#elegoo — Public Fediverse posts

I'm looking for an easy to use beginner friendly, not much tinkering #3dprinting and came across the #elegoo #centauricarbon2.

Any advice on this? Better devices out there in this segment?

An blunt advice for #3DPrinting:

If you want to diy, look into #Voron designs, RatRig, ProForge 300 and others.

HOWEVER if you just want a printer that works, from a company that won't fuck you over, buy a #Prusa. Period. Their attempts at OSI-non-compliant licenses are a piss in the ocean compared to what #BambuLab, #Creality, #FlashForge, #Elegoo, #Anycubic and even #Sovol have been done or are still doing (to be fair, with Sovol it's mostly trashy customer support).

An blunt advice for #3DPrinting:

If you want to diy, look into #Voron designs, RatRig, ProForge 300 and others.

HOWEVER if you just want a printer that works, from a company that won't fuck you over, buy a #Prusa. Period. Their attempts at OSI-non-compliant licenses are a piss in the ocean compared to what #BambuLab, #Creality, #FlashForge, #Elegoo, #Anycubic and even #Sovol have been done or are still doing (to be fair, with Sovol it's mostly trashy customer support).

An blunt advice for #3DPrinting:

If you want to diy, look into #Voron designs, RatRig, ProForge 300 and others.

HOWEVER if you just want a printer that works, from a company that won't fuck you over, buy a #Prusa. Period. Their attempts at OSI-non-compliant licenses are a piss in the ocean compared to what #BambuLab, #Creality, #FlashForge, #Elegoo, #Anycubic and even #Sovol have been done or are still doing (to be fair, with Sovol it's mostly trashy customer support).

An blunt advice for #3DPrinting:

If you want to diy, look into #Voron designs, RatRig, ProForge 300 and others.

HOWEVER if you just want a printer that works, from a company that won't fuck you over, buy a #Prusa. Period. Their attempts at OSI-non-compliant licenses are a piss in the ocean compared to what #BambuLab, #Creality, #FlashForge, #Elegoo, #Anycubic and even #Sovol have been done or are still doing (to be fair, with Sovol it's mostly trashy customer support).

An blunt advice for #3DPrinting:

If you want to diy, look into #Voron designs, RatRig, ProForge 300 and others.

HOWEVER if you just want a printer that works, from a company that won't fuck you over, buy a #Prusa. Period. Their attempts at OSI-non-compliant licenses are a piss in the ocean compared to what #BambuLab, #Creality, #FlashForge, #Elegoo, #Anycubic and even #Sovol have been done or are still doing (to be fair, with Sovol it's mostly trashy customer support).

Elegoo Centauri Carbon : l’imprimante 3D CoreXY à 289€ 🍮
Les imprimantes fermées de type CoreXY se multiplient et la Elegoo Centauri Carbon est l'une des plus accessibles..
https://www.minimachines.net/?p=133387 #diy #elegoo

Ooh, look! I fixed a thing!

Remixed the flexible #filament #adapter for #CentauriCarbon 1 with #CANVAS and #CentauriCarbon2

https://www.printables.com/model/1720439-modified-flexible-filament-printing-adapter-for-ce

#CC1 #CC2 #Elegoo

Ooh, look! I fixed a thing!

Remixed the flexible #filament #adapter for #CentauriCarbon 1 with #CANVAS and #CentauriCarbon2

https://www.printables.com/model/1720439-modified-flexible-filament-printing-adapter-for-ce

#CC1 #CC2 #Elegoo

Ooh, look! I fixed a thing!

Remixed the flexible #filament #adapter for #CentauriCarbon 1 with #CANVAS and #CentauriCarbon2

https://www.printables.com/model/1720439-modified-flexible-filament-printing-adapter-for-ce

#CC1 #CC2 #Elegoo

Ooh, look! I fixed a thing!

Remixed the flexible #filament #adapter for #CentauriCarbon 1 with #CANVAS and #CentauriCarbon2

https://www.printables.com/model/1720439-modified-flexible-filament-printing-adapter-for-ce

#CC1 #CC2 #Elegoo

Ooh, look! I fixed a thing!

Remixed the flexible #filament #adapter for #CentauriCarbon 1 with #CANVAS and #CentauriCarbon2

https://www.printables.com/model/1720439-modified-flexible-filament-printing-adapter-for-ce

#CC1 #CC2 #Elegoo

Delivery came in. There goes my evening's productivity.

#3DPrinting #elegoo #canvas #rfid

Delivery came in. There goes my evening's productivity.

#3DPrinting #elegoo #canvas #rfid

Delivery came in. There goes my evening's productivity.

#3DPrinting #elegoo #canvas #rfid

Delivery came in. There goes my evening's productivity.

#3DPrinting #elegoo #canvas #rfid

Delivery came in. There goes my evening's productivity.

#3DPrinting #elegoo #canvas #rfid

Elegoo CANVAS : le multifilament pour Centauri Carbon à 45€
Elegoo CANVAS est une grande nouvelle si vous avez acheté une imprimante Centauri Carbon, l'accessoire permet de la passer de 1 à 4 filaments..
https://www.minimachines.net/?p=140939 #elegoo #impression3d

Druk 3D to taki przywilej! Kupiłem sobie nowy mieszek oraz gałkę zmiany biegów do mojego #subaru. Ani jedno, ani drugie nie pasowało. Ale wymyśliłem, że mogę zbudować adapter nakręcany na drążek, do którego przykręcę zarówno mieszek, jak i gałkę. Trochę dłubania z Claude, zabawy z pomiarami, doborem parametrów wydruku i udało się pożenić ze sobą te dwa elementy. Bez drukarki 3D kompletnie nie byłbym w stanie założyć ani jednego, ani drugiego
#druk3d #3dprinting #scad #elegoo

Druk 3D to taki przywilej! Kupiłem sobie nowy mieszek oraz gałkę zmiany biegów do mojego #subaru. Ani jedno, ani drugie nie pasowało. Ale wymyśliłem, że mogę zbudować adapter nakręcany na drążek, do którego przykręcę zarówno mieszek, jak i gałkę. Trochę dłubania z Claude, zabawy z pomiarami, doborem parametrów wydruku i udało się pożenić ze sobą te dwa elementy. Bez drukarki 3D kompletnie nie byłbym w stanie założyć ani jednego, ani drugiego
#druk3d #3dprinting #scad #elegoo

Druk 3D to taki przywilej! Kupiłem sobie nowy mieszek oraz gałkę zmiany biegów do mojego #subaru. Ani jedno, ani drugie nie pasowało. Ale wymyśliłem, że mogę zbudować adapter nakręcany na drążek, do którego przykręcę zarówno mieszek, jak i gałkę. Trochę dłubania z Claude, zabawy z pomiarami, doborem parametrów wydruku i udało się pożenić ze sobą te dwa elementy. Bez drukarki 3D kompletnie nie byłbym w stanie założyć ani jednego, ani drugiego
#druk3d #3dprinting #scad #elegoo

Druk 3D to taki przywilej! Kupiłem sobie nowy mieszek oraz gałkę zmiany biegów do mojego #subaru. Ani jedno, ani drugie nie pasowało. Ale wymyśliłem, że mogę zbudować adapter nakręcany na drążek, do którego przykręcę zarówno mieszek, jak i gałkę. Trochę dłubania z Claude, zabawy z pomiarami, doborem parametrów wydruku i udało się pożenić ze sobą te dwa elementy. Bez drukarki 3D kompletnie nie byłbym w stanie założyć ani jednego, ani drugiego
#druk3d #3dprinting #scad #elegoo

Druk 3D to taki przywilej! Kupiłem sobie nowy mieszek oraz gałkę zmiany biegów do mojego #subaru. Ani jedno, ani drugie nie pasowało. Ale wymyśliłem, że mogę zbudować adapter nakręcany na drążek, do którego przykręcę zarówno mieszek, jak i gałkę. Trochę dłubania z Claude, zabawy z pomiarami, doborem parametrów wydruku i udało się pożenić ze sobą te dwa elementy. Bez drukarki 3D kompletnie nie byłbym w stanie założyć ani jednego, ani drugiego
#druk3d #3dprinting #scad #elegoo

3. Elegoo Centauri Carbon (2)

Carbon can be used with Orca, Carbon 2 requires their slicer which is available only for macos and windows.

There were attempts to get Carbon 2 into Orca but that's huge set of changes as it looks like more stuff is done on a host instead of on the printer.

4. No idea yet

Have to take a look at any other options. Or revive my x86-64 desktop and abandon aarch64 desktop after less than a year of use.

#3dprinting #elegoo

Elegoo Centauri Carbon 2 : impression couleur CoreXY à 399€
C'est fait, la Elegoo Centauri Carbon 2 combo est annoncée. La nouvelle imprimante est d'ores et déjà disponible à un prix plancher..
https://www.minimachines.net/?p=139051 #elegoo #impression3d

The issue with my Elegoo Ultra 16K is back, and I have tracked down to Z-axis judder (i.e. stepper motor skipping), which seemed to happen every time it changes direction.

Stripped down and greased and run up/down hundreds of times, and seems to maybe have cleared.

Now for a test print

[test print looks ok]

#elegoo #3d

Elegoo Centauri Carbon 2 : impression couleur CoreXY à 399€
C'est fait, la Elegoo Centauri Carbon 2 combo est annoncée. La nouvelle imprimante est d'ores et déjà disponible à un prix plancher..
https://www.minimachines.net/?p=139051 #elegoo #impression3d

Owing to my shadows of brimstone addiction, I decided to try making another token box using my 3-D printer. This one came out a lot better and I like the shape, plus the lid. It took around six hours to print in water washable resin, but I could have done it faster. If I wasn’t such a perfectionist who needed 0.05 mm layers.🤣
#shadowsofbrimstone #3dprinting #Elegoo #gaming #tabletopgames

Elegoo Centauri Carbon 2 : impression couleur CoreXY à 399€ !
C'est fait, la Elegoo Centauri Carbon 2 combo est annoncée. La nouvelle imprimante est d'ores et déjà disponible à un prix plancher..
https://www.minimachines.net/?p=139051 #elegoo #impression3d

Elegoo Centauri Carbon : une imprimante 3D CoreXY à 289€ 🍮
Les imprimantes fermées de type CoreXY se multiplient et la Elegoo Centauri Carbon est l'une des plus accessibles..
https://www.minimachines.net/?p=133387 #diy #elegoo

Elegoo Centauri Carbon : une imprimante 3D CoreXY à 299€ 🍮
Les imprimantes fermées de type CoreXY se multiplient et la Elegoo Centauri Carbon est l'une des plus accessibles..
https://www.minimachines.net/?p=133387 #diy #elegoo

Elegoo Centauri Carbon : une imprimante 3D CoreXY à 279€ 🍮
Les imprimantes fermées de type CoreXY se multiplient et la Elegoo Centauri Carbon est l'une des plus accessibles..
https://www.minimachines.net/?p=133387 #diy #elegoo

Elegoo Centauri Carbon : une imprimante 3D CoreXY à 279€ 🍮
Les imprimantes fermées de type CoreXY se multiplient et la Elegoo Centauri Carbon est l'une des plus accessibles..
https://www.minimachines.net/?p=133387 #diy #elegoo

Anyone following know anything about #Elegoo Resin printer (Saturn 4 Ultra 16k).

It has been working well. But has now run in to as problem. Film replaced (twice now). And one print was fine (a Yoda).

But other prints are not fine.

Symptoms are odd. Just printed a model that is 234 layers, 11.65mm. The print is 2.8mm only, but no residue on the film, so not a matter of being detached.

The detail printed in 2.8mm covers 135 layers, 6.75mm, so is squashed, but otherwise perfect that far.
Help!

This is my take on the iconic Escape Pod from the Tantive IV, the small craft that carried C-3PO and R2-D2 to safety at the very start of A New Hope. Designed for emergencies, the pod is compact, cylindrical, and brutally functional.

Designed in Blender 5.0, printed in @bambulabs_official P1S with @Elegoo 3D Official grey rapid PLA+.

Files for 3D print available at:
https://www.patreon.com/cw/playaction

#StarWars #3dprint #Blender #Bambulab #elegoo

Elegoo Centauri Carbon 2 : impression couleur CoreXY à 439€ !
C'est fait, la Elegoo Centauri Carbon 2 combo est annoncée. La nouvelle imprimante est d'ores et déjà disponible à un prix plancher..
https://www.minimachines.net/?p=139051 #elegoo #impression3d

A “small” issue with my Elegoo Neptune 4 Plus last night. Took the hotend apart this morning to remove filament. Quickly found that one of the temperature sensors is broken. Tools down, replacement ordered.

#3DPrinting #Elegoo

Elegoo Centauri Carbon 2 : impression couleur CoreXY à 439€
C'est fait, la Elegoo Centauri Carbon 2 combo est annoncée. La nouvelle imprimante est d'ores et déjà disponible à un prix plancher..
https://www.minimachines.net/?p=139051 #elegoo #impression3d

Hold onto your filaments! Elegoo just dropped the Centauri Carbon 2 Combo 3D printer, breaking new ground with its integrated color system.

No more monochrome prints unless you *want* them. What's your dream multi-color print project?

#3DPrinter #ColorTech #Hardware #Elegoo #FuturePrinting
https://www.cnet.com/tech/computing/elegoo-centauri-carbon-2-combo-3d-printer-color-system-attached/

Probably it was possible to buy a cheap shelf in IKEA, but where is fun in it?

#3d #print3d #elegoo #fun

And have I told ya lately how kickass my new 3dprinter is?
250mm/s.. thats how much 😁

#maker #3dprinting
#Neptune4Plus
#Elegoo

And have I told ya lately how kickass my new 3dprinter is?
250mm/s.. thats how much 😁

#maker #3dprinting
#Neptune4Plus
#Elegoo

And have I told ya lately how kickass my new 3dprinter is?
250mm/s.. thats how much 😁

#maker #3dprinting
#Neptune4Plus
#Elegoo

And have I told ya lately how kickass my new 3dprinter is?
250mm/s.. thats how much 😁

#maker #3dprinting
#Neptune4Plus
#Elegoo

And have I told ya lately how kickass my new 3dprinter is?
250mm/s.. thats how much 😁

#maker #3dprinting
#Neptune4Plus
#Elegoo

Someone remind me to NOT buy an #Elegoo #CentauriCarbon2 even if @biglesp gets one

I mean - who needs more than one type of filament/colour in one print?

#3DPrinting

Elegoo Centauri Carbon : une imprimante 3D CoreXY à 279€ 🍮
Les imprimantes fermées de type CoreXY se multiplient et la Elegoo Centauri Carbon est l'une des plus accessibles..
https://www.minimachines.net/?p=133387 #diy #elegoo

Elegoo Centauri Carbon : une imprimante 3D CoreXY à 279€ 🍮
Les imprimantes fermées de type CoreXY se multiplient et la Elegoo Centauri Carbon est l'une des plus accessibles..
https://www.minimachines.net/?p=133387 #diy #elegoo

One of the firsts prints on my #elegoo #centauri #carbon #3d #printer - pottery tool for my wife :)
To be exact, it's a base and a handle to ease creating bowls from clay by molding or pressing.

https://video.marcin-lis.pl/v/cmjq5kkkAsvv7KNXfqgU6V

One of the firsts prints on my #elegoo #centauri #carbon #3d #printer - pottery tool for my wife :)
To be exact, it's a base and a handle to ease creating bowls from clay by molding or pressing.

https://video.marcin-lis.pl/v/cmjq5kkkAsvv7KNXfqgU6V