#overclock — Public Fediverse posts

https://www.europesays.com/ro/118265/ Thermal Grizzly s-a apucat de vândut procesoare gata de overclock #AMD #overclock #procesoare #RO #Română #Romania #Romanian #Ryzen #Technology #tehnologie #ThermalGrizzly

AMD Ryzen 7 9850X3D surpreende em overclock e atinge os 5,75 GHz antes da estreia
🔗 https://tugatech.com.pt/t77060-amd-ryzen-7-9850x3d-surpreende-em-overclock-e-atinge-os-575-ghz-antes-da-estreia

#amd #ghz #os #overclock #ryzen 

ASRock X870E Taichi OCF Leads New AMD Boards for Overclock Records

#amd #ASRock #motherboard #Overclock #X870E
https://blazetrends.com/asrock-x870e-taichi-ocf-leads-new-amd-boards-for-overclock-records/?fsp_sid=71258

Got late to the party of the best putty on the market.

“I used to but thermal pads, a lot of them, until I got Upsiren UTP-8 and never looked back”

How good is it?

“Best shit since sliced bread”

https://www.overclock.net/threads/thermal-putty-vs-thermal-pads-comparison-chart.1810430/

#PC #PCHardware #Hardware #Thermals #Overclock #Overclocking #Computer #Computers #Technology #GPU #CPU #VRAM

Finally I got my hands - here in turkey - on
2x Raspberry #Pico2 for #RunCPM ;)
At 300Mhz #overclock the Pico2 in ARM-CPU-Mode
is around double as fast as a Pico1 overclocked at 270Mhz
So the emulated Z80 is now at
73.05Mhz (Pico2) against 38.55Mhz (Pico1)

Enable XMP in your BIOS, a sort of overclock for your RAM modules that lets you achieve the speed and latency numbers advertised by your RAM kit. It's a one-click improvement to the performance of your PC.

#bios #xmp #overclock #ram #performance
https://www.xda-developers.com/if-you-havent-enabled-xmp-in-your-bios-youre-leaving-performance-on-the-table/

💡 G.Skill lancia le DDR5 Trident Z5 Royal Neo a bassa latenza

https://gomoot.com/g-skill-lancia-le-ddr5-trident-z5-royal-neo-a-bassa-latenza

#amd #amdexpo #bios #blog #DDR5 #DRAM #gskill #news #overclock #picks #ram #rgb #ryzen #tech #tecnologia #tridentz5 @gskillgaming

¡Nvidia sorprende! 🎮💡 Project G-Assist, el asistente #IA que te saca de apuros en juegos y potencia tu PC con #overclock y #undervoltaje automáticos. 🚀🔧 #Nvidia revoluciona la experiencia #gaming en #Computex2024. ¿Te gusta la idea? #RTX #GPUpower https://bit.ly/3X58j1B

The Raspberry Pi Zero 2 W seems stable with an overclock ARM frequency of 1000. I tried setting it to 1200 but the emulation software kept randomly crashing.

#RaspberryPi
#Overclock
#Emulation

Also memory training with 32 gigs on Zen 4 takes a while. Holy shit. I don't even want to imagine how many minutes it takes to boot with people who have 128 gigabytes of RAM. Or even 64. Because this takes like 30 to 45 seconds for me. Sometimes. Not all the time for some reason.

#amd #ryzen #overclock

I think I have lost the silicon lottery on my Pi5 - can't keep it over clocked to 3Ghz even with the official cooler and power supply. #RaspberryPi5 #OverClock @[email protected]

270Mhz #overclock #RunCPM v6.1 .uf2 #binary
(GREEN or RED LED)
for the #RC2040 at
https://github.com/guidol70/RunCPM_RPi_Pico/raw/main/GL20231019_RunCPM_v6_1_RC2040_Binary.zip

#LiveToOverclock #Overclock #HDMI #Displayport #Nvidia

Купил провод DP, пришёл домой, увидел что купил DP to HDMI :\
Думаю ладно, пофиг. Читаю инструкцию а там: Max res: 1920x1080 60 Hz
Думаю всё, приплыли. Плакали мои 144 герца. Втыкаю провод, включаю комп, вижу 60 герц, плачу, запускаю панель Энвидэ, ставлю 144 герца, И О ЧУДО, Я разогнал переходник и получил 144 герца! Вот только после этого кабель начал свистеть ультразвуком (Как комар или дешёвый китайский блок питания) :blobcatfearful:
Но после перезапуска монитора писк пропал. Можно сказать что я разогнал переходник :ablobcatrainbow:

Considering how often the system did freeze after the #RAM upgrade from #DDR4 2133 to 3200 this was deserved.

Hope all future double checks turn out to be correct after UEFI update and reset.

#Prime95 #GIMPS #XMP #overclocking #OC #overclock

Considering how often the system did freeze after the #RAM upgrade from #DDR4 2133 to 3200 this was deserved.

Hope all future double checks turn out to be correct after UEFI update and reset.

#Prime95 #GIMPS #XMP #overclocking #OC #overclock

Considering how often the system did freeze after the #RAM upgrade from #DDR4 2133 to 3200 this was deserved.

Hope all future double checks turn out to be correct after UEFI update and reset.

#Prime95 #GIMPS #XMP #overclocking #OC #overclock

I chose #Raspbian OS lite to get a fresh, fast, and clean #RadpberryPi. It was not only recommended, but I wanted to use #KIAUH ratger than using #MainsailOS.

This gave me more storage space, and I also knew what was already installed.

This also solved one of my problems when I used #Klipper with #Octoprint and #OctoKlipper.

I had a "mcu error," which I never could get a solution for. I had to restart my printer and Klipper repeatedly until they finally would connect.

This was solved by following the #Mainsail and #KIAUH docs and installing the Raspberry Pi MCU firmware.

These problems are now solved.

And damn, is this blazing fast.

Although I did clean my fan and heatsink and decided to #overclock my Raspberry Pi, the UI is so responsive I can live without my printer screen.

@3dprinting #3dprinting

I chose #Raspbian OS lite to get a fresh, fast, and clean #RadpberryPi. It was not only recommended, but I wanted to use #KIAUH ratger than using #MainsailOS.

This gave me more storage space, and I also knew what was already installed.

This also solved one of my problems when I used #Klipper with #Octoprint and #OctoKlipper.

I had a "mcu error," which I never could get a solution for. I had to restart my printer and Klipper repeatedly until they finally would connect.

This was solved by following the #Mainsail and #KIAUH docs and installing the Raspberry Pi MCU firmware.

These problems are now solved.

And damn, is this blazing fast.

Although I did clean my fan and heatsink and decided to #overclock my Raspberry Pi, the UI is so responsive I can live without my printer screen.

@3dprinting #3dprinting

I chose #Raspbian OS lite to get a fresh, fast, and clean #RadpberryPi. It was not only recommended, but I wanted to use #KIAUH ratger than using #MainsailOS.

This gave me more storage space, and I also knew what was already installed.

This also solved one of my problems when I used #Klipper with #Octoprint and #OctoKlipper.

I had a "mcu error," which I never could get a solution for. I had to restart my printer and Klipper repeatedly until they finally would connect.

This was solved by following the #Mainsail and #KIAUH docs and installing the Raspberry Pi MCU firmware.

These problems are now solved.

And damn, is this blazing fast.

Although I did clean my fan and heatsink and decided to #overclock my Raspberry Pi, the UI is so responsive I can live without my printer screen.

@3dprinting #3dprinting

I chose #Raspbian OS lite to get a fresh, fast, and clean #RadpberryPi. It was not only recommended, but I wanted to use #KIAUH ratger than using #MainsailOS.

This gave me more storage space, and I also knew what was already installed.

This also solved one of my problems when I used #Klipper with #Octoprint and #OctoKlipper.

I had a "mcu error," which I never could get a solution for. I had to restart my printer and Klipper repeatedly until they finally would connect.

This was solved by following the #Mainsail and #KIAUH docs and installing the Raspberry Pi MCU firmware.

These problems are now solved.

And damn, is this blazing fast.

Although I did clean my fan and heatsink and decided to #overclock my Raspberry Pi, the UI is so responsive I can live without my printer screen.

@3dprinting #3dprinting

I chose #Raspbian OS lite to get a fresh, fast, and clean #RadpberryPi. It was not only recommended, but I wanted to use #KIAUH ratger than using #MainsailOS.

This gave me more storage space, and I also knew what was already installed.

This also solved one of my problems when I used #Klipper with #Octoprint and #OctoKlipper.

I had a "mcu error," which I never could get a solution for. I had to restart my printer and Klipper repeatedly until they finally would connect.

This was solved by following the #Mainsail and #KIAUH docs and installing the Raspberry Pi MCU firmware.

These problems are now solved.

And damn, is this blazing fast.

Although I did clean my fan and heatsink and decided to #overclock my Raspberry Pi, the UI is so responsive I can live without my printer screen.

@3dprinting #3dprinting

Bueno, pues ya está la #RaspberryPi con su nuevo disipador! Un Ice Tower de S2Pi
Vaya que hay diferencia!
De 69-71 grados con los disipadores pasivos a 30-32 con el disipador nuevo y con #Overclock de 1.5 en stock, 2.3 durante un año y 2.6 GHz actualmente

Ahora el servidor se ejecuta más fluido y eficiente

After just a few minor tweaks in the BIOS the #Timespy 1.2 score is 14136, with a GPU score of 14599 and CPU score of 11985. This is with a minor GPU #overclock of +150 core and +750 memory. Next step is to watch some videos on DDR4 overclocking and Ryzen tuning and see how high I can get that CPU score. #PCUpgrade #PCHardware

@netkitty Kitn iz #overclock

SAI Tech Reveals 2 New Liquid Cooling Bitcoin Mining Containers Built for Overclocking Flexibility

https://news.bitcoin.com/sai-tech-reveals-2-new-liquid-cooling-bitcoin-mining-containers-built-for-overclocking-flexibility/

#wasteheatrecoverycapability #mobileminingfarmmodules #MicrobtWhatsminers #TankboxandRackbox #miningcapacity #BitcoinMiners #Bitcoinmining #miningbitcoin #cryptomining #AntminerS19 #ASICminers #Containers #underclock #BTCMining #flaredgas #overclock #Petahash #BitDeer

Teensy 4 Pushed to the Limit with 1 GHz Overclock - Do you need a microcontroller that runs at 1 GHz? No, probably not. But that didn’... - https://hackaday.com/2022/01/02/teensy-4-pushed-to-the-limit-with-1-ghz-overclock/ #microcontrollers #laptopcooling #overclock #teensy4.1 #heatsink #teensy4

Die Lapping For Better CPU Performance - CPUs generate their heat in the silicon die that does all those wonderful calculations which make ... more: https://hackaday.com/2020/07/21/die-lapping-for-better-cpu-performance/ #computerhacks #overclocking #overclock #cpu