#oneui6watch — Public Fediverse posts

Galaxy Watch6 receives a new January 2026 update!

Samsung has started rolling out a new software update that upgrades the security patch level to January 1st, 2026, to the Galaxy Watch6 series, starting from Korea. The flagship watches will be updated to the following versions:

• Galaxy Watch6 40mm (BT and Cellular, SM-R930/R935x): CZA1
• Galaxy Watch6 44mm (BT and Cellular, SM-R940/R945x): CZA1
• Galaxy Watch6 Classic 40mm (BT and Cellular, SM-R950/R955x): CZA1
• Galaxy Watch6 Classic 44mm (BT and Cellular, SM-R960/R965x): CZA1

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#Android #GalaxyWatch6 #GalaxyWatch6Classic #news #oneUi #OneUI6Watch #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #smartwatch #Smartwatches #Tech #Technology #update #Watch #Watch6 #Watch6Classic #Wearable

Galaxy Watch6 receives a new January 2026 update!

Samsung has started rolling out a new software update that upgrades the security patch level to January 1st, 2026, to the Galaxy Watch6 series, starting from Korea. The flagship watches will be updated to the following versions:

• Galaxy Watch6 40mm (BT and Cellular, SM-R930/R935x): CZA1
• Galaxy Watch6 44mm (BT and Cellular, SM-R940/R945x): CZA1
• Galaxy Watch6 Classic 40mm (BT and Cellular, SM-R950/R955x): CZA1
• Galaxy Watch6 Classic 44mm (BT and Cellular, SM-R960/R965x): CZA1

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#Android #GalaxyWatch6 #GalaxyWatch6Classic #news #oneUi #OneUI6Watch #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #smartwatch #Smartwatches #Tech #Technology #update #Watch #Watch6 #Watch6Classic #Wearable

Galaxy Watch6 receives a new January 2026 update!

Samsung has started rolling out a new software update that upgrades the security patch level to January 1st, 2026, to the Galaxy Watch6 series, starting from Korea. The flagship watches will be updated to the following versions:

• Galaxy Watch6 40mm (BT and Cellular, SM-R930/R935x): CZA1
• Galaxy Watch6 44mm (BT and Cellular, SM-R940/R945x): CZA1
• Galaxy Watch6 Classic 40mm (BT and Cellular, SM-R950/R955x): CZA1
• Galaxy Watch6 Classic 44mm (BT and Cellular, SM-R960/R965x): CZA1

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#Android #GalaxyWatch6 #GalaxyWatch6Classic #news #oneUi #OneUI6Watch #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #smartwatch #Smartwatches #Tech #Technology #update #Watch #Watch6 #Watch6Classic #Wearable

Galaxy Watch6 receives a new January 2026 update!

Samsung has started rolling out a new software update that upgrades the security patch level to January 1st, 2026, to the Galaxy Watch6 series, starting from Korea. The flagship watches will be updated to the following versions:

• Galaxy Watch6 40mm (BT and Cellular, SM-R930/R935x): CZA1
• Galaxy Watch6 44mm (BT and Cellular, SM-R940/R945x): CZA1
• Galaxy Watch6 Classic 40mm (BT and Cellular, SM-R950/R955x): CZA1
• Galaxy Watch6 Classic 44mm (BT and Cellular, SM-R960/R965x): CZA1

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#Android #GalaxyWatch6 #GalaxyWatch6Classic #news #oneUi #OneUI6Watch #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #smartwatch #Smartwatches #Tech #Technology #update #Watch #Watch6 #Watch6Classic #Wearable

Galaxy Watch6 receives a new January 2026 update!

Samsung has started rolling out a new software update that upgrades the security patch level to January 1st, 2026, to the Galaxy Watch6 series, starting from Korea. The flagship watches will be updated to the following versions:

• Galaxy Watch6 40mm (BT and Cellular, SM-R930/R935x): CZA1
• Galaxy Watch6 44mm (BT and Cellular, SM-R940/R945x): CZA1
• Galaxy Watch6 Classic 40mm (BT and Cellular, SM-R950/R955x): CZA1
• Galaxy Watch6 Classic 44mm (BT and Cellular, SM-R960/R965x): CZA1

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#Android #GalaxyWatch6 #GalaxyWatch6Classic #news #oneUi #OneUI6Watch #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #smartwatch #Smartwatches #Tech #Technology #update #Watch #Watch6 #Watch6Classic #Wearable

Galaxy Watch4 receives the January 2026 update

Samsung has started rolling out a new software update to the Galaxy Watch4 series, starting from Korea, as of today. It brings the January 2026 security patch, along with some stability improvements. The watches will be updated to the following versions:

• Galaxy Watch4 40mm (BT and Cellular, SM-R860/R865x): JYL6 [KOO]
• Galaxy Watch4 44mm (BT and Cellular, SM-R870/R875x): JYL6 [KOO]
• Galaxy Watch4 Classic 40mm (BT and Cellular, SM-R880/R885x): JYL6 [KOO]
• Galaxy Watch4 Classic 44mm (BT and Cellular, SM-R890/R895x): JYL6 [KOO]

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

Galaxy Watch4 receives the January 2026 update

Samsung has started rolling out a new software update to the Galaxy Watch4 series, starting from Korea, as of today. It brings the January 2026 security patch, along with some stability improvements. The watches will be updated to the following versions:

• Galaxy Watch4 40mm (BT and Cellular, SM-R860/R865x): JYL6 [KOO]
• Galaxy Watch4 44mm (BT and Cellular, SM-R870/R875x): JYL6 [KOO]
• Galaxy Watch4 Classic 40mm (BT and Cellular, SM-R880/R885x): JYL6 [KOO]
• Galaxy Watch4 Classic 44mm (BT and Cellular, SM-R890/R895x): JYL6 [KOO]

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#Android #GalaxyWatch4 #GalaxyWatch4 #news #oneUi #OneUI6Watch #Samsung #SamsungGalaxyWatch4 #SamsungGalaxyWatch4 #smartwatch #Smartwatches #Tech #Technology #update #Watch #Watch4 #Watch4 #Wearable

Galaxy Watch4 receives the January 2026 update

Samsung has started rolling out a new software update to the Galaxy Watch4 series, starting from Korea, as of today. It brings the January 2026 security patch, along with some stability improvements. The watches will be updated to the following versions:

• Galaxy Watch4 40mm (BT and Cellular, SM-R860/R865x): JYL6 [KOO]
• Galaxy Watch4 44mm (BT and Cellular, SM-R870/R875x): JYL6 [KOO]
• Galaxy Watch4 Classic 40mm (BT and Cellular, SM-R880/R885x): JYL6 [KOO]
• Galaxy Watch4 Classic 44mm (BT and Cellular, SM-R890/R895x): JYL6 [KOO]

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#Android #GalaxyWatch4 #GalaxyWatch4 #news #oneUi #OneUI6Watch #Samsung #SamsungGalaxyWatch4 #SamsungGalaxyWatch4 #smartwatch #Smartwatches #Tech #Technology #update #Watch #Watch4 #Watch4 #Wearable

Galaxy Watch4 receives the January 2026 update

Samsung has started rolling out a new software update to the Galaxy Watch4 series, starting from Korea, as of today. It brings the January 2026 security patch, along with some stability improvements. The watches will be updated to the following versions:

• Galaxy Watch4 40mm (BT and Cellular, SM-R860/R865x): JYL6 [KOO]
• Galaxy Watch4 44mm (BT and Cellular, SM-R870/R875x): JYL6 [KOO]
• Galaxy Watch4 Classic 40mm (BT and Cellular, SM-R880/R885x): JYL6 [KOO]
• Galaxy Watch4 Classic 44mm (BT and Cellular, SM-R890/R895x): JYL6 [KOO]

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

Galaxy Watch4 receives the January 2026 update

Samsung has started rolling out a new software update to the Galaxy Watch4 series, starting from Korea, as of today. It brings the January 2026 security patch, along with some stability improvements. The watches will be updated to the following versions:

• Galaxy Watch4 40mm (BT and Cellular, SM-R860/R865x): JYL6 [KOO]
• Galaxy Watch4 44mm (BT and Cellular, SM-R870/R875x): JYL6 [KOO]
• Galaxy Watch4 Classic 40mm (BT and Cellular, SM-R880/R885x): JYL6 [KOO]
• Galaxy Watch4 Classic 44mm (BT and Cellular, SM-R890/R895x): JYL6 [KOO]

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#Android #GalaxyWatch4 #GalaxyWatch4 #news #oneUi #OneUI6Watch #Samsung #SamsungGalaxyWatch4 #SamsungGalaxyWatch4 #smartwatch #Smartwatches #Tech #Technology #update #Watch #Watch4 #Watch4 #Wearable

Galaxy Watch4 BT receives a new update with August 2025 security patch!

Samsung has started rolling out a new software update to the Galaxy Watch4 series, starting from Korea, which updates your watch’s security patch to August 2025 and improves some of the features in One UI 6 Watch. This is done prior to One UI 8 Watch. The flagship watches will be updated to the following versions:

• Galaxy Watch4 40mm (BT, SM-R860): IYI1 [KOO]
• Galaxy Watch4 44mm (BT, SM-R870): IYI1 [KOO]
• Galaxy Watch4 Classic 40mm (BT, SM-R880): IYI1 [KOO]
• Galaxy Watch4 Classic 44mm (BT, SM-R890): IYI1 [KOO]

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone, if available, to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

Galaxy Watch4 BT receives a new update with August 2025 security patch!

Samsung has started rolling out a new software update to the Galaxy Watch4 series, starting from Korea, which updates your watch’s security patch to August 2025 and improves some of the features in One UI 6 Watch. This is done prior to One UI 8 Watch. The flagship watches will be updated to the following versions:

• Galaxy Watch4 40mm (BT, SM-R860): IYI1 [KOO]
• Galaxy Watch4 44mm (BT, SM-R870): IYI1 [KOO]
• Galaxy Watch4 Classic 40mm (BT, SM-R880): IYI1 [KOO]
• Galaxy Watch4 Classic 44mm (BT, SM-R890): IYI1 [KOO]

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone, if available, to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#Android #GalaxyWatch4 #news #oneUi #OneUI6Watch #Samsung #SamsungGalaxyWatch4 #smartwatch #Smartwatches #Tech #Technology #update #Watch #Watch4 #Wearable

Galaxy Watch4 BT receives a new update with August 2025 security patch!

Samsung has started rolling out a new software update to the Galaxy Watch4 series, starting from Korea, which updates your watch’s security patch to August 2025 and improves some of the features in One UI 6 Watch. This is done prior to One UI 8 Watch. The flagship watches will be updated to the following versions:

• Galaxy Watch4 40mm (BT, SM-R860): IYI1 [KOO]
• Galaxy Watch4 44mm (BT, SM-R870): IYI1 [KOO]
• Galaxy Watch4 Classic 40mm (BT, SM-R880): IYI1 [KOO]
• Galaxy Watch4 Classic 44mm (BT, SM-R890): IYI1 [KOO]

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone, if available, to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

Galaxy Watch4 BT receives a new update with August 2025 security patch!

Samsung has started rolling out a new software update to the Galaxy Watch4 series, starting from Korea, which updates your watch’s security patch to August 2025 and improves some of the features in One UI 6 Watch. This is done prior to One UI 8 Watch. The flagship watches will be updated to the following versions:

• Galaxy Watch4 40mm (BT, SM-R860): IYI1 [KOO]
• Galaxy Watch4 44mm (BT, SM-R870): IYI1 [KOO]
• Galaxy Watch4 Classic 40mm (BT, SM-R880): IYI1 [KOO]
• Galaxy Watch4 Classic 44mm (BT, SM-R890): IYI1 [KOO]

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone, if available, to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#Android #GalaxyWatch4 #news #oneUi #OneUI6Watch #Samsung #SamsungGalaxyWatch4 #smartwatch #Smartwatches #Tech #Technology #update #Watch #Watch4 #Wearable

Galaxy Watch5 BT receives a new update with August 2025 security patch!

Samsung has started rolling out a new software update to the Galaxy Watch5 series, starting from Korea, which updates your watch’s security patch to August 2025 and improves some of the features in One UI 6 Watch. The flagship watches will be updated to the following versions:

• Galaxy Watch5 40mm (BT, SM-R900): CYJ1 [KOO]
• Galaxy Watch5 44mm (BT, SM-R910): CYJ1 [KOO]
• Galaxy Watch5 Pro (BT, SM-R920): CYJ1 [KOO]

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone, if available, to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

Galaxy Watch5 BT receives a new update with August 2025 security patch!

Samsung has started rolling out a new software update to the Galaxy Watch5 series, starting from Korea, which updates your watch’s security patch to August 2025 and improves some of the features in One UI 6 Watch. The flagship watches will be updated to the following versions:

• Galaxy Watch5 40mm (BT, SM-R900): CYJ1 [KOO]
• Galaxy Watch5 44mm (BT, SM-R910): CYJ1 [KOO]
• Galaxy Watch5 Pro (BT, SM-R920): CYJ1 [KOO]

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone, if available, to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#Android #GalaxyWatch5 #news #oneUi #OneUI6Watch #Samsung #SamsungGalaxyWatch5 #smartwatch #Smartwatches #Tech #Technology #update #Watch #Watch5 #Wearable

Galaxy Watch6, Watch7, and Watch Ultra LTE receive August 2025 security update in India!

Samsung has just released the August 2025 security patch in India for the LTE version of Galaxy Watch6, Watch7, and Watch Ultra (2024 original and 2025 reboot). This patch enhances your smartwatch’s security to make sure that you and your data are kept secure. This aligns with the quarterly cadence of the software update scheduling for five years of security updates and four generations of system updates.

The following firmware information is available:

• SM-L705F: L705FXXU1BYH6 [INS]
• SM-L315F: L315FXXU1AYH1 [INS]
• SM-L305F: L305FXXU1AYH1 [INS]
• SM-R965F: R965FXXS1BYH1 [INS]
• SM-R955F: R955FXXS1BYH1 [INS]
• SM-R945F: R945FXXS1BYH1 [INS]
• SM-R935F: R935FXXS1BYH1 [INS]

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

#Android #Android14 #GalaxyWatch6 #GalaxyWatch6Classic #news #oneUi #OneUI6 #OneUI6Watch #Samsung #SamsungGalaxyWatch6 #SamsungGalaxyWatch6Classic #Tech #Technology #update #Watch6 #Watch6Classic

Samsung Galaxy Watch6 receives the August 2025 update, starting from Korea!

#Samsung #Galaxy #OneUI6Watch #TeamGalaxy #GalaxyAI #TeamSamsung #TechNews #TechUpdates #GalaxyWatch6

https://officialaptivi.wordpress.com/2025/08/27/galaxy-watch6-receives-a-new-august-2025-update/

Samsung Galaxy Watch6 receives the August 2025 update, starting from Korea!

#Samsung #Galaxy #OneUI6Watch #TeamGalaxy #GalaxyAI #TeamSamsung #TechNews #TechUpdates #GalaxyWatch6

https://officialaptivi.wordpress.com/2025/08/27/galaxy-watch6-receives-a-new-august-2025-update/

Galaxy Watch6 receives a new August 2025 update!

Samsung has started rolling out a new software update that is rather massive to the Galaxy Watch6 series, starting from Korea. This happened according to Alfatürk on X. The flagship watches will be updated to the following versions:

• Galaxy Watch6 40mm (BT and Cellular, SM-R930/R935x): BYH1
• Galaxy Watch6 44mm (BT and Cellular, SM-R940/R945x): BYH1
• Galaxy Watch6 Classic 40mm (BT and Cellular, SM-R950/R955x): BYH1
• Galaxy Watch6 Classic 44mm (BT and Cellular, SM-R960/R965x): BYH1

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

Galaxy Watch6 LTE will be updated in Canada soon!

After Samsung rolled out the stability update to the Galaxy Watch7 series, Samsung has started rolling out a new software update that is rather massive to the Galaxy Watch6 series in the USA, Canada, India, Saudi Arabia, the UAE, and more, starting from the Bluetooth variant. The cellular versions might take longer to receive the update, though.

According to our tests on our BT version of the Galaxy Watch6 that got the update, the battery life has significantly improved! Not only will your battery last longer on usage, but suspend will no longer consume too much battery.

The LTE version of the flagship watches will be updated to the following versions in Canada on May 21st:

• Galaxy Watch6 40mm (Cellular, SM-R935F): BYD1
• Galaxy Watch6 44mm (Cellular, SM-R945F): BYD1
• Galaxy Watch6 Classic 40mm (Cellular, SM-R955F): BYD1
• Galaxy Watch6 Classic 44mm (Cellular, SM-R965F): BYD1

You can update your smartwatch once it gets released, but if you still didn’t receive any update, you’ll have to wait for a few days. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

Galaxy Watch4 receives a new update globally!

After Samsung rolled out the stability update to the Galaxy Watch7, Watch6, and Watch5 series, Samsung has started rolling out a new software update that is rather massive to the Galaxy Watch4 series in the USA, Canada, India, and more. The cellular versions might take longer to receive the update, though. The flagship watches will be updated to the following versions:

• Galaxy Watch4 40mm (BT and Cellular, SM-R860/R865x): IYCD
• Galaxy Watch4 44mm (BT and Cellular, SM-R870/R875x): IYCD
• Galaxy Watch4 Classic 40mm (BT and Cellular, SM-R880/R885x): IYCD
• Galaxy Watch4 Classic 44mm (BT and Cellular, SM-R890/R895x): IYCD

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

Galaxy Watch5 receives a new update globally!

After Samsung rolled out the stability update to the Galaxy Watch7 and the Watch6 series, Samsung has started rolling out a new software update that is rather massive to the Galaxy Watch5 series in the USA, Canada, India, and more. The cellular versions might take longer to receive the update, though. The flagship watches will be updated to the following versions:

• Galaxy Watch5 40mm (BT and Cellular, SM-R900/R905x): CYCD
• Galaxy Watch5 44mm (BT and Cellular, SM-R910/R915x): CYCD
• Galaxy Watch5 Pro 45mm (BT and Cellular, SM-R920/R925x): CYCD

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

Galaxy Watch4 receives a new update

After Samsung rolled out the stability update to the Galaxy Watch7, Watch6, and Watch5 series, Samsung has started rolling out a new software update that is rather massive to the Galaxy Watch4 series, starting from Korea, on April 24th. The flagship watches will be updated to the following versions:

• Galaxy Watch4 40mm (BT and Cellular, SM-R860/R865x): IYCD
• Galaxy Watch4 44mm (BT and Cellular, SM-R870/R875x): IYCD
• Galaxy Watch4 Classic 40mm (BT and Cellular, SM-R880/R885x): IYCD
• Galaxy Watch4 Classic 44mm (BT and Cellular, SM-R890/R895x): IYCD

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

Galaxy Watch5 receives a new update

After Samsung rolled out the stability update to the Galaxy Watch7 and the Watch6 series, Samsung has started rolling out a new software update that is rather massive to the Galaxy Watch5 series, starting from Korea, on April 24th. The flagship watches will be updated to the following versions:

• Galaxy Watch5 40mm (BT and Cellular, SM-R900/R905x): CYCD
• Galaxy Watch5 44mm (BT and Cellular, SM-R910/R915x): CYCD
• Galaxy Watch5 Pro 45mm (BT and Cellular, SM-R920/R925x): CYCD

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

Galaxy Watch6 receives a new update

After Samsung rolled out the stability update to the Galaxy Watch7 series, Samsung has started rolling out a new software update that is rather massive to the Galaxy Watch6 series, starting from Korea. The flagship watches will be updated to the following versions:

• Galaxy Watch6 40mm (BT and Cellular, SM-R930/R935x): BYD1
• Galaxy Watch6 44mm (BT and Cellular, SM-R940/R945x): BYD1
• Galaxy Watch6 Classic 40mm (BT and Cellular, SM-R950/R955x): BYD1
• Galaxy Watch6 Classic 44mm (BT and Cellular, SM-R960/R965x): BYD1

You can now update your smartwatch, but if you still didn’t receive any update, you’ll have to wait for a few days as this rollout is a gradual rollout that starts from Korea. You can periodically check for updates to see if this update has reached your device. We recommend that you update your watch manager in your phone to ensure compatibility with the latest software.

To update your watch, follow these steps:

• With your phone
  1. Open Galaxy Wearable
  2. Select your watch
  3. Open Watch settings
  4. Navigate to Software Update
  5. Tap Download and Install
  6. Wait until the update shows up, then press Download
  7. Wait until the update gets downloaded and copied to your watch, then press Install
• With your watch
  1. Open Settings
  2. Navigate to Software update
  3. Tap Download and Install
  4. Wait until the update shows up, then press Download
  5. Wait until it gets downloaded to your watch, then press Install

In an event that something went wrong with copying the update, disconnect your phone from your watch by turning Bluetooth off or by disconnecting it through Galaxy Wearable, then try again from your watch. Make sure to turn Wi-Fi on in your watch to download the update faster.

Make sure that both your phone and your watch are charged before performing the update, and that your internet connection is stable. Never interrupt the update process, or there could be problems later. The update process may take a few minutes to finish, and if it appears to be stuck, just wait for more minutes.

One UI 6 Watch lands to more Galaxy Watch4 LTE units! Congratulations!

#Samsung #Galaxy #OneUI6Watch #GalaxyWatch #TeamGalaxy #TeamSamsung #TechNews #TechUpdates

https://officialaptivi.wordpress.com/2025/02/24/some-galaxy-watch4-lte-units-get-one-ui-6-watch/

One UI 6 Watch lands to more Galaxy Watch4 LTE units! Congratulations!

#Samsung #Galaxy #OneUI6Watch #GalaxyWatch #TeamGalaxy #TeamSamsung #TechNews #TechUpdates

https://officialaptivi.wordpress.com/2025/02/24/some-galaxy-watch4-lte-units-get-one-ui-6-watch/

Some Galaxy Watch4 LTE units get One UI 6 Watch

Three months ago, Samsung have released the One UI 6 Watch for all the eligible smartwatches that include Galaxy Watch6, Watch5, and Watch4 in both the Bluetooth and the LTE variants. The rollout was very fast if you take a look at the surface level, with the rollout starting from the Galaxy Watch6 series.

After a long wait for users that didn’t get the One UI 6 Watch system for their Galaxy Watch4 LTE, we have finally spotted Samsung releasing this version of One UI for more Galaxy Watch4 LTE units in more countries, such as India.

To update your watch, open Galaxy Wearable on your phone and navigate to Watch settings > Watch software update > Download and Install. If you saw the One UI 6 update, you can now download it to your watch. However, if you still can’t get this update, wait for the update in the coming days or weeks, depending on your smartwatch and your country.

Some Galaxy Watch4 LTE units get One UI 6 Watch

Three months ago, Samsung have released the One UI 6 Watch for all the eligible smartwatches that include Galaxy Watch6, Watch5, and Watch4 in both the Bluetooth and the LTE variants. The rollout was very fast if you take a look at the surface level, with the rollout starting from the Galaxy Watch6 series.

After a long wait for users that didn’t get the One UI 6 Watch system for their Galaxy Watch4 LTE, we have finally spotted Samsung releasing this version of One UI for more Galaxy Watch4 LTE units in more countries, such as India.

To update your watch, open Galaxy Wearable on your phone and navigate to Watch settings > Watch software update > Download and Install. If you saw the One UI 6 update, you can now download it to your watch. However, if you still can’t get this update, wait for the update in the coming days or weeks, depending on your smartwatch and your country.

Did your Galaxy Watch4 LTE receive One UI 6 Watch? Some did, and some didn't.

#Samsung #Galaxy #Watch4 #OneUI #OneUI6Watch #GalaxyWatch #TeamGalaxy #TeamSamsung #TechNews #TechUpdates

https://officialaptivi.wordpress.com/2025/02/24/some-galaxy-watch4-lte-units-still-havent-received-one-ui-6-watch/

Did your Galaxy Watch4 LTE receive One UI 6 Watch? Some did, and some didn't.

#Samsung #Galaxy #Watch4 #OneUI #OneUI6Watch #GalaxyWatch #TeamGalaxy #TeamSamsung #TechNews #TechUpdates

https://officialaptivi.wordpress.com/2025/02/24/some-galaxy-watch4-lte-units-still-havent-received-one-ui-6-watch/

Some Galaxy Watch4 LTE units still haven’t received One UI 6 Watch

Three months ago, Samsung have released the One UI 6 Watch for all the eligible smartwatches that include Galaxy Watch6, Watch5, and Watch4 in both the Bluetooth and the LTE variants. The rollout was very fast if you take a look at the surface level, with the rollout starting from the Galaxy Watch6 series. Going deeper, we’ve noticed that the Galaxy Watch4 LTE users in different regions, most notably the Indian regions, still haven’t received the One UI 6 Watch update as of today.

In Australia, One UI 6 Watch for LTE variants for the Galaxy Watch4 smartwatch has been released back on January 14th, 2025, while the Bluetooth variant got it a month earlier on December 10th, 2024. All LTE smartwatches are supposed to receive the IXK1 update by now, but several regions, such as India, have not received the update yet and are still stuck on the HXB7 update that runs One UI 5 Watch which added a feature that allows you to see your workout status on Samsung televisions released on 2024.

In the coming weeks, we hope that the update will be released for such variants to finalize the rollout of One UI 6 Watch for the Galaxy Watch4 series released back on 2021. This is unusual, since it reminded us of some flagship devices that didn’t receive the One UI 6.0 update, such as the Galaxy Tab S8 and S9, until last February.

To update your watch, open Galaxy Wearable on your phone and navigate to Watch settings > Watch software update > Download and Install. If you saw the One UI 6 update, you can now download it to your watch. However, if you still can’t get this update, wait for the update in the coming days or weeks, depending on your smartwatch and your country.

https://audiomack.com/aptivi/song/some-galaxy-watch4-lte-units-still-havent-received-one-ui-6-watch

Some Galaxy Watch4 LTE units still haven’t received One UI 6 Watch

Three months ago, Samsung have released the One UI 6 Watch for all the eligible smartwatches that include Galaxy Watch6, Watch5, and Watch4 in both the Bluetooth and the LTE variants. The rollout was very fast if you take a look at the surface level, with the rollout starting from the Galaxy Watch6 series. Going deeper, we’ve noticed that the Galaxy Watch4 LTE users in different regions, most notably the Indian regions, still haven’t received the One UI 6 Watch update as of today.

In Australia, One UI 6 Watch for LTE variants for the Galaxy Watch4 smartwatch has been released back on January 14th, 2025, while the Bluetooth variant got it a month earlier on December 10th, 2024. All LTE smartwatches are supposed to receive the IXK1 update by now, but several regions, such as India, have not received the update yet and are still stuck on the HXB7 update that runs One UI 5 Watch which added a feature that allows you to see your workout status on Samsung televisions released on 2024.

In the coming weeks, we hope that the update will be released for such variants to finalize the rollout of One UI 6 Watch for the Galaxy Watch4 series released back on 2021. This is unusual, since it reminded us of some flagship devices that didn’t receive the One UI 6.0 update, such as the Galaxy Tab S8 and S9, until last February.

To update your watch, open Galaxy Wearable on your phone and navigate to Watch settings > Watch software update > Download and Install. If you saw the One UI 6 update, you can now download it to your watch. However, if you still can’t get this update, wait for the update in the coming days or weeks, depending on your smartwatch and your country.

https://audiomack.com/aptivi/song/some-galaxy-watch4-lte-units-still-havent-received-one-ui-6-watch

Samsung updates the Galaxy Watch6 series after One UI 6 Watch update

After the One UI 6 Watch update, Samsung has released another update for all the Galaxy Watch6 series devices that improves system stability. The following information is available (the cellular versions also got the update, but not listed here):

• SM-R930: R930XXU1BXL2
• SM-R940: R940XXU1BXL2
• SM-R950: R950XXU1BXL2
• SM-R960: R960XXU1BXL2

This update doesn’t upgrade your Wear OS 5 security patch, therefore it stays on the October 1st patch of the last year, the same patch used when releasing the One UI 6 Watch software.

To install this software update, you can either do it from the watch directly (as long as remote Wi-Fi connection is disabled and the watch not paired to your phone) or through your phone:

• Updating from your watch
  1. Turn on your Wi-Fi if you haven’t already.
  2. Go to Settings > Software update > Download and install.
  3. You’ll be notified about the update. Press Download if it didn’t begin downloading automatically.
  4. Let the download finish, then press Install Now.
• Updating from your phone
  1. Make sure that you have both Wi-Fi and Bluetooth turned on in both your watch and your phone, connected to each other.
  2. On your phone, open Wearable.
  3. Select your watch (in case you have multiple devices connected).
  4. Go to Watch settings > Software update > Download and install.
  5. You’ll be notified about the update. Press Download if it didn’t begin downloading automatically.
  6. Let the download and the copying finish, then press Install Now.

Make sure that you either have full charge on your watch or have put your watch to the charger before starting the update. You can let the update install automatically overnight when your watch is on the charger at least 30%. Don’t interrupt the update process in any way during the installation phase. It’s normal for the watch to appear “stuck” at the Samsung logo for approximately 5 minutes during the install process. Interruption of the update may cause the watch to malfunction.

Samsung releases Wear OS 5 for the Galaxy Watch 4, but not all users get it – Here’s why #featured #galaxywatch4 #galaxywatch4classic #googlewearos #news #oneui6watch #samsung #samsunggalaxywatch4 #samsunggalaxywatch4classic #tech #wearables #wearos #wearos5

https://soyacincau.com/2024/11/29/samsung-releases-wear-os-5-for-some-galaxy-watch-4-users/

Samsung releases Wear OS 5 for the Galaxy Watch 4, but not all users get it – Here’s why #featured #galaxywatch4 #galaxywatch4classic #googlewearos #news #oneui6watch #samsung #samsunggalaxywatch4 #samsunggalaxywatch4classic #tech #wearables #wearos #wearos5

https://soyacincau.com/2024/11/29/samsung-releases-wear-os-5-for-some-galaxy-watch-4-users/

Samsung releases Wear OS 5 for the Galaxy Watch 4, but not all users get it – Here’s why #featured #galaxywatch4 #galaxywatch4classic #googlewearos #news #oneui6watch #samsung #samsunggalaxywatch4 #samsunggalaxywatch4classic #tech #wearables #wearos #wearos5

https://soyacincau.com/2024/11/29/samsung-releases-wear-os-5-for-some-galaxy-watch-4-users/

Galaxy Watch5 Manager gets an update

As Samsung is getting ready to release the One UI 6 Watch update, the Galaxy Watch5 Manager also gets an update. Apparently, users in differing countries have reported that they’ve received the Galaxy Watch5 Manager update for the Galaxy Watch5 smartwatch.

This version of the Galaxy Watch5 Manager provides a new GUI and three One UI 6 Watch watchfaces that consist of the following:

• Spatial Number: numbers constructed from 3D shapes give a sense of depth over a background that changes color as the second hand moves.
• Simple Digital: a clean, simple design that keeps you focused on the time. The seconds are displayed in a circle around the minutes.
• Ultra Info Band: This watch face puts your health data front and center, with more advanced complications than ever before. You can include up to 7 complications for the ultimate in info at a glance.

Galaxy Watch5 Manager gets an update

As Samsung is getting ready to release the One UI 6 Watch update, the Galaxy Watch5 Manager also gets an update. Apparently, users in differing countries have reported that they’ve received the Galaxy Watch5 Manager update for the Galaxy Watch5 smartwatch.

This version of the Galaxy Watch5 Manager provides a new GUI and three One UI 6 Watch watchfaces that consist of the following:

• Spatial Number: numbers constructed from 3D shapes give a sense of depth over a background that changes color as the second hand moves.
• Simple Digital: a clean, simple design that keeps you focused on the time. The seconds are displayed in a circle around the minutes.
• Ultra Info Band: This watch face puts your health data front and center, with more advanced complications than ever before. You can include up to 7 complications for the ultimate in info at a glance.

Galaxy Watch6 Manager update rolls out + Our Review

As Samsung is getting ready to release the One UI 6 Watch update, the Galaxy Watch6 Manager also gets an update. Previously, the Reddit users have reported that they’ve received the Galaxy Watch6 Manager update for the Galaxy Watch6 smartwatch, which is expected to get the new system update on November 25th, 2024 in Canada, which is seven days from now.

It looks like that Samsung continues the rollout of the new Watch6 Manager update. It actually reached our device, so we’ve decided to download and install the update manually through the About page. The download, which is 154 MB, went like this:

Afterwards, we are greeted with the new watch manager GUI, which aligns with our reports and the beta versions of the watch manager, along with the watch face screen giving you a banner that tells you about the One UI 6 Watch watchfaces:

So, we’ve downloaded all the featured watch faces:

• Spatial Number (Numbers, 22.67 MB): numbers constructed from 3D shapes give a sense of depth over a background that changes color as the second hand moves.
• Simple Digital (Simple, 8.62 MB): a clean, simple design that keeps you focused on the time. The seconds are displayed in a circle around the minutes.
• Ultra Info Band (Informative, 12.99 MB): This watch face puts your health data front and center, with more advanced complications than ever before. You can include up to 7 complications for the ultimate in info at a glance.

Now, let’s see a screenshot for each new watch face introduced with the manager update.

The watch manager in our case has been updated to the November 8th version, which is 2.2.13.24110851. We’ve downloaded the Galaxy Wearable app from Google Play Store.

Galaxy Watch6 Manager update rolls out + Our Review

As Samsung is getting ready to release the One UI 6 Watch update, the Galaxy Watch6 Manager also gets an update. Previously, the Reddit users have reported that they’ve received the Galaxy Watch6 Manager update for the Galaxy Watch6 smartwatch, which is expected to get the new system update on November 25th, 2024 in Canada, which is seven days from now.

It looks like that Samsung continues the rollout of the new Watch6 Manager update. It actually reached our device, so we’ve decided to download and install the update manually through the About page. The download, which is 154 MB, went like this:

Afterwards, we are greeted with the new watch manager GUI, which aligns with our reports and the beta versions of the watch manager, along with the watch face screen giving you a banner that tells you about the One UI 6 Watch watchfaces:

So, we’ve downloaded all the featured watch faces:

• Spatial Number (Numbers, 22.67 MB): numbers constructed from 3D shapes give a sense of depth over a background that changes color as the second hand moves.
• Simple Digital (Simple, 8.62 MB): a clean, simple design that keeps you focused on the time. The seconds are displayed in a circle around the minutes.
• Ultra Info Band (Informative, 12.99 MB): This watch face puts your health data front and center, with more advanced complications than ever before. You can include up to 7 complications for the ultimate in info at a glance.

Now, let’s see a screenshot for each new watch face introduced with the manager update.

The watch manager in our case has been updated to the November 8th version, which is 2.2.13.24110851. We’ve downloaded the Galaxy Wearable app from Google Play Store.

Galaxy Watch6 Manager gets an update

UPDATE: The Watch6 manager update continues its rollout to more countries and regions! Find more here!

As Samsung is getting ready to release the One UI 6 Watch update, the Galaxy Watch6 Manager also gets an update. Apparently, the Reddit users have reported that they’ve received the Galaxy Watch6 Manager update for the Galaxy Watch6 smartwatch, which is expected to get the new system update on November 25th, 2024, which is ten days from now.

• Post one
• Post two
• Post three

However, the Watch5 Manager hasn’t been updated yet, which aligns with how both the Watch5 and the Watch4 got the One UI 6 Watch Beta 8 update that was released yesterday, while Samsung also reiterated in the USA forums about how the Beta for the Watch6 has been concluded.

Going back as far as September 25th, Samsung has released a new version of the Galaxy Watch4 Manager that provided the One UI 6 Watch watchfaces to all the Galaxy Watch4 units that weren’t running the beta version of One UI 6 Watch. However, we’d like to reiterate that Sammy Fans and others might have misled users into thinking that the Galaxy Watch5 and Watch6 users could download the One UI 6 Watch watchfaces.

This version of the Galaxy Watch6 Manager, which is 2.2.13.24101651, provides a new GUI and three One UI 6 Watch watchfaces that consist of the following:

• Spatial Number: numbers constructed from 3D shapes give a sense of depth over a background that changes color as the second hand moves.
• Simple Digital: a clean, simple design that keeps you focused on the time. The seconds are displayed in a circle around the minutes.
• Ultra Info Band: This watch face puts your health data front and center, with more advanced complications than ever before. You can include up to 7 complications for the ultimate in info at a glance.

This version of the watch manager is built on October 16th, 2024, which is two days before the eighth beta of the new operating system for the Watch6, which should be unveiled 10 days from now.

However, the new version can’t be currently downloaded from Google Play Store, because this version is currently rolling out to several countries soon. Those who have downloaded the Galaxy Watch6 plugin from Galaxy Store should expect a new update.

Galaxy Watch6 Manager gets an update

UPDATE: The Watch6 manager update continues its rollout to more countries and regions! Find more here!

As Samsung is getting ready to release the One UI 6 Watch update, the Galaxy Watch6 Manager also gets an update. Apparently, the Reddit users have reported that they’ve received the Galaxy Watch6 Manager update for the Galaxy Watch6 smartwatch, which is expected to get the new system update on November 25th, 2024, which is ten days from now.

• Post one
• Post two
• Post three

However, the Watch5 Manager hasn’t been updated yet, which aligns with how both the Watch5 and the Watch4 got the One UI 6 Watch Beta 8 update that was released yesterday, while Samsung also reiterated in the USA forums about how the Beta for the Watch6 has been concluded.

Going back as far as September 25th, Samsung has released a new version of the Galaxy Watch4 Manager that provided the One UI 6 Watch watchfaces to all the Galaxy Watch4 units that weren’t running the beta version of One UI 6 Watch. However, we’d like to reiterate that Sammy Fans and others might have misled users into thinking that the Galaxy Watch5 and Watch6 users could download the One UI 6 Watch watchfaces.

This version of the Galaxy Watch6 Manager, which is 2.2.13.24101651, provides a new GUI and three One UI 6 Watch watchfaces that consist of the following:

• Spatial Number: numbers constructed from 3D shapes give a sense of depth over a background that changes color as the second hand moves.
• Simple Digital: a clean, simple design that keeps you focused on the time. The seconds are displayed in a circle around the minutes.
• Ultra Info Band: This watch face puts your health data front and center, with more advanced complications than ever before. You can include up to 7 complications for the ultimate in info at a glance.

This version of the watch manager is built on October 16th, 2024, which is two days before the eighth beta of the new operating system for the Watch6, which should be unveiled 10 days from now.

However, the new version can’t be currently downloaded from Google Play Store, because this version is currently rolling out to several countries soon. Those who have downloaded the Galaxy Watch6 plugin from Galaxy Store should expect a new update.

Endlich erhalten Besitzer einer #Samsung #GalaxyWatch 6, 5, und 4 in den nächsten Wochen das große Update auf #OneUI6Watch, das auf #WearOS5 basiert. Die #Smartwatch-Modelle bekommen viele neue Funktionen. https://winfuture.de/news,146277.html?utm_source=Mastodon&utm_medium=ManualStatus&utm_campaign=SocialMedia

Endlich erhalten Besitzer einer #Samsung #GalaxyWatch 6, 5, und 4 in den nächsten Wochen das große Update auf #OneUI6Watch, das auf #WearOS5 basiert. Die #Smartwatch-Modelle bekommen viele neue Funktionen. https://winfuture.de/news,146277.html?utm_source=Mastodon&utm_medium=ManualStatus&utm_campaign=SocialMedia

Endlich erhalten Besitzer einer #Samsung #GalaxyWatch 6, 5, und 4 in den nächsten Wochen das große Update auf #OneUI6Watch, das auf #WearOS5 basiert. Die #Smartwatch-Modelle bekommen viele neue Funktionen. https://winfuture.de/news,146277.html?utm_source=Mastodon&utm_medium=ManualStatus&utm_campaign=SocialMedia

Endlich erhalten Besitzer einer #Samsung #GalaxyWatch 6, 5, und 4 in den nächsten Wochen das große Update auf #OneUI6Watch, das auf #WearOS5 basiert. Die #Smartwatch-Modelle bekommen viele neue Funktionen. https://winfuture.de/news,146277.html?utm_source=Mastodon&utm_medium=ManualStatus&utm_campaign=SocialMedia

Endlich erhalten Besitzer einer #Samsung #GalaxyWatch 6, 5, und 4 in den nächsten Wochen das große Update auf #OneUI6Watch, das auf #WearOS5 basiert. Die #Smartwatch-Modelle bekommen viele neue Funktionen. https://winfuture.de/news,146277.html?utm_source=Mastodon&utm_medium=ManualStatus&utm_campaign=SocialMedia

#Samsung #Galaxy #Watch4 gets #Watch7 watch faces! Galaxy #Watch5 and #Watch6 users will have to wait.

#TeamGalaxy #OneUI6Watch

https://officialaptivi.wordpress.com/2024/10/04/galaxy-watch7-ultra-watch-faces-rolled-out-to-galaxy-watch4-only/