#omnifixo — Public Fediverse posts

If anyone has an #Omnifixo S2 (specifically the smaller 90x90mm) model sat around in a drawer gathering dust, I would be happy to exchange pennies with you for it. Neither the larger size nor clones don't quite fit my use case. #soldering

If anyone has an #Omnifixo S2 (specifically the smaller 90x90mm) model sat around in a drawer gathering dust, I would be happy to exchange pennies with you for it. Neither the larger size nor clones don't quite fit my use case. #soldering

If anyone has an #Omnifixo S2 (specifically the smaller 90x90mm) model sat around in a drawer gathering dust, I would be happy to exchange pennies with you for it. Neither the larger size nor clones don't quite fit my use case. #soldering

If anyone has an #Omnifixo S2 (specifically the smaller 90x90mm) model sat around in a drawer gathering dust, I would be happy to exchange pennies with you for it. Neither the larger size nor clones don't quite fit my use case. #soldering

If anyone has an #Omnifixo S2 (specifically the smaller 90x90mm) model sat around in a drawer gathering dust, I would be happy to exchange pennies with you for it. Neither the larger size nor clones don't quite fit my use case. #soldering

I published my portable solder box based on the #omnifixo helping hands.

https://www.printables.com/model/1604884-omnifixo-solder-box

#3dprinting #soldering #electronics

I published my portable solder box based on the #omnifixo helping hands.

https://www.printables.com/model/1604884-omnifixo-solder-box

#3dprinting #soldering #electronics

I published my portable solder box based on the #omnifixo helping hands.

https://www.printables.com/model/1604884-omnifixo-solder-box

#3dprinting #soldering #electronics

I published my portable solder box based on the #omnifixo helping hands.

https://www.printables.com/model/1604884-omnifixo-solder-box

#3dprinting #soldering #electronics

I published my portable solder box based on the #omnifixo helping hands.

https://www.printables.com/model/1604884-omnifixo-solder-box

#3dprinting #soldering #electronics

Jsem teď zcela náhodou narazil na šikovnou krabičku k OMNIFIXO a hned jsem si ji musel vytisknout. Je boží 😍

https://www.printables.com/model/1075086-omnifixo-field-box-with-divider

#Dnes3Dtisknu #OMNIFIXO

Jsem teď zcela náhodou narazil na šikovnou krabičku k OMNIFIXO a hned jsem si ji musel vytisknout. Je boží 😍

https://www.printables.com/model/1075086-omnifixo-field-box-with-divider

#Dnes3Dtisknu #OMNIFIXO

Jsem teď zcela náhodou narazil na šikovnou krabičku k OMNIFIXO a hned jsem si ji musel vytisknout. Je boží 😍

https://www.printables.com/model/1075086-omnifixo-field-box-with-divider

#Dnes3Dtisknu #OMNIFIXO

Jsem teď zcela náhodou narazil na šikovnou krabičku k OMNIFIXO a hned jsem si ji musel vytisknout. Je boží 😍

https://www.printables.com/model/1075086-omnifixo-field-box-with-divider

#Dnes3Dtisknu #OMNIFIXO

It's alive 😎 #sid #retro #chiptunes #usbsidpico #omnifixo

It's alive 😎 #sid #retro #chiptunes #usbsidpico #omnifixo

It's alive 😎 #sid #retro #chiptunes #usbsidpico #omnifixo

It's alive 😎 #sid #retro #chiptunes #usbsidpico #omnifixo

It's alive 😎 #sid #retro #chiptunes #usbsidpico #omnifixo

@arnelson to be fair it's not required nowadays to have that much space or wait for a workstation setup.
I simply got #pinecilv2 - (usb-c solder) from @PINE64, and together with good tip like bc2 (much easier to use) and some good solder wire like #kester to assemble my first mechanical keyboard.
Soldered few #pmw3360 since then as well :)
#omnifixo makes it even easier (but not required)

My whole setup squeezed between two #corne halves:

@arnelson to be fair it's not required nowadays to have that much space or wait for a workstation setup.
I simply got #pinecilv2 - (usb-c solder) from @PINE64, and together with good tip like bc2 (much easier to use) and some good solder wire like #kester to assemble my first mechanical keyboard.
Soldered few #pmw3360 since then as well :)
#omnifixo makes it even easier (but not required)

My whole setup squeezed between two #corne halves:

@arnelson to be fair it's not required nowadays to have that much space or wait for a workstation setup.
I simply got #pinecilv2 - (usb-c solder) from @PINE64, and together with good tip like bc2 (much easier to use) and some good solder wire like #kester to assemble my first mechanical keyboard.
Soldered few #pmw3360 since then as well :)
#omnifixo makes it even easier (but not required)

My whole setup squeezed between two #corne halves:

@arnelson to be fair it's not required nowadays to have that much space or wait for a workstation setup.
I simply got #pinecilv2 - (usb-c solder) from @PINE64, and together with good tip like bc2 (much easier to use) and some good solder wire like #kester to assemble my first mechanical keyboard.
Soldered few #pmw3360 since then as well :)
#omnifixo makes it even easier (but not required)

My whole setup squeezed between two #corne halves:

@arnelson to be fair it's not required nowadays to have that much space or wait for a workstation setup.
I simply got #pinecilv2 - (usb-c solder) from @PINE64, and together with good tip like bc2 (much easier to use) and some good solder wire like #kester to assemble my first mechanical keyboard.
Soldered few #pmw3360 since then as well :)
#omnifixo makes it even easier (but not required)

My whole setup squeezed between two #corne halves:

@robertklep @andy_warb #3sprinting stuff for #omnifixo

@robertklep @andy_warb #3sprinting stuff for #omnifixo

@robertklep @andy_warb #3sprinting stuff for #omnifixo

@robertklep @andy_warb #3sprinting stuff for #omnifixo

@robertklep @andy_warb #3sprinting stuff for #omnifixo

Finally got my hands on an #omnifixo and I can definitely say it’s worth EVERY penny! No more supporting PCBs with Blutac for me!

Finally got my hands on an #omnifixo and I can definitely say it’s worth EVERY penny! No more supporting PCBs with Blutac for me!

Finally got my hands on an #omnifixo and I can definitely say it’s worth EVERY penny! No more supporting PCBs with Blutac for me!

Finally got my hands on an #omnifixo and I can definitely say it’s worth EVERY penny! No more supporting PCBs with Blutac for me!

Finally got my hands on an #omnifixo and I can definitely say it’s worth EVERY penny! No more supporting PCBs with Blutac for me!

@chaos_fl Interessant, schaue ich mir mal an. Privat nutze ich #omnifixo https://omnifixo.com/ (ist allerdings nicht ganz billig)

@chaos_fl Interessant, schaue ich mir mal an. Privat nutze ich #omnifixo https://omnifixo.com/ (ist allerdings nicht ganz billig)

@chaos_fl Interessant, schaue ich mir mal an. Privat nutze ich #omnifixo https://omnifixo.com/ (ist allerdings nicht ganz billig)

@chaos_fl Interessant, schaue ich mir mal an. Privat nutze ich #omnifixo https://omnifixo.com/ (ist allerdings nicht ganz billig)

@chaos_fl Interessant, schaue ich mir mal an. Privat nutze ich #omnifixo https://omnifixo.com/ (ist allerdings nicht ganz billig)

Got myself a new toy. Let's see if the hype is warranted. #omnifixo

Got myself a new toy. Let's see if the hype is warranted. #omnifixo

Got myself a new toy. Let's see if the hype is warranted. #omnifixo

Got myself a new toy. Let's see if the hype is warranted. #omnifixo

Got myself a new toy. Let's see if the hype is warranted. #omnifixo

@omgitsmishenka ну этому конца и края нет. У меня он есть, и даже #omnifixo взял, но теперь пытаюсь смоделировать выдувку из ноктуа 120, и чтоб все от одного USBC :)

@omgitsmishenka ну этому конца и края нет. У меня он есть, и даже #omnifixo взял, но теперь пытаюсь смоделировать выдувку из ноктуа 120, и чтоб все от одного USBC :)

@omgitsmishenka ну этому конца и края нет. У меня он есть, и даже #omnifixo взял, но теперь пытаюсь смоделировать выдувку из ноктуа 120, и чтоб все от одного USBC :)

@omgitsmishenka ну этому конца и края нет. У меня он есть, и даже #omnifixo взял, но теперь пытаюсь смоделировать выдувку из ноктуа 120, и чтоб все от одного USBC :)

@omgitsmishenka ну этому конца и края нет. У меня он есть, и даже #omnifixo взял, но теперь пытаюсь смоделировать выдувку из ноктуа 120, и чтоб все от одного USBC :)

@0xZogG #omnifixo is one of the best purchases I've ever made 😍

@0xZogG #omnifixo is one of the best purchases I've ever made 😍

@0xZogG #omnifixo is one of the best purchases I've ever made 😍

@0xZogG #omnifixo is one of the best purchases I've ever made 😍

@0xZogG #omnifixo is one of the best purchases I've ever made 😍

Noice!
#soldering #omnifixo

Noice!
#soldering #omnifixo

Noice!
#soldering #omnifixo

Noice!
#soldering #omnifixo

Noice!
#soldering #omnifixo

@PistonPin Great idea!I'm looking forward to a real life picture.

If you want to nerd out on third hands... #omnifixo
https://omnifixo.com/