#magpimonday — Public Fediverse posts

@themagpi I assembled a board I designed last year for the #RP2350 to test using the UART bootloader now I have ICs (from #LCSC).

After modifying the code in the pico-examples PR https://github.com/raspberrypi/pico-examples/pull/571 to suit the hardware I have "blink" working 😁 .

I didn't break out the RUN pin so the Pico can't reset my board but powering it up after the Pico it uploads OK.

#MagPiMonday #MakerMonday

@themagpi I assembled a board I designed last year for the #RP2350 to test using the UART bootloader now I have ICs (from #LCSC).

After modifying the code in the pico-examples PR https://github.com/raspberrypi/pico-examples/pull/571 to suit the hardware I have "blink" working 😁 .

I didn't break out the RUN pin so the Pico can't reset my board but powering it up after the Pico it uploads OK.

#MagPiMonday #MakerMonday

@themagpi I assembled a board I designed last year for the #RP2350 to test using the UART bootloader now I have ICs (from #LCSC).

After modifying the code in the pico-examples PR https://github.com/raspberrypi/pico-examples/pull/571 to suit the hardware I have "blink" working 😁 .

I didn't break out the RUN pin so the Pico can't reset my board but powering it up after the Pico it uploads OK.

#MagPiMonday #MakerMonday

@themagpi I assembled a board I designed last year for the #RP2350 to test using the UART bootloader now I have ICs (from #LCSC).

After modifying the code in the pico-examples PR https://github.com/raspberrypi/pico-examples/pull/571 to suit the hardware I have "blink" working 😁 .

I didn't break out the RUN pin so the Pico can't reset my board but powering it up after the Pico it uploads OK.

#MagPiMonday #MakerMonday

@themagpi I assembled a board I designed last year for the #RP2350 to test using the UART bootloader now I have ICs (from #LCSC).

After modifying the code in the pico-examples PR https://github.com/raspberrypi/pico-examples/pull/571 to suit the hardware I have "blink" working 😁 .

I didn't break out the RUN pin so the Pico can't reset my board but powering it up after the Pico it uploads OK.

#MagPiMonday #MakerMonday

@themagpi I've built up a PCB to support four GY-PCM5102 DACs with a Raspberry Pi 5 and MiniDexed to give 8-channel audio output.

Includes: 4xDACs, SSD1306 display, encoder, buttons, MIDI IN/OUT.

Full details here: https://diyelectromusic.com/2024/06/09/minidexed-quad-dac-pcb-design/

#MagPiMonday #MiniDexed

@themagpi Finishing off my pair of Farnsworth's ( from Warehouse 13 fame.)

They can talk to each other with both audio and video, either both on the same network or externally via a python "Strowger" server (I decided against calling this Exchange) over UDP

Each contain a PI #PicoW a Circular display, microphone, speaker and a camera

Details on the build https://www.extremeelectronics.co.uk/farnsworth-warehouse-13-artifact-creation/

@Raspberry_Pi

#MagPiMonday #rpi #RaspberryPi

@themagpi Hi, I was working on an #8bit sound card project for the #x86 #firewall over #LPCbus. It works fine now and fits in the case. BTW, I'm going to release it soon.

#retrogamig #retrocomputers
#raspberrypipico #RP2040 #pio #opensource #MagPiMonday