home.social

#delta — Public Fediverse posts

Live and recent posts from across the Fediverse tagged #delta, aggregated by home.social.

  1. “The previous flight to Gatwick canceled due to a mechanical issue. Our flight is delayed. Now, not only delayed but replaced with a smaller plane. We can’t figure this out, so everyone from both flights with a ticket just line up and we’ll take as many as fit on the plane. Sorry.”

    #TrueStory #Delta
    #UghOnAnAirplaneAnything
    #HashTagGames

  2. “The previous flight to Gatwick canceled due to a mechanical issue. Our flight is delayed. Now, not only delayed but replaced with a smaller plane. We can’t figure this out, so everyone from both flights with a ticket just line up and we’ll take as many as fit on the plane. Sorry.”

    #TrueStory #Delta
    #UghOnAnAirplaneAnything
    #HashTagGames

  3. “The previous flight to Gatwick canceled due to a mechanical issue. Our flight is delayed. Now, not only delayed but replaced with a smaller plane. We can’t figure this out, so everyone from both flights with a ticket just line up and we’ll take as many as fit on the plane. Sorry.”

    #TrueStory #Delta
    #UghOnAnAirplaneAnything
    #HashTagGames

  4. “The previous flight to Gatwick canceled due to a mechanical issue. Our flight is delayed. Now, not only delayed but replaced with a smaller plane. We can’t figure this out, so everyone from both flights with a ticket just line up and we’ll take as many as fit on the plane. Sorry.”

    #TrueStory #Delta
    #UghOnAnAirplaneAnything
    #HashTagGames

  5. “The previous flight to Gatwick canceled due to a mechanical issue. Our flight is delayed. Now, not only delayed but replaced with a smaller plane. We can’t figure this out, so everyone from both flights with a ticket just line up and we’ll take as many as fit on the plane. Sorry.”

    #TrueStory #Delta
    #UghOnAnAirplaneAnything
    #HashTagGames

  6. Hype for the Future 205/284: Village of Garden, Michigan

    Overview The Village of Garden is a village located along Garden Bay and the larger Big Bay de Noc of Lake Michigan in Delta County, Michigan, home to Garden Grove Retreat and Lodging and the Village Artisans/Garden Gallery. To the south is Poverty Island, home to the local Poverty Island Lighthouse.

    novatopflex.wordpress.com/2026

  7. Fun fact: In 2019, Delta urged it's employees to not unionize, arguing that they would be better of buying a video game console instead of paying union dues. It's probably one of the most insane arguments about this I've ever heard and, yes, there's a picture of the poster making that argument.

    nbcnews.com/business/travel/de

    #Employment #Union #Unions #Delta #Aviation

  8. Fun fact: In 2019, Delta urged it's employees to not unionize, arguing that they would be better of buying a video game console instead of paying union dues. It's probably one of the most insane arguments about this I've ever heard and, yes, there's a picture of the poster making that argument.

    nbcnews.com/business/travel/de

    #Employment #Union #Unions #Delta #Aviation

  9. Fun fact: In 2019, Delta urged it's employees to not unionize, arguing that they would be better of buying a video game console instead of paying union dues. It's probably one of the most insane arguments about this I've ever heard and, yes, there's a picture of the poster making that argument.

    nbcnews.com/business/travel/de

    #Employment #Union #Unions #Delta #Aviation

  10. Fun fact: In 2019, Delta urged it's employees to not unionize, arguing that they would be better of buying a video game console instead of paying union dues. It's probably one of the most insane arguments about this I've ever heard and, yes, there's a picture of the poster making that argument.

    nbcnews.com/business/travel/de

    #Employment #Union #Unions #Delta #Aviation

  11. Fun fact: In 2019, Delta urged it's employees to not unionize, arguing that they would be better of buying a video game console instead of paying union dues. It's probably one of the most insane arguments about this I've ever heard and, yes, there's a picture of the poster making that argument.

    nbcnews.com/business/travel/de

    #Employment #Union #Unions #Delta #Aviation

  12. The End of the Short-Haul Complimentary Service: A Shift in Cabin Logic

    Delta Air Lines stopped giving free snacks and drinks to economy passengers on flights shorter than 350 miles starting May 19, 2026. This change affects many travelers.

    #Delta, #AirlineNews, #TravelUpdate, #EconomyClass, #ShortHaul

    newsletter.tf/delta-stops-free

  13. I've been 3D-printing for around five and a half years. So I'm not a rookie, but I just made a #rookie #mistake.

    I've spent the last couple of weeks making compartments and dividers and such for the toolboxes I take to the Repair Cafe. Lots of test #prints to check fits and footprints, full prints, changes to design based on lessons learned during use at the last cafe, etc. I've put around three kilograms of #filament through my printer in that time.

    Then, in the last couple days, I started having various problems. At first they only showed up on big prints - #adhesion and #curling, which I've had before when pushing the limits of my bed size. But prints seemed to be getting #sloppier, and I had a couple of spaghetti explosions.

    Tonight, I finally took the #hotend apart and looked at it closely - it's very difficult to do when the printer is fully assembled, because it's a #delta printer.

    Lo and behold, the nozzle appeared worn. And that can account for all the problems.

    I should have checked this sooner - but I've only been printing plain #PLA, nothing abrasive, so I didn't think of it. Lesson learned.

    Pardon the shitty photo from a cheap digital magnifier. The old #nozzle #orifice is about 1.5x the diameter of the new one - so 2.25x the area. No wonder plastic was going everywhere but where it should go!

    Seems to be printing *much* better with a new nozzle.

    #RookieMistake #LessonLearned #3DPrinting #FDM

  14. I've been 3D-printing for around five and a half years. So I'm not a rookie, but I just made a #rookie #mistake.

    I've spent the last couple of weeks making compartments and dividers and such for the toolboxes I take to the Repair Cafe. Lots of test #prints to check fits and footprints, full prints, changes to design based on lessons learned during use at the last cafe, etc. I've put around three kilograms of #filament through my printer in that time.

    Then, in the last couple days, I started having various problems. At first they only showed up on big prints - #adhesion and #curling, which I've had before when pushing the limits of my bed size. But prints seemed to be getting #sloppier, and I had a couple of spaghetti explosions.

    Tonight, I finally took the #hotend apart and looked at it closely - it's very difficult to do when the printer is fully assembled, because it's a #delta printer.

    Lo and behold, the nozzle appeared worn. And that can account for all the problems.

    I should have checked this sooner - but I've only been printing plain #PLA, nothing abrasive, so I didn't think of it. Lesson learned.

    Pardon the shitty photo from a cheap digital magnifier. The old #nozzle #orifice is about 1.5x the diameter of the new one - so 2.25x the area. No wonder plastic was going everywhere but where it should go!

    Seems to be printing *much* better with a new nozzle.

    #RookieMistake #LessonLearned #3DPrinting #FDM

  15. I've been 3D-printing for around five and a half years. So I'm not a rookie, but I just made a #rookie #mistake.

    I've spent the last couple of weeks making compartments and dividers and such for the toolboxes I take to the Repair Cafe. Lots of test #prints to check fits and footprints, full prints, changes to design based on lessons learned during use at the last cafe, etc. I've put around three kilograms of #filament through my printer in that time.

    Then, in the last couple days, I started having various problems. At first they only showed up on big prints - #adhesion and #curling, which I've had before when pushing the limits of my bed size. But prints seemed to be getting #sloppier, and I had a couple of spaghetti explosions.

    Tonight, I finally took the #hotend apart and looked at it closely - it's very difficult to do when the printer is fully assembled, because it's a #delta printer.

    Lo and behold, the nozzle appeared worn. And that can account for all the problems.

    I should have checked this sooner - but I've only been printing plain #PLA, nothing abrasive, so I didn't think of it. Lesson learned.

    Pardon the shitty photo from a cheap digital magnifier. The old #nozzle #orifice is about 1.5x the diameter of the new one - so 2.25x the area. No wonder plastic was going everywhere but where it should go!

    Seems to be printing *much* better with a new nozzle.

    #RookieMistake #LessonLearned #3DPrinting #FDM

  16. I've been 3D-printing for around five and a half years. So I'm not a rookie, but I just made a #rookie #mistake.

    I've spent the last couple of weeks making compartments and dividers and such for the toolboxes I take to the Repair Cafe. Lots of test #prints to check fits and footprints, full prints, changes to design based on lessons learned during use at the last cafe, etc. I've put around three kilograms of #filament through my printer in that time.

    Then, in the last couple days, I started having various problems. At first they only showed up on big prints - #adhesion and #curling, which I've had before when pushing the limits of my bed size. But prints seemed to be getting #sloppier, and I had a couple of spaghetti explosions.

    Tonight, I finally took the #hotend apart and looked at it closely - it's very difficult to do when the printer is fully assembled, because it's a #delta printer.

    Lo and behold, the nozzle appeared worn. And that can account for all the problems.

    I should have checked this sooner - but I've only been printing plain #PLA, nothing abrasive, so I didn't think of it. Lesson learned.

    Pardon the shitty photo from a cheap digital magnifier. The old #nozzle #orifice is about 1.5x the diameter of the new one - so 2.25x the area. No wonder plastic was going everywhere but where it should go!

    Seems to be printing *much* better with a new nozzle.

    #RookieMistake #LessonLearned #3DPrinting #FDM

  17. I've been 3D-printing for around five and a half years. So I'm not a rookie, but I just made a #rookie #mistake.

    I've spent the last couple of weeks making compartments and dividers and such for the toolboxes I take to the Repair Cafe. Lots of test #prints to check fits and footprints, full prints, changes to design based on lessons learned during use at the last cafe, etc. I've put around three kilograms of #filament through my printer in that time.

    Then, in the last couple days, I started having various problems. At first they only showed up on big prints - #adhesion and #curling, which I've had before when pushing the limits of my bed size. But prints seemed to be getting #sloppier, and I had a couple of spaghetti explosions.

    Tonight, I finally took the #hotend apart and looked at it closely - it's very difficult to do when the printer is fully assembled, because it's a #delta printer.

    Lo and behold, the nozzle appeared worn. And that can account for all the problems.

    I should have checked this sooner - but I've only been printing plain #PLA, nothing abrasive, so I didn't think of it. Lesson learned.

    Pardon the shitty photo from a cheap digital magnifier. The old #nozzle #orifice is about 1.5x the diameter of the new one - so 2.25x the area. No wonder plastic was going everywhere but where it should go!

    Seems to be printing *much* better with a new nozzle.

    #RookieMistake #LessonLearned #3DPrinting #FDM

  18. Eurovision key moments: from Euro-pop to Euro-slop as Delta Goodrem makes Australia proud

    Eurovision is done and dusted for another year, with Bulgaria taking out the top spot, followed by Israel…
    #Europe #EU #Eurovision #bestbits #bestmoments #catch-up #Delta #DeltaGoodrem #Eclipse #eurovisionsongcontest #EurovisionSongContest2026 #Eurovisionwinner #music #summary #takeaways #vienna
    europesays.com/europe/44922/

  19. Hantavirus passengers about to touch down in WA | ABC News Top Stories

    Six people from the cruise ship at the centre of the hantavirus outbreak are about to touch down…
    #NewsBeep #News #Health #angustaylor #AU #Australia #cruiseship #delta #DeltaGoodrem #Eurovision #hantavirus #migration #Perth #tax #WA
    newsbeep.com/au/671763/

  20. Hantavirus passengers about to touch down in WA | ABC News Top Stories

    Six people from the cruise ship at the centre of the hantavirus outbreak are about to touch down…
    #NewsBeep #News #Health #angustaylor #AU #Australia #cruiseship #delta #DeltaGoodrem #Eurovision #hantavirus #migration #Perth #tax #WA
    newsbeep.com/au/671763/