home.social

#pads — Public Fediverse posts

Live and recent posts from across the Fediverse tagged #pads, aggregated by home.social.

  1. 1986 by The Crow Hill Company 🎛️
    Prophet-VS-inspired synth w/ JX3P, Wurlitzer layers, EP/expr/chorus/delays/conv reverb.

    💻 Mac/Win (AU/VST/VST3/AAX)
    🎁 FREE (reg. £3.00) until 30 Sep 2026
    🔗 thecrowhillcompany.com/1986-sy

    More freeware 👉 linktr.ee/legalvst

    #freeplugin #synthplugin #80ssynth #vintage #pads #bells #strings #emotive

  2. 1986 by The Crow Hill Company 🎛️
    Prophet-VS-inspired synth w/ JX3P, Wurlitzer layers, EP/expr/chorus/delays/conv reverb.

    💻 Mac/Win (AU/VST/VST3/AAX)
    🎁 FREE (reg. £3.00) until 30 Sep 2026
    🔗 thecrowhillcompany.com/1986-sy

    More freeware 👉 linktr.ee/legalvst

    #freeplugin #synthplugin #80ssynth #vintage #pads #bells #strings #emotive

  3. 1986 by The Crow Hill Company 🎛️
    Prophet-VS-inspired synth w/ JX3P, Wurlitzer layers, EP/expr/chorus/delays/conv reverb.

    💻 Mac/Win (AU/VST/VST3/AAX)
    🎁 FREE (reg. £3.00) until 30 Sep 2026
    🔗 thecrowhillcompany.com/1986-sy

    More freeware 👉 linktr.ee/legalvst

    #freeplugin #synthplugin #80ssynth #vintage #pads #bells #strings #emotive

  4. 1986 by The Crow Hill Company 🎛️
    Prophet-VS-inspired synth w/ JX3P, Wurlitzer layers, EP/expr/chorus/delays/conv reverb.

    💻 Mac/Win (AU/VST/VST3/AAX)
    🎁 FREE (reg. £3.00) until 30 Sep 2026
    🔗 thecrowhillcompany.com/1986-sy

    More freeware 👉 linktr.ee/legalvst

    #freeplugin #synthplugin #80ssynth #vintage #pads #bells #strings #emotive

  5. 1986 by The Crow Hill Company 🎛️
    Prophet-VS-inspired synth w/ JX3P, Wurlitzer layers, EP/expr/chorus/delays/conv reverb.

    💻 Mac/Win (AU/VST/VST3/AAX)
    🎁 FREE (reg. £3.00) until 30 Sep 2026
    🔗 thecrowhillcompany.com/1986-sy

    More freeware 👉 linktr.ee/legalvst

    #freeplugin #synthplugin #80ssynth #vintage #pads #bells #strings #emotive

  6. Look what came in the mail today wile I was asleep 😸✌️ #blutooth #sega #pads

  7. Look what came in the mail today wile I was asleep 😸✌️ #blutooth #sega #pads

  8. Look what came in the mail today wile I was asleep 😸✌️ #blutooth #sega #pads

  9. Look what came in the mail today wile I was asleep 😸✌️ #blutooth #sega #pads

  10. Look what came in the mail today wile I was asleep 😸✌️ #blutooth #sega #pads

  11. Vital Calmness by Vicious Antelope 🌌
    40 soothing pad presets for Vital. Sine-based wavetable, ambient focus.

    💻 Vital
    🎁 FREE (reg. $4.00) until 15 Feb 2026
    🔗 Link in bio!

    #freeplugin #vitalpresets #ambient #pads #viciousantelope #musicproduction

  12. Preparing pads for SpaceX’s future Starship cadence

    1 As SpaceX ramps up production and testing of its Starship vehicles and engines, significant advancements are unfolding…
    #NewsBeep #News #US #USA #UnitedStates #UnitedStatesOfAmerica #Space #37 #39A #Pads #Science #spaceX #starbase #starship
    newsbeep.com/us/302716/

  13. Preparing pads for SpaceX’s future Starship cadence

    1 As SpaceX ramps up production and testing of its Starship vehicles and engines, significant advancements are unfolding…
    #NewsBeep #News #US #USA #UnitedStates #UnitedStatesOfAmerica #Space #37 #39A #Pads #Science #spaceX #starbase #starship
    newsbeep.com/us/302716/

  14. Preparing pads for SpaceX’s future Starship cadence

    1 As SpaceX ramps up production and testing of its Starship vehicles and engines, significant advancements are unfolding…
    #NewsBeep #News #Space #37 #39A #AU #Australia #Pads #Science #SpaceX #Starbase #Starship
    newsbeep.com/au/296424/

  15. Frage | Nextcloud Pads und Textdateien am Smartphone öffnen und bearbeiten?


    Es gibt ja fürs Smartphone diese nette Nextcloud App, welche ich auch schon länger im Einsatz habe. Aber wie öffne und bearbeite ich Pads und Textdateien (Markdown)? Den von sich aus kann das die Nextcloud App das anscheinend nicht.

    #Frage #Nextcloud #Smartphone #Android #Pads #Textdateien #2025-09-03 @askfedi_de @askfedi

  16. Frage | Nextcloud Pads und Textdateien am Smartphone öffnen und bearbeiten?


    Es gibt ja fürs Smartphone diese nette Nextcloud App, welche ich auch schon länger im Einsatz habe. Aber wie öffne und bearbeite ich Pads und Textdateien (Markdown)? Den von sich aus kann das die Nextcloud App das anscheinend nicht.

    #Frage #Nextcloud #Smartphone #Android #Pads #Textdateien #2025-09-03 @askfedi_de @askfedi

  17. Frage | Nextcloud Pads und Textdateien am Smartphone öffnen und bearbeiten?


    Es gibt ja fürs Smartphone diese nette Nextcloud App, welche ich auch schon länger im Einsatz habe. Aber wie öffne und bearbeite ich Pads und Textdateien (Markdown)? Den von sich aus kann das die Nextcloud App das anscheinend nicht.

    #Frage #Nextcloud #Smartphone #Android #Pads #Textdateien #2025-09-03 @askfedi_de @askfedi

  18. Frage | Nextcloud Pads und Textdateien am Smartphone öffnen und bearbeiten?


    Es gibt ja fürs Smartphone diese nette Nextcloud App, welche ich auch schon länger im Einsatz habe. Aber wie öffne und bearbeite ich Pads und Textdateien (Markdown)? Den von sich aus kann das die Nextcloud App das anscheinend nicht.

    #Frage #Nextcloud #Smartphone #Android #Pads #Textdateien #2025-09-03 @askfedi_de @askfedi

  19. Frage | Nextcloud Pads und Textdateien am Smartphone öffnen und bearbeiten?


    Es gibt ja fürs Smartphone diese nette Nextcloud App, welche ich auch schon länger im Einsatz habe. Aber wie öffne und bearbeite ich Pads und Textdateien (Markdown)? Den von sich aus kann das die Nextcloud App das anscheinend nicht.

    #Frage #Nextcloud #Smartphone #Android #Pads #Textdateien #2025-09-03 @askfedi_de @askfedi

  20. Buffalo Bills’ injury list gets much longer as team throws on pads at training camp

    The Buffalo Bills injury list has significantly grown over the first few days of tra…
    #NFL #BuffaloBills #Buffalo #Bills #as #at #buffalo-bills-depth-chart #buffalo-bills-injuries #buffalo-bills-roster #buffalo-bills-training-camp #camp #category-inury-reports #Football #front-page #gets #injury #list #longer #much #NFLTrainingCamp #on #pads #rumblings #team #throws #Training
    rawchili.com/nfl/243614/

  21. 🎹 Keys hits the wrong pad patch and suddenly it’s 1987. Band’s in C, keys are in space. Congregation floats into a synth cloud. Pastor delays sermon to ride the vibe. CoreZeroStudio.com
    #corezerostudio #mainerecordingstudio #mainemusic #keys #pads #worshipfails #synthsofglory

  22. About that BusBoard Prototype Systems SB4 board -- they're expensive. They're more than $6 each (Canadian) plus shipping from DigiKey. They're $10 each plus shipping from Mouser.

    That's a lot for a hobbyist when you're experimenting, especially if you're making mistakes.

    I looked around again recently, and couldn't find anything I liked at a reasonable price point.

    So what does one do in this situation? Well, if you go Overkill 9000, you design your own prototyping perfboard and have a bunch manufactured for you! When you design your own, you can give it any features you like. So this one has:

    18 x 36 (648 holes total)

    It's two 18 x 18 sections, though I didn't have them scored for snapping.

    A total of 6 horizontal busses in groups of 2, at the top and bottom plus one in the middle.

    3 sets of 2 vertical busses within that space between horizontal bus sets, similarly edge - center - edge.

    Then each row has a 6-hole pad on each side of the center 2 busses, which are spaced for IC or other standard 0.4" component layout.

    Made of proper FR4 fiberglass. Good copper, good soldermask.

    Silkscreened row and column IDs on both the front and back, at both the start and end of each row/column (and they match up with the back...).

    And silkscreened boxes on the front showing the pad/buss pattern - no more flipping!

    They arrived today and ... they're beautiful.

    2/x

    #PCB #CustomPCB #silkscreen #overkill #Overkill9000 #buss #busses #pads #components #IC #DIP

  23. About that BusBoard Prototype Systems SB4 board -- they're expensive. They're more than $6 each (Canadian) plus shipping from DigiKey. They're $10 each plus shipping from Mouser.

    That's a lot for a hobbyist when you're experimenting, especially if you're making mistakes.

    I looked around again recently, and couldn't find anything I liked at a reasonable price point.

    So what does one do in this situation? Well, if you go Overkill 9000, you design your own prototyping perfboard and have a bunch manufactured for you! When you design your own, you can give it any features you like. So this one has:

    18 x 36 (648 holes total)

    It's two 18 x 18 sections, though I didn't have them scored for snapping.

    A total of 6 horizontal busses in groups of 2, at the top and bottom plus one in the middle.

    3 sets of 2 vertical busses within that space between horizontal bus sets, similarly edge - center - edge.

    Then each row has a 6-hole pad on each side of the center 2 busses, which are spaced for IC or other standard 0.4" component layout.

    Made of proper FR4 fiberglass. Good copper, good soldermask.

    Silkscreened row and column IDs on both the front and back, at both the start and end of each row/column (and they match up with the back...).

    And silkscreened boxes on the front showing the pad/buss pattern - no more flipping!

    They arrived today and ... they're beautiful.

    2/x

    #PCB #CustomPCB #silkscreen #overkill #Overkill9000 #buss #busses #pads #components #IC #DIP

  24. About that BusBoard Prototype Systems SB4 board -- they're expensive. They're more than $6 each (Canadian) plus shipping from DigiKey. They're $10 each plus shipping from Mouser.

    That's a lot for a hobbyist when you're experimenting, especially if you're making mistakes.

    I looked around again recently, and couldn't find anything I liked at a reasonable price point.

    So what does one do in this situation? Well, if you go Overkill 9000, you design your own prototyping perfboard and have a bunch manufactured for you! When you design your own, you can give it any features you like. So this one has:

    18 x 36 (648 holes total)

    It's two 18 x 18 sections, though I didn't have them scored for snapping.

    A total of 6 horizontal busses in groups of 2, at the top and bottom plus one in the middle.

    3 sets of 2 vertical busses within that space between horizontal bus sets, similarly edge - center - edge.

    Then each row has a 6-hole pad on each side of the center 2 busses, which are spaced for IC or other standard 0.4" component layout.

    Made of proper FR4 fiberglass. Good copper, good soldermask.

    Silkscreened row and column IDs on both the front and back, at both the start and end of each row/column (and they match up with the back...).

    And silkscreened boxes on the front showing the pad/buss pattern - no more flipping!

    They arrived today and ... they're beautiful.

    2/x

    #PCB #CustomPCB #silkscreen #overkill #Overkill9000 #buss #busses #pads #components #IC #DIP

  25. About that BusBoard Prototype Systems SB4 board -- they're expensive. They're more than $6 each (Canadian) plus shipping from DigiKey. They're $10 each plus shipping from Mouser.

    That's a lot for a hobbyist when you're experimenting, especially if you're making mistakes.

    I looked around again recently, and couldn't find anything I liked at a reasonable price point.

    So what does one do in this situation? Well, if you go Overkill 9000, you design your own prototyping perfboard and have a bunch manufactured for you! When you design your own, you can give it any features you like. So this one has:

    18 x 36 (648 holes total)

    It's two 18 x 18 sections, though I didn't have them scored for snapping.

    A total of 6 horizontal busses in groups of 2, at the top and bottom plus one in the middle.

    3 sets of 2 vertical busses within that space between horizontal bus sets, similarly edge - center - edge.

    Then each row has a 6-hole pad on each side of the center 2 busses, which are spaced for IC or other standard 0.4" component layout.

    Made of proper FR4 fiberglass. Good copper, good soldermask.

    Silkscreened row and column IDs on both the front and back, at both the start and end of each row/column (and they match up with the back...).

    And silkscreened boxes on the front showing the pad/buss pattern - no more flipping!

    They arrived today and ... they're beautiful.

    2/x

    #PCB #CustomPCB #silkscreen #overkill #Overkill9000 #buss #busses #pads #components #IC #DIP

  26. About that BusBoard Prototype Systems SB4 board -- they're expensive. They're more than $6 each (Canadian) plus shipping from DigiKey. They're $10 each plus shipping from Mouser.

    That's a lot for a hobbyist when you're experimenting, especially if you're making mistakes.

    I looked around again recently, and couldn't find anything I liked at a reasonable price point.

    So what does one do in this situation? Well, if you go Overkill 9000, you design your own prototyping perfboard and have a bunch manufactured for you! When you design your own, you can give it any features you like. So this one has:

    18 x 36 (648 holes total)

    It's two 18 x 18 sections, though I didn't have them scored for snapping.

    A total of 6 horizontal busses in groups of 2, at the top and bottom plus one in the middle.

    3 sets of 2 vertical busses within that space between horizontal bus sets, similarly edge - center - edge.

    Then each row has a 6-hole pad on each side of the center 2 busses, which are spaced for IC or other standard 0.4" component layout.

    Made of proper FR4 fiberglass. Good copper, good soldermask.

    Silkscreened row and column IDs on both the front and back, at both the start and end of each row/column (and they match up with the back...).

    And silkscreened boxes on the front showing the pad/buss pattern - no more flipping!

    They arrived today and ... they're beautiful.

    2/x

    #PCB #CustomPCB #silkscreen #overkill #Overkill9000 #buss #busses #pads #components #IC #DIP

  27. ¿Que utilidad bajo #Linux #Mint #ubuntu utilizais para gestionar/administrar vuestros #joysticks o #pads ? Estaba usando #jstest pero estan caidos los enlaces, incluso de los repos...