#diy-nas — Public Fediverse posts
Live and recent posts from across the Fediverse tagged #diy-nas, aggregated by home.social.
-
Today’s achievement - my custom-built server got much cooler because I replaced this SAS controller from hell with a tiny PCI-E to 2 х SATA III adapter with a 9125 chip.
Previously, I was convinced by #TrueNAS forums and Stack Overflow that 9125-based controllers wouldn’t work for TrueNAS. It may be true for TrueNAS, but it worked well with #Proxmox.
#homelab #diynas #pcbuild #homeserver -
This thing is so cool from the inside. I want to leave it like this every time I open it.
This is my #DIY #NAS I built in #Jonsbo N1 case. #TrueNas in the past, #Proxmox for now.4 HDDs and 2 SSDs. 64 GB of RAM and 12-core Intel i5.
One thing I don’t like is a PCIe SAS controller in the bottom that is huge and gets very hot. It’s there because the motherboard had only 4 SATA ports. I want to replace that controller with something smaller and cooler.
#pcbuild #diynas #homelab #jonsbon1 -
Ah, the annual "DIY NAS" article for when your storage needs outgrow your delusions of grandeur. 🤖💾 Now featuring more acronyms and tech specs than anyone actually asked for, because who doesn't want a personal server farm in their living room? 🌾📦
https://blog.briancmoses.com/2025/11/diy-nas-2026-edition.html #DIYNAS #PersonalServer #HomeStorage #TechSpecs #StorageSolutions #HackerNews #ngated -
This #DIY #NAS is ready to be shown off at @TexasLinuxFest on October 3rd and 4th.
Find me there and check out the #TXLF #diynas ! https://2025.texaslinuxfest.org/
-
Yesterday's unfortunate discovery of a #3Dprinting omission put the kibosh on finishing this #diynas.
But it won't stop me from hooking everything up and to start putting it through some burn-in testing!
-
The outer enclosure is complete and the SFX PSU has been installed. #diynas
-
Assembling the outer walls of the #3Dprinted #diynas case.
-
Filling the 2.5" bays to satisfy the "S" in NAS #diynas
-
Motherboard, RAM, NVMe SSD, and M.2 SATA card installed. #diynas
-
-
-
The theme of tonight's North Texas Makers meeting is 3D-printing, so I'm taking a few things to show off! #diynas #esp32 #bananaforscale
-
N5 Mini: Build your own 5-bay NAS using a mini PC mainboard and 3D printed chassis
There are a growing number of network-attached storage (NAS) hardware available from Chinese companies like UGREEN, Beelink, AOOSTAR, and MINISFORUM. But why buy an entirely new computer if you’ve already got a spare mini PC lying around?
The N5 Mini is a DIY network-attached storage device that combines some off-the-shelf components, 3D printed parts, and whatever mini PC you’ve already […]
-
This mini ITX board combines Alder Lake-N processor with 10 Gb and 2.5 GbE networking and up to 8 storage devices (2 x NVMe + 6 x SATA)
A new mini ITX motherboard making the rounds on AliExpress is designed for folks looking to build their own network-attached storage, firewall, or other appliance-like PC.
The MW-100-NAS board features a 6-watt Intel Alder Lake-N processor, support for up to 32GB of DDR5-4800 memory, and up to eight storage devices thanks to 6 SATA 3.0 connectors and two M.2 2280 slots for PCIe NVMe storage. […]
-
AOOSTAR WTR Pro is a 4-bay NAS with an Intel N100 processor, 2.5 GbE Ethernet, and an M.2 2280 slot
The AOOSTAR WTR Pro is small desktop computer that’s positioned for use as a network-attached storage (NAS) device thanks to its support for up to four 3.5 inch hard drives or SSDs and an M.2 slot for an optional PCIe NVMe SSD.
But it’s also a versatile little computer with an Intel N100 Alder Lake-N processor, broad support for a wide range of […]
