#one-ui-watch — Public Fediverse posts

Samsung One UI Update Schedule: September 2026

Samsung has been one of the best in the industry at keeping its high-end devices up-to-date over the…
#EuropeSays #Korea #KR #Samsung #OneUI #OneUI8 #OneUI9 #OneUIWatch #SamsungGroup #update
https://www.europesays.com/korea/162661/

Samsung One UI Update Schedule: September 2026

Samsung has been one of the best in the industry at keeping its high-end devices up-to-date over the…
#EuropeSays #Korea #KR #Samsung #OneUI #OneUI8 #OneUI9 #OneUIWatch #SamsungGroup #update
https://www.europesays.com/korea/147601/

One UI 9 Watch Beta Program for the Galaxy Watch6 is now open!

Earlier, Samsung opened the One UI 9.0 Watch Beta Program for the Galaxy Watch7 for users in the US and in Korea to try out the new One UI Watch version, which was already released to the Galaxy Watch9 and Watch Ultra2 revealed this year.

While Samsung was working on One UI 9 Watch for the Galaxy Watch6 series, they opened the beta program. Starting from today, the Galaxy Watch6 series has officially started its beta program for One UI 9.0 according to Alfatürk.

The following firmware builds may have been selected:

• SM-R960: R960XXU2ZZI1 [KOO]
• SM-R950: R950XXU2ZZI1 [KOO]
• SM-R940: R940XXU2ZZI1 [KOO]
• SM-R930: R930XXU2ZZI1 [KOO]

Samsung has opened the beta program, and you can join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea only, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page. In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
   • If you’re using the Galaxy Watch in the USA, make sure that you are on the active plan with T-Mobile.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 9 Watch6 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 9 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

One UI 9 Watch Beta Program for the Galaxy Watch6 is now open!

Earlier, Samsung opened the One UI 9.0 Watch Beta Program for the Galaxy Watch7 for users in the US and in Korea to try out the new One UI Watch version, which was already released to the Galaxy Watch9 and Watch Ultra2 revealed this year.

While Samsung was working on One UI 9 Watch for the Galaxy Watch6 series, they opened the beta program. Starting from today, the Galaxy Watch6 series has officially started its beta program for One UI 9.0 according to Alfatürk.

The following firmware builds may have been selected:

• SM-R960: R960XXU2ZZI1 [KOO]
• SM-R950: R950XXU2ZZI1 [KOO]
• SM-R940: R940XXU2ZZI1 [KOO]
• SM-R930: R930XXU2ZZI1 [KOO]

Samsung has opened the beta program, and you can join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea only, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page. In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
   • If you’re using the Galaxy Watch in the USA, make sure that you are on the active plan with T-Mobile.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 9 Watch6 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 9 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

One UI 9 Watch Beta Program for the Galaxy Watch6 is now open!

Earlier, Samsung opened the One UI 9.0 Watch Beta Program for the Galaxy Watch7 for users in the US and in Korea to try out the new One UI Watch version, which was already released to the Galaxy Watch9 and Watch Ultra2 revealed this year.

While Samsung was working on One UI 9 Watch for the Galaxy Watch6 series, they opened the beta program. Starting from today, the Galaxy Watch6 series has officially started its beta program for One UI 9.0 according to Alfatürk.

The following firmware builds may have been selected:

• SM-R960: R960XXU2ZZI1 [KOO]
• SM-R950: R950XXU2ZZI1 [KOO]
• SM-R940: R940XXU2ZZI1 [KOO]
• SM-R930: R930XXU2ZZI1 [KOO]

Samsung has opened the beta program, and you can join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea only, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page. In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
   • If you’re using the Galaxy Watch in the USA, make sure that you are on the active plan with T-Mobile.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 9 Watch6 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 9 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

One UI 9 Watch Beta Program for the Galaxy Watch6 is now open!

Earlier, Samsung opened the One UI 9.0 Watch Beta Program for the Galaxy Watch7 for users in the US and in Korea to try out the new One UI Watch version, which was already released to the Galaxy Watch9 and Watch Ultra2 revealed this year.

While Samsung was working on One UI 9 Watch for the Galaxy Watch6 series, they opened the beta program. Starting from today, the Galaxy Watch6 series has officially started its beta program for One UI 9.0 according to Alfatürk.

The following firmware builds may have been selected:

• SM-R960: R960XXU2ZZI1 [KOO]
• SM-R950: R950XXU2ZZI1 [KOO]
• SM-R940: R940XXU2ZZI1 [KOO]
• SM-R930: R930XXU2ZZI1 [KOO]

Samsung has opened the beta program, and you can join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea only, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page. In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
   • If you’re using the Galaxy Watch in the USA, make sure that you are on the active plan with T-Mobile.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 9 Watch6 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 9 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

One UI 9 Watch Beta Program for the Galaxy Watch6 is now open!

Earlier, Samsung opened the One UI 9.0 Watch Beta Program for the Galaxy Watch7 for users in the US and in Korea to try out the new One UI Watch version, which was already released to the Galaxy Watch9 and Watch Ultra2 revealed this year.

While Samsung was working on One UI 9 Watch for the Galaxy Watch6 series, they opened the beta program. Starting from today, the Galaxy Watch6 series has officially started its beta program for One UI 9.0 according to Alfatürk.

The following firmware builds may have been selected:

• SM-R960: R960XXU2ZZI1 [KOO]
• SM-R950: R950XXU2ZZI1 [KOO]
• SM-R940: R940XXU2ZZI1 [KOO]
• SM-R930: R930XXU2ZZI1 [KOO]

Samsung has opened the beta program, and you can join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea only, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page. In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
   • If you’re using the Galaxy Watch in the USA, make sure that you are on the active plan with T-Mobile.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 9 Watch6 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 9 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

One UI 9 Watch Beta is coming soon for the Galaxy Watch6

The Galaxy Watch6 series was released in 2023 with One UI 5 Watch as the default software, based on Wear OS 4. This wearable series provides you with new features.

While Samsung was working on One UI 9 Watch for the Galaxy Watch6 series which has entered testing, new builds for the Galaxy Watch6 have been spotted, which suggest that One UI 9 Watch Beta is going to start in the next few weeks.

According to the testing servers in Korea, the Galaxy Watch6 series is getting ready for the next stage of testing. Alfatürk has spotted the first internal beta build being spotted for this smartwatch series.

The following firmware builds have been spotted:

• SM-R960: R960XXU2ZZI1 [KOO]
• SM-R950: R950XXU2ZZI1 [KOO]
• SM-R940: R940XXU2ZZI1 [KOO]
• SM-R930: R930XXU2ZZI1 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch Beta is coming soon for the Galaxy Watch6

The Galaxy Watch6 series was released in 2023 with One UI 5 Watch as the default software, based on Wear OS 4. This wearable series provides you with new features.

While Samsung was working on One UI 9 Watch for the Galaxy Watch6 series which has entered testing, new builds for the Galaxy Watch6 have been spotted, which suggest that One UI 9 Watch Beta is going to start in the next few weeks.

According to the testing servers in Korea, the Galaxy Watch6 series is getting ready for the next stage of testing. Alfatürk has spotted the first internal beta build being spotted for this smartwatch series.

The following firmware builds have been spotted:

• SM-R960: R960XXU2ZZI1 [KOO]
• SM-R950: R950XXU2ZZI1 [KOO]
• SM-R940: R940XXU2ZZI1 [KOO]
• SM-R930: R930XXU2ZZI1 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch Beta is coming soon for the Galaxy Watch6

The Galaxy Watch6 series was released in 2023 with One UI 5 Watch as the default software, based on Wear OS 4. This wearable series provides you with new features.

While Samsung was working on One UI 9 Watch for the Galaxy Watch6 series which has entered testing, new builds for the Galaxy Watch6 have been spotted, which suggest that One UI 9 Watch Beta is going to start in the next few weeks.

According to the testing servers in Korea, the Galaxy Watch6 series is getting ready for the next stage of testing. Alfatürk has spotted the first internal beta build being spotted for this smartwatch series.

The following firmware builds have been spotted:

• SM-R960: R960XXU2ZZI1 [KOO]
• SM-R950: R950XXU2ZZI1 [KOO]
• SM-R940: R940XXU2ZZI1 [KOO]
• SM-R930: R930XXU2ZZI1 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch Beta is coming soon for the Galaxy Watch6

The Galaxy Watch6 series was released in 2023 with One UI 5 Watch as the default software, based on Wear OS 4. This wearable series provides you with new features.

While Samsung was working on One UI 9 Watch for the Galaxy Watch6 series which has entered testing, new builds for the Galaxy Watch6 have been spotted, which suggest that One UI 9 Watch Beta is going to start in the next few weeks.

According to the testing servers in Korea, the Galaxy Watch6 series is getting ready for the next stage of testing. Alfatürk has spotted the first internal beta build being spotted for this smartwatch series.

The following firmware builds have been spotted:

• SM-R960: R960XXU2ZZI1 [KOO]
• SM-R950: R950XXU2ZZI1 [KOO]
• SM-R940: R940XXU2ZZI1 [KOO]
• SM-R930: R930XXU2ZZI1 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch Beta is coming soon for the Galaxy Watch6

The Galaxy Watch6 series was released in 2023 with One UI 5 Watch as the default software, based on Wear OS 4. This wearable series provides you with new features.

While Samsung was working on One UI 9 Watch for the Galaxy Watch6 series which has entered testing, new builds for the Galaxy Watch6 have been spotted, which suggest that One UI 9 Watch Beta is going to start in the next few weeks.

According to the testing servers in Korea, the Galaxy Watch6 series is getting ready for the next stage of testing. Alfatürk has spotted the first internal beta build being spotted for this smartwatch series.

The following firmware builds have been spotted:

• SM-R960: R960XXU2ZZI1 [KOO]
• SM-R950: R950XXU2ZZI1 [KOO]
• SM-R940: R940XXU2ZZI1 [KOO]
• SM-R930: R930XXU2ZZI1 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch Beta Program for the Galaxy Watch7 is now open!

Earlier, Samsung opened the One UI 9.0 Watch Beta Program for the Galaxy Watch8 for users in the US and in Korea to try out the new One UI Watch version, which was already released to the Galaxy Watch9 and Watch Ultra2 revealed this year.

While Samsung was working on One UI 9 Watch for the Galaxy Watch7 series, they opened the beta program. Starting from today, the Galaxy Watch8 series has officially started its beta program for One UI 9.0 according to a report made by Android Sage.

The following firmware builds may have been selected:

• SM-L310: L310XXU2ZZH3 [KOO]
• SM-L300: L300XXU2ZZH3 [KOO]

Samsung has opened the beta program, and you can join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea only, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page. In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
   • If you’re using the Galaxy Watch in the USA, make sure that you are on the active plan with T-Mobile.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 9 Watch7 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 9 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

One UI 9 Watch Beta Program for the Galaxy Watch7 is now open!

Earlier, Samsung opened the One UI 9.0 Watch Beta Program for the Galaxy Watch8 for users in the US and in Korea to try out the new One UI Watch version, which was already released to the Galaxy Watch9 and Watch Ultra2 revealed this year.

While Samsung was working on One UI 9 Watch for the Galaxy Watch7 series, they opened the beta program. Starting from today, the Galaxy Watch8 series has officially started its beta program for One UI 9.0 according to a report made by Android Sage.

The following firmware builds may have been selected:

• SM-L310: L310XXU2ZZH3 [KOO]
• SM-L300: L300XXU2ZZH3 [KOO]

Samsung has opened the beta program, and you can join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea only, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page. In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
   • If you’re using the Galaxy Watch in the USA, make sure that you are on the active plan with T-Mobile.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 9 Watch7 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 9 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

One UI 9 Watch Beta Program for the Galaxy Watch7 is now open!

Earlier, Samsung opened the One UI 9.0 Watch Beta Program for the Galaxy Watch8 for users in the US and in Korea to try out the new One UI Watch version, which was already released to the Galaxy Watch9 and Watch Ultra2 revealed this year.

While Samsung was working on One UI 9 Watch for the Galaxy Watch7 series, they opened the beta program. Starting from today, the Galaxy Watch8 series has officially started its beta program for One UI 9.0 according to a report made by Android Sage.

The following firmware builds may have been selected:

• SM-L310: L310XXU2ZZH3 [KOO]
• SM-L300: L300XXU2ZZH3 [KOO]

Samsung has opened the beta program, and you can join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea only, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page. In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
   • If you’re using the Galaxy Watch in the USA, make sure that you are on the active plan with T-Mobile.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 9 Watch7 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 9 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

One UI 9 Watch Beta Program for the Galaxy Watch7 is now open!

Earlier, Samsung opened the One UI 9.0 Watch Beta Program for the Galaxy Watch8 for users in the US and in Korea to try out the new One UI Watch version, which was already released to the Galaxy Watch9 and Watch Ultra2 revealed this year.

While Samsung was working on One UI 9 Watch for the Galaxy Watch7 series, they opened the beta program. Starting from today, the Galaxy Watch8 series has officially started its beta program for One UI 9.0 according to a report made by Android Sage.

The following firmware builds may have been selected:

• SM-L310: L310XXU2ZZH3 [KOO]
• SM-L300: L300XXU2ZZH3 [KOO]

Samsung has opened the beta program, and you can join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea only, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page. In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
   • If you’re using the Galaxy Watch in the USA, make sure that you are on the active plan with T-Mobile.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 9 Watch7 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 9 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

One UI 9 Watch Beta Program for the Galaxy Watch7 is now open!

Earlier, Samsung opened the One UI 9.0 Watch Beta Program for the Galaxy Watch8 for users in the US and in Korea to try out the new One UI Watch version, which was already released to the Galaxy Watch9 and Watch Ultra2 revealed this year.

While Samsung was working on One UI 9 Watch for the Galaxy Watch7 series, they opened the beta program. Starting from today, the Galaxy Watch8 series has officially started its beta program for One UI 9.0 according to a report made by Android Sage.

The following firmware builds may have been selected:

• SM-L310: L310XXU2ZZH3 [KOO]
• SM-L300: L300XXU2ZZH3 [KOO]

Samsung has opened the beta program, and you can join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea only, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page. In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
   • If you’re using the Galaxy Watch in the USA, make sure that you are on the active plan with T-Mobile.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 9 Watch7 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 9 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

One UI 9 Watch Beta Program for the Galaxy Watch8 is now open!

The Galaxy Watch8 series was released last year with One UI 8 Watch as the default software, based on Wear OS 6. This wearable series provides you with new features, such as Antioxidant Index and Vascular Load.

While Samsung was working on One UI 9 Watch for the Galaxy Watch8 series which has entered testing since a month ago, new builds for the Galaxy Watch8 and the Watch Ultra have been spotted as the One UI 9 Watch Beta is still being prepared.

Starting from today, the Galaxy Watch8 series has officially started its beta program for One UI 9.0, with the first beta build being spotted for this smartwatch series by Tarun Vats.

The following firmware builds have been spotted:

• SM-L330: L330XXU2ZZH3 [KOO]
• SM-L320: L330XXU2ZZH3 [KOO]

Samsung has opened the beta program, and you can join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea only, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page. In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
   • If you’re using the Galaxy Watch in the USA, make sure that you are on the active plan with T-Mobile.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 9 Watch8 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 8 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

One UI 9 Watch Beta Program for the Galaxy Watch8 is now open!

The Galaxy Watch8 series was released last year with One UI 8 Watch as the default software, based on Wear OS 6. This wearable series provides you with new features, such as Antioxidant Index and Vascular Load.

While Samsung was working on One UI 9 Watch for the Galaxy Watch8 series which has entered testing since a month ago, new builds for the Galaxy Watch8 and the Watch Ultra have been spotted as the One UI 9 Watch Beta is still being prepared.

Starting from today, the Galaxy Watch8 series has officially started its beta program for One UI 9.0, with the first beta build being spotted for this smartwatch series by Tarun Vats.

The following firmware builds have been spotted:

• SM-L330: L330XXU2ZZH3 [KOO]
• SM-L320: L330XXU2ZZH3 [KOO]

Samsung has opened the beta program, and you can join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea only, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page. In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
   • If you’re using the Galaxy Watch in the USA, make sure that you are on the active plan with T-Mobile.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 9 Watch8 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 8 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

One UI 9 Watch Beta Program for the Galaxy Watch8 is now open!

The Galaxy Watch8 series was released last year with One UI 8 Watch as the default software, based on Wear OS 6. This wearable series provides you with new features, such as Antioxidant Index and Vascular Load.

While Samsung was working on One UI 9 Watch for the Galaxy Watch8 series which has entered testing since a month ago, new builds for the Galaxy Watch8 and the Watch Ultra have been spotted as the One UI 9 Watch Beta is still being prepared.

Starting from today, the Galaxy Watch8 series has officially started its beta program for One UI 9.0, with the first beta build being spotted for this smartwatch series by Tarun Vats.

The following firmware builds have been spotted:

• SM-L330: L330XXU2ZZH3 [KOO]
• SM-L320: L330XXU2ZZH3 [KOO]

Samsung has opened the beta program, and you can join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea only, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page. In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
   • If you’re using the Galaxy Watch in the USA, make sure that you are on the active plan with T-Mobile.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 9 Watch8 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 8 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

One UI 9 Watch Beta Program for the Galaxy Watch8 is now open!

The Galaxy Watch8 series was released last year with One UI 8 Watch as the default software, based on Wear OS 6. This wearable series provides you with new features, such as Antioxidant Index and Vascular Load.

While Samsung was working on One UI 9 Watch for the Galaxy Watch8 series which has entered testing since a month ago, new builds for the Galaxy Watch8 and the Watch Ultra have been spotted as the One UI 9 Watch Beta is still being prepared.

Starting from today, the Galaxy Watch8 series has officially started its beta program for One UI 9.0, with the first beta build being spotted for this smartwatch series by Tarun Vats.

The following firmware builds have been spotted:

• SM-L330: L330XXU2ZZH3 [KOO]
• SM-L320: L330XXU2ZZH3 [KOO]

Samsung has opened the beta program, and you can join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea only, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page. In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
   • If you’re using the Galaxy Watch in the USA, make sure that you are on the active plan with T-Mobile.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 9 Watch8 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 8 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

One UI 9 Watch Beta Program for the Galaxy Watch8 is now open!

The Galaxy Watch8 series was released last year with One UI 8 Watch as the default software, based on Wear OS 6. This wearable series provides you with new features, such as Antioxidant Index and Vascular Load.

While Samsung was working on One UI 9 Watch for the Galaxy Watch8 series which has entered testing since a month ago, new builds for the Galaxy Watch8 and the Watch Ultra have been spotted as the One UI 9 Watch Beta is still being prepared.

Starting from today, the Galaxy Watch8 series has officially started its beta program for One UI 9.0, with the first beta build being spotted for this smartwatch series by Tarun Vats.

The following firmware builds have been spotted:

• SM-L330: L330XXU2ZZH3 [KOO]
• SM-L320: L330XXU2ZZH3 [KOO]

Samsung has opened the beta program, and you can join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea only, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

You can participate to the Beta Program using Samsung Members on your phone using either a beta banner or the “Beta Program” page. In order to participate, follow these steps:

1. Ensure that your Galaxy Watch and your phone are both from the USA (XAA) or Korea (KOO) to ensure maximum compatibility
   • On your phone, open Settings > About phone > Software information, and look for “Service provider software version”. Make sure it contains XAA or KOO.
   • On your watch, unlock Developer settings by opening Settings > About > Software information and tapping “Software version” 4 times, and refer to the second line that contains your watch’s CSC. Make sure it contains XAA or KOO.
   • If you’re using the Galaxy Watch in the USA, make sure that you are on the active plan with T-Mobile.
2. Open Samsung Members
3. Scroll down to Beta Program
4. Search for entries like “One UI 9 Watch8 Beta”
5. Read the description and follow the steps on the screen
6. Press “Join”
7. Check for software updates

Please note that this Beta Program is for users to test all aspects of One UI 8 Watch and to report all bugs found.

Make sure that you have stable internet connectivity when downloading the update, as it can be large in size. When installing the update, make sure that your watch is fully charged and in a cold environment to avoid interruptions caused by heat and by low battery. Never interrupt the update installation in any way during the process, or you may face problems later.

One UI 9 Watch Beta is coming soon for the Galaxy Watch7

The Galaxy Watch7 series was released in 2024 with One UI 6 Watch as the default software, based on Wear OS 5. This wearable series provides you with new features.

While Samsung was working on One UI 9 Watch for the Galaxy Watch7 series which has entered testing, new builds for the Galaxy Watch7 have been spotted, which suggest that One UI 9 Watch Beta is going to start in the next few weeks.

According to the testing servers in Korea, the Galaxy Watch7 series is getting ready for the next stage of testing. We have spotted the first internal beta build being spotted for this smartwatch series.

The following firmware builds have been spotted:

• SM-L310: L310XXU2ZZH2 [KOO]
• SM-L300: L300XXU2ZZH2 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch Beta is coming soon for the Galaxy Watch7

The Galaxy Watch7 series was released in 2024 with One UI 6 Watch as the default software, based on Wear OS 5. This wearable series provides you with new features.

While Samsung was working on One UI 9 Watch for the Galaxy Watch7 series which has entered testing, new builds for the Galaxy Watch7 have been spotted, which suggest that One UI 9 Watch Beta is going to start in the next few weeks.

According to the testing servers in Korea, the Galaxy Watch7 series is getting ready for the next stage of testing. We have spotted the first internal beta build being spotted for this smartwatch series.

The following firmware builds have been spotted:

• SM-L310: L310XXU2ZZH2 [KOO]
• SM-L300: L300XXU2ZZH2 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch Beta is coming soon for the Galaxy Watch7

The Galaxy Watch7 series was released in 2024 with One UI 6 Watch as the default software, based on Wear OS 5. This wearable series provides you with new features.

While Samsung was working on One UI 9 Watch for the Galaxy Watch7 series which has entered testing, new builds for the Galaxy Watch7 have been spotted, which suggest that One UI 9 Watch Beta is going to start in the next few weeks.

According to the testing servers in Korea, the Galaxy Watch7 series is getting ready for the next stage of testing. We have spotted the first internal beta build being spotted for this smartwatch series.

The following firmware builds have been spotted:

• SM-L310: L310XXU2ZZH2 [KOO]
• SM-L300: L300XXU2ZZH2 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch Beta is coming soon for the Galaxy Watch7

The Galaxy Watch7 series was released in 2024 with One UI 6 Watch as the default software, based on Wear OS 5. This wearable series provides you with new features.

While Samsung was working on One UI 9 Watch for the Galaxy Watch7 series which has entered testing, new builds for the Galaxy Watch7 have been spotted, which suggest that One UI 9 Watch Beta is going to start in the next few weeks.

According to the testing servers in Korea, the Galaxy Watch7 series is getting ready for the next stage of testing. We have spotted the first internal beta build being spotted for this smartwatch series.

The following firmware builds have been spotted:

• SM-L310: L310XXU2ZZH2 [KOO]
• SM-L300: L300XXU2ZZH2 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch Beta is coming soon for the Galaxy Watch7

The Galaxy Watch7 series was released in 2024 with One UI 6 Watch as the default software, based on Wear OS 5. This wearable series provides you with new features.

While Samsung was working on One UI 9 Watch for the Galaxy Watch7 series which has entered testing, new builds for the Galaxy Watch7 have been spotted, which suggest that One UI 9 Watch Beta is going to start in the next few weeks.

According to the testing servers in Korea, the Galaxy Watch7 series is getting ready for the next stage of testing. We have spotted the first internal beta build being spotted for this smartwatch series.

The following firmware builds have been spotted:

• SM-L310: L310XXU2ZZH2 [KOO]
• SM-L300: L300XXU2ZZH2 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch Beta is coming soon for the Galaxy Watch8 and Watch Ultra

The Galaxy Watch8 series was released last year with One UI 8 Watch as the default software, based on Wear OS 6. This wearable series provides you with new features, such as Antioxidant Index and Vascular Load.

While Samsung was working on One UI 9 Watch for the Galaxy Watch8 series which has entered testing since a month ago, new builds for the Galaxy Watch8 and the Watch Ultra have been spotted, which suggest that One UI 9 Watch Beta is going to start in the next few weeks.

According to the testing servers in Korea, the Galaxy Watch8 series is getting ready for testing, with the first internal beta build being spotted for this smartwatch series by Tarun Vats.

The following firmware builds have been spotted:

• SM-L500: L500XXU2ZZH2 [KOO]
• SM-L330: L330XXU2ZZH2 [KOO]
• SM-L320: L330XXU2ZZH2 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch Beta is coming soon for the Galaxy Watch8 and Watch Ultra

The Galaxy Watch8 series was released last year with One UI 8 Watch as the default software, based on Wear OS 6. This wearable series provides you with new features, such as Antioxidant Index and Vascular Load.

While Samsung was working on One UI 9 Watch for the Galaxy Watch8 series which has entered testing since a month ago, new builds for the Galaxy Watch8 and the Watch Ultra have been spotted, which suggest that One UI 9 Watch Beta is going to start in the next few weeks.

According to the testing servers in Korea, the Galaxy Watch8 series is getting ready for testing, with the first internal beta build being spotted for this smartwatch series by Tarun Vats.

The following firmware builds have been spotted:

• SM-L500: L500XXU2ZZH2 [KOO]
• SM-L330: L330XXU2ZZH2 [KOO]
• SM-L320: L330XXU2ZZH2 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch Beta is coming soon for the Galaxy Watch8 and Watch Ultra

The Galaxy Watch8 series was released last year with One UI 8 Watch as the default software, based on Wear OS 6. This wearable series provides you with new features, such as Antioxidant Index and Vascular Load.

While Samsung was working on One UI 9 Watch for the Galaxy Watch8 series which has entered testing since a month ago, new builds for the Galaxy Watch8 and the Watch Ultra have been spotted, which suggest that One UI 9 Watch Beta is going to start in the next few weeks.

According to the testing servers in Korea, the Galaxy Watch8 series is getting ready for testing, with the first internal beta build being spotted for this smartwatch series by Tarun Vats.

The following firmware builds have been spotted:

• SM-L500: L500XXU2ZZH2 [KOO]
• SM-L330: L330XXU2ZZH2 [KOO]
• SM-L320: L330XXU2ZZH2 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch Beta is coming soon for the Galaxy Watch8 and Watch Ultra

The Galaxy Watch8 series was released last year with One UI 8 Watch as the default software, based on Wear OS 6. This wearable series provides you with new features, such as Antioxidant Index and Vascular Load.

While Samsung was working on One UI 9 Watch for the Galaxy Watch8 series which has entered testing since a month ago, new builds for the Galaxy Watch8 and the Watch Ultra have been spotted, which suggest that One UI 9 Watch Beta is going to start in the next few weeks.

According to the testing servers in Korea, the Galaxy Watch8 series is getting ready for testing, with the first internal beta build being spotted for this smartwatch series by Tarun Vats.

The following firmware builds have been spotted:

• SM-L500: L500XXU2ZZH2 [KOO]
• SM-L330: L330XXU2ZZH2 [KOO]
• SM-L320: L330XXU2ZZH2 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch Beta is coming soon for the Galaxy Watch8 and Watch Ultra

The Galaxy Watch8 series was released last year with One UI 8 Watch as the default software, based on Wear OS 6. This wearable series provides you with new features, such as Antioxidant Index and Vascular Load.

While Samsung was working on One UI 9 Watch for the Galaxy Watch8 series which has entered testing since a month ago, new builds for the Galaxy Watch8 and the Watch Ultra have been spotted, which suggest that One UI 9 Watch Beta is going to start in the next few weeks.

According to the testing servers in Korea, the Galaxy Watch8 series is getting ready for testing, with the first internal beta build being spotted for this smartwatch series by Tarun Vats.

The following firmware builds have been spotted:

• SM-L500: L500XXU2ZZH2 [KOO]
• SM-L330: L330XXU2ZZH2 [KOO]
• SM-L320: L330XXU2ZZH2 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

EXCLUSIVE: One UI 9 Watch starts development for the Galaxy Watch6 and Watch5

The Galaxy Watch6 series was released in 2023 with One UI 5 Watch as the default software, based on Wear OS 4. It was an upgrade over the Galaxy Watch5 series, and it provided various upgrades and new features to enhance your wearable experience.

While Samsung was working on One UI 9 Watch for various Galaxy smartwatches, including the Galaxy Watch8, Watch8 classic, and Watch7 series, new builds for the Galaxy Watch6 and the Watch5 have been spotted.

According to the testing servers in Korea, the Galaxy Watch6 and Watch5 series are getting ready for testing One UI 9.0 Watch, with the first internal build being spotted for this smartwatch series that we have spotted, which can be seen by the following firmware builds:

• SM-R960: R960XXU2DZG6 [KOO]
• SM-R950: R950XXU2DZG6 [KOO]
• SM-R940: R940XXU2DZG6 [KOO]
• SM-R930: R930XXU2DZG6 [KOO]
• SM-R920: R920XXU2EZG6 [KOO]
• SM-R910: R910XXU2EZG6 [KOO]
• SM-R900: R900XXU2EZG6 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, according to the rollout history. T-Mobile is the only participating carrier in the US.

Please note that the Galaxy Watch5 users may not get a chance to try out One UI 9 Watch with the beta program before the official release, according to the recent rollout records. Galaxy Watch6 users may probably be able to join the beta program if Samsung plans to open it. There is no clear date yet on whether One UI 9 Watch will enter the beta stage.

EXCLUSIVE: One UI 9 Watch starts development for the Galaxy Watch6 and Watch5

The Galaxy Watch6 series was released in 2023 with One UI 5 Watch as the default software, based on Wear OS 4. It was an upgrade over the Galaxy Watch5 series, and it provided various upgrades and new features to enhance your wearable experience.

While Samsung was working on One UI 9 Watch for various Galaxy smartwatches, including the Galaxy Watch8, Watch8 classic, and Watch7 series, new builds for the Galaxy Watch6 and the Watch5 have been spotted.

According to the testing servers in Korea, the Galaxy Watch6 and Watch5 series are getting ready for testing One UI 9.0 Watch, with the first internal build being spotted for this smartwatch series that we have spotted, which can be seen by the following firmware builds:

• SM-R960: R960XXU2DZG6 [KOO]
• SM-R950: R950XXU2DZG6 [KOO]
• SM-R940: R940XXU2DZG6 [KOO]
• SM-R930: R930XXU2DZG6 [KOO]
• SM-R920: R920XXU2EZG6 [KOO]
• SM-R910: R910XXU2EZG6 [KOO]
• SM-R900: R900XXU2EZG6 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, according to the rollout history. T-Mobile is the only participating carrier in the US.

Please note that the Galaxy Watch5 users may not get a chance to try out One UI 9 Watch with the beta program before the official release, according to the recent rollout records. Galaxy Watch6 users may probably be able to join the beta program if Samsung plans to open it. There is no clear date yet on whether One UI 9 Watch will enter the beta stage.

EXCLUSIVE: One UI 9 Watch starts development for the Galaxy Watch6 and Watch5

The Galaxy Watch6 series was released in 2023 with One UI 5 Watch as the default software, based on Wear OS 4. It was an upgrade over the Galaxy Watch5 series, and it provided various upgrades and new features to enhance your wearable experience.

While Samsung was working on One UI 9 Watch for various Galaxy smartwatches, including the Galaxy Watch8, Watch8 classic, and Watch7 series, new builds for the Galaxy Watch6 and the Watch5 have been spotted.

According to the testing servers in Korea, the Galaxy Watch6 and Watch5 series are getting ready for testing One UI 9.0 Watch, with the first internal build being spotted for this smartwatch series that we have spotted, which can be seen by the following firmware builds:

• SM-R960: R960XXU2DZG6 [KOO]
• SM-R950: R950XXU2DZG6 [KOO]
• SM-R940: R940XXU2DZG6 [KOO]
• SM-R930: R930XXU2DZG6 [KOO]
• SM-R920: R920XXU2EZG6 [KOO]
• SM-R910: R910XXU2EZG6 [KOO]
• SM-R900: R900XXU2EZG6 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, according to the rollout history. T-Mobile is the only participating carrier in the US.

Please note that the Galaxy Watch5 users may not get a chance to try out One UI 9 Watch with the beta program before the official release, according to the recent rollout records. Galaxy Watch6 users may probably be able to join the beta program if Samsung plans to open it. There is no clear date yet on whether One UI 9 Watch will enter the beta stage.

EXCLUSIVE: One UI 9 Watch starts development for the Galaxy Watch6 and Watch5

The Galaxy Watch6 series was released in 2023 with One UI 5 Watch as the default software, based on Wear OS 4. It was an upgrade over the Galaxy Watch5 series, and it provided various upgrades and new features to enhance your wearable experience.

While Samsung was working on One UI 9 Watch for various Galaxy smartwatches, including the Galaxy Watch8, Watch8 classic, and Watch7 series, new builds for the Galaxy Watch6 and the Watch5 have been spotted.

According to the testing servers in Korea, the Galaxy Watch6 and Watch5 series are getting ready for testing One UI 9.0 Watch, with the first internal build being spotted for this smartwatch series that we have spotted, which can be seen by the following firmware builds:

• SM-R960: R960XXU2DZG6 [KOO]
• SM-R950: R950XXU2DZG6 [KOO]
• SM-R940: R940XXU2DZG6 [KOO]
• SM-R930: R930XXU2DZG6 [KOO]
• SM-R920: R920XXU2EZG6 [KOO]
• SM-R910: R910XXU2EZG6 [KOO]
• SM-R900: R900XXU2EZG6 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, according to the rollout history. T-Mobile is the only participating carrier in the US.

Please note that the Galaxy Watch5 users may not get a chance to try out One UI 9 Watch with the beta program before the official release, according to the recent rollout records. Galaxy Watch6 users may probably be able to join the beta program if Samsung plans to open it. There is no clear date yet on whether One UI 9 Watch will enter the beta stage.

EXCLUSIVE: One UI 9 Watch starts development for the Galaxy Watch6 and Watch5

The Galaxy Watch6 series was released in 2023 with One UI 5 Watch as the default software, based on Wear OS 4. It was an upgrade over the Galaxy Watch5 series, and it provided various upgrades and new features to enhance your wearable experience.

While Samsung was working on One UI 9 Watch for various Galaxy smartwatches, including the Galaxy Watch8, Watch8 classic, and Watch7 series, new builds for the Galaxy Watch6 and the Watch5 have been spotted.

According to the testing servers in Korea, the Galaxy Watch6 and Watch5 series are getting ready for testing One UI 9.0 Watch, with the first internal build being spotted for this smartwatch series that we have spotted, which can be seen by the following firmware builds:

• SM-R960: R960XXU2DZG6 [KOO]
• SM-R950: R950XXU2DZG6 [KOO]
• SM-R940: R940XXU2DZG6 [KOO]
• SM-R930: R930XXU2DZG6 [KOO]
• SM-R920: R920XXU2EZG6 [KOO]
• SM-R910: R910XXU2EZG6 [KOO]
• SM-R900: R900XXU2EZG6 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, according to the rollout history. T-Mobile is the only participating carrier in the US.

Please note that the Galaxy Watch5 users may not get a chance to try out One UI 9 Watch with the beta program before the official release, according to the recent rollout records. Galaxy Watch6 users may probably be able to join the beta program if Samsung plans to open it. There is no clear date yet on whether One UI 9 Watch will enter the beta stage.

https://www.wacoca.com/life/433051/ サムスン、Galaxy Watch 9・Ultra 2に5年間のOSアップデート提供へ…「健康データエコシステムを固める」 — BigGo ファイナンス #Apple #AppleUpgrade #GalaxyWatch9 #GalaxyWatchUltra2 #GalaxyZFlip8 #GalaxyZFold8 #health #KB証券 #Kenkō #LGInnotek #OneUIWatch #SKHynix #SnapdragonWearElite #WearOS #キム・ドンウォン #サムスン電子 #健康

https://www.wacoca.com/life/433051/ サムスン、Galaxy Watch 9・Ultra 2に5年間のOSアップデート提供へ…「健康データエコシステムを固める」 — BigGo ファイナンス #Apple #AppleUpgrade #GalaxyWatch9 #GalaxyWatchUltra2 #GalaxyZFlip8 #GalaxyZFold8 #health #KB証券 #Kenkō #LGInnotek #OneUIWatch #SKHynix #SnapdragonWearElite #WearOS #キム・ドンウォン #サムスン電子 #健康

https://www.wacoca.com/life/433051/ サムスン、Galaxy Watch 9・Ultra 2に5年間のOSアップデート提供へ…「健康データエコシステムを固める」 — BigGo ファイナンス #Apple #AppleUpgrade #GalaxyWatch9 #GalaxyWatchUltra2 #GalaxyZFlip8 #GalaxyZFold8 #health #KB証券 #Kenkō #LGInnotek #OneUIWatch #SKHynix #SnapdragonWearElite #WearOS #キム・ドンウォン #サムスン電子 #健康

https://www.wacoca.com/life/433051/ サムスン、Galaxy Watch 9・Ultra 2に5年間のOSアップデート提供へ…「健康データエコシステムを固める」 — BigGo ファイナンス #Apple #AppleUpgrade #GalaxyWatch9 #GalaxyWatchUltra2 #GalaxyZFlip8 #GalaxyZFold8 #health #KB証券 #Kenkō #LGInnotek #OneUIWatch #SKHynix #SnapdragonWearElite #WearOS #キム・ドンウォン #サムスン電子 #健康

Samsung Extends Galaxy Watch 9, Ultra 2 OS Updates to 5 Years to Lock In Health Data Ecosystem — BigGo Finance

Samsung Electronics will extend the operating system (OS) update support period for its next-generation smartwatches, the Galaxy Watch…
#EuropeSays #Korea #KR #SamsungElectronics #Apple #AppleUpgrade #GalaxyWatch9 #GalaxyWatchUltra2 #GalaxyZFlip8 #GalaxyZFold8 #KBSecurities #KimDong-won #LGInnotek #OneUIWatch #Samsung #SKhynix #SnapdragonWearElite #WearOS
https://www.europesays.com/korea/97230/

One UI 9 Watch starts development for the Galaxy Watch7

The Galaxy Watch7 series was released in 2024 with One UI 6 Watch as the default software, based on Wear OS 5. This wearable series provides you with new features.

While Samsung was working on One UI 9 Watch for the upcoming Galaxy Watch9 series which will be unveiled on July 22nd in this summer’s Galaxy Unpacked event, new builds for the Galaxy Watch7 have been spotted.

According to the testing servers in Korea, the Galaxy Watch7 series is getting ready for testing One UI 9.0 Watch, with the first internal build being spotted for this smartwatch series by Tarun Vats.

The following firmware builds have been spotted:

• SM-L310: L310XXU2CZG4 [KOO]
• SM-L300: L300XXU2CZG4 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch starts development for the Galaxy Watch7

The Galaxy Watch7 series was released in 2024 with One UI 6 Watch as the default software, based on Wear OS 5. This wearable series provides you with new features.

While Samsung was working on One UI 9 Watch for the upcoming Galaxy Watch9 series which will be unveiled on July 22nd in this summer’s Galaxy Unpacked event, new builds for the Galaxy Watch7 have been spotted.

According to the testing servers in Korea, the Galaxy Watch7 series is getting ready for testing One UI 9.0 Watch, with the first internal build being spotted for this smartwatch series by Tarun Vats.

The following firmware builds have been spotted:

• SM-L310: L310XXU2CZG4 [KOO]
• SM-L300: L300XXU2CZG4 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch starts development for the Galaxy Watch7

The Galaxy Watch7 series was released in 2024 with One UI 6 Watch as the default software, based on Wear OS 5. This wearable series provides you with new features.

While Samsung was working on One UI 9 Watch for the upcoming Galaxy Watch9 series which will be unveiled on July 22nd in this summer’s Galaxy Unpacked event, new builds for the Galaxy Watch7 have been spotted.

According to the testing servers in Korea, the Galaxy Watch7 series is getting ready for testing One UI 9.0 Watch, with the first internal build being spotted for this smartwatch series by Tarun Vats.

The following firmware builds have been spotted:

• SM-L310: L310XXU2CZG4 [KOO]
• SM-L300: L300XXU2CZG4 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch starts development for the Galaxy Watch7

The Galaxy Watch7 series was released in 2024 with One UI 6 Watch as the default software, based on Wear OS 5. This wearable series provides you with new features.

While Samsung was working on One UI 9 Watch for the upcoming Galaxy Watch9 series which will be unveiled on July 22nd in this summer’s Galaxy Unpacked event, new builds for the Galaxy Watch7 have been spotted.

According to the testing servers in Korea, the Galaxy Watch7 series is getting ready for testing One UI 9.0 Watch, with the first internal build being spotted for this smartwatch series by Tarun Vats.

The following firmware builds have been spotted:

• SM-L310: L310XXU2CZG4 [KOO]
• SM-L300: L300XXU2CZG4 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

One UI 9 Watch starts development for the Galaxy Watch7

The Galaxy Watch7 series was released in 2024 with One UI 6 Watch as the default software, based on Wear OS 5. This wearable series provides you with new features.

While Samsung was working on One UI 9 Watch for the upcoming Galaxy Watch9 series which will be unveiled on July 22nd in this summer’s Galaxy Unpacked event, new builds for the Galaxy Watch7 have been spotted.

According to the testing servers in Korea, the Galaxy Watch7 series is getting ready for testing One UI 9.0 Watch, with the first internal build being spotted for this smartwatch series by Tarun Vats.

The following firmware builds have been spotted:

• SM-L310: L310XXU2CZG4 [KOO]
• SM-L300: L300XXU2CZG4 [KOO]

Currently, there are no beta builds for the above smartwatch series yet, but if Samsung has opened the beta program, you will be able to join the beta program through Samsung Members if your watch, your region, and your carrier is eligible. It’s expected to be available in both the US and Korea, with Bluetooth and LTE versions being eligible for participation in the beta program, accordong to the rollout history. T-Mobile is the only participating carrier in the US.

https://www.europesays.com/uk/582256/ Two ways to view and change watch faces on a Galaxy Watch #Gadgets #GalaxyWatch #GalaxyWatch4 #GalaxyWatch4Classic #GalaxyWatch5 #GalaxyWatch5Pro #GalaxyWatch6 #GalaxyWatch6Classic #GalaxyWatch7 #GalaxyWatch8 #GalaxyWatch8Classic #GalaxyWatchUltra #GalaxyWearable #OneUIWatch #Technology #UK #UnitedKingdom #WearOS

https://www.europesays.com/ie/190447/ Two ways to view and change watch faces on a Galaxy Watch #Éire #Gadgets #GalaxyWatch #GalaxyWatch4 #GalaxyWatch4Classic #GalaxyWatch5 #GalaxyWatch5Pro #GalaxyWatch6 #GalaxyWatch6Classic #GalaxyWatch7 #GalaxyWatch8 #GalaxyWatch8Classic #GalaxyWatchUltra #GalaxyWearable #IE #Ireland #OneUIWatch #Technology #WearOS

Two ways to view and change watch faces on a Galaxy Watch

Galaxy Watches come with plenty of pre-installed watch faces. Some have an analog look, others are digit…
#NewsBeep #News #US #USA #UnitedStates #UnitedStatesOfAmerica #Gadgets #GalaxyWatch #GalaxyWatch4 #GalaxyWatch4Classic #GalaxyWatch5 #GalaxyWatch5Pro #GalaxyWatch6 #GalaxyWatch6Classic #GalaxyWatch7 #GalaxyWatch8 #GalaxyWatch8Classic #GalaxyWatchUltra #GalaxyWearable #OneUIWatch #Technology #WearOS
https://www.newsbeep.com/us/302849/

Two ways to view and change watch faces on a Galaxy Watch

Galaxy Watches come with plenty of pre-installed watch faces. Some have an analog look, others are digit…
#NewsBeep #News #US #USA #UnitedStates #UnitedStatesOfAmerica #Gadgets #GalaxyWatch #GalaxyWatch4 #GalaxyWatch4Classic #GalaxyWatch5 #GalaxyWatch5Pro #GalaxyWatch6 #GalaxyWatch6Classic #GalaxyWatch7 #GalaxyWatch8 #GalaxyWatch8Classic #GalaxyWatchUltra #GalaxyWearable #OneUIWatch #Technology #WearOS
https://www.newsbeep.com/us/302849/

https://www.europesays.com/ie/190447/ Two ways to view and change watch faces on a Galaxy Watch #Éire #Gadgets #GalaxyWatch #GalaxyWatch4 #GalaxyWatch4Classic #GalaxyWatch5 #GalaxyWatch5Pro #GalaxyWatch6 #GalaxyWatch6Classic #GalaxyWatch7 #GalaxyWatch8 #GalaxyWatch8Classic #GalaxyWatchUltra #GalaxyWearable #IE #Ireland #OneUIWatch #Technology #WearOS

Two ways to view and change watch faces on a Galaxy Watch

Galaxy Watches come with plenty of pre-installed watch faces. Some have an analog look, others are digital, and…
#NewsBeep #News #Gadgets #GalaxyWatch #GalaxyWatch4 #GalaxyWatch4Classic #GalaxyWatch5 #GalaxyWatch5Pro #GalaxyWatch6 #GalaxyWatch6Classic #GalaxyWatch7 #GalaxyWatch8 #GalaxyWatch8Classic #GalaxyWatchUltra #GalaxyWearable #OneUIWatch #Technology #UK #UnitedKingdom #WearOS
https://www.newsbeep.com/uk/273190/

Samsung is preparing for the next One UI 7 Watch Beta!

After the One UI 7 rollout resume and its aggressive rollout nature in Korea, Samsung is preparing for the One UI 7 Watch Beta Program by a new firmware for the Galaxy Watch7 and the Watch Ultra smartwatches. This is first spotted by Alfatürk in X where the firmware information for the Watch7 44mm version, SM-L310, was shown with the first Beta version of the upcoming One UI Watch.

We are, however, skeptical as it’s uploaded to a country, Türkiye (TUR), that was never eligible for any Beta program, but we’ve verified that the Korean firmware was also uploaded, and we expect that, just like the previous Beta program, only Korea and USA are eligible for this update, with the BT models being the only target.

The Korean firmware servers say:

• L300XXU1ZYDA (KOO)
• L310XXU1ZYDA (KOO)
• L700XXU1ZYDA (KOO)

We have no information about this build, but we’ll provide you with more information once Samsung makes the Beta program official, which will start during the first days of this summer.

#Android #news #oneUi #OneUI7 #OneUI7Watch #OneUIWatch #Samsung #smartwatch #Smartwatches #Tech #Technology #update #Wearable #Wearables

Samsung is preparing for the next One UI 7 Watch Beta!

After the One UI 7 rollout resume and its aggressive rollout nature in Korea, Samsung is preparing for the One UI 7 Watch Beta Program by a new firmware for the Galaxy Watch7 and the Watch Ultra smartwatches. This is first spotted by Alfatürk in X where the firmware information for the Watch7 44mm version, SM-L310, was shown with the first Beta version of the upcoming One UI Watch.

We are, however, skeptical as it’s uploaded to a country, Türkiye (TUR), that was never eligible for any Beta program, but we’ve verified that the Korean firmware was also uploaded, and we expect that, just like the previous Beta program, only Korea and USA are eligible for this update, with the BT models being the only target.

The Korean firmware servers say:

• L300XXU1ZYDA (KOO)
• L310XXU1ZYDA (KOO)
• L700XXU1ZYDA (KOO)

We have no information about this build, but we’ll provide you with more information once Samsung makes the Beta program official, which will start during the first days of this summer.

#Android #news #oneUi #OneUI7 #OneUI7Watch #OneUIWatch #Samsung #smartwatch #Smartwatches #Tech #Technology #update #Wearable #Wearables

Samsung is preparing for the next One UI 7 Watch Beta!

After the One UI 7 rollout resume and its aggressive rollout nature in Korea, Samsung is preparing for the One UI 7 Watch Beta Program by a new firmware for the Galaxy Watch7 and the Watch Ultra smartwatches. This is first spotted by Alfatürk in X where the firmware information for the Watch7 44mm version, SM-L310, was shown with the first Beta version of the upcoming One UI Watch.

We are, however, skeptical as it’s uploaded to a country, Türkiye (TUR), that was never eligible for any Beta program, but we’ve verified that the Korean firmware was also uploaded, and we expect that, just like the previous Beta program, only Korea and USA are eligible for this update, with the BT models being the only target.

The Korean firmware servers say:

• L300XXU1ZYDA (KOO)
• L310XXU1ZYDA (KOO)
• L700XXU1ZYDA (KOO)

We have no information about this build, but we’ll provide you with more information once Samsung makes the Beta program official, which will start during the first days of this summer.

#Android #news #oneUi #OneUI7 #OneUI7Watch #OneUIWatch #Samsung #smartwatch #Smartwatches #Tech #Technology #update #Wearable #Wearables

Samsung is preparing for the next One UI 7 Watch Beta!

After the One UI 7 rollout resume and its aggressive rollout nature in Korea, Samsung is preparing for the One UI 7 Watch Beta Program by a new firmware for the Galaxy Watch7 and the Watch Ultra smartwatches. This is first spotted by Alfatürk in X where the firmware information for the Watch7 44mm version, SM-L310, was shown with the first Beta version of the upcoming One UI Watch.

We are, however, skeptical as it’s uploaded to a country, Türkiye (TUR), that was never eligible for any Beta program, but we’ve verified that the Korean firmware was also uploaded, and we expect that, just like the previous Beta program, only Korea and USA are eligible for this update, with the BT models being the only target.

The Korean firmware servers say:

• L300XXU1ZYDA (KOO)
• L310XXU1ZYDA (KOO)
• L700XXU1ZYDA (KOO)

We have no information about this build, but we’ll provide you with more information once Samsung makes the Beta program official, which will start during the first days of this summer.

#Android #news #oneUi #OneUI7 #OneUI7Watch #OneUIWatch #Samsung #smartwatch #Smartwatches #Tech #Technology #update #Wearable #Wearables

Samsung is preparing for the next One UI 7 Watch Beta!

After the One UI 7 rollout resume and its aggressive rollout nature in Korea, Samsung is preparing for the One UI 7 Watch Beta Program by a new firmware for the Galaxy Watch7 and the Watch Ultra smartwatches. This is first spotted by Alfatürk in X where the firmware information for the Watch7 44mm version, SM-L310, was shown with the first Beta version of the upcoming One UI Watch.

We are, however, skeptical as it’s uploaded to a country, Türkiye (TUR), that was never eligible for any Beta program, but we’ve verified that the Korean firmware was also uploaded, and we expect that, just like the previous Beta program, only Korea and USA are eligible for this update, with the BT models being the only target.

The Korean firmware servers say:

• L300XXU1ZYDA (KOO)
• L310XXU1ZYDA (KOO)
• L700XXU1ZYDA (KOO)

We have no information about this build, but we’ll provide you with more information once Samsung makes the Beta program official, which will start during the first days of this summer.

#Android #news #oneUi #OneUI7 #OneUI7Watch #OneUIWatch #Samsung #smartwatch #Smartwatches #Tech #Technology #update #Wearable #Wearables

Some Galaxy Watch4 LTE units get One UI 6 Watch

Three months ago, Samsung have released the One UI 6 Watch for all the eligible smartwatches that include Galaxy Watch6, Watch5, and Watch4 in both the Bluetooth and the LTE variants. The rollout was very fast if you take a look at the surface level, with the rollout starting from the Galaxy Watch6 series.

After a long wait for users that didn’t get the One UI 6 Watch system for their Galaxy Watch4 LTE, we have finally spotted Samsung releasing this version of One UI for more Galaxy Watch4 LTE units in more countries, such as India.

To update your watch, open Galaxy Wearable on your phone and navigate to Watch settings > Watch software update > Download and Install. If you saw the One UI 6 update, you can now download it to your watch. However, if you still can’t get this update, wait for the update in the coming days or weeks, depending on your smartwatch and your country.

Some Galaxy Watch4 LTE units get One UI 6 Watch

Three months ago, Samsung have released the One UI 6 Watch for all the eligible smartwatches that include Galaxy Watch6, Watch5, and Watch4 in both the Bluetooth and the LTE variants. The rollout was very fast if you take a look at the surface level, with the rollout starting from the Galaxy Watch6 series.

After a long wait for users that didn’t get the One UI 6 Watch system for their Galaxy Watch4 LTE, we have finally spotted Samsung releasing this version of One UI for more Galaxy Watch4 LTE units in more countries, such as India.

To update your watch, open Galaxy Wearable on your phone and navigate to Watch settings > Watch software update > Download and Install. If you saw the One UI 6 update, you can now download it to your watch. However, if you still can’t get this update, wait for the update in the coming days or weeks, depending on your smartwatch and your country.