff or Docent Recognition Awards | Or Buy One For Yourself! | Choice of 3 finishes: silver, gold, gunmetal | In The Global Museum Store @zazzle https://zazzle.com/natural_history_museum_gold_finish_lapel_pin-256502558010514951?rf=238667188152553553 #Museums #globalmuseum #pins
-
Natural History Museum Gold Finish Lapel Pin | Ideal for Museum Staff or Docent Recognition Awards | Or Buy One For Yourself! | Choice of 3 finishes: silver, gold, gunmetal | In The Global Museum Store @zazzle https://zazzle.com/natural_history_museum_gold_finish_lapel_pin-256502558010514951?rf=238667188152553553 #Museums #globalmuseum #pins
