#nextruder — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #nextruder, aggregated by home.social.
-
Changed the nozzle on my MK4S for the first time. It sucked. I see why people recommend buying a whole nozzle assembly.
Use the hotend grabber thing that Prusa provides and get yourself a tiny adjustable wrench. You will never get a used nozzle clean enough to fit a standard 7 mm wrench and you do not want to use pliers for this.
Some contorting and misery later, the old nozzle is out and the new nozzle is in.
It is not a tool-free process by any means. I couldn't even screw the new nozzle in by hand. So use a wrench but be careful I guess. I can definitely see messing up the threads in the heater block.
Sorry, but Bambu wins on this front. You can definitely mess that up (you can get the latch to close even when the nozzle isn't seated right), but it takes 2 minutes.
-
Changed the nozzle on my MK4S for the first time. It sucked. I see why people recommend buying a whole nozzle assembly.
Use the hotend grabber thing that Prusa provides and get yourself a tiny adjustable wrench. You will never get a used nozzle clean enough to fit a standard 7 mm wrench and you do not want to use pliers for this.
Some contorting and misery later, the old nozzle is out and the new nozzle is in.
It is not a tool-free process by any means. I couldn't even screw the new nozzle in by hand. So use a wrench but be careful I guess. I can definitely see messing up the threads in the heater block.
Sorry, but Bambu wins on this front. You can definitely mess that up (you can get the latch to close even when the nozzle isn't seated right), but it takes 2 minutes.
-
Changed the nozzle on my MK4S for the first time. It sucked. I see why people recommend buying a whole nozzle assembly.
Use the hotend grabber thing that Prusa provides and get yourself a tiny adjustable wrench. You will never get a used nozzle clean enough to fit a standard 7 mm wrench and you do not want to use pliers for this.
Some contorting and misery later, the old nozzle is out and the new nozzle is in.
It is not a tool-free process by any means. I couldn't even screw the new nozzle in by hand. So use a wrench but be careful I guess. I can definitely see messing up the threads in the heater block.
Sorry, but Bambu wins on this front. You can definitely mess that up (you can get the latch to close even when the nozzle isn't seated right), but it takes 2 minutes.
-
Changed the nozzle on my MK4S for the first time. It sucked. I see why people recommend buying a whole nozzle assembly.
Use the hotend grabber thing that Prusa provides and get yourself a tiny adjustable wrench. You will never get a used nozzle clean enough to fit a standard 7 mm wrench and you do not want to use pliers for this.
Some contorting and misery later, the old nozzle is out and the new nozzle is in.
It is not a tool-free process by any means. I couldn't even screw the new nozzle in by hand. So use a wrench but be careful I guess. I can definitely see messing up the threads in the heater block.
Sorry, but Bambu wins on this front. You can definitely mess that up (you can get the latch to close even when the nozzle isn't seated right), but it takes 2 minutes.
-
Changed the nozzle on my MK4S for the first time. It sucked. I see why people recommend buying a whole nozzle assembly.
Use the hotend grabber thing that Prusa provides and get yourself a tiny adjustable wrench. You will never get a used nozzle clean enough to fit a standard 7 mm wrench and you do not want to use pliers for this.
Some contorting and misery later, the old nozzle is out and the new nozzle is in.
It is not a tool-free process by any means. I couldn't even screw the new nozzle in by hand. So use a wrench but be careful I guess. I can definitely see messing up the threads in the heater block.
Sorry, but Bambu wins on this front. You can definitely mess that up (you can get the latch to close even when the nozzle isn't seated right), but it takes 2 minutes.
-
Found a #Nextruder reinforced main plate that I printed in the past from PC. Pretty good quality.
-
Kennt sich hier wer mit dem Prusa Nextruder aus und kann mir erklären, wie ich die Nozzle tausche?
Ich habe diese Anleitung gefunden:
https://help.prusa3d.com/guide/how-to-replace-the-prusa-nozzle-core-one-l_934733
Allerdings dachte ich, dass der Tausch beim Nextruder einfacher wäre. 🤔
EDIT: ich denke, mit diesem Video komme ich klar: https://www.youtube.com/watch?v=X1sxxiHaKmo
-
Kennt sich hier wer mit dem Prusa Nextruder aus und kann mir erklären, wie ich die Nozzle tausche?
Ich habe diese Anleitung gefunden:
https://help.prusa3d.com/guide/how-to-replace-the-prusa-nozzle-core-one-l_934733
Allerdings dachte ich, dass der Tausch beim Nextruder einfacher wäre. 🤔
EDIT: ich denke, mit diesem Video komme ich klar: https://www.youtube.com/watch?v=X1sxxiHaKmo
-
I published a thing on Printables. This is a fix to Prusa's MK4 nozzle changing tool that makes it easier to remove from the hotend.
https://www.printables.com/model/1059648-easy-remove-mk4-nozzle-replacement-tool
-
I published a thing on Printables. This is a fix to Prusa's MK4 nozzle changing tool that makes it easier to remove from the hotend.
https://www.printables.com/model/1059648-easy-remove-mk4-nozzle-replacement-tool
-
I published a thing on Printables. This is a fix to Prusa's MK4 nozzle changing tool that makes it easier to remove from the hotend.
https://www.printables.com/model/1059648-easy-remove-mk4-nozzle-replacement-tool
-
I published a thing on Printables. This is a fix to Prusa's MK4 nozzle changing tool that makes it easier to remove from the hotend.
https://www.printables.com/model/1059648-easy-remove-mk4-nozzle-replacement-tool
-
I published a thing on Printables. This is a fix to Prusa's MK4 nozzle changing tool that makes it easier to remove from the hotend.
https://www.printables.com/model/1059648-easy-remove-mk4-nozzle-replacement-tool
-
@uko Nice, I need that 0,6 nozzle too! I just had some problems with broken filament. I was able to get it out, but the extruder made rattling noises when trying to load new filament. Molten filament inside the metal tube clogged it and cold pulls did not help. Prusa support even offered a replacement, but at last I was able to clear it with a heat gun and that Noclogger tool.
The new hotend design without the PTFE tube is nice, but cleaning seems to be a really hard task #prusamk4 #nextruder
-
@uko Nice, I need that 0,6 nozzle too! I just had some problems with broken filament. I was able to get it out, but the extruder made rattling noises when trying to load new filament. Molten filament inside the metal tube clogged it and cold pulls did not help. Prusa support even offered a replacement, but at last I was able to clear it with a heat gun and that Noclogger tool.
The new hotend design without the PTFE tube is nice, but cleaning seems to be a really hard task #prusamk4 #nextruder
-
For those that use #OctoPrint, how many of you would love to have a #plugin that allows you to configure several settings relative to your Nozzle and/or Hotends?
Now that swappable Nozzles and Hotends are a thing; it seems like it would be nice to adjust temp settings on the fly.
/cc @octoprint
@layers#OctoPi #OctoPrint #3dPrinting
#E3d #Revo6 #NozzleX #Obxidian
#Maker
#WhamBam #Mutant
#Prusa #Nextruder
#3DPrintingNerd #JoeTelling
#MakersMuse #AngusDeveson
#FilamentStories #CourtneyBlum -
For those that use #OctoPrint, how many of you would love to have a #plugin that allows you to configure several settings relative to your Nozzle and/or Hotends?
Now that swappable Nozzles and Hotends are a thing; it seems like it would be nice to adjust temp settings on the fly.
/cc @octoprint
@layers#OctoPi #OctoPrint #3dPrinting
#E3d #Revo6 #NozzleX #Obxidian
#Maker
#WhamBam #Mutant
#Prusa #Nextruder
#3DPrintingNerd #JoeTelling
#MakersMuse #AngusDeveson
#FilamentStories #CourtneyBlum -
For those that use #OctoPrint, how many of you would love to have a #plugin that allows you to configure several settings relative to your Nozzle and/or Hotends?
Now that swappable Nozzles and Hotends are a thing; it seems like it would be nice to adjust temp settings on the fly.
/cc @octoprint
@layers#OctoPi #OctoPrint #3dPrinting
#E3d #Revo6 #NozzleX #Obxidian
#Maker
#WhamBam #Mutant
#Prusa #Nextruder
#3DPrintingNerd #JoeTelling
#MakersMuse #AngusDeveson
#FilamentStories #CourtneyBlum -
For those that use #OctoPrint, how many of you would love to have a #plugin that allows you to configure several settings relative to your Nozzle and/or Hotends?
Now that swappable Nozzles and Hotends are a thing; it seems like it would be nice to adjust temp settings on the fly.
/cc @octoprint
@layers#OctoPi #OctoPrint #3dPrinting
#E3d #Revo6 #NozzleX #Obxidian
#Maker
#WhamBam #Mutant
#Prusa #Nextruder
#3DPrintingNerd #JoeTelling
#MakersMuse #AngusDeveson
#FilamentStories #CourtneyBlum -
For those that use #OctoPrint, how many of you would love to have a #plugin that allows you to configure several settings relative to your Nozzle and/or Hotends?
Now that swappable Nozzles and Hotends are a thing; it seems like it would be nice to adjust temp settings on the fly.
/cc @octoprint
@layers#OctoPi #OctoPrint #3dPrinting
#E3d #Revo6 #NozzleX #Obxidian
#Maker
#WhamBam #Mutant
#Prusa #Nextruder
#3DPrintingNerd #JoeTelling
#MakersMuse #AngusDeveson
#FilamentStories #CourtneyBlum