#nextcloudpi — Public Fediverse posts

I am using Nextcloud 32.0.11.1 on Armbian (bookworm based) running on bare metal - no docker. The nextcloud service HPB is down, the AI workers are disabled.
I don't care about "HPB down" because everything I need just works.

An update to trixie (successor to bookworm) is offered via the command

'sudo ncp-dist-upgrade'

I have read some bad stories about the migration from bookworm to trixe like
replaced "cron" by systemd/timed" etc.

What is the experience of other users in this environment after the update ?
Do I have to fix the "HPB down" problem prior to the update ?
DO I have to enable the 5 AI services prior to the update ?

#nextcloud #nextcloudpi #armbian #fedihelp #bookworm #trixie

@grauzone
Vielen Dank für die Warnung. Normalerweise mache ich keine Armbian Updates, sondern überlasse das dem #nextcloudpi Update. Wollte mich diesen Sommer aber auch mal ein bisschen "emanzipieren" und Armbian die neuen Dateien selbst spendieren. Aber ich hab weder Lust Aug Letsencrypt Basteleien, noch auf den anderen Quark. Hatte ich alles, deshalb bin ich auf NCP umgestiegen.
Ich drücke dir die Daumen!

@grauzone
Vielen Dank für die Warnung. Normalerweise mache ich keine Armbian Updates, sondern überlasse das dem #nextcloudpi Update. Wollte mich diesen Sommer aber auch mal ein bisschen "emanzipieren" und Armbian die neuen Dateien selbst spendieren. Aber ich hab weder Lust Aug Letsencrypt Basteleien, noch auf den anderen Quark. Hatte ich alles, deshalb bin ich auf NCP umgestiegen.
Ich drücke dir die Daumen!

Heute ein Update von Armbian gemacht. Danach: SSL error wegen "certificate stapling - no longer supported" von letsencrypt. Anpassung an ssl Conf nötig. Leider nun wieder die katastrophale Fehlermeldung "HPB Service: down'.
Eine meiner liebsten Fehlermeldung. Gibt es keine Doku zu den Ursachen oder was alles klappen muss, damit der Service auf "up" stellt ?
Ich wünsche keinem Nextcloud supporter diese geniale Fehlermeldung. Nein, kein Eintrag dazu im nextcloud.log.
#nextcloud #nextcloudpi #HPB #letsencrypt #armbian

Heute ein Update von Armbian gemacht. Danach: SSL error wegen "certificate stapling - no longer supported" von letsencrypt. Anpassung an ssl Conf nötig. Leider nun wieder die katastrophale Fehlermeldung "HPB Service: down'.
Eine meiner liebsten Fehlermeldung. Gibt es keine Doku zu den Ursachen oder was alles klappen muss, damit der Service auf "up" stellt ?
Ich wünsche keinem Nextcloud supporter diese geniale Fehlermeldung. Nein, kein Eintrag dazu im nextcloud.log.
#nextcloud #nextcloudpi #HPB #letsencrypt #armbian

I spent some time last night rebuilding my #NextcloudPi so that it would use the USB drive for storage - a silly mistake I was keen to fix.

Managed to figure that out and was quite impressed with the UX, but sadly I was unable to connect to it this morning. After a bit of thought, I think I figured out where I went wrong, and am keen to rebuild it later today.

With me taking a couple of days off work, nice to be doing some computering for myself.

I spent some time last night rebuilding my #NextcloudPi so that it would use the USB drive for storage - a silly mistake I was keen to fix.

Managed to figure that out and was quite impressed with the UX, but sadly I was unable to connect to it this morning. After a bit of thought, I think I figured out where I went wrong, and am keen to rebuild it later today.

With me taking a couple of days off work, nice to be doing some computering for myself.

NextcloudPi ist weiterhin ein tolles Projekt:

- Nur SD-Karte/USB-Stick mit dem Image versehen. Fertig. Sofort kann die neueste (Winter-)Version im Browser aufgerufen werden - ohne dass man SSH bemühen oder Datenbanken konfigurieren müsste.

- "riesiges" Verwaltungsbackend:
Einhängen von Speichermedien, automatisierte Backups und Updates (auch der Datenbanken), SSH, Samba, NFS, Formatierung von USB-Medien, fail2ban, DNS-Verwaltung, https ...

#nextcloud #nextcloudpi #raspberrypi

NextcloudPi ist weiterhin ein tolles Projekt:

- Nur SD-Karte/USB-Stick mit dem Image versehen. Fertig. Sofort kann die neueste (Winter-)Version im Browser aufgerufen werden - ohne dass man SSH bemühen oder Datenbanken konfigurieren müsste.

- "riesiges" Verwaltungsbackend:
Einhängen von Speichermedien, automatisierte Backups und Updates (auch der Datenbanken), SSH, Samba, NFS, Formatierung von USB-Medien, fail2ban, DNS-Verwaltung, https ...

#nextcloud #nextcloudpi #raspberrypi

Last update to nextcloudpi version 1.57.0 destroyed my valid, not self-signed certificate (from letsencrypt) and now it is using this invalid certificate for all clients !
I replaced the "snake-oil" certificate with the correct one in the apache2 settings but each client still complains about this certificate and needs an exception.
Yes, I restarted apache2 and there is no visible problem on the server.
Do I have to reboot the server in order to get the correct certificates into the clients ?
Any hints ?
#nextcloudpi #nextcloud #fedihelp

Last update to nextcloudpi version 1.57.0 destroyed my valid, not self-signed certificate (from letsencrypt) and now it is using this invalid certificate for all clients !
I replaced the "snake-oil" certificate with the correct one in the apache2 settings but each client still complains about this certificate and needs an exception.
Yes, I restarted apache2 and there is no visible problem on the server.
Do I have to reboot the server in order to get the correct certificates into the clients ?
Any hints ?
#nextcloudpi #nextcloud #fedihelp

#Nextcloudpi 1.57.0 is out, bringing #Nextcloud 33 + some improvements.

Notably:

Manual and automatic NC updates will now check for enabled Nextcloud apps that are incompatible with the new version and abort if any are found.
This can be disabled from the #ncp web interface (under nc-update-nextcloud/nc-autoupdate-nc) and is enabled by default.

The custom and outdated fork of previewgenerator has been dropped in favor of the latest upstream version.

https://github.com/nextcloud/nextcloudpi/releases/tag/v1.57.0

#Nextcloudpi 1.57.0 is out, bringing #Nextcloud 33 + some improvements.

Notably:

Manual and automatic NC updates will now check for enabled Nextcloud apps that are incompatible with the new version and abort if any are found.
This can be disabled from the #ncp web interface (under nc-update-nextcloud/nc-autoupdate-nc) and is enabled by default.

The custom and outdated fork of previewgenerator has been dropped in favor of the latest upstream version.

https://github.com/nextcloud/nextcloudpi/releases/tag/v1.57.0

Considering to migrate my RBPi5 from #NextCloudPi to #Yunohost. My Nextcloud data directory is on an SSD, the system boots from MicroSD. Can I just boot Yunohost, install Nextcloud, point it to my SSD and trigger file indexing? Or is that a bad idea and needs further prep?

#selfhost #selfhosting #nextcloud

Considering to migrate my RBPi5 from #NextCloudPi to #Yunohost. My Nextcloud data directory is on an SSD, the system boots from MicroSD. Can I just boot Yunohost, install Nextcloud, point it to my SSD and trigger file indexing? Or is that a bad idea and needs further prep?

#selfhost #selfhosting #nextcloud

Все про себя, да про себя. Серверные системы и платформы для управления приложениями — еще один шаг в тему селф-хостинга

В целом для запуска домашней лаборатории достаточно взять любой Linux-дистрибутив по нраву. Понадобилось поработать с NAS-сервером — выбрал Unraid; захотелось чего-то для встраиваемых систем — обратился к Alpine. Селф-хостинг позволяет опробовать разное, даже экспериментальное программное обеспечение. Сегодня мы в

https://habr.com/ru/companies/beeline_cloud/articles/981274/

#beeline_cloud #хостинг #домашние_лаборатории #StartOS #SelfHostBlocks #Runtipi #NextCloudPi #Dropserver #селфхостинг

@jcrabapple I am fairly new to selfhosting and only do so locally, but I have been using:

#NextcloudPi - files, notes, music, room temperature, links to lots of things as well as...
#Karakeep - "read it later" articles
#Forgejo - non public repos and work in progress
#Watchtower - to update Forgejo and Karakeep

@jcrabapple I am fairly new to selfhosting and only do so locally, but I have been using:

#NextcloudPi - files, notes, music, room temperature, links to lots of things as well as...
#Karakeep - "read it later" articles
#Forgejo - non public repos and work in progress
#Watchtower - to update Forgejo and Karakeep

@mhier @werawelt @swr3 Woher ich das habe ?
Ich habe #nextcloudpi im Einsatz und da ist bei nextcloud 30.0.x und bookworm "Ende der Fahnenstange".
Ich bekomme weder ein Update für #nextcloudpi noch für #nextcloud angezeigt wie bisher.
Wie machst du denn die Updates ?
Nach den vielen Berichten über Probleme beim Update will ich nicht das "Versuchskaninchen" sein.

@andreas_heitmann
👍
#nextcloudpi auf dem Raspi ist auch für Einsteiger kein großartiges Problem:
https://www.kuketz-blog.de/nextcloud-auf-dem-raspberry-pi-einrichten/

@swr3

I think I am going to move back from #Nextcloud to #nextcloudpi
I have learned a lot about Docker in the process, but I still can't get NextCloud to update properly and I think that the Pi variant is a lot easier to set up.

I think I am going to move back from #Nextcloud to #nextcloudpi
I have learned a lot about Docker in the process, but I still can't get NextCloud to update properly and I think that the Pi variant is a lot easier to set up.

Mal eine Frage in die Linux Runde. Ich habe auf meinem Raspberry Pi 3b #nextcloudpi installiert.

Jedoch kann ich max. 1-2 Minuten sowohl auf Nextcloud als auch via SSH auf den Pi selbst zugreifen. Danach werden alle Verbindungen gekappt. Nach einem Neustart ist die externe URL unter trusted domains in der config.php durch nextcloudpi ersetzt.

Fehlermeldungen in den logs finde ich nichts.

Ich brauch Hilfe 😁

#linux #nextcloudpi #raspberrypi

@nextcloudatomic #nextcloud #nextcloudpi vielleicht für Mike nach der Babypause @kuketzblog interessant, wird (noch) gefördert vom Bundesministerium (D)

A question for #nextcloudpi and #nextcloud AI folks: would adding #hailo 8l to my #rpi5 offer any performance advantage?

A question for #nextcloudpi and #nextcloud AI folks: would adding #hailo 8l to my #rpi5 offer any performance advantage?

@GhostOnTheHalfShell
There is a simple way to have your own data with #NextcloudPI on a Raspberry PI and retrieve it via the internet via DAV and with Nextcloud apps.
Then you are independent of USA-big-corporations and it hardly needs money and only from time to time for an update.
For the security of the connection you could still use VPN.

https://nextcloudpi.com/

https://opensource.com/article/23/3/nextcloudpi-nextcloud-raspberry-pi

@stevel

Finally got back to setting up #Nextcloud on a #RaspberryPi today (using #NextcloudPi), after failing to make it work some months ago.
Turns out I was just one "sudo reboot" away from making it work last time (which I figured out after redoing the entire installation process)...

@jedie @bertagieselbusch @yunohost
Yunohost - einmal probiert, schnell die Finger davon gelassen. Es ist eine immense Aufgabe, alle Applikationen, die nicht für ein "nebeneinander" auf einer Plattform gedacht sind, so umzubauen, dass es passt. Von Updates der einzelnen Applikationen gar nicht zu reden.
Ich verwende daheim einen Odroid-N2+ mit Armbian und #nextcloudpi .
Da braucht es nicht viel Kenntnisse, weil im Text-Menü praktisch alles vorhanden ist, was ein Nextcloud-Admin so braucht.

@nextcloud Use #nextcloudpi and a daily backup feature is included.😃

To inform #nextcloudpi users on #armbian : the latest update obviously sets PHP8.4 as default version for the command-line.
This doesn't work well with #nextcloud as backups won't work ("not compatible with PHP 8.4"). I guess after a reboot the HPB will be down - one of my "favourite" error message☹️ . You have to set the PHP alternative manually back to php-8.3.

sudo update-alternatives --config php

After update from #nextcloudpi to v1.55.2 and subsequently #nextcloud from 28.0.5 to 29.0.4
there are two php-fpm services running:
php8.2-fpm
and
php8.3-fpm

Alternatives show php8.3 in use and "php -v" gives php8.3 as result, too.
So I stopped php8.2-fpm and that didn't harm nextcloud, at all.
After that I disabled the service php8.2-fpm.
I hope this is OK 🤔
The update of #nextcloud to 29.0.4 via #nextcloudpi v1.55.2 did install php8.3 and set it as default resp. alternative.

#Nextcloudpi did it again: the bastards delete ALL PHP8.3-FPM when it did this self-scheduled update, and, get this, who would have thought, amazing, you delete CRITICAL PACKAGES and guess what, the whole machine is instantly crippled!

Now who in all of techdom could have guessed that. Idiots. #Iamnotamused

If your crew is listening, I advise reading "man apt-get". Oh and thank you for ruining another wonderful morning.

Another inexcusable: for what ungodly reason do #NextcloudPi upgrades begin by REMOVING every last one of the php8.x-* packages, whether it uses it or not? The first thing that happens, of course, is the ENTIRE WEBSERVER GOES DOWN crashing the upgrade in an unusable state and taking down all other PHP websites in the process. What possible "engineering necessity" prompts this idiocy?

A secret tip for those devs: apt-get has an "upgrade" option.

Ok, I'll stop griping now. For a while at least.

Gestern Update von #nextcloudpi, das ist gescheitert (notify_push war nicht kompatibel). Dann automatisches Rückspielen des Backups. Seither ist die @nextcloud tot. Die Datenbank wurde nicht zurückgespielt. Händisches Zurückspielen der DB hat gestern zu funktionierender Cloud geführt, heute wieder nur Internal Server Error.
Dabei habe ich mir das Projekt mal gesucht, damit ich mir mit neuem PHP nicht immer _selbst_ die Cloud zerschieße. Also doch wieder zurück zum Selbermachen.
@NextCloudPi

So, I have a #NextCloudPi set up now, but I don't know what to do with it really...
It's not user friendly enough to use at home, and it doesn't add anything to my home that I didn't already have in one way or another...

just discovered (and recovered from) another modern danger: latest auto-upgrade for #Nextcloud via #NextcloudPi involves an SQL import that, with my particular database, exceeded the (rather conservative) default timeouts for #mariadb, and as a result leaves the system bricked!

I learned all about *_timeout settings restoring the backup by hand, because they wouldn't have worked from the ncp panel either.

#homecloud

Hello World! 🌈

The official #nextcloudpi account has been very quiet lately, but I'll intend to change that starting now.

For the time being, expect update information and roadmap updates.

@dusoft This might be exactly what I am looking for to monitor uptime and temperature for my #NextCloudPi . Thank you for sharing.

NextcloudPI (fertiges Image von Nextcloud für Raspberry Pi ) unterstützt inzwischen Nextcloud 28:

"v1.54.0 (2024-05-01) Support Debian 12 and Nextcloud 28.0.5"

https://nextcloudpi.com

#nextcloud #nextcloudpi

New release of @NextCloudPi 🎉

https://github.com/nextcloud/nextcloudpi/releases

#nextcloud #nextcloudpi #pi #foss #opensource

In #Nextcloud (or #NextcloudPi) 27.1, does "Include data" in the Backups copy all of the user Files files? (it says "users' data (calendar, contacts, and other files)" but on a document, audio or video server, that's a whopping overhead)

If it does take all the folders Files, is there some way to backup just the Nextcloud data like calendar entries, RSS-feeds, email-connects, recipies etc or is all that stuff backed up without this option?

Or should I just move my files elsewhere first?

@sn0n

Here's a #nextcloudpi test: if the link works, you should get an mp3 from the big band swing dance last night. Does anyone get shown a download that then won't work? If it does work, does the mp3 skip in your player?

https://nas.teledyn.com/s/Pmx2LQpYkSCP9og