#noisesynth — Public Fediverse posts

@SrRochardBunson @fstateaudio @benda @Noahharvey @[email protected]

https://toobnix.org/w/4XFu1ry9uUghfgowiB5tHo

since it didn't archive (did it actually air live?)
#noiseTherapy #ZhenHouseZhenBonkwave #programmingTalk #noiseSynth #drone #lambdaMOO #podcast #archive #peertube

@SrRochardBunson @fstateaudio @benda @Noahharvey @[email protected]

https://toobnix.org/w/4XFu1ry9uUghfgowiB5tHo

since it didn't archive (did it actually air live?)
#noiseTherapy #ZhenHouseZhenBonkwave #programmingTalk #noiseSynth #drone #lambdaMOO #podcast #archive #peertube

@SrRochardBunson @fstateaudio @benda @Noahharvey @[email protected]

https://toobnix.org/w/4XFu1ry9uUghfgowiB5tHo

since it didn't archive (did it actually air live?)
#noiseTherapy #ZhenHouseZhenBonkwave #programmingTalk #noiseSynth #drone #lambdaMOO #podcast #archive #peertube

@SrRochardBunson @fstateaudio @benda @Noahharvey @[email protected]

https://toobnix.org/w/4XFu1ry9uUghfgowiB5tHo

since it didn't archive (did it actually air live?)
#noiseTherapy #ZhenHouseZhenBonkwave #programmingTalk #noiseSynth #drone #lambdaMOO #podcast #archive #peertube

@SrRochardBunson @fstateaudio @benda @Noahharvey @[email protected]

https://toobnix.org/w/4XFu1ry9uUghfgowiB5tHo

since it didn't archive (did it actually air live?)
#noiseTherapy #ZhenHouseZhenBonkwave #programmingTalk #noiseSynth #drone #lambdaMOO #podcast #archive #peertube

I hope lots of people order, and I’m pretty broke right now, so I can’t afford to buy the parts if they do. I will cover @shopify s fees.

The kits are €35, by the way.

Oh—if you already have one – donate! Tell your friends! Buy one as a gift! Share!

https://noise.technology/shop.html

https://disarmamentsolutions.com/ukraine/donate

https://noise.technology/diypcbsnr.html

#radicalchip #synthdiy #ukraine #sdiy #noisemusic #noisemusic #soundart #experimentalmusic #synth #pcb #pcbartwork #silkscreen #harshnoise #noisesynth #noiseculture

I hope lots of people order, and I’m pretty broke right now, so I can’t afford to buy the parts if they do. I will cover @shopify s fees.

The kits are €35, by the way.

Oh—if you already have one – donate! Tell your friends! Buy one as a gift! Share!

https://noise.technology/shop.html

https://disarmamentsolutions.com/ukraine/donate

https://noise.technology/diypcbsnr.html

#radicalchip #synthdiy #ukraine #sdiy #noisemusic #noisemusic #soundart #experimentalmusic #synth #pcb #pcbartwork #silkscreen #harshnoise #noisesynth #noiseculture

I hope lots of people order, and I’m pretty broke right now, so I can’t afford to buy the parts if they do. I will cover @shopify s fees.

The kits are €35, by the way.

Oh—if you already have one – donate! Tell your friends! Buy one as a gift! Share!

https://noise.technology/shop.html

https://disarmamentsolutions.com/ukraine/donate

https://noise.technology/diypcbsnr.html

#radicalchip #synthdiy #ukraine #sdiy #noisemusic #noisemusic #soundart #experimentalmusic #synth #pcb #pcbartwork #silkscreen #harshnoise #noisesynth #noiseculture

I hope lots of people order, and I’m pretty broke right now, so I can’t afford to buy the parts if they do. I will cover @shopify s fees.

The kits are €35, by the way.

Oh—if you already have one – donate! Tell your friends! Buy one as a gift! Share!

https://noise.technology/shop.html

https://disarmamentsolutions.com/ukraine/donate

https://noise.technology/diypcbsnr.html

#radicalchip #synthdiy #ukraine #sdiy #noisemusic #noisemusic #soundart #experimentalmusic #synth #pcb #pcbartwork #silkscreen #harshnoise #noisesynth #noiseculture

I hope lots of people order, and I’m pretty broke right now, so I can’t afford to buy the parts if they do. I will cover @shopify s fees.

The kits are €35, by the way.

Oh—if you already have one – donate! Tell your friends! Buy one as a gift! Share!

https://noise.technology/shop.html

https://disarmamentsolutions.com/ukraine/donate

https://noise.technology/diypcbsnr.html

#radicalchip #synthdiy #ukraine #sdiy #noisemusic #noisemusic #soundart #experimentalmusic #synth #pcb #pcbartwork #silkscreen #harshnoise #noisesynth #noiseculture

Available now from #METSÄÄN.

DIRTY DRONE DELUGE - a shadow modulated 4step sequencer with delay/distortion

This machine is named Dirty Drone Deluge, because the sequenzer is flooding the delay for a flood of sounds. It’s enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the ‘burnt out industry’ camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (Light Dependent Resistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section’s signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included. Handmade by grm for METSÄÄN.

https://metsn.tumblr.com/post/703619285934899200

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

Available now from #METSÄÄN.

DIRTY DRONE DELUGE - a shadow modulated 4step sequencer with delay/distortion

This machine is named Dirty Drone Deluge, because the sequenzer is flooding the delay for a flood of sounds. It’s enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the ‘burnt out industry’ camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (Light Dependent Resistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section’s signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included. Handmade by grm for METSÄÄN.

https://metsn.tumblr.com/post/703619285934899200

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

Available now from #METSÄÄN.

DIRTY DRONE DELUGE - a shadow modulated 4step sequencer with delay/distortion

This machine is named Dirty Drone Deluge, because the sequenzer is flooding the delay for a flood of sounds. It’s enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the ‘burnt out industry’ camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (Light Dependent Resistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section’s signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included. Handmade by grm for METSÄÄN.

https://metsn.tumblr.com/post/703619285934899200

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

Available now from #METSÄÄN.

DIRTY DRONE DELUGE - a shadow modulated 4step sequencer with delay/distortion

This machine is named Dirty Drone Deluge, because the sequenzer is flooding the delay for a flood of sounds. It’s enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the ‘burnt out industry’ camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (Light Dependent Resistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section’s signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included. Handmade by grm for METSÄÄN.

https://metsn.tumblr.com/post/703619285934899200

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

Available now from #METSÄÄN.

DIRTY DRONE DELUGE - a shadow modulated 4step sequencer with delay/distortion

This machine is named Dirty Drone Deluge, because the sequenzer is flooding the delay for a flood of sounds. It’s enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the ‘burnt out industry’ camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (Light Dependent Resistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section’s signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included. Handmade by grm for METSÄÄN.

https://metsn.tumblr.com/post/703619285934899200

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

Available now from #METSÄÄN.

DIRTY DRONE DELUGE - a shadow modulated 4step sequencer with delay/distortion

This machine is named Dirty Drone Deluge, because the sequenzer is flooding the delay for a flood of sounds. It’s enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the ‘burnt out industry’ camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (Light Dependent Resistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section’s signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included. Handmade by grm for METSÄÄN.

https://metsn.tumblr.com/post/703619285934899200

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

Available now from #METSÄÄN.

DIRTY DRONE DELUGE - a shadow modulated 4step sequencer with delay/distortion

This machine is named Dirty Drone Deluge, because the sequenzer is flooding the delay for a flood of sounds. It’s enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the ‘burnt out industry’ camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (Light Dependent Resistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section’s signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included. Handmade by grm for METSÄÄN.

https://metsn.tumblr.com/post/703619285934899200

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

Available now from #METSÄÄN.

DIRTY DRONE DELUGE - a shadow modulated 4step sequencer with delay/distortion

This machine is named Dirty Drone Deluge, because the sequenzer is flooding the delay for a flood of sounds. It’s enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the ‘burnt out industry’ camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (Light Dependent Resistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section’s signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included. Handmade by grm for METSÄÄN.

https://metsn.tumblr.com/post/703619285934899200

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

Available soon. Stay detuned.

This machine is named Dirty Drone Deluge, because the sequenzer is flooding the delay for a flood of sounds. It's enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the 'burnt out industry' camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (LightDependendResistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section's signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included.

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

https://youtu.be/2_ovzP2puw8

Available soon. Stay detuned.

This machine is named Dirty Drone Deluge, because the sequenzer is flooding the delay for a flood of sounds. It's enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the 'burnt out industry' camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (LightDependendResistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section's signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included.

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

https://youtu.be/2_ovzP2puw8

Available soon. Stay detuned.

This machine is named Dirty Drone Deluge, because the sequenzer is flooding the delay for a flood of sounds. It's enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the 'burnt out industry' camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (LightDependendResistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section's signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included.

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

https://youtu.be/2_ovzP2puw8

Available soon. Stay detuned.

This machine is named Dirty Drone Deluge, because the sequenzer is flooding the delay for a flood of sounds. It's enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the 'burnt out industry' camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (LightDependendResistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section's signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included.

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

https://youtu.be/2_ovzP2puw8

Testing the new #METSÄÄN MACHINE the first #DirtyDroneDeluge with a light controlled 4 step sequencer running through an #Echoblender delay/distortion section. In this clip the output signal also runs through heavy reverb, the unnatural habitat of it's sound. Each step has individual frequency control and a toggle switch that selects two different ways of how the LDR (light dependent reaistor) affects the pitch of the step. A SPEED control makes it go fast or slow. The sequencer runs on an algorythm, that adds very slight variations to the flow. The machine runs on standard 9V DC pedal power supplies (boss-style, center negative). PSU not included. Abailable soon. DM if interested. Stay detuned.

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade

https://www.instagram.com/tv/ClrtdzAAGju

Testing the new #METSÄÄN MACHINE the first #DirtyDroneDeluge with a light controlled 4 step sequencer running through an #Echoblender delay/distortion section. In this clip the output signal also runs through heavy reverb, the unnatural habitat of it's sound. Each step has individual frequency control and a toggle switch that selects two different ways of how the LDR (light dependent reaistor) affects the pitch of the step. A SPEED control makes it go fast or slow. The sequencer runs on an algorythm, that adds very slight variations to the flow. The machine runs on standard 9V DC pedal power supplies (boss-style, center negative). PSU not included. Abailable soon. DM if interested. Stay detuned.

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade

https://www.instagram.com/tv/ClrtdzAAGju

Testing the new #METSÄÄN MACHINE the first #DirtyDroneDeluge with a light controlled 4 step sequencer running through an #Echoblender delay/distortion section. In this clip the output signal also runs through heavy reverb, the unnatural habitat of it's sound. Each step has individual frequency control and a toggle switch that selects two different ways of how the LDR (light dependent reaistor) affects the pitch of the step. A SPEED control makes it go fast or slow. The sequencer runs on an algorythm, that adds very slight variations to the flow. The machine runs on standard 9V DC pedal power supplies (boss-style, center negative). PSU not included. Abailable soon. DM if interested. Stay detuned.

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade

https://www.instagram.com/tv/ClrtdzAAGju

New one off build in the making. 4 step sequencer (appreciator!) with light controlled frequency variations running through an echoblender distortion/delay. This machine is for real dirty oldschool sci-fi junk noise needs. Still have to try it with massive reverberation space clouds.

ignore:
#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #synth #syntesizer #analogsynth #experiemntalelectronic #electronicmusic #experimentalmusicinstrument #sounddesign #sounddesigner #cinematicsound

New one off build in the making. 4 step sequencer (appreciator!) with light controlled frequency variations running through an echoblender distortion/delay. This machine is for real dirty oldschool sci-fi junk noise needs. Still have to try it with massive reverberation space clouds.

ignore:
#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #synth #syntesizer #analogsynth #experiemntalelectronic #electronicmusic #experimentalmusicinstrument #sounddesign #sounddesigner #cinematicsound

New one off build in the making. 4 step sequencer (appreciator!) with light controlled frequency variations running through an echoblender distortion/delay. This machine is for real dirty oldschool sci-fi junk noise needs. Still have to try it with massive reverberation space clouds.

ignore:
#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #synth #syntesizer #analogsynth #experiemntalelectronic #electronicmusic #experimentalmusicinstrument #sounddesign #sounddesigner #cinematicsound

New one off build in the making. 4 step sequencer (appreciator!) with light controlled frequency variations running through an echoblender distortion/delay. This machine is for real dirty oldschool sci-fi junk noise needs. Still have to try it with massive reverberation space clouds.

ignore:
#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #synth #syntesizer #analogsynth #experiemntalelectronic #electronicmusic #experimentalmusicinstrument #sounddesign #sounddesigner #cinematicsound

New one off build in the making. 4 step sequencer (appreciator!) with light controlled frequency variations running through an echoblender distortion/delay. This machine is for real dirty oldschool sci-fi junk noise needs. Still have to try it with massive reverberation space clouds.

ignore:
#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #synth #syntesizer #analogsynth #experiemntalelectronic #electronicmusic #experimentalmusicinstrument #sounddesign #sounddesigner #cinematicsound