#multimaterial — Public Fediverse posts

3D-Printed electric motor via multi-modal, multi-material extrusion

https://www.tandfonline.com/doi/full/10.1080/17452759.2026.2613185

#HackerNews #3DPrinting #ElectricMotor #MultiMaterial #Innovation #Extrusion #Technology

INDX has an Open Source Slimline Tool changer in Development.

https://youtu.be/941lrKT-fIY?si=XGuuV6pe6NaxXrG6

#OpenSource #3dPrinting #ToolChanger #MultiMaterial #Voron #INDX #Bondtech #Prusa #Sovol #SV08

Multi-material Parts the Easy Way https://hackaday.com/2026/01/10/multi-material-parts-the-easy-way/ #3dPrinterhacks #multimaterial #3dprinting

Multi-material Parts the Easy Way

https://web.brid.gy/r/https://hackaday.com/2026/01/10/multi-material-parts-the-easy-way/

There are some unlikely filament pairings that will make your life much easier if you use them right. Here's what I found works for easily peelable support material and for permanent bonds!
#3DPrinting #MMU #ERCF #AMF #Multimaterial
https://www.youtube.com/watch?v=5VV2fbJ0apg

#Printess: A low-cost #OpenSource 6-axis #3Dprinter for #multimaterial & HT direct #ink writing of soft & living materials:

-2 #syringe #pump #extruders
-cost ~$250

Preprint: https://doi.org/10.1101/2024.10.01.615991
#DIYbio #lab #instruments #bioprinting #hydrogel #multinozzle #MM3D #3Dprinting

#Printess: A low-cost #OpenSource 6-axis #3Dprinter for #multimaterial & HT direct #ink writing of soft & living materials:

-2 #syringe #pump #extruders
-cost ~$250

Preprint: https://doi.org/10.1101/2024.10.01.615991
#DIYbio #lab #instruments #bioprinting #hydrogel #multinozzle #MM3D #3Dprinting

#Printess: A low-cost #OpenSource 6-axis #3Dprinter for #multimaterial & HT direct #ink writing of soft & living materials:

-2 #syringe #pump #extruders
-cost ~$250

Preprint: https://doi.org/10.1101/2024.10.01.615991
#DIYbio #lab #instruments #bioprinting #hydrogel #multinozzle #MM3D #3Dprinting

#Printess: A low-cost #OpenSource 6-axis #3Dprinter for #multimaterial & HT direct #ink writing of soft & living materials:

-2 #syringe #pump #extruders
-cost ~$250

Preprint: https://doi.org/10.1101/2024.10.01.615991
#DIYbio #lab #instruments #bioprinting #hydrogel #multinozzle #MM3D #3Dprinting

#Printess: A low-cost #OpenSource 6-axis #3Dprinter for #multimaterial & HT direct #ink writing of soft & living materials:

-2 #syringe #pump #extruders
-cost ~$250

Preprint: https://doi.org/10.1101/2024.10.01.615991
#DIYbio #lab #instruments #bioprinting #hydrogel #multinozzle #MM3D #3Dprinting

Had to get creative with these hinge covers—ended up using PLA as support material for a PETG print for the first time!

My first attempt failed when the organic supports broke, but the second try worked out well.

I set the bed temp to 60°C and used a small brim around the PETG parts. I also set the organic supports to double walls up to the tips.

Multiple wipe towers would be a big help for these kind of prints!

#3DPrinting #MultiMaterial #PLASupports #PrusaXL

Toolchanging Printers Get a Nozzle Hanky Like No Other - When it comes to toolchanging 3D printers, idle nozzles tend to drool. Cleaning ou... - https://hackaday.com/2021/05/18/toolchanging-printers-get-a-nozzle-hanky-like-no-other/ #3dprinternozzle #3dprinterhacks #nozzlecleaning #multimaterial #toolchanging #toolchanger #3dprinter #news