#epoxy — Public Fediverse posts

Automatic Aquarium Gravel Market in Italy | Report – IndexBox

Italy Automatic Aquarium Gravel Market 2026 Analysis and Forec…
#Italy #Europe #Europa #EU #aesthetictankbottomcovering #anti-dusttreatments #automaticaquariumgravel #biologicalmediasurfacearea #consumergoodsmarketreport #epoxy/polymercolorcoating #forecast #marketanalysis #mechanicalpre-filterforcanisterfilters #sizescreening/calibration #tumble-washing/polishing #under-gravelfiltrationsystems
https://www.europesays.com/italy/15457/

Playing with #craft #epoxy #resin . Hubs made this from the box of the #lego set our daughter bought and assembled for herself. Coming soon: some #mtg #magicthegathering #tmnt #ub #universesbeyond pieces! I need daylight to #phtotograph them.

Playing with #craft #epoxy #resin . Hubs made this from the box of the #lego set our daughter bought and assembled for herself. Coming soon: some #mtg #magicthegathering #tmnt #ub #universesbeyond pieces! I need daylight to #phtotograph them.

Playing with #craft #epoxy #resin . Hubs made this from the box of the #lego set our daughter bought and assembled for herself. Coming soon: some #mtg #magicthegathering #tmnt #ub #universesbeyond pieces! I need daylight to #phtotograph them.

https://www.europesays.com/uk/908520/ United States Epoxy Resin Market Set to Reach US$ 6.15 Billion by 2034 as Demand Surges Across Construction, Aerospace, and Electronics #2034 #615 #across #Aerospace #and #as #billion #by #construction #Demand #electronics #epoxy #market #reach #resin #set #States #surges #to #United #UnitedStates #us #USA

Epoxy Structural Adhesives Market in Italy | Report – IndexBox https://www.byteseu.com/1790507/ #3907 #3910 #adhesives #epoxy #forecast #HS3506 #Italy #MarketAnalysis #structural

Our cheap #pressurewasher started leaking from the handle, while I was using it to clean a lawnmower.

Took the screws out of the handle cover, inspected, didn't see anything, reassembled. Leaks.

Got box of assorted O-rings, replaced one at wand supply connector. Leaks.

Took cover off, hooked wand up, ran motor, saw thin fan of water shoot out of hairline crack in plastic tube. Oh!

Dried it out.

Slopped mixed epoxy onto tube, then wound nylon string tight around, then more #epoxy .

#repair

Freezer draw update.

2 part Apoxie has been applied - detailed investigation of cracks showed that liquid Expoy wasn't gonna cut it and would be a major PITA to apply.

Now just gotta leave it alone for 3 days to fully cure and see how it does.

If it doesn't cure and hold fast, or does cure but then doesn't fare well under freezer temps, I'll have to just go buy the expensive replacement part.

Fingers crossed ! 🤞🏾😒

Thanks for your help everyone.

#Apoxy #Epoxy #Bodge #Repairs

Freezer draw update.

2 part Apoxie has been applied - detailed investigation of cracks showed that liquid Expoy wasn't gonna cut it and would be a major PITA to apply.

Now just gotta leave it alone for 3 days to fully cure and see how it does.

If it doesn't cure and hold fast, or does cure but then doesn't fare well under freezer temps, I'll have to just go buy the expensive replacement part.

Fingers crossed ! 🤞🏾😒

Thanks for your help everyone.

#Apoxy #Epoxy #Bodge #Repairs

Freezer draw update.

2 part Apoxie has been applied - detailed investigation of cracks showed that liquid Expoy wasn't gonna cut it and would be a major PITA to apply.

Now just gotta leave it alone for 3 days to fully cure and see how it does.

If it doesn't cure and hold fast, or does cure but then doesn't fare well under freezer temps, I'll have to just go buy the expensive replacement part.

Fingers crossed ! 🤞🏾😒

Thanks for your help everyone.

#Apoxy #Epoxy #Bodge #Repairs

Freezer draw update.

2 part Apoxie has been applied - detailed investigation of cracks showed that liquid Expoy wasn't gonna cut it and would be a major PITA to apply.

Now just gotta leave it alone for 3 days to fully cure and see how it does.

If it doesn't cure and hold fast, or does cure but then doesn't fare well under freezer temps, I'll have to just go buy the expensive replacement part.

Fingers crossed ! 🤞🏾😒

Thanks for your help everyone.

#Apoxy #Epoxy #Bodge #Repairs

Dons Leia hooded dress "Help me Mastodon you're my only hope"

Freezer draw was dropped so now has massive crack down front & half way through the bottom

Finding a spare to buy is proving.. challenging

I have 2 part #Apoxie, can I use it to repair crack or is having cured apoxie in the freezer full time a bad idea?

(Please don't make me regret asking y'all for help)

I also have some liquid 2 part #Epoxy compound but don't think that will be strong enough for the bottom of the draw?

:sigh:

Dons Leia hooded dress "Help me Mastodon you're my only hope"

Freezer draw was dropped so now has massive crack down front & half way through the bottom

Finding a spare to buy is proving.. challenging

I have 2 part #Apoxie, can I use it to repair crack or is having cured apoxie in the freezer full time a bad idea?

(Please don't make me regret asking y'all for help)

I also have some liquid 2 part #Epoxy compound but don't think that will be strong enough for the bottom of the draw?

:sigh:

Dons Leia hooded dress "Help me Mastodon you're my only hope"

Freezer draw was dropped so now has massive crack down front & half way through the bottom

Finding a spare to buy is proving.. challenging

I have 2 part #Apoxie, can I use it to repair crack or is having cured apoxie in the freezer full time a bad idea?

(Please don't make me regret asking y'all for help)

I also have some liquid 2 part #Epoxy compound but don't think that will be strong enough for the bottom of the draw?

:sigh:

Dons Leia hooded dress "Help me Mastodon you're my only hope"

Freezer draw was dropped so now has massive crack down front & half way through the bottom

Finding a spare to buy is proving.. challenging

I have 2 part #Apoxie, can I use it to repair crack or is having cured apoxie in the freezer full time a bad idea?

(Please don't make me regret asking y'all for help)

I also have some liquid 2 part #Epoxy compound but don't think that will be strong enough for the bottom of the draw?

:sigh:

Dons Leia hooded dress "Help me Mastodon you're my only hope"

Freezer draw was dropped so now has massive crack down front & half way through the bottom

Finding a spare to buy is proving.. challenging

I have 2 part #Apoxie, can I use it to repair crack or is having cured apoxie in the freezer full time a bad idea?

(Please don't make me regret asking y'all for help)

I also have some liquid 2 part #Epoxy compound but don't think that will be strong enough for the bottom of the draw?

:sigh:

More sustainable epoxy thanks to phosphorus

https://www.empa.ch/web/s604/flamm-hemmendes-epoxidharz-nachhaltiger-machen

#HackerNews #sustainable #epoxy #phosphorus #ecofriendly #innovation #materials

#Epoxy resin is a clear, robust #polymer that is widely used – especially as part of fiber-reinforced materials in aviation, the automotive industry, and more. Until now, however, it has not been possible to recycle it
#MolecularScience #Chemistry #sflorg
https://www.sflorg.com/2026/01/mols01132601.html

#Epoxy resin is a clear, robust #polymer that is widely used – especially as part of fiber-reinforced materials in aviation, the automotive industry, and more. Until now, however, it has not been possible to recycle it
#MolecularScience #Chemistry #sflorg
https://www.sflorg.com/2026/01/mols01132601.html

#Epoxy resin is a clear, robust #polymer that is widely used – especially as part of fiber-reinforced materials in aviation, the automotive industry, and more. Until now, however, it has not been possible to recycle it
#MolecularScience #Chemistry #sflorg
https://www.sflorg.com/2026/01/mols01132601.html

#Epoxy resin is a clear, robust #polymer that is widely used – especially as part of fiber-reinforced materials in aviation, the automotive industry, and more. Until now, however, it has not been possible to recycle it
#MolecularScience #Chemistry #sflorg
https://www.sflorg.com/2026/01/mols01132601.html

#Epoxy resin is a clear, robust #polymer that is widely used – especially as part of fiber-reinforced materials in aviation, the automotive industry, and more. Until now, however, it has not been possible to recycle it
#MolecularScience #Chemistry #sflorg
https://www.sflorg.com/2026/01/mols01132601.html

The glider now has 12 pounds of lead shot and epoxy added to dead space in the very end of the tail boom.

My initial estimate of volume indicated that I could add 8 - 10 pounds this way. I'm pleasantly surprised, and I didn't make a chocolate covered mess of things as I was pouring this goop into the tail.

I need to add a few more pounds to the tail. Phase two of this project will use lead plate, bolted to the vertical fin spar. (I need to unroll the 1/4-inch plate first, then develop a template to cut the lead.)

I could not add the epoxy/lead shot mix all at once because of the exothermic reaction of epoxy. When mixed epoxy is in a thick blob (instead of a thin layer), it generates enough heat to warm itself...which accelerates the chemical reaction...releasing more heat...further accelerating the reaction.... I have seen epoxy smoking hot because of this, so I added a bit, waited a half hour, checked temperature with an IR non-contact thermometer, added a bit more when it was clear that the exotherm was only very mild, etc. That took a while, but turned out well.

I note that Roto Metals has a discount on some 1-inch lead plate. Get your fork lift ready. No free shipping!

https://www.rotometals.com/lead-sheet-plates/sheet-lead-1-64-lbs-sq-ft/

#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Ballast #Math #Density #Exothermic #Chemistry #Thermodynamics #Lead #Epoxy

Puis, j'ai poncé à la main au grain 500 (j'ai pas plus haut), et c'est pas super transparent, mais c'est pas mal.

J'ai fini par faire des petits trous (sachant que j'avais fait des rigoles sur le fond pour que ça s'écoule).

Et voilà !!!

Petit doute concernant l'écoulement de l'eau. Avec la tension superficielle de l'eau, pas sûr que ça s'égoutte bien. On verra en pratique.

#résine #epoxy #RésineEpoxy

Starry Night

These have one of my favourite glitter I've found so far! It has such a wonderful sparkle but unfortunately it's near impossible to show on photos 😅 (it's the little silvery dots)

#dice #dicemaking #ttrpg #dnd #daggerheart #handmade #epoxy

My glider needs the center of gravity shifted aft, so I need to add weight in the tail.

The first photo is looking into the rudder cove (rudder removed). I can bolt some lead plates to the flat face of the vertical fin spar, but I will need even more weight added back here.

Note that the rudder hinge support is glowing green...a flashlight on the other side is illuminating it.

That part is hollow and it's nothing but dead space. I can add lead shot and epoxy in there.

The second photo shows the view of this pale green fiberglass part from the other side. Before I can add lead shot in there, I need to add a dam to retain it while the epoxy cures.

Third photo shows a piece of scrap Plexiglas that fits up against the end of the rudder hinge support.

Final photo shows the Plexiglas dam glued into place with RTV silicone caulk. It has a semicircular cutout that allows a larger diameter piece of tubing to be placed there while I pour lead shot and epoxy into a funnel and fill that empty space.

Half of the caulking work was done blind and by feel. I am accessing this tight space from the inspection port in the side of the vertical fin. There is just enough room for one hand and this part to pass through the port and then get positioned. I practiced before applying the caulk so I knew exactly how to position and twist the part so that I didn't make a mess and most of the caulk ended up in the desired location.

#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Epoxy #Ballast #Lead #Plexiglas

The electric glider's two main batteries each weigh about 16 Kg (36 lbs). I need a positive restraint system that can handle vibration and especially negative G.

Yesterday evening I epoxied in place some retaining blocks for the two battery clamping bars, but the garage gets cold overnight. I placed an incandescent lamp over the top of the battery box and wrapped some towels as a 'tent' to keep the warm air from easily escaping. This allowed the battery box to stay slightly warmer and accelerate the curing of the epoxy.

The second photo shows one end of a battery clamping bar (yellow) that fits under a carbon fiber inverted shelf (black). On each side of the clamping bar there are now two blocks of garolite (pale green) that prevent the battery block from sliding off to the side.

Garolite (G-10) is commonly used as the substrate for printed circuit boards, and you can get it in significant thickness, which is what I need.

https://en.wikipedia.org/wiki/G-10_(material)

#AvGeek #Aviation #ElectricAircraft #Homebuilt #Glider #DIY #EAA #Epoxy #Chemistry #Temperature #Garolite

Mais pourquoi faire ?!!

Et pour y couler de la résine transparente ! C'est la 1ere fois que j'utilisais de la résine, j'appréhendais un peu parce que j'avais pas trop trop le droit à l'erreur pour cette 1ere fois...

Donc j'ai commencé par badigeonner de résine le trou et les poissons, puis j'ai rempli le fond en y plaçant les poissons.

Le gros poisson tenait tout seul, mais j'ai dû usé d'une ruse pour placer le petit poisson à base de carton et d'une aiguille.
Il faisait froid chez moi, donc ça a mis du temps pour se solidifier un peu.

Ce matin, je me suis réveillée et j'étais ravie ! C'était tout beau et ça tenait bien en place, yeah ! C'est parti pour la couche finale !

Je fais mes préparatifs, je verse dans le trou, il y a quelques bulles, mais j'arrive à les enlever.
Je couvre pour protéger, et j'ai envie de regarder à quoi ça ressemble 15min après. J'ai bien fait parce qu'il y a eu plein de petites bulles qui se sont formées !

Pas de panique, j'utilise le décapeur thermique en restant à distance pour les faire éclater. Mais ça marchait pas et il y avait encore plus de bulles 😭
C'était un peu la panique ! Je prends une petite aiguille à coudre pour les percer et les évacuer. Et là je me rends compte que la surface a commencé à se solidifier avec les bulles 😬
Alors j'ai commencé à enlever des morceaux de résine toute molle, c'était la catastrophe, ça ne faisait qu'empirer 😱

Bon, j'ai arrêté le désastre, j'ai accepté qu'il y ait des bulles, et puis finalement ça rend ok. La surface n'est pas aussi lisse que ce que j'imaginais, il y a quelques bulles si on regarde bien, mais c'est quand même réussi.

Et voilà ! J'ai un petit aquarium terrestre maintenant !!!!

#bricolage #resine #epoxy #EpoxyResin #poisson #fish #aquarium

Mais pourquoi faire ?!!

Et pour y couler de la résine transparente ! C'est la 1ere fois que j'utilisais de la résine, j'appréhendais un peu parce que j'avais pas trop trop le droit à l'erreur pour cette 1ere fois...

Donc j'ai commencé par badigeonner de résine le trou et les poissons, puis j'ai rempli le fond en y plaçant les poissons.

Le gros poisson tenait tout seul, mais j'ai dû usé d'une ruse pour placer le petit poisson à base de carton et d'une aiguille.
Il faisait froid chez moi, donc ça a mis du temps pour se solidifier un peu.

Ce matin, je me suis réveillée et j'étais ravie ! C'était tout beau et ça tenait bien en place, yeah ! C'est parti pour la couche finale !

Je fais mes préparatifs, je verse dans le trou, il y a quelques bulles, mais j'arrive à les enlever.
Je couvre pour protéger, et j'ai envie de regarder à quoi ça ressemble 15min après. J'ai bien fait parce qu'il y a eu plein de petites bulles qui se sont formées !

Pas de panique, j'utilise le décapeur thermique en restant à distance pour les faire éclater. Mais ça marchait pas et il y avait encore plus de bulles 😭
C'était un peu la panique ! Je prends une petite aiguille à coudre pour les percer et les évacuer. Et là je me rends compte que la surface a commencé à se solidifier avec les bulles 😬
Alors j'ai commencé à enlever des morceaux de résine toute molle, c'était la catastrophe, ça ne faisait qu'empirer 😱

Bon, j'ai arrêté le désastre, j'ai accepté qu'il y ait des bulles, et puis finalement ça rend ok. La surface n'est pas aussi lisse que ce que j'imaginais, il y a quelques bulles si on regarde bien, mais c'est quand même réussi.

Et voilà ! J'ai un petit aquarium terrestre maintenant !!!!

#bricolage #resine #epoxy #EpoxyResin #poisson #fish #aquarium

Mais pourquoi faire ?!!

Et pour y couler de la résine transparente ! C'est la 1ere fois que j'utilisais de la résine, j'appréhendais un peu parce que j'avais pas trop trop le droit à l'erreur pour cette 1ere fois...

Donc j'ai commencé par badigeonner de résine le trou et les poissons, puis j'ai rempli le fond en y plaçant les poissons.

Le gros poisson tenait tout seul, mais j'ai dû usé d'une ruse pour placer le petit poisson à base de carton et d'une aiguille.
Il faisait froid chez moi, donc ça a mis du temps pour se solidifier un peu.

Ce matin, je me suis réveillée et j'étais ravie ! C'était tout beau et ça tenait bien en place, yeah ! C'est parti pour la couche finale !

Je fais mes préparatifs, je verse dans le trou, il y a quelques bulles, mais j'arrive à les enlever.
Je couvre pour protéger, et j'ai envie de regarder à quoi ça ressemble 15min après. J'ai bien fait parce qu'il y a eu plein de petites bulles qui se sont formées !

Pas de panique, j'utilise le décapeur thermique en restant à distance pour les faire éclater. Mais ça marchait pas et il y avait encore plus de bulles 😭
C'était un peu la panique ! Je prends une petite aiguille à coudre pour les percer et les évacuer. Et là je me rends compte que la surface a commencé à se solidifier avec les bulles 😬
Alors j'ai commencé à enlever des morceaux de résine toute molle, c'était la catastrophe, ça ne faisait qu'empirer 😱

Bon, j'ai arrêté le désastre, j'ai accepté qu'il y ait des bulles, et puis finalement ça rend ok. La surface n'est pas aussi lisse que ce que j'imaginais, il y a quelques bulles si on regarde bien, mais c'est quand même réussi.

Et voilà ! J'ai un petit aquarium terrestre maintenant !!!!

#bricolage #resine #epoxy #EpoxyResin #poisson #fish #aquarium

Mais pourquoi faire ?!!

Et pour y couler de la résine transparente ! C'est la 1ere fois que j'utilisais de la résine, j'appréhendais un peu parce que j'avais pas trop trop le droit à l'erreur pour cette 1ere fois...

Donc j'ai commencé par badigeonner de résine le trou et les poissons, puis j'ai rempli le fond en y plaçant les poissons.

Le gros poisson tenait tout seul, mais j'ai dû usé d'une ruse pour placer le petit poisson à base de carton et d'une aiguille.
Il faisait froid chez moi, donc ça a mis du temps pour se solidifier un peu.

Ce matin, je me suis réveillée et j'étais ravie ! C'était tout beau et ça tenait bien en place, yeah ! C'est parti pour la couche finale !

Je fais mes préparatifs, je verse dans le trou, il y a quelques bulles, mais j'arrive à les enlever.
Je couvre pour protéger, et j'ai envie de regarder à quoi ça ressemble 15min après. J'ai bien fait parce qu'il y a eu plein de petites bulles qui se sont formées !

Pas de panique, j'utilise le décapeur thermique en restant à distance pour les faire éclater. Mais ça marchait pas et il y avait encore plus de bulles 😭
C'était un peu la panique ! Je prends une petite aiguille à coudre pour les percer et les évacuer. Et là je me rends compte que la surface a commencé à se solidifier avec les bulles 😬
Alors j'ai commencé à enlever des morceaux de résine toute molle, c'était la catastrophe, ça ne faisait qu'empirer 😱

Bon, j'ai arrêté le désastre, j'ai accepté qu'il y ait des bulles, et puis finalement ça rend ok. La surface n'est pas aussi lisse que ce que j'imaginais, il y a quelques bulles si on regarde bien, mais c'est quand même réussi.

Et voilà ! J'ai un petit aquarium terrestre maintenant !!!!

#bricolage #resine #epoxy #EpoxyResin #poisson #fish #aquarium

Mais pourquoi faire ?!!

Et pour y couler de la résine transparente ! C'est la 1ere fois que j'utilisais de la résine, j'appréhendais un peu parce que j'avais pas trop trop le droit à l'erreur pour cette 1ere fois...

Donc j'ai commencé par badigeonner de résine le trou et les poissons, puis j'ai rempli le fond en y plaçant les poissons.

Le gros poisson tenait tout seul, mais j'ai dû usé d'une ruse pour placer le petit poisson à base de carton et d'une aiguille.
Il faisait froid chez moi, donc ça a mis du temps pour se solidifier un peu.

Ce matin, je me suis réveillée et j'étais ravie ! C'était tout beau et ça tenait bien en place, yeah ! C'est parti pour la couche finale !

Je fais mes préparatifs, je verse dans le trou, il y a quelques bulles, mais j'arrive à les enlever.
Je couvre pour protéger, et j'ai envie de regarder à quoi ça ressemble 15min après. J'ai bien fait parce qu'il y a eu plein de petites bulles qui se sont formées !

Pas de panique, j'utilise le décapeur thermique en restant à distance pour les faire éclater. Mais ça marchait pas et il y avait encore plus de bulles 😭
C'était un peu la panique ! Je prends une petite aiguille à coudre pour les percer et les évacuer. Et là je me rends compte que la surface a commencé à se solidifier avec les bulles 😬
Alors j'ai commencé à enlever des morceaux de résine toute molle, c'était la catastrophe, ça ne faisait qu'empirer 😱

Bon, j'ai arrêté le désastre, j'ai accepté qu'il y ait des bulles, et puis finalement ça rend ok. La surface n'est pas aussi lisse que ce que j'imaginais, il y a quelques bulles si on regarde bien, mais c'est quand même réussi.

Et voilà ! J'ai un petit aquarium terrestre maintenant !!!!

#bricolage #resine #epoxy #EpoxyResin #poisson #fish #aquarium

To anyone who wants to bring their why2025 badge to 39c3, don't forget to bring your antenna. If you don't have yours anymore, I am bringing a few kits with an antenna and connector (thanks to @a51c ).

I have 7 of them with a half-decent antenna for €6, and 2 of them with a the original badge antenna for €3.

The LoRa module on the badge also requires two bodge wires to be soldered. Two pieces of wire and instructions are included in the kits.

On some badges it may be required to remove some epoxy around one of the battery holders, and even if it isn't, it may make soldering the bodge wires easier. You may also want to make your badge safer and more compact by removing the battery holders entirely.

I am also bringing some epoxy removal kits for free (they're just alcohol wipes and disposable vinyl gloves).

#why2025 #39c3 #meshcore #badge #bodge #soldering #epoxy #safety #congress #hashtagspam

To anyone who wants to bring their why2025 badge to 39c3, don't forget to bring your antenna. If you don't have yours anymore, I am bringing a few kits with an antenna and connector (thanks to @a51c ).

I have 7 of them with a half-decent antenna for €6, and 2 of them with a the original badge antenna for €3.

The LoRa module on the badge also requires two bodge wires to be soldered. Two pieces of wire and instructions are included in the kits.

On some badges it may be required to remove some epoxy around one of the battery holders, and even if it isn't, it may make soldering the bodge wires easier. You may also want to make your badge safer and more compact by removing the battery holders entirely.

I am also bringing some epoxy removal kits for free (they're just alcohol wipes and disposable vinyl gloves).

#why2025 #39c3 #meshcore #badge #bodge #soldering #epoxy #safety #congress #hashtagspam

To anyone who wants to bring their why2025 badge to 39c3, don't forget to bring your antenna. If you don't have yours anymore, I am bringing a few kits with an antenna and connector (thanks to @a51c ).

I have 7 of them with a half-decent antenna for €6, and 2 of them with a the original badge antenna for €3.

The LoRa module on the badge also requires two bodge wires to be soldered. Two pieces of wire and instructions are included in the kits.

On some badges it may be required to remove some epoxy around one of the battery holders, and even if it isn't, it may make soldering the bodge wires easier. You may also want to make your badge safer and more compact by removing the battery holders entirely.

I am also bringing some epoxy removal kits for free (they're just alcohol wipes and disposable vinyl gloves).

#why2025 #39c3 #meshcore #badge #bodge #soldering #epoxy #safety #congress #hashtagspam

To anyone who wants to bring their why2025 badge to 39c3, don't forget to bring your antenna. If you don't have yours anymore, I am bringing a few kits with an antenna and connector (thanks to @a51c ).

I have 7 of them with a half-decent antenna for €6, and 2 of them with a the original badge antenna for €3.

The LoRa module on the badge also requires two bodge wires to be soldered. Two pieces of wire and instructions are included in the kits.

On some badges it may be required to remove some epoxy around one of the battery holders, and even if it isn't, it may make soldering the bodge wires easier. You may also want to make your badge safer and more compact by removing the battery holders entirely.

I am also bringing some epoxy removal kits for free (they're just alcohol wipes and disposable vinyl gloves).

#why2025 #39c3 #meshcore #badge #bodge #soldering #epoxy #safety #congress #hashtagspam

To anyone who wants to bring their why2025 badge to 39c3, don't forget to bring your antenna. If you don't have yours anymore, I am bringing a few kits with an antenna and connector (thanks to @a51c ).

I have 7 of them with a half-decent antenna for €6, and 2 of them with a the original badge antenna for €3.

The LoRa module on the badge also requires two bodge wires to be soldered. Two pieces of wire and instructions are included in the kits.

On some badges it may be required to remove some epoxy around one of the battery holders, and even if it isn't, it may make soldering the bodge wires easier. You may also want to make your badge safer and more compact by removing the battery holders entirely.

I am also bringing some epoxy removal kits for free (they're just alcohol wipes and disposable vinyl gloves).

#why2025 #39c3 #meshcore #badge #bodge #soldering #epoxy #safety #congress #hashtagspam

Embers
I realised that I somehow never posted pictures of this set?? It has so many red/orange shades and so many reflective parts, but damn they are hard to show on camera! I hope it finds a new home soon 🔥💛

I might go through my picture backlog and post some more of the older stuff while I'm slowly easing back into dice making after a bit of a health break.

#dice #dicemaking #DiceMaker #dnd #dnddice #ttrpg #handmade #handmadedice #epoxy #art #smallbusiness #fire #fireball #flames

This commission was such a special honour! This set contains the teeth of a beloved cat that passed away. 

I will never take for granted when people choose me to create meaningful art for them and I am so humbled and thankful to be trusted with creating such a precious memento. 💜

(posted with permission)

#dice #dicemaking #DiceMaker #dnd #dnddice #ttrpg #handmade #handmadedice #epoxy #art #smallbusiness #fantasy #galaxy #cat #teeth

As a small business I can rarely afford to offer sales. But as this year is slowly coming to a close I would like to take the opportunity to say thank you for all your love and support! 💛

Also I'm hoping to avoid the holiday shipping madness a bit. So if you want to start gift shopping early, now's your chance! ✨

Code is valid until Nov 23rd, midnight (CEST).

Link to shop: http://bit.ly/4g3IiWD

#dice #dicemaking #dnd #ttrpg #handmade #epoxy #art #smallbusiness #fantasy #daggerheart #mtg

Witch Bolt
This set is still available: https://bit.ly/47p0n09

#dice #dicemaking #DiceMaker #dnd #ttrpg #handmade #epoxy #art #smallbusiness #fantasy #imogen

What could be more fitting for Halloween than this skull chonk? 💀🍄

Incidentally, this one is still available in the shop! 👀

#dice #DiceMaker #dicemaking #dnd #daggerheart #ttrpg #handmade #epoxy #art #smallbusiness #fantasy #forest #skull #spooky #halloween #cottagecore

My restock is now live! Find twelve new sets and many single dice, chonks, spindowns and hope/fear duos in the shop 👀
http://bit.ly/4g3IiWD

Set pictured: Walking Among Giants

#dice #dicemaking #dnd #daggerheart #ttrpg #pathfinder #handmade #epoxy #art #smallbusiness #fantasy #forest #fae #fog #DiceMaker #mtg

Shootingstars
This set has a really amazing reflective glitter that is soo hard to photograph 😅
(Available tomorrow)

#dice #dicemaking #dnd #ttrpg #handmade #epoxy #art #smallbusiness #fantasy #daggerheart #pathfinder #galaxy #purple #DiceMaker

Previews are now up! Everything currently showing up as "sold out" will be available on Saturday ✨

http://bit.ly/4g3IiWD

#dice #dicemaking #DiceMaker #dnd #ttrpg #handmade #epoxy #art #smallbusiness #fantasy #daggerheart #pathfinder #mtg

My biggest restock ever is coming! 👀
There will be sets, duality dice, singles, spindown D20s and even dice bags! 💫
Previews are not yet live, but will be as soon as I manage to finish everything 😅

#daggerheart #mtg #dice #dicemaking #dnd #dnddice #DiceMaker #ttrpg #handmade #epoxy #art #smallbusiness #fantasy

Birds of a Feather
This set will be in the next restock! ✨

#dice #dicemaking #DiceMaker #dnd #dnddice #ttrpg #handmade #handmadedice #epoxy #art #smallbusiness #fantasy #fae #feathers #peacock

The Mist Rises

#dice #dicemaking #DiceMaker #dnd #dnddice #ttrpg #handmade #epoxy #art #smallbusiness #fantasy #gold #fae #fog

I'm currently finishing this set for my next restock! What would you call it?

#dice #dicemaking #DiceMaker #dnd #dnddice #ttrpg #handmade #epoxy #art #smallbusiness #fantasy #gold #fae #fog

Who will I see at HeroFest Berne tomorrow or on Saturday? 🤩

#dice #dicemaking #DiceMaker #dnd #dnddice #ttrpg #handmade #handmadedice #epoxy #art #smallbusiness #fantasy #imogen