#extruder — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #extruder, aggregated by home.social.
-
Thema #extruder #Kalibrierung
Habe einen #Tronxy #X5SA Pro neu in meinem Maschinenpark und hab aus. Versehen den getriebeuntersetzten Extruder geschrottet. Hab den jetzt gegen einen Vollaluminium-Extruder getauscht, muss jetzt aber in der Firmware (#marlin) noch die Umsetzung einstellen, weil der Extruder Motor mindestens doppelt so schnell läuft.
Über #Pronterface via USB wollte ich die Daten auslesen mit #M503 bekomme aber ausgerechnet an der Stelle keine Rückmeldung.
Ich brauche hier Hilfe
-
Überarbeiteter Klassiker setzt neue Maßstäbe im #3D-Druck
#Bambu_Lab hebt mit dem #P2S den 3D-Druck auf ein neues Niveau – mit neuem #Extruder, #KI- #Fehlererkennung und adaptiver Kühlung für präzise Ergebnisse.
-
Überarbeiteter Klassiker setzt neue Maßstäbe im #3D-Druck
#Bambu_Lab hebt mit dem #P2S den 3D-Druck auf ein neues Niveau – mit neuem #Extruder, #KI- #Fehlererkennung und adaptiver Kühlung für präzise Ergebnisse.
-
Überarbeiteter Klassiker setzt neue Maßstäbe im #3D-Druck
#Bambu_Lab hebt mit dem #P2S den 3D-Druck auf ein neues Niveau – mit neuem #Extruder, #KI- #Fehlererkennung und adaptiver Kühlung für präzise Ergebnisse.
-
Überarbeiteter Klassiker setzt neue Maßstäbe im #3D-Druck
#Bambu_Lab hebt mit dem #P2S den 3D-Druck auf ein neues Niveau – mit neuem #Extruder, #KI- #Fehlererkennung und adaptiver Kühlung für präzise Ergebnisse.
-
Überarbeiteter Klassiker setzt neue Maßstäbe im #3D-Druck
#Bambu_Lab hebt mit dem #P2S den 3D-Druck auf ein neues Niveau – mit neuem #Extruder, #KI- #Fehlererkennung und adaptiver Kühlung für präzise Ergebnisse.
-
I've got A LOT of failed prints with my #creality #ender5 #3Dprinter. It #clogs very easily. I tought the #filament was wet, but a couple of hours ago it #clogged very badly and I had to completely #disassemble the #extruder, #hotend and even cut a little piece of #bowdentube... before doing all this work I looked at a video explaining how to do it and...
...I SAW it. The #fan. The f...ing extruder fan in the video was running from the moment the #printer was switched on. I have never seen mine running, I always tought it was temperature controlled or something... It was just #jammed 🤦♂️ Unfortunately the plastic was very tired by the heat, so a blade broke instantly while cleaning it.
It seems I have to wait for a #replacement part, but at least I found the problem. That's why the printer was SO #temperamental! -
I've got A LOT of failed prints with my #creality #ender5 #3Dprinter. It #clogs very easily. I tought the #filament was wet, but a couple of hours ago it #clogged very badly and I had to completely #disassemble the #extruder, #hotend and even cut a little piece of #bowdentube... before doing all this work I looked at a video explaining how to do it and...
...I SAW it. The #fan. The f...ing extruder fan in the video was running from the moment the #printer was switched on. I have never seen mine running, I always tought it was temperature controlled or something... It was just #jammed 🤦♂️ Unfortunately the plastic was very tired by the heat, so a blade broke instantly while cleaning it.
It seems I have to wait for a #replacement part, but at least I found the problem. That's why the printer was SO #temperamental! -
I've got A LOT of failed prints with my #creality #ender5 #3Dprinter. It #clogs very easily. I tought the #filament was wet, but a couple of hours ago it #clogged very badly and I had to completely #disassemble the #extruder, #hotend and even cut a little piece of #bowdentube... before doing all this work I looked at a video explaining how to do it and...
...I SAW it. The #fan. The f...ing extruder fan in the video was running from the moment the #printer was switched on. I have never seen mine running, I always tought it was temperature controlled or something... It was just #jammed 🤦♂️ Unfortunately the plastic was very tired by the heat, so a blade broke instantly while cleaning it.
It seems I have to wait for a #replacement part, but at least I found the problem. That's why the printer was SO #temperamental! -
I've got A LOT of failed prints with my #creality #ender5 #3Dprinter. It #clogs very easily. I tought the #filament was wet, but a couple of hours ago it #clogged very badly and I had to completely #disassemble the #extruder, #hotend and even cut a little piece of #bowdentube... before doing all this work I looked at a video explaining how to do it and...
...I SAW it. The #fan. The f...ing extruder fan in the video was running from the moment the #printer was switched on. I have never seen mine running, I always tought it was temperature controlled or something... It was just #jammed 🤦♂️ Unfortunately the plastic was very tired by the heat, so a blade broke instantly while cleaning it.
It seems I have to wait for a #replacement part, but at least I found the problem. That's why the printer was SO #temperamental! -
I've got A LOT of failed prints with my #creality #ender5 #3Dprinter. It #clogs very easily. I tought the #filament was wet, but a couple of hours ago it #clogged very badly and I had to completely #disassemble the #extruder, #hotend and even cut a little piece of #bowdentube... before doing all this work I looked at a video explaining how to do it and...
...I SAW it. The #fan. The f...ing extruder fan in the video was running from the moment the #printer was switched on. I have never seen mine running, I always tought it was temperature controlled or something... It was just #jammed 🤦♂️ Unfortunately the plastic was very tired by the heat, so a blade broke instantly while cleaning it.
It seems I have to wait for a #replacement part, but at least I found the problem. That's why the printer was SO #temperamental! -
Diese Woche hat mich mein#bambulab #P1S mal so richtig geärgert.
Ständig zerfledderte der Druck und aus dem #extruder kamen klackende Geräusche.
Nachdem ich eine Vollkalibrierung durchgeführt, den Vorschub ausgebaut und überprüft, die PTFE Schläuche zum AMS kontrolliert und von der neusten Firmware zurück auf die 1.07.00.00 gegangen bin, blieb nur noch eins: #cloggedNozzle = Düse verstopft.
Mach nur 15 Minuten funktionierte alles wieder wie gewohnt.
Jetzt hängt der 2. #proxmox auch am Brett.
-
Diese Woche hat mich mein#bambulab #P1S mal so richtig geärgert.
Ständig zerfledderte der Druck und auf dem #extruder kamen klackende Geräusche.
Nachdem ich eine Vollkalibrierung durchgeführt, den Vorschub ausgebaut und überprüft, die PTFE Schläuche zum AMS kontrolliert und von der neusten Firmware zurück auf die 1.07.00.00 gegangen bin, blieb nur noch eins: #cloggedNozzle = Düse verstopft.
Mach nur 15 Minuten funktionierte alles wieder wie gewohnt.
Jetzt hängt der 2. #proxmox auch am Brett.
-
Diese Woche hat mich mein#bambulab #P1S mal so richtig geärgert.
Ständig zerfledderte der Druck und aus dem #extruder kamen klackende Geräusche.
Nachdem ich eine Vollkalibrierung durchgeführt, den Vorschub ausgebaut und überprüft, die PTFE Schläuche zum AMS kontrolliert und von der neusten Firmware zurück auf die 1.07.00.00 gegangen bin, blieb nur noch eins: #cloggedNozzle = Düse verstopft.
Mach nur 15 Minuten funktionierte alles wieder wie gewohnt.
Jetzt hängt der 2. #proxmox auch am Brett.
-
Diese Woche hat mich mein#bambulab #P1S mal so richtig geärgert.
Ständig zerfledderte der Druck und auf dem #extruder kamen klackende Geräusche.
Nachdem ich eine Vollkalibrierung durchgeführt, den Vorschub ausgebaut und überprüft, die PTFE Schläuche zum AMS kontrolliert und von der neusten Firmware zurück auf die 1.07.00.00 gegangen bin, blieb nur noch eins: #cloggedNozzle = Düse verstopft.
Mach nur 15 Minuten funktionierte alles wieder wie gewohnt.
Jetzt hängt der 2. #proxmox auch am Brett.
-
One nozzle replacement and cooling assembly upgrade later, and my 4y old Prusa Mk3S+ is back to printing at excellent quality.
The new cooling assembly provides a higher flow rate while focusing the air onto the extruded filament a lot better than the old one. And I replaced the worn 2yo .4mm nozzle with a new .6mm one. 10/10 worth it.#3dprinting #3d #printer #printers #filament #extruder #prusa #prusa3d #i3mk3s #mk3s
-
One nozzle replacement and cooling assembly upgrade later, and my 4y old Prusa Mk3S+ is back to printing at excellent quality.
The new cooling assembly provides a higher flow rate while focusing the air onto the extruded filament a lot better than the old one. And I replaced the worn 2yo .4mm nozzle with a new .6mm one. 10/10 worth it.#3dprinting #3d #printer #printers #filament #extruder #prusa #prusa3d #i3mk3s #mk3s
-
One nozzle replacement and cooling assembly upgrade later, and my 4y old Prusa Mk3S+ is back to printing at excellent quality.
The new cooling assembly provides a higher flow rate while focusing the air onto the extruded filament a lot better than the old one. And I replaced the worn 2yo .4mm nozzle with a new .6mm one. 10/10 worth it.#3dprinting #3d #printer #printers #filament #extruder #prusa #prusa3d #i3mk3s #mk3s
-
One nozzle replacement and cooling assembly upgrade later, and my 4y old Prusa Mk3S+ is back to printing at excellent quality.
The new cooling assembly provides a higher flow rate while focusing the air onto the extruded filament a lot better than the old one. And I replaced the worn 2yo .4mm nozzle with a new .6mm one. 10/10 worth it.#3dprinting #3d #printer #printers #filament #extruder #prusa #prusa3d #i3mk3s #mk3s
-
M E R R Y 🎅 🎄
C H R I S T M A SA little present for you:
https://github.com/gregsaun/BearExxa-V2/releases/tag/2.0.0-beta.6 -
M E R R Y 🎅 🎄
C H R I S T M A SA little present for you:
https://github.com/gregsaun/BearExxa-V2/releases/tag/2.0.0-beta.6 -
M E R R Y 🎅 🎄
C H R I S T M A SA little present for you:
https://github.com/gregsaun/BearExxa-V2/releases/tag/2.0.0-beta.6 -
M E R R Y 🎅 🎄
C H R I S T M A SA little present for you:
https://github.com/gregsaun/BearExxa-V2/releases/tag/2.0.0-beta.6 -
M E R R Y 🎅 🎄
C H R I S T M A SA little present for you:
https://github.com/gregsaun/BearExxa-V2/releases/tag/2.0.0-beta.6 -
3D Printing With a Hot Glue Gun https://hackaday.com/2024/10/31/3d-printing-with-a-hot-glue-gun/ #3dPrinterhacks #extruder #hotglue #hotend
-
3D Printing With a Hot Glue Gun https://hackaday.com/2024/10/31/3d-printing-with-a-hot-glue-gun/ #3dPrinterhacks #extruder #hotglue #hotend
-
3D Printing With a Hot Glue Gun https://hackaday.com/2024/10/31/3d-printing-with-a-hot-glue-gun/ #3dPrinterhacks #extruder #hotglue #hotend
-
3D Printing With a Hot Glue Gun - Face it, we’ve all at some time or other looked at our hot glue guns, and thought ... - https://hackaday.com/2024/10/31/3d-printing-with-a-hot-glue-gun/ #3dprinterhacks #extruder #hotglue #hotend
-
3D Printing With a Hot Glue Gun - Face it, we’ve all at some time or other looked at our hot glue guns, and thought ... - https://hackaday.com/2024/10/31/3d-printing-with-a-hot-glue-gun/ #3dprinterhacks #extruder #hotglue #hotend
-
3D Printing With a Hot Glue Gun - Face it, we’ve all at some time or other looked at our hot glue guns, and thought ... - https://hackaday.com/2024/10/31/3d-printing-with-a-hot-glue-gun/ #3dprinterhacks #extruder #hotglue #hotend
-
3D Printing With a Hot Glue Gun - Face it, we’ve all at some time or other looked at our hot glue guns, and thought ... - https://hackaday.com/2024/10/31/3d-printing-with-a-hot-glue-gun/ #3dprinterhacks #extruder #hotglue #hotend
-
3D Printing With a Hot Glue Gun - Face it, we’ve all at some time or other looked at our hot glue guns, and thought ... - https://hackaday.com/2024/10/31/3d-printing-with-a-hot-glue-gun/ #3dprinterhacks #extruder #hotglue #hotend
-
This is how serviceable the BearExxa V2 is. 4 screws + unplug the motor and you have access to gearing, hobb gears, idler door, filament sensor and top of PTFE. Cleaning is a breeze!
For the reassembly: no gears to adjust, nothing to align or center, no extra tool, no warranty void!
On the back you can access all the wiring and belt path with just a few screws and without having to unplug anything. 2 more screws and you can remove the extruder.
⤵️
-
This is how serviceable the BearExxa V2 is. 4 screws + unplug the motor and you have access to gearing, hobb gears, idler door, filament sensor and top of PTFE. Cleaning is a breeze!
For the reassembly: no gears to adjust, nothing to align or center, no extra tool, no warranty void!
On the back you can access all the wiring and belt path with just a few screws and without having to unplug anything. 2 more screws and you can remove the extruder.
⤵️
-
This is how serviceable the BearExxa V2 is. 4 screws + unplug the motor and you have access to gearing, hobb gears, idler door, filament sensor and top of PTFE. Cleaning is a breeze!
For the reassembly: no gears to adjust, nothing to align or center, no extra tool, no warranty void!
On the back you can access all the wiring and belt path with just a few screws and without having to unplug anything. 2 more screws and you can remove the extruder.
⤵️
-
This is how serviceable the BearExxa V2 is. 4 screws + unplug the motor and you have access to gearing, hobb gears, idler door, filament sensor and top of PTFE. Cleaning is a breeze!
For the reassembly: no gears to adjust, nothing to align or center, no extra tool, no warranty void!
On the back you can access all the wiring and belt path with just a few screws and without having to unplug anything. 2 more screws and you can remove the extruder.
⤵️
-
This is how serviceable the BearExxa V2 is. 4 screws + unplug the motor and you have access to gearing, hobb gears, idler door, filament sensor and top of PTFE. Cleaning is a breeze!
For the reassembly: no gears to adjust, nothing to align or center, no extra tool, no warranty void!
On the back you can access all the wiring and belt path with just a few screws and without having to unplug anything. 2 more screws and you can remove the extruder.
⤵️
-
DIY Spacer Increases FDM Flow Rate for Faster, Better Printing - The host of problems to deal with when you’re feeling the need for FDM speed are m... - https://hackaday.com/2024/07/12/diy-spacer-increases-fdm-flow-rate-for-faster-better-printing/ #3dprinterhacks #bondtech #extruder #volcano #copper #hotend #nozzle #spacer #cht #fdm
-
DIY Spacer Increases FDM Flow Rate for Faster, Better Printing - The host of problems to deal with when you’re feeling the need for FDM speed are m... - https://hackaday.com/2024/07/12/diy-spacer-increases-fdm-flow-rate-for-faster-better-printing/ #3dprinterhacks #bondtech #extruder #volcano #copper #hotend #nozzle #spacer #cht #fdm
-
DIY Spacer Increases FDM Flow Rate for Faster, Better Printing - The host of problems to deal with when you’re feeling the need for FDM speed are m... - https://hackaday.com/2024/07/12/diy-spacer-increases-fdm-flow-rate-for-faster-better-printing/ #3dprinterhacks #bondtech #extruder #volcano #copper #hotend #nozzle #spacer #cht #fdm
