#lasercutting — Public Fediverse posts

Mū Tōrere von https://www.thingiverse.com/thing:7367941 #3dprinting und #lasercutting

Mū Tōrere von https://www.thingiverse.com/thing:7367941 #3dprinting und #lasercutting

A while back we went on a road trip ( IL <-> CA ) and took this picture out the front windshield.

We also saw some "Speed limit enforced by aircraft" signs.

Later when going through our photo's, this one was screaming for a #ufo over one of those signs.

So I went and fired up #blender and started modeling a simple UFO and roadsign, then edited them into the picture.

boxes.py has these photo frames you can generate, so that's what we used for #lasercutting a frame, and then a sheet of clear acrylic to use as the glass.

I really like how these turned out!

If you want one (print + frame), grab them here:

* https://photronic.art/product/45

... or here:

* https://photronicarts.etsy.com/listing/4554190429

A while back we went on a road trip ( IL <-> CA ) and took this picture out the front windshield.

We also saw some "Speed limit enforced by aircraft" signs.

Later when going through our photo's, this one was screaming for a #ufo over one of those signs.

So I went and fired up #blender and started modeling a simple UFO and roadsign, then edited them into the picture.

boxes.py has these photo frames you can generate, so that's what we used for #lasercutting a frame, and then a sheet of clear acrylic to use as the glass.

I really like how these turned out!

If you want one (print + frame), grab them here:

* https://photronic.art/product/45

... or here:

* https://photronicarts.etsy.com/listing/4554190429

A while back we went on a road trip ( IL <-> CA ) and took this picture out the front windshield.

We also saw some "Speed limit enforced by aircraft" signs.

Later when going through our photo's, this one was screaming for a #ufo over one of those signs.

So I went and fired up #blender and started modeling a simple UFO and roadsign, then edited them into the picture.

boxes.py has these photo frames you can generate, so that's what we used for #lasercutting a frame, and then a sheet of clear acrylic to use as the glass.

I really like how these turned out!

If you want one (print + frame), grab them here:

* https://photronic.art/product/45

... or here:

* https://photronicarts.etsy.com/listing/4554190429

A while back we went on a road trip ( IL <-> CA ) and took this picture out the front windshield.

We also saw some "Speed limit enforced by aircraft" signs.

Later when going through our photo's, this one was screaming for a #ufo over one of those signs.

So I went and fired up #blender and started modeling a simple UFO and roadsign, then edited them into the picture.

boxes.py has these photo frames you can generate, so that's what we used for #lasercutting a frame, and then a sheet of clear acrylic to use as the glass.

I really like how these turned out!

If you want one (print + frame), grab them here:

* https://photronic.art/product/45

... or here:

* https://photronicarts.etsy.com/listing/4554190429

A while back we went on a road trip ( IL <-> CA ) and took this picture out the front windshield.

We also saw some "Speed limit enforced by aircraft" signs.

Later when going through our photo's, this one was screaming for a #ufo over one of those signs.

So I went and fired up #blender and started modeling a simple UFO and roadsign, then edited them into the picture.

boxes.py has these photo frames you can generate, so that's what we used for #lasercutting a frame, and then a sheet of clear acrylic to use as the glass.

I really like how these turned out!

If you want one (print + frame), grab them here:

* https://photronic.art/product/45

... or here:

* https://photronicarts.etsy.com/listing/4554190429

Spent a little bit of time today commissioning a new fibre laser for my local maker space. #lasercutting #fibre #making

Spent a little bit of time today commissioning a new fibre laser for my local maker space. #lasercutting #fibre #making

Spent a little bit of time today commissioning a new fibre laser for my local maker space. #lasercutting #fibre #making

Spent a little bit of time today commissioning a new fibre laser for my local maker space. #lasercutting #fibre #making

Spent a little bit of time today commissioning a new fibre laser for my local maker space. #lasercutting #fibre #making

And it's live! Generate your own customized vectors for a frame loom here:

https://boxes.hackerspace-bamberg.de/FrameLoom

# weaving #lasercutting #loom

And it's live! Generate your own customized vectors for a frame loom here:

https://boxes.hackerspace-bamberg.de/FrameLoom

# weaving #lasercutting #loom

And it's live! Generate your own customized vectors for a frame loom here:

https://boxes.hackerspace-bamberg.de/FrameLoom

# weaving #lasercutting #loom

And it's live! Generate your own customized vectors for a frame loom here:

https://boxes.hackerspace-bamberg.de/FrameLoom

# weaving #lasercutting #loom

And it's live! Generate your own customized vectors for a frame loom here:

https://boxes.hackerspace-bamberg.de/FrameLoom

# weaving #lasercutting #loom

PR is up if any of y'all want to get weaving:
https://github.com/florianfesti/boxes/pull/946

Note it hasn't been merged yet, so until then you'll need to pull down my branch and run the thing locally.

#weaving #lasercutting #loom

PR is up if any of y'all want to get weaving:
https://github.com/florianfesti/boxes/pull/946

Note it hasn't been merged yet, so until then you'll need to pull down my branch and run the thing locally.

#weaving #lasercutting #loom

PR is up if any of y'all want to get weaving:
https://github.com/florianfesti/boxes/pull/946

Note it hasn't been merged yet, so until then you'll need to pull down my branch and run the thing locally.

#weaving #lasercutting #loom

PR is up if any of y'all want to get weaving:
https://github.com/florianfesti/boxes/pull/946

Note it hasn't been merged yet, so until then you'll need to pull down my branch and run the thing locally.

#weaving #lasercutting #loom

PR is up if any of y'all want to get weaving:
https://github.com/florianfesti/boxes/pull/946

Note it hasn't been merged yet, so until then you'll need to pull down my branch and run the thing locally.

#weaving #lasercutting #loom

I finally parametrized my rotating-heddle frame loom on Thingiverse so that I could make it an arbitrary size. So now I have a mini bracelet loom :)

I still need to clean up the code, and then I'll submit a PR to https://boxes.hackerspace-bamberg.de/

#lasercutting #weaving #loom #crafts

I finally parametrized my rotating-heddle frame loom on Thingiverse so that I could make it an arbitrary size. So now I have a mini bracelet loom :)

I still need to clean up the code, and then I'll submit a PR to https://boxes.hackerspace-bamberg.de/

#lasercutting #weaving #loom #crafts

I finally parametrized my rotating-heddle frame loom on Thingiverse so that I could make it an arbitrary size. So now I have a mini bracelet loom :)

I still need to clean up the code, and then I'll submit a PR to https://boxes.hackerspace-bamberg.de/

#lasercutting #weaving #loom #crafts

I finally parametrized my rotating-heddle frame loom on Thingiverse so that I could make it an arbitrary size. So now I have a mini bracelet loom :)

I still need to clean up the code, and then I'll submit a PR to https://boxes.hackerspace-bamberg.de/

#lasercutting #weaving #loom #crafts

I finally parametrized my rotating-heddle frame loom on Thingiverse so that I could make it an arbitrary size. So now I have a mini bracelet loom :)

I still need to clean up the code, and then I'll submit a PR to https://boxes.hackerspace-bamberg.de/

#lasercutting #weaving #loom #crafts

And my favorite from Teardown needs video for the animation, by https://www.instagram.com/alicenlewis/ + https://www.instagram.com/cantfocus

#teardown2026 #laserCutting #LEDs

And my favorite from Teardown needs video for the animation, by https://www.instagram.com/alicenlewis/ + https://www.instagram.com/cantfocus

#teardown2026 #laserCutting #LEDs

And my favorite from Teardown needs video for the animation, by https://www.instagram.com/alicenlewis/ + https://www.instagram.com/cantfocus

#teardown2026 #laserCutting #LEDs

And my favorite from Teardown needs video for the animation, by https://www.instagram.com/alicenlewis/ + https://www.instagram.com/cantfocus

#teardown2026 #laserCutting #LEDs

And my favorite from Teardown needs video for the animation, by https://www.instagram.com/alicenlewis/ + https://www.instagram.com/cantfocus

#teardown2026 #laserCutting #LEDs

Self designed keychain to remember a great Surfcamp week. #surfboard #lasercutting #surfing #makerspace #fablab

Self designed keychain to remember a great Surfcamp week. #surfboard #lasercutting #surfing #makerspace #fablab

Self designed keychain to remember a great Surfcamp week. #surfboard #lasercutting #surfing #makerspace #fablab

Self designed keychain to remember a great Surfcamp week. #surfboard #lasercutting #surfing #makerspace #fablab

We're proud to showcase one of our premium custom metal partition designs. We precision-cut it using advanced fiber laser technology for a valued client. Captured during transportation to the installation site, the panel reflects the exceptional craftsmanship and attention to detail that define our work. From digital concept to flawless fabrication, every design is created to deliver elegance, durability, and a striking architectural statement in any space
#Designifier #lasercut #lasercutting

Guten Morgen ☕ nur kurz... vor zwei Jahren etwa habe ich mir ein Lasergehäuse mit Abluftpumpe und Schlauch selbst gebaut - weil diese Dinger so teuflisch teuer sind. Die meiste Zeit hatte ich den Deckel unten und irgend welchen Kram oben drauf auf den Klappen abgelagert...
Vorige Woche verstarb der Treiber für den y-Motor und ich musste feststellen, dass es die Platine nicht mehr als Ersatzteil gab. Ich fand nur noch Borken in Russland aber diese Teile sind unerreichbar. Glücklicherweise fand ich von einem ähnlichen Gerät über Kleinanzeigen eine Steuerplatine, die ich anpassen konnte... ein Versuch war es wert 😔

Jetzt kommt aber der Knaller, warum die Platine wahrscheinlich gestorben ist. Seht euch mal das zweite Bild an....
Das passiert, wenn so ein Laser zu lange in einem Gehäuse steckt und man den Deckel zulässt - ROST ! Dabei ist in meinem Cave 'furztrocken' 😳 #lasercutting

Guten Morgen ☕ nur kurz... vor zwei Jahren etwa habe ich mir ein Lasergehäuse mit Abluftpumpe und Schlauch selbst gebaut - weil diese Dinger so teuflisch teuer sind. Die meiste Zeit hatte ich den Deckel unten und irgend welchen Kram oben drauf auf den Klappen abgelagert...
Vorige Woche verstarb der Treiber für den y-Motor und ich musste feststellen, dass es die Platine nicht mehr als Ersatzteil gab. Ich fand nur noch Borken in Russland aber diese Teile sind unerreichbar. Glücklicherweise fand ich von einem ähnlichen Gerät über Kleinanzeigen eine Steuerplatine, die ich anpassen konnte... ein Versuch war es wert 😔

Jetzt kommt aber der Knaller, warum die Platine wahrscheinlich gestorben ist. Seht euch mal das zweite Bild an....
Das passiert, wenn so ein Laser zu lange in einem Gehäuse steckt und man den Deckel zulässt - ROST ! Dabei ist in meinem Cave 'furztrocken' 😳 #lasercutting

Guten Morgen ☕ nur kurz... vor zwei Jahren etwa habe ich mir ein Lasergehäuse mit Abluftpumpe und Schlauch selbst gebaut - weil diese Dinger so teuflisch teuer sind. Die meiste Zeit hatte ich den Deckel unten und irgend welchen Kram oben drauf auf den Klappen abgelagert...
Vorige Woche verstarb der Treiber für den y-Motor und ich musste feststellen, dass es die Platine nicht mehr als Ersatzteil gab. Ich fand nur noch Borken in Russland aber diese Teile sind unerreichbar. Glücklicherweise fand ich von einem ähnlichen Gerät über Kleinanzeigen eine Steuerplatine, die ich anpassen konnte... ein Versuch war es wert 😔

Jetzt kommt aber der Knaller, warum die Platine wahrscheinlich gestorben ist. Seht euch mal das zweite Bild an....
Das passiert, wenn so ein Laser zu lange in einem Gehäuse steckt und man den Deckel zulässt - ROST ! Dabei ist in meinem Cave 'furztrocken' 😳 #lasercutting

Guten Morgen ☕ nur kurz... vor zwei Jahren etwa habe ich mir ein Lasergehäuse mit Abluftpumpe und Schlauch selbst gebaut - weil diese Dinger so teuflisch teuer sind. Die meiste Zeit hatte ich den Deckel unten und irgend welchen Kram oben drauf auf den Klappen abgelagert...
Vorige Woche verstarb der Treiber für den y-Motor und ich musste feststellen, dass es die Platine nicht mehr als Ersatzteil gab. Ich fand nur noch Borken in Russland aber diese Teile sind unerreichbar. Glücklicherweise fand ich von einem ähnlichen Gerät über Kleinanzeigen eine Steuerplatine, die ich anpassen konnte... ein Versuch war es wert 😔

Jetzt kommt aber der Knaller, warum die Platine wahrscheinlich gestorben ist. Seht euch mal das zweite Bild an....
Das passiert, wenn so ein Laser zu lange in einem Gehäuse steckt und man den Deckel zulässt - ROST ! Dabei ist in meinem Cave 'furztrocken' 😳 #lasercutting

Guten Morgen ☕ nur kurz... vor zwei Jahren etwa habe ich mir ein Lasergehäuse mit Abluftpumpe und Schlauch selbst gebaut - weil diese Dinger so teuflisch teuer sind. Die meiste Zeit hatte ich den Deckel unten und irgend welchen Kram oben drauf auf den Klappen abgelagert...
Vorige Woche verstarb der Treiber für den y-Motor und ich musste feststellen, dass es die Platine nicht mehr als Ersatzteil gab. Ich fand nur noch Borken in Russland aber diese Teile sind unerreichbar. Glücklicherweise fand ich von einem ähnlichen Gerät über Kleinanzeigen eine Steuerplatine, die ich anpassen konnte... ein Versuch war es wert 😔

Jetzt kommt aber der Knaller, warum die Platine wahrscheinlich gestorben ist. Seht euch mal das zweite Bild an....
Das passiert, wenn so ein Laser zu lange in einem Gehäuse steckt und man den Deckel zulässt - ROST ! Dabei ist in meinem Cave 'furztrocken' 😳 #lasercutting

Laser cutting season is here! I’ve started my annual tradition of cutting the 2026 @DublinMaker badges at @tog. #DublinMaker #LaserCutting #Making

Laser cutting season is here! I’ve started my annual tradition of cutting the 2026 @DublinMaker badges at @tog. #DublinMaker #LaserCutting #Making

Laser cutting season is here! I’ve started my annual tradition of cutting the 2026 @DublinMaker badges at @tog. #DublinMaker #LaserCutting #Making

Laser cutting season is here! I’ve started my annual tradition of cutting the 2026 @DublinMaker badges at @tog. #DublinMaker #LaserCutting #Making

Laser cutting season is here! I’ve started my annual tradition of cutting the 2026 @DublinMaker badges at @tog. #DublinMaker #LaserCutting #Making

The #madenewmakerspace in #Omaha #nebraska is looking for instructors!

We've set a goal to get at least 10 classes set up by the end of the year and I'm looking for instructors who would to share their experience with #maker topics like:
#3dprinting #openCad #electronics #lasercutting #woodworking #photography #technology #crafts
#textiles #lifehacks

Classes could be free or may charge a nominal fee, which will split with the instructor. DM me here or contact [email protected]

The #madenewmakerspace in #Omaha #nebraska is looking for instructors!

We've set a goal to get at least 10 classes set up by the end of the year and I'm looking for instructors who would to share their experience with #maker topics like:
#3dprinting #openCad #electronics #lasercutting #woodworking #photography #technology #crafts
#textiles #lifehacks

Classes could be free or may charge a nominal fee, which will split with the instructor. DM me here or contact [email protected]

The #madenewmakerspace in #Omaha #nebraska is looking for instructors!

We've set a goal to get at least 10 classes set up by the end of the year and I'm looking for instructors who would to share their experience with #maker topics like:
#3dprinting #openCad #electronics #lasercutting #woodworking #photography #technology #crafts
#textiles #lifehacks

Classes could be free or may charge a nominal fee, which will split with the instructor. DM me here or contact [email protected]

The #madenewmakerspace in #Omaha #nebraska is looking for instructors!

We've set a goal to get at least 10 classes set up by the end of the year and I'm looking for instructors who would to share their experience with #maker topics like:
#3dprinting #openCad #electronics #lasercutting #woodworking #photography #technology #crafts
#textiles #lifehacks

Classes could be free or may charge a nominal fee, which will split with the instructor. DM me here or contact [email protected]

The #madenewmakerspace in #Omaha #nebraska is looking for instructors!

We've set a goal to get at least 10 classes set up by the end of the year and I'm looking for instructors who would to share their experience with #maker topics like:
#3dprinting #openCad #electronics #lasercutting #woodworking #photography #technology #crafts
#textiles #lifehacks

Classes could be free or may charge a nominal fee, which will split with the instructor. DM me here or contact [email protected]

#detox Digital Detox mit Orangensaft im Garten nach einer Stunde #lasercutting

#detox Digital Detox mit Orangensaft im Garten nach einer Stunde #lasercutting

Der Ikea Kochlöffel kann immer noch verschönert werden #lasercutting #laserengraving #lasercut

Der Ikea Kochlöffel kann immer noch verschönert werden #lasercutting #laserengraving #lasercut

I made some "experimental" rulers to give one of my favorite YouTubers, Dave Picciuto, when I see him next week. He is a woodworker/maker/artist and played a big part in helping me see myself as an artist.

My favorite quote of his is "Rule 4: Consider everything an experiment" (from Corita Kent's 10 Rules). So I made these 4-inch rulers from two materials Dave likes to use in his projects: orange acrylic and (fake) walnut.

#lasercutting #wood #acrylic

I made some "experimental" rulers to give one of my favorite YouTubers, Dave Picciuto, when I see him next week. He is a woodworker/maker/artist and played a big part in helping me see myself as an artist.

My favorite quote of his is "Rule 4: Consider everything an experiment" (from Corita Kent's 10 Rules). So I made these 4-inch rulers from two materials Dave likes to use in his projects: orange acrylic and (fake) walnut.

#lasercutting #wood #acrylic

I made some "experimental" rulers to give one of my favorite YouTubers, Dave Picciuto, when I see him next week. He is a woodworker/maker/artist and played a big part in helping me see myself as an artist.

My favorite quote of his is "Rule 4: Consider everything an experiment" (from Corita Kent's 10 Rules). So I made these 4-inch rulers from two materials Dave likes to use in his projects: orange acrylic and (fake) walnut.

#lasercutting #wood #acrylic

I made some "experimental" rulers to give one of my favorite YouTubers, Dave Picciuto, when I see him next week. He is a woodworker/maker/artist and played a big part in helping me see myself as an artist.

My favorite quote of his is "Rule 4: Consider everything an experiment" (from Corita Kent's 10 Rules). So I made these 4-inch rulers from two materials Dave likes to use in his projects: orange acrylic and (fake) walnut.

#lasercutting #wood #acrylic